JadeMoonlight
May 26th, 2011, 05:38 AM
Hello everyone,
I apologize in advance for the lengthy post. Any help you can offer is greatly appreciated. I am also happy to provide additional information.
To my best knowledge, I am having problems with either my boot list (/boot/grub/grub.cfg) or my Master Boot Record. It is possible that something else in this area is causing the problem, however.
Configuration overview:
Machine: Sony Vaio VGN-NS140E laptop
Systems: Dual-booting Vista and Ubuntu
Partitions: Vista Recovery (NTFS)
Vista OS
Data Files (for sharing between Vista and Ubuntu partitions)
Extended with:
Ubuntu 10.04.2 LTS
Ubuntu 11.04
Swap
Vista is 32-bit
Ubuntu is 64-bit
Below is some information on how I believe I created this problem and an overview of steps I took while trying to fix the problem.
Several days ago, I ran GParted off of an Ubuntu Natty Narwhal (11.04) LiveUSB to remove an older, broken linux partition containing either the Maverick Meerkat (10.10) or the Lucid Lynx (10.04) release. That partition had been my original linux partition for this machine. For reference, the partition originally had Intrepid Ibex (8.10) installed. I was unable to load it properly after downgrading from Maverick Meerkat to Lucid Lynx. Maverick had some glaring functionality issues with my laptop model.
I needed to remove the partition in a Live session because it was located within an extended partition alongside my currently used Ubuntu partition.
After deleting this partition and rebooting the laptop, it was either the Grub Loader menu or a grub-rescue prompt that appeared. I'm pretty sure that it was the grub-rescue prompt at this point. Unable to move forward from this prompt, I turned off the computer and re-inserted my USB drive to boot into a Live session again. Booting into a Live session worked successfully.
At this point I was able to browse the web for possible solutions. I read somewhere that I should run sudo update-grub from the terminal. After doing this and rebooting the computer, I was taken to the Grub Loader menu. Unfortunately, all of the entries I tried to boot from brought me to the grub-rescue prompt. There were 3 error lines above the prompt, but I don't remember all of them at the moment. I know that one of them did say "Error: You need to load the kernel first."
At the time, I was hoping this could be a fairly easy fix. I had the idea to simply create a new Ubuntu partition where the old one had been. I installed Natty Narwhal to a new partition within my extended partition. When I restarted my computer after the install had been completed, I did not have the results I'd expected or hoped for. The grub-rescue prompt still came up when I attempted to boot into any of the entries listed in the Grub Loader. Also, the new install I had created was not available in the list.
I tried to get information from various commands in either the grub or grub-rescue prompt. Somehow, I was able to determine the kernel name I needed and edited the boot command (the screen accessed when you press 'e' on the Grub Loader) to include it. This was no help at the time.
I again restarted the computer and booted into a Live session. I re-installed Natty Narwhal on top of the install I just created, thinking that there may have been a problem with it. After restarting the computer, I was still having the same problems as with the first installation attempt. I ran another Live session.
By looking at other user's Boot Info Script RESULTS.txt files on this forum and following some links, I was able to gain a better understanding of the Grub boot command. With this information and some more experimentation in the grub-rescue prompt, I was able to determine the UUID of my Natty Narwhal partition, edit the boot command mentioned two paragraphs ago, and boot into Ubuntu with only one error.
In this new Ubuntu installation, I ran sudo update-grub in the terminal. The command returned entries that matched with those I saw in GParted, but I still had the same problems and incorrect entries when I restarted the computer.
While it is possible that I could determine all of the necessary start-up boot commands to manually enter each of my bootable partitions, this is really rather inconvenient. I want to know how I can permanently fix the Grub or other necessary files so that my bootloader can take back responsibility for this task. It would also be nice to get back into my Lucid Lynx partition because Natty is a bit buggier than I'm okay with. Fixing my problems with Natty is a topic for another post, however.
I am attaching RESULTS.txt from Boot Info Script. Please let me know if you need any other reports of this nature.
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos6)/boot/grub on this drive.
sda1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /boot/bcd
sda2: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda4: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda7: __________________________________________________ ________________________
File system: ext4
Boot sector type: Grub2 (v1.99)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda7
and looks at sector 461407720 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos7)/boot/grub on this drive.
