RheaHS
May 31st, 2011, 11:48 AM
Ended up with major problems last night, after a really messed up upgrade and a power cut, now nothing will boot.
I used the Live USB to see if I could check for faults, or at the worst format and reinstall, but my Hard Drives are being seen but not mounting (getting various errors for this from (Daemon is inhibited) to Busy.
That I've been looking around here for answers for, but still can't solve what is happening.
My drives are seen in BIOS, Disk Utility, etc. , but when I try to mount, it seems to work but none of the three can be accessed, the Daemon errors come then. All disks show as healthy, except one with a bad sector. I can't fix that either right now.
When I try to run gparted or the install program, it freezes, and won't go past searching for drives.
Here are the results from Boot Script
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
=> No boot loader is installed in the MBR of /dev/sdc.
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdd.
sda1: __________________________________________________ ________________________
File system: vfat
Boot sector type: Windows XP: FAT32
Boot sector info: According to the info in the boot sector, sda1 starts
at sector 0. But according to the info from fdisk,
sda1 starts at sector 63.
Operating System:
Boot files:
sdb1: __________________________________________________ ________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: According to the info in the boot sector, sdb1 starts
at sector 0. But according to the info from fdisk,
sdb1 starts at sector 2048.
Operating System:
Boot files:
sdb2: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdd1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.03 2010-10-22 ........>..sr>.......S..:...0...~.....~...f...M.f.f....f..0~....>E}.u......
Boot sector info: Syslinux looks at sector 3328 of /dev/sdd1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 312,576,704 312,576,642 b W95 FAT32
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 231,071,743 231,069,696 83 Linux
/dev/sdb2 231,073,790 234,440,703 3,366,914 5 Extended
/dev/sdb5 231,073,792 234,440,703 3,366,912 82 Linux swap / Solaris
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
Drive: sdd __________________________________________________ ___________________
Disk /dev/sdd: 2006 MB, 2006974464 bytes
16 heads, 32 sectors/track, 7656 cylinders, total 3919872 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdd1 * 8,064 3,919,871 3,911,808 6 FAT16
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 6853-5BA9 vfat LaCie
/dev/sdb1 15AD-B6A6 vfat 120GB HDD
/dev/sdb5 1748cf3d-124c-4aa0-b591-96ea3d102c02 swap
/dev/sdc1 a237f411-43d8-4739-a161-2dac5757d3c3 ext4
/dev/sdc5 f72a56de-fd17-4b90-a09b-d62a1bb1be04 swap
/dev/sdd1 FEE3-850A vfat PENDRIVE
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdd1 /cdrom vfat (rw,relatime,fmask=0022,dmask=0022,codepage=cp437, iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
========================= sdd1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
# If you would like to use the new menu and be presented with the option to install or run from USB at startup, remove # from the following line. This line was commented out (by request of many) to allow the old menu to be presented and to enable booting straight into the Live Environment!
# ui gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdd1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdd1: Version of COM32(R) files used by Syslinux: ===============
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
unlzma: Decoder error
/home/ubuntu/Desktop/boot_info_script.sh: line 1579: [: 2.73495e+09: integer expression expected
I can post any other information that is needed, it was all working fine before this hiccup, had it all recognised.
I used the Live USB to see if I could check for faults, or at the worst format and reinstall, but my Hard Drives are being seen but not mounting (getting various errors for this from (Daemon is inhibited) to Busy.
That I've been looking around here for answers for, but still can't solve what is happening.
My drives are seen in BIOS, Disk Utility, etc. , but when I try to mount, it seems to work but none of the three can be accessed, the Daemon errors come then. All disks show as healthy, except one with a bad sector. I can't fix that either right now.
When I try to run gparted or the install program, it freezes, and won't go past searching for drives.
Here are the results from Boot Script
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> No boot loader is installed in the MBR of /dev/sda.
=> Grub2 (v1.99) is installed in the MBR of /dev/sdb and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos1)/boot/grub on this drive.
