installing to USB stick vs installing from USB stick

[therealremi]

Hi,
I downloaded the CD ISO image [amd64]. What should I do to install Ubuntu on USB stick so that it can be used just like ordinary installation on ordinary hard drive? I'm a bit confused cause there are special instructions for making the USB stick bootable / copying the live image onto it etc. Booting from the CD and telling the installer that it should install the system on the USB stick is not enough?

[C.S.Cameron]

Following step by step for Full install of 11.04 to USB device, partition sizes given are for 8GB drive, adjust size to suit:

Turn off and unplug the computer. (See note at bottom)
Remove the side from the case.
Unplug the power cable from the hard drive.
Plug the computer back in.
Insert the USB drive.
Insert the Live CD or Live USB.
Start the computer, the CD / flash drive should boot, (you need to adjust BIOS to boot USB).
Select language
Select "Forward".
Select Download updates while installing and Select Install this third-party software.
(Notice that at least 4.4 GB drive space is required, 4GB bootable flash drive users must choose another distro for a full install).
Forward
If prompted unmount partitions.
Select "Something else"
Forward
Confirm "Device for boot loader installation:"is correct, (If you left your internal HDD plugged in make sure the USB drive root is selected - sdb not sdb1).
(Optional Windows data partition)
Select "New Partition Table" click Continue on the drop down.
Click "Free space" and "Add".
Select "Primary".
Make "New partition size..." about 1000
"Location = Beginning".
"Use as: = FAT32 file system"
And "Mount point = windows".
Select "OK"
Click "free space" and then "Add".
Select "Primary", "New partition size ..." = 3 to 4 GB, Beginning, Ext4, and Mount point = "/" then OK.
(Optional home partition)
Click "free space" and then "Add".
Select "Primary", "New partition size ..." = 1 to 2 GB, Beginning, Ext2, and Mount point = "/home" then OK.
(Optional swap partition)
Click "free space" and then "Add".
Select "Primary", "New partition size ..." = remaining space, (1 to 2 GB), Beginning and "Use as" = "swap area" then OK.
(Importent)
Confirm "Device for boot loader installation" points to the USB drive. Default should be ok if HDD was unplugged.
Click "Install Now".
Select your location.
Forward.
Select Keyboard layout.
Forward.
Insert your name, username, password, computer name and select if you want to log in automatically or require a password.
Selecting "Encrypt my home folder" is a good option if you are woried about loosing your USB drive.
Select forward.
Wait until install is complete.
Turn off computer and enable the HDD.
Stick the side panel back on.

Note:
You may omit disabling the hard drive if after partitioning you choose to install grub to the root of the usb drive you are installing Ubuntu to, (ie sdb not sdb1). Be cautious, many people have overwritten the HDD MBR.