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 18,782,207 18,780,160 27 Hidden NTFS (Recovery Environment)
/dev/sda2 18,782,208 123,639,807 104,857,600 7 NTFS / exFAT / HPFS
/dev/sda3 166,385,205 292,206,284 125,821,080 7 NTFS / exFAT / HPFS
/dev/sda4 292,206,590 488,392,064 196,185,475 5 Extended
/dev/sda5 482,094,648 488,392,064 6,297,417 82 Linux swap / Solaris
/dev/sda6 * 292,206,592 377,237,503 85,030,912 83 Linux
/dev/sda7 377,239,552 482,093,055 104,853,504 83 Linux
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/sda1 F8EE666BEE6621DC ntfs Recovery
/dev/sda2 C452D9DD52D9D470 ntfs Vista OS
/dev/sda3 80FA0C3BFA0C2FC8 ntfs Data Files
/dev/sda5 1453748c-adaf-4e18-b468-41e847d0705e swap
/dev/sda6 62f3010c-d5c0-4aad-ad78-a23494d36f85 ext4
/dev/sda7 35c96824-9b36-4def-b0cb-34841506a146 ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda3 /mnt/DataFiles fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 /mnt/LucidLynx ext4 (rw,commit=0,commit=0,commit=0,commit=0,commit=0,c ommit=0,commit=0,commit=0,commit=0,commit=0)
/dev/sda7 / ext4 (rw,errors=remount-ro,commit=0)
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-31-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-31-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-31-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
echo 'Loading Linux 2.6.32-31-generic ...'
linux /boot/vmlinuz-2.6.32-31-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-31-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-30-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-30-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
echo 'Loading Linux 2.6.32-30-generic ...'
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-30-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-29-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-29-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
echo 'Loading Linux 2.6.32-29-generic ...'
linux /boot/vmlinuz-2.6.32-29-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-29-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
echo 'Loading Linux 2.6.32-28-generic ...'
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
echo 'Loading Linux 2.6.32-24-generic ...'
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-24-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set f8ee666bee6621dc
chainloader +1
}
menuentry "Windows Recovery Environment (loader) (on /dev/sda2)" {
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs-uuid --set c452d9dd52d9d470
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.35-24-generic (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.35-24-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro quiet splash
initrd /boot/initrd.img-2.6.35-24-generic
}
menuentry "Ubuntu, with Linux 2.6.35-24-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.35-24-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro single
initrd /boot/initrd.img-2.6.35-24-generic
}
menuentry "Ubuntu, with Linux 2.6.35-23-generic (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.35-23-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro quiet splash
initrd /boot/initrd.img-2.6.35-23-generic
}
menuentry "Ubuntu, with Linux 2.6.35-23-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.35-23-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro single
initrd /boot/initrd.img-2.6.35-23-generic
}
menuentry "Ubuntu, with Linux 2.6.35-22-generic (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry "Ubuntu, with Linux 2.6.35-22-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro single
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry "Ubuntu, with Linux 2.6.32-25-generic (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.32-25-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro quiet splash
initrd /boot/initrd.img-2.6.32-25-generic
}
menuentry "Ubuntu, with Linux 2.6.32-25-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.32-25-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro single
initrd /boot/initrd.img-2.6.32-25-generic
}
menuentry "Ubuntu, with Linux 2.6.32-24-generic (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry "Ubuntu, with Linux 2.6.32-24-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro single
