Hi again,
Here's the new results:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and uses an
embedded config file:
---------------------------------------------------------------------------
search.fs_uuid 5f3c7b36-bc95-4c1d-b423-5278faa03d48 root
set
prefix=($root)/boot/grub---------------------------------------------------
-----------------------------.
=> Windows is installed in the MBR of /dev/sdb.
=> Windows is installed in the MBR of /dev/sdc.
=> Windows is installed in the MBR of /dev/sdd.
=> Windows is installed in the MBR of /dev/sde.
sda1: __________________________________________________ ________________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed: mount: unknown filesystem type ''
sdb1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sdc1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /Boot/BCD
sdc2: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files: /Windows/System32/winload.exe
sdd1: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdd2: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdd5: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sde1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 150.0 GB, 150039945216 bytes
16 heads, 63 sectors/track, 290721 cylinders, total 293046768 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 293,044,719 293,044,657 42 SFS
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 63 976,768,064 976,768,002 7 NTFS / exFAT / HPFS
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 60.0 GB, 60022480896 bytes
255 heads, 63 sectors/track, 7297 cylinders, total 117231408 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdc1 * 2,048 206,847 204,800 7 NTFS / exFAT / HPFS
/dev/sdc2 206,848 117,225,471 117,018,624 7 NTFS / exFAT / HPFS
Drive: sdd __________________________________________________ ___________________
Disk /dev/sdd: 37.0 GB, 37019566080 bytes
255 heads, 63 sectors/track, 4500 cylinders, total 72303840 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdd1 2,048 68,361,422 68,359,375 83 Linux
/dev/sdd2 68,362,238 72,302,591 3,940,354 5 Extended
/dev/sdd5 68,362,240 72,302,591 3,940,352 82 Linux swap / Solaris
Drive: sde __________________________________________________ ___________________
Disk /dev/sde: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sde1 * 63 234,436,544 234,436,482 7 NTFS / exFAT / HPFS
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda2 64F01914F018EDD4 ntfs 1337 Raptor
/dev/sdb1 426036CE6036C905 ntfs Kæmpe lager
/dev/sdc1 9A4886DF4886B991 ntfs System Reserved
/dev/sdc2 44809068809061EA ntfs OS
/dev/sdd1 5f3c7b36-bc95-4c1d-b423-5278faa03d48 ext4
/dev/sdd5 72c63c76-8099-4bd9-8442-41f922b7cd13 swap
/dev/sde1 F64072D040729759 ntfs Lager
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sr0 /cdrom iso9660 (ro,noatime)
=========================== sdd1/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(/dev/sdd,msdos1)'
search --no-floppy --fs-uuid --set=root 5f3c7b36-bc95-4c1d-b423-5278faa03d48
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sdd,msdos1)'
search --no-floppy --fs-uuid --set=root 5f3c7b36-bc95-4c1d-b423-5278faa03d48
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdd,msdos1)'
search --no-floppy --fs-uuid --set=root 5f3c7b36-bc95-4c1d-b423-5278faa03d48
linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=5f3c7b36-bc95-4c1d-b423-5278faa03d48 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic-pae
}
menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sdd,msdos1)'
search --no-floppy --fs-uuid --set=root 5f3c7b36-bc95-4c1d-b423-5278faa03d48
echo 'Loading Linux 2.6.38-8-generic-pae ...'
linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=5f3c7b36-bc95-4c1d-b423-5278faa03d48 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic-pae
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sdd,msdos1)'
search --no-floppy --fs-uuid --set=root 5f3c7b36-bc95-4c1d-b423-5278faa03d48
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sdd,msdos1)'
search --no-floppy --fs-uuid --set=root 5f3c7b36-bc95-4c1d-b423-5278faa03d48
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sdc1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sdc,msdos1)'
search --no-floppy --fs-uuid --set=root 9A4886DF4886B991
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sdd1/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/dev/sdd1 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdd5 during installation
UUID=72c63c76-8099-4bd9-8442-41f922b7cd13 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sdd1: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
10.216342926 = 10.969714688 boot/grub/core.img 1
18.305446625 = 19.655323648 boot/grub/grub.cfg 1
0.926956177 = 0.995311616 boot/initrd.img-2.6.38-8-generic-pae 1
0.688903809 = 0.739704832 boot/vmlinuz-2.6.38-8-generic-pae 1
0.926956177 = 0.995311616 initrd.img 1
0.688903809 = 0.739704832 vmlinuz 1
=============================== StdErr Messages: ===============================
unlzma: Decoder error