=> No boot loader is installed in the MBR of /dev/sdc.
=> Syslinux MBR (3.61-4.03) is installed in the MBR of /dev/sdd.
sda1: __________________________________________________ ________________________
File system: vfat
Boot sector type: Windows XP: FAT32
Boot sector info: According to the info in the boot sector, sda1 starts
at sector 0. But according to the info from fdisk,
sda1 starts at sector 63.
Operating System:
Boot files:
sdb1: __________________________________________________ ________________________
File system: vfat
Boot sector type: FAT32
Boot sector info: According to the info in the boot sector, sdb1 starts
at sector 0. But according to the info from fdisk,
sdb1 starts at sector 2048.
Operating System:
Boot files:
sdb2: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sdd1: __________________________________________________ ________________________
File system: vfat
Boot sector type: SYSLINUX 4.03 2010-10-22 ........>..sr>.......S..:...0...~.....~...f...M.f.f....f..0~....>E}.u......
Boot sector info: Syslinux looks at sector 3328 of /dev/sdd1 for its
second stage. SYSLINUX is installed in the directory.
The integrity check of the ADV area failed. No errors
found in the Boot Parameter Block.
Operating System:
Boot files: /syslinux/syslinux.cfg /ldlinux.sys
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 63 312,576,704 312,576,642 b W95 FAT32
Drive: sdb __________________________________________________ ___________________
Disk /dev/sdb: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdb1 * 2,048 231,071,743 231,069,696 83 Linux
/dev/sdb2 231,073,790 234,440,703 3,366,914 5 Extended
/dev/sdb5 231,073,792 234,440,703 3,366,912 82 Linux swap / Solaris
Drive: sdc __________________________________________________ ___________________
Disk /dev/sdc: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
Drive: sdd __________________________________________________ ___________________
Disk /dev/sdd: 2006 MB, 2006974464 bytes
16 heads, 32 sectors/track, 7656 cylinders, total 3919872 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sdd1 * 8,064 3,919,871 3,911,808 6 FAT16
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 6853-5BA9 vfat LaCie
/dev/sdb1 15AD-B6A6 vfat 120GB HDD
/dev/sdb5 1748cf3d-124c-4aa0-b591-96ea3d102c02 swap
/dev/sdc1 a237f411-43d8-4739-a161-2dac5757d3c3 ext4
/dev/sdc5 f72a56de-fd17-4b90-a09b-d62a1bb1be04 swap
/dev/sdd1 FEE3-850A vfat PENDRIVE
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdd1 /cdrom vfat (rw,relatime,fmask=0022,dmask=0022,codepage=cp437, iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
========================= sdd1/syslinux/syslinux.cfg: ==========================
--------------------------------------------------------------------------------
# D-I config version 2.0
include menu.cfg
default vesamenu.c32
prompt 0
timeout 50
# If you would like to use the new menu and be presented with the option to install or run from USB at startup, remove # from the following line. This line was commented out (by request of many) to allow the old menu to be presented and to enable booting straight into the Live Environment!
# ui gfxboot bootlogo
--------------------------------------------------------------------------------
================= sdd1: Location of files loaded by Syslinux: ==================
GiB - GB File Fragment(s)
?? = ?? ldlinux.sys 1
?? = ?? syslinux/gfxboot.c32 1
?? = ?? syslinux/syslinux.cfg 1
?? = ?? syslinux/vesamenu.c32 1
============== sdd1: Version of COM32(R) files used by Syslinux: ===============
syslinux/gfxboot.c32 : COM32R module (v4.xx)
syslinux/vesamenu.c32 : COM32R module (v4.xx)
=============================== StdErr Messages: ===============================
unlzma: Decoder error
/home/ubuntu/Desktop/boot_info_script.sh: line 1579: [: 2.73495e+09: integer expression expected
I can post any other information that is needed, it was all working fine before this hiccup, had it all recognised.