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry "Ubuntu, with Linux 2.6.31-21-generic (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.31-21-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro quiet splash
initrd /boot/initrd.img-2.6.31-21-generic
}
menuentry "Ubuntu, with Linux 2.6.31-21-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.31-21-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro single
initrd /boot/initrd.img-2.6.31-21-generic
}
menuentry "Ubuntu, with Linux 2.6.27-11-generic (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.27-11-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
}
menuentry "Ubuntu, with Linux 2.6.27-11-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.27-11-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro single
initrd /boot/initrd.img-2.6.27-11-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda7 during installation
UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=60f1f2c9-1431-41cc-8368-2c6f05e8d0a1 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
143.695178986 = 154.291523584 boot/grub/core.img 1
168.584175110 = 181.015879680 boot/grub/grub.cfg 2
143.603382111 = 154.192957440 boot/grub/stage2 1
143.735404968 = 154.334715904 boot/initrd.img-2.6.32-24-generic 1
144.097145081 = 154.723131392 boot/initrd.img-2.6.32-28-generic 1
144.184417725 = 154.816839680 boot/initrd.img-2.6.32-29-generic 1
168.872993469 = 181.325996032 boot/initrd.img-2.6.32-30-generic 2
140.596412659 = 150.964248576 boot/initrd.img-2.6.32-31-generic 2
143.717079163 = 154.315038720 boot/vmlinuz-2.6.32-24-generic 1
143.722866058 = 154.321252352 boot/vmlinuz-2.6.32-28-generic 1
144.037956238 = 154.659577856 boot/vmlinuz-2.6.32-29-generic 1
144.276241302 = 154.915434496 boot/vmlinuz-2.6.32-30-generic 1
143.877803802 = 154.487615488 boot/vmlinuz-2.6.32-31-generic 1
140.596412659 = 150.964248576 initrd.img 2
168.872993469 = 181.325996032 initrd.img.old 2
143.877803802 = 154.487615488 vmlinuz 1
144.276241302 = 154.915434496 vmlinuz.old 1
=========================== sda7/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos7)'
search --no-floppy --fs-uuid --set=root 35c96824-9b36-4def-b0cb-34841506a146
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos7)'
search --no-floppy --fs-uuid --set=root 35c96824-9b36-4def-b0cb-34841506a146
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos7)'
search --no-floppy --fs-uuid --set=root 35c96824-9b36-4def-b0cb-34841506a146
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=35c96824-9b36-4def-b0cb-34841506a146 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos7)'
search --no-floppy --fs-uuid --set=root 35c96824-9b36-4def-b0cb-34841506a146
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=35c96824-9b36-4def-b0cb-34841506a146 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos7)'
search --no-floppy --fs-uuid --set=root 35c96824-9b36-4def-b0cb-34841506a146
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos7)'
search --no-floppy --fs-uuid --set=root 35c96824-9b36-4def-b0cb-34841506a146
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Recovery Environment (loader) (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root F8EE666BEE6621DC
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Windows Vista (loader) (on /dev/sda2)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos2)'
search --no-floppy --fs-uuid --set=root C452D9DD52D9D470
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.32-31-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-31-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-31-generic
}
menuentry "Ubuntu, with Linux 2.6.32-31-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-31-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
initrd /boot/initrd.img-2.6.32-31-generic
}
menuentry "Ubuntu, with Linux 2.6.32-30-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-30-generic
}
menuentry "Ubuntu, with Linux 2.6.32-30-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
initrd /boot/initrd.img-2.6.32-30-generic
}
menuentry "Ubuntu, with Linux 2.6.32-29-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-29-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-29-generic
}
menuentry "Ubuntu, with Linux 2.6.32-29-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-29-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
