gpost3
June 5th, 2011, 10:38 AM
hi folks.
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x674f31a3
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13053 104845534+ 7 HPFS/NTFS
/dev/sda2 13054 55262 339043792+ f W95 Ext'd (LBA)
/dev/sda3 55263 60802 44489728 83 Linux
/dev/sda5 13054 47520 276856146 7 HPFS/NTFS
/dev/sda6 47521 55262 62187583+ 83 Linux
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe515cf51
Device Boot Start End Blocks Id System
/dev/sdb1 1 60801 488383024+ f W95 Ext'd (LBA)
/dev/sdb5 1 60801 488383008+ 7 HPFS/NTFS
sda6 is Ubuntu partition
sda5 is my data partition
and finally...
sdb5 is my backup partition
I don't have hardware raid controller. I have two hard drives, both are 500 gb. I want sda5 and sdb5 to run on raid 1 for data mirroring. I want to split sda6 and run it on raid 0 with another equal sized partition on sdb. Is this possible? what software will I need to do this? is this raid1+0 configuration or is it raid0+1 configuration?
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x674f31a3
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13053 104845534+ 7 HPFS/NTFS
/dev/sda2 13054 55262 339043792+ f W95 Ext'd (LBA)
/dev/sda3 55263 60802 44489728 83 Linux
/dev/sda5 13054 47520 276856146 7 HPFS/NTFS
/dev/sda6 47521 55262 62187583+ 83 Linux
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe515cf51
Device Boot Start End Blocks Id System
/dev/sdb1 1 60801 488383024+ f W95 Ext'd (LBA)
/dev/sdb5 1 60801 488383008+ 7 HPFS/NTFS
sda6 is Ubuntu partition
sda5 is my data partition
and finally...
sdb5 is my backup partition
I don't have hardware raid controller. I have two hard drives, both are 500 gb. I want sda5 and sdb5 to run on raid 1 for data mirroring. I want to split sda6 and run it on raid 0 with another equal sized partition on sdb. Is this possible? what software will I need to do this? is this raid1+0 configuration or is it raid0+1 configuration?