initrd /boot/initrd.img-2.6.32-29-generic
}
menuentry "Ubuntu, with Linux 2.6.32-28-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry "Ubuntu, with Linux 2.6.32-28-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry "Ubuntu, with Linux 2.6.32-24-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry "Ubuntu, with Linux 2.6.32-24-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
initrd /boot/initrd.img-2.6.32-24-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda7/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda7 during installation
UUID=35c96824-9b36-4def-b0cb-34841506a146 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=1453748c-adaf-4e18-b468-41e847d0705e none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
220.016372681 = 236.240781312 boot/grub/core.img 1
206.115001678 = 221.314297856 boot/grub/grub.cfg 1
181.136260986 = 194.493579264 boot/initrd.img-2.6.38-8-generic 2
220.014652252 = 236.238934016 boot/vmlinuz-2.6.38-8-generic 1
181.136260986 = 194.493579264 initrd.img 2
220.014652252 = 236.238934016 vmlinuz 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda4
00000000 6b 04 72 6f d8 a6 45 7f c2 10 c4 2a 01 88 68 0a |k.ro..E....*..h.|
00000010 68 a0 8d 5d 64 c3 35 32 26 d4 56 eb 1d 39 9b cd |h..]d.52&.V..9..|
00000020 63 fd 99 ac 98 47 34 98 46 11 a5 81 92 99 2b 0d |c....G4.F.....+.|
00000030 cd 78 16 50 b1 09 15 86 54 e0 70 66 b1 65 67 e5 |.x.P....T.pf.eg.|
00000040 8f fe cc 3d 22 04 4b 1c 23 7c c7 19 23 c6 3e 1b |...=".K.#|..#.>.|
00000050 43 1a c7 46 b8 d6 12 81 8d 0c 5d e9 2f 8f 10 61 |C..F......]./..a|
00000060 a4 36 ba 4e 11 48 8a 46 d3 63 0a 35 86 87 d4 c6 |.6.N.H.F.c.5....|
00000070 d8 db 69 85 19 1d 29 cf 10 ba 9b cf 05 63 a1 ff |..i...)......c..|
00000080 00 23 b8 44 48 91 eb fc 00 8e e1 11 22 47 ab f2 |.#.DH......."G..|
00000090 bb c6 ad 7a 3e 02 00 47 ab 2a b4 ad 7b ea cd 5a |...z>..G.*..{..Z|
000000a0 5f 8b 37 1f 25 2e 55 4b f4 39 db 41 e6 ef c9 e3 |_.7.%.UK.9.A....|
000000b0 e0 52 f5 2b fe f6 39 cb 38 3d d5 d6 66 39 57 9b |.R.+..9.8=..f9W.|
000000c0 7d be 59 71 8d d6 21 a4 66 2b 92 d8 54 7c 89 6c |}.Yq..!.f+..T|.l|
000000d0 69 4b 86 f8 55 d0 3b ea c6 4d 4c 63 1a bb 3a 8d |iK..U.;..MLc..:.|
000000e0 df b2 33 0e 69 65 f6 0e 3e 63 df 58 98 cb 19 25 |..3.ie..>c.X...%|
000000f0 48 89 56 e5 6f 68 2c 17 95 18 71 79 88 c6 58 af |H.V.oh,...qy..X.|
00000100 00 38 ac ab 2d 86 36 48 d2 88 0d 48 cb 16 ec 81 |.8..-.6H...H....|
00000110 a0 eb 02 05 82 62 a8 26 12 3b 58 68 54 60 26 04 |.....b.&.;XhT`&.|
00000120 61 0d 2c 4c be 0e a2 40 a4 27 40 68 d8 43 2a e1 |a.,L...@.'@h.C*.|
00000130 a5 06 aa 12 62 ab 09 65 20 ca 40 35 5e f2 b4 8f |....b..e .@5^...|
00000140 4b 07 d1 20 61 87 f7 8c cf 0e a6 ce 27 8a 47 70 |K.. a.......'.Gp|
00000150 4c 34 9d 0d d1 9e 43 5c 32 40 7e f0 d3 a7 59 0c |L4....C\2@~...Y.|
00000160 11 51 50 8b 57 51 02 22 b9 b4 64 c9 81 6a 64 c3 |.QP.WQ."..d..jd.|
00000170 53 2a 02 9a 29 93 26 c0 de 21 fe 3a 24 44 1a 90 |S*..).&..!.:$D..|
00000180 32 a0 1d 1a 12 68 22 27 29 7e 4a 1d 1c 03 ce b8 |2....h"')~J.....|
00000190 49 a7 04 76 91 10 bc b8 05 30 0d a6 84 22 09 11 |I..v.....0..."..|
000001a0 05 62 26 06 58 50 e4 70 91 08 e0 44 04 26 52 8d |.b&.XP.p...D.&R.|
000001b0 49 b8 21 a5 91 40 44 22 82 80 f2 3c 88 92 00 fe |I.!..@D"...<....|
000001c0 ff ff 82 fe ff ff 3a 76 51 0b 49 17 60 00 00 fe |......:vQ.I.`...|
000001d0 ff ff 05 fe ff ff 01 00 00 00 01 78 11 05 00 00 |...........x....|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
unlzma: Decoder error
unlzma: Decoder error
I apologize in advance for the lengthy post. Any help you can offer is greatly appreciated. I am also happy to provide additional information.
To my best knowledge, I am having problems with either my boot list (/boot/grub/grub.cfg) or my Master Boot Record. It is possible that something else in this area is causing the problem, however.
Configuration overview:
Machine: Sony Vaio VGN-NS140E laptop
Systems: Dual-booting Vista and Ubuntu
Partitions: Vista Recovery (NTFS)
Vista OS
Data Files (for sharing between Vista and Ubuntu partitions)
Extended with:
Ubuntu 10.04.2 LTS
Ubuntu 11.04
Swap
Vista is 32-bit
Ubuntu is 64-bit
Below is some information on how I believe I created this problem and an overview of steps I took while trying to fix the problem.
Several days ago, I ran GParted off of an Ubuntu Natty Narwhal (11.04) LiveUSB to remove an older, broken linux partition containing either the Maverick Meerkat (10.10) or the Lucid Lynx (10.04) release. That partition had been my original linux partition for this machine. For reference, the partition originally had Intrepid Ibex (8.10) installed. I was unable to load it properly after downgrading from Maverick Meerkat to Lucid Lynx. Maverick had some glaring functionality issues with my laptop model.
I needed to remove the partition in a Live session because it was located within an extended partition alongside my currently used Ubuntu partition.
After deleting this partition and rebooting the laptop, it was either the Grub Loader menu or a grub-rescue prompt that appeared. I'm pretty sure that it was the grub-rescue prompt at this point. Unable to move forward from this prompt, I turned off the computer and re-inserted my USB drive to boot into a Live session again. Booting into a Live session worked successfully.
At this point I was able to browse the web for possible solutions. I read somewhere that I should run sudo update-grub from the terminal. After doing this and rebooting the computer, I was taken to the Grub Loader menu. Unfortunately, all of the entries I tried to boot from brought me to the grub-rescue prompt. There were 3 error lines above the prompt, but I don't remember all of them at the moment. I know that one of them did say "Error: You need to load the kernel first."
At the time, I was hoping this could be a fairly easy fix. I had the idea to simply create a new Ubuntu partition where the old one had been. I installed Natty Narwhal to a new partition within my extended partition. When I restarted my computer after the install had been completed, I did not have the results I'd expected or hoped for. The grub-rescue prompt still came up when I attempted to boot into any of the entries listed in the Grub Loader. Also, the new install I had created was not available in the list.
I tried to get information from various commands in either the grub or grub-rescue prompt. Somehow, I was able to determine the kernel name I needed and edited the boot command (the screen accessed when you press 'e' on the Grub Loader) to include it. This was no help at the time.
I again restarted the computer and booted into a Live session. I re-installed Natty Narwhal on top of the install I just created, thinking that there may have been a problem with it. After restarting the computer, I was still having the same problems as with the first installation attempt. I ran another Live session.
By looking at other user's Boot Info Script RESULTS.txt files on this forum and following some links, I was able to gain a better understanding of the Grub boot command. With this information and some more experimentation in the grub-rescue prompt, I was able to determine the UUID of my Natty Narwhal partition, edit the boot command mentioned two paragraphs ago, and boot into Ubuntu with only one error.
In this new Ubuntu installation, I ran sudo update-grub in the terminal. The command returned entries that matched with those I saw in GParted, but I still had the same problems and incorrect entries when I restarted the computer.
While it is possible that I could determine all of the necessary start-up boot commands to manually enter each of my bootable partitions, this is really rather inconvenient. I want to know how I can permanently fix the Grub or other necessary files so that my bootloader can take back responsibility for this task. It would also be nice to get back into my Lucid Lynx partition because Natty is a bit buggier than I'm okay with. Fixing my problems with Natty is a topic for another post, however.
I am attaching RESULTS.txt from Boot Info Script. Please let me know if you need any other reports of this nature.
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of
the same hard drive for core.img. core.img is at this location and looks
for (,msdos6)/boot/grub on this drive.
sda1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files: /bootmgr /boot/bcd
sda2: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files:
sda4: __________________________________________________ ________________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ ________________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________ ________________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda7: __________________________________________________ ________________________
File system: ext4
Boot sector type: Grub2 (v1.99)
Boot sector info: Grub2 (v1.99) is installed in the boot sector of sda7
and looks at sector 461407720 of the same hard drive
for core.img. core.img is at this location and looks
for (,msdos7)/boot/grub on this drive.
Operating System: Ubuntu 11.04
Boot files: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 2,048 18,782,207 18,780,160 27 Hidden NTFS (Recovery Environment)
/dev/sda2 18,782,208 123,639,807 104,857,600 7 NTFS / exFAT / HPFS
/dev/sda3 166,385,205 292,206,284 125,821,080 7 NTFS / exFAT / HPFS
/dev/sda4 292,206,590 488,392,064 196,185,475 5 Extended
/dev/sda5 482,094,648 488,392,064 6,297,417 82 Linux swap / Solaris
/dev/sda6 * 292,206,592 377,237,503 85,030,912 83 Linux
/dev/sda7 377,239,552 482,093,055 104,853,504 83 Linux
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/sda1 F8EE666BEE6621DC ntfs Recovery
/dev/sda2 C452D9DD52D9D470 ntfs Vista OS
/dev/sda3 80FA0C3BFA0C2FC8 ntfs Data Files
/dev/sda5 1453748c-adaf-4e18-b468-41e847d0705e swap
/dev/sda6 62f3010c-d5c0-4aad-ad78-a23494d36f85 ext4
/dev/sda7 35c96824-9b36-4def-b0cb-34841506a146 ext4
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/sda3 /mnt/DataFiles fuseblk (rw,nosuid,nodev,allow_other,blksize=4096)
/dev/sda6 /mnt/LucidLynx ext4 (rw,commit=0,commit=0,commit=0,commit=0,commit=0,c ommit=0,commit=0,commit=0,commit=0,commit=0)
/dev/sda7 / ext4 (rw,errors=remount-ro,commit=0)
=========================== sda6/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-31-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-31-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-31-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-31-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
echo 'Loading Linux 2.6.32-31-generic ...'
linux /boot/vmlinuz-2.6.32-31-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-31-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-30-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-30-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-30-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
echo 'Loading Linux 2.6.32-30-generic ...'
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-30-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-29-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-29-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-29-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-29-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
echo 'Loading Linux 2.6.32-29-generic ...'
linux /boot/vmlinuz-2.6.32-29-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-29-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-28-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-28-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
echo 'Loading Linux 2.6.32-28-generic ...'
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
echo 'Loading Linux 2.6.32-24-generic ...'
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-24-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,7)'
search --no-floppy --fs-uuid --set 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set f8ee666bee6621dc
chainloader +1
}
menuentry "Windows Recovery Environment (loader) (on /dev/sda2)" {
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs-uuid --set c452d9dd52d9d470
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.35-24-generic (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.35-24-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro quiet splash
initrd /boot/initrd.img-2.6.35-24-generic
}
menuentry "Ubuntu, with Linux 2.6.35-24-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.35-24-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro single
initrd /boot/initrd.img-2.6.35-24-generic
}
menuentry "Ubuntu, with Linux 2.6.35-23-generic (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.35-23-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro quiet splash
initrd /boot/initrd.img-2.6.35-23-generic
}
menuentry "Ubuntu, with Linux 2.6.35-23-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.35-23-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro single
initrd /boot/initrd.img-2.6.35-23-generic
}
menuentry "Ubuntu, with Linux 2.6.35-22-generic (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry "Ubuntu, with Linux 2.6.35-22-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro single
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry "Ubuntu, with Linux 2.6.32-25-generic (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.32-25-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro quiet splash
initrd /boot/initrd.img-2.6.32-25-generic
}
menuentry "Ubuntu, with Linux 2.6.32-25-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.32-25-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro single
initrd /boot/initrd.img-2.6.32-25-generic
}
menuentry "Ubuntu, with Linux 2.6.32-24-generic (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry "Ubuntu, with Linux 2.6.32-24-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro single
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry "Ubuntu, with Linux 2.6.31-21-generic (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.31-21-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro quiet splash
initrd /boot/initrd.img-2.6.31-21-generic
}
menuentry "Ubuntu, with Linux 2.6.31-21-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.31-21-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro single
initrd /boot/initrd.img-2.6.31-21-generic
}
menuentry "Ubuntu, with Linux 2.6.27-11-generic (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.27-11-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
}
menuentry "Ubuntu, with Linux 2.6.27-11-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 7d90875a-a89f-4c4f-9226-cbdc3cd2a84c
linux /boot/vmlinuz-2.6.27-11-generic root=UUID=7d90875a-a89f-4c4f-9226-cbdc3cd2a84c ro single
initrd /boot/initrd.img-2.6.27-11-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
=============================== sda6/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda7 during installation
UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=60f1f2c9-1431-41cc-8368-2c6f05e8d0a1 none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda6: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
143.695178986 = 154.291523584 boot/grub/core.img 1
168.584175110 = 181.015879680 boot/grub/grub.cfg 2
143.603382111 = 154.192957440 boot/grub/stage2 1
143.735404968 = 154.334715904 boot/initrd.img-2.6.32-24-generic 1
144.097145081 = 154.723131392 boot/initrd.img-2.6.32-28-generic 1
144.184417725 = 154.816839680 boot/initrd.img-2.6.32-29-generic 1
168.872993469 = 181.325996032 boot/initrd.img-2.6.32-30-generic 2
140.596412659 = 150.964248576 boot/initrd.img-2.6.32-31-generic 2
143.717079163 = 154.315038720 boot/vmlinuz-2.6.32-24-generic 1
143.722866058 = 154.321252352 boot/vmlinuz-2.6.32-28-generic 1
144.037956238 = 154.659577856 boot/vmlinuz-2.6.32-29-generic 1
144.276241302 = 154.915434496 boot/vmlinuz-2.6.32-30-generic 1
143.877803802 = 154.487615488 boot/vmlinuz-2.6.32-31-generic 1
140.596412659 = 150.964248576 initrd.img 2
168.872993469 = 181.325996032 initrd.img.old 2
143.877803802 = 154.487615488 vmlinuz 1
144.276241302 = 154.915434496 vmlinuz.old 1
=========================== sda7/boot/grub/grub.cfg: ===========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
}
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos7)'
search --no-floppy --fs-uuid --set=root 35c96824-9b36-4def-b0cb-34841506a146
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=auto
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos7)'
search --no-floppy --fs-uuid --set=root 35c96824-9b36-4def-b0cb-34841506a146
set locale_dir=($root)/boot/grub/locale
set lang=en_US
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
if background_color 44,0,30; then
clear
fi
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
if [ ${recordfail} != 1 ]; then
if [ -e ${prefix}/gfxblacklist.txt ]; then
if hwmatch ${prefix}/gfxblacklist.txt 3; then
if [ ${match} = 0 ]; then
set linux_gfx_mode=keep
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=text
fi
else
set linux_gfx_mode=keep
fi
else
set linux_gfx_mode=text
fi
export linux_gfx_mode
if [ "$linux_gfx_mode" != "text" ]; then load_video; fi
menuentry 'Ubuntu, with Linux 2.6.38-8-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos7)'
search --no-floppy --fs-uuid --set=root 35c96824-9b36-4def-b0cb-34841506a146
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=35c96824-9b36-4def-b0cb-34841506a146 ro quiet splash vt.handoff=7
initrd /boot/initrd.img-2.6.38-8-generic
}
menuentry 'Ubuntu, with Linux 2.6.38-8-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
set gfxpayload=$linux_gfx_mode
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos7)'
search --no-floppy --fs-uuid --set=root 35c96824-9b36-4def-b0cb-34841506a146
echo 'Loading Linux 2.6.38-8-generic ...'
linux /boot/vmlinuz-2.6.38-8-generic root=UUID=35c96824-9b36-4def-b0cb-34841506a146 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.38-8-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos7)'
search --no-floppy --fs-uuid --set=root 35c96824-9b36-4def-b0cb-34841506a146
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos7)'
search --no-floppy --fs-uuid --set=root 35c96824-9b36-4def-b0cb-34841506a146
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Recovery Environment (loader) (on /dev/sda1)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos1)'
search --no-floppy --fs-uuid --set=root F8EE666BEE6621DC
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Windows Vista (loader) (on /dev/sda2)" --class windows --class os {
insmod part_msdos
insmod ntfs
set root='(/dev/sda,msdos2)'
search --no-floppy --fs-uuid --set=root C452D9DD52D9D470
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.32-31-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-31-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-31-generic
}
menuentry "Ubuntu, with Linux 2.6.32-31-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-31-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
initrd /boot/initrd.img-2.6.32-31-generic
}
menuentry "Ubuntu, with Linux 2.6.32-30-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-30-generic
}
menuentry "Ubuntu, with Linux 2.6.32-30-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-30-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
initrd /boot/initrd.img-2.6.32-30-generic
}
menuentry "Ubuntu, with Linux 2.6.32-29-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-29-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-29-generic
}
menuentry "Ubuntu, with Linux 2.6.32-29-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-29-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
initrd /boot/initrd.img-2.6.32-29-generic
}
menuentry "Ubuntu, with Linux 2.6.32-28-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry "Ubuntu, with Linux 2.6.32-28-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-28-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
initrd /boot/initrd.img-2.6.32-28-generic
}
menuentry "Ubuntu, with Linux 2.6.32-24-generic (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry "Ubuntu, with Linux 2.6.32-24-generic (recovery mode) (on /dev/sda6)" --class gnu-linux --class gnu --class os {
insmod part_msdos
insmod ext2
set root='(/dev/sda,msdos6)'
search --no-floppy --fs-uuid --set=root 62f3010c-d5c0-4aad-ad78-a23494d36f85
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=62f3010c-d5c0-4aad-ad78-a23494d36f85 ro single
initrd /boot/initrd.img-2.6.32-24-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
--------------------------------------------------------------------------------
=============================== sda7/etc/fstab: ================================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda7 during installation
UUID=35c96824-9b36-4def-b0cb-34841506a146 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=1453748c-adaf-4e18-b468-41e847d0705e none swap sw 0 0
--------------------------------------------------------------------------------
=================== sda7: Location of files loaded by Grub: ====================
GiB - GB File Fragment(s)
220.016372681 = 236.240781312 boot/grub/core.img 1
206.115001678 = 221.314297856 boot/grub/grub.cfg 1
181.136260986 = 194.493579264 boot/initrd.img-2.6.38-8-generic 2
220.014652252 = 236.238934016 boot/vmlinuz-2.6.38-8-generic 1
181.136260986 = 194.493579264 initrd.img 2
220.014652252 = 236.238934016 vmlinuz 1
======================== Unknown MBRs/Boot Sectors/etc: ========================
Unknown BootLoader on sda4
00000000 6b 04 72 6f d8 a6 45 7f c2 10 c4 2a 01 88 68 0a |k.ro..E....*..h.|
00000010 68 a0 8d 5d 64 c3 35 32 26 d4 56 eb 1d 39 9b cd |h..]d.52&.V..9..|
00000020 63 fd 99 ac 98 47 34 98 46 11 a5 81 92 99 2b 0d |c....G4.F.....+.|
00000030 cd 78 16 50 b1 09 15 86 54 e0 70 66 b1 65 67 e5 |.x.P....T.pf.eg.|
00000040 8f fe cc 3d 22 04 4b 1c 23 7c c7 19 23 c6 3e 1b |...=".K.#|..#.>.|
00000050 43 1a c7 46 b8 d6 12 81 8d 0c 5d e9 2f 8f 10 61 |C..F......]./..a|
00000060 a4 36 ba 4e 11 48 8a 46 d3 63 0a 35 86 87 d4 c6 |.6.N.H.F.c.5....|
00000070 d8 db 69 85 19 1d 29 cf 10 ba 9b cf 05 63 a1 ff |..i...)......c..|
00000080 00 23 b8 44 48 91 eb fc 00 8e e1 11 22 47 ab f2 |.#.DH......."G..|
00000090 bb c6 ad 7a 3e 02 00 47 ab 2a b4 ad 7b ea cd 5a |...z>..G.*..{..Z|
000000a0 5f 8b 37 1f 25 2e 55 4b f4 39 db 41 e6 ef c9 e3 |_.7.%.UK.9.A....|
000000b0 e0 52 f5 2b fe f6 39 cb 38 3d d5 d6 66 39 57 9b |.R.+..9.8=..f9W.|
000000c0 7d be 59 71 8d d6 21 a4 66 2b 92 d8 54 7c 89 6c |}.Yq..!.f+..T|.l|
000000d0 69 4b 86 f8 55 d0 3b ea c6 4d 4c 63 1a bb 3a 8d |iK..U.;..MLc..:.|
000000e0 df b2 33 0e 69 65 f6 0e 3e 63 df 58 98 cb 19 25 |..3.ie..>c.X...%|
000000f0 48 89 56 e5 6f 68 2c 17 95 18 71 79 88 c6 58 af |H.V.oh,...qy..X.|
00000100 00 38 ac ab 2d 86 36 48 d2 88 0d 48 cb 16 ec 81 |.8..-.6H...H....|
00000110 a0 eb 02 05 82 62 a8 26 12 3b 58 68 54 60 26 04 |.....b.&.;XhT`&.|
00000120 61 0d 2c 4c be 0e a2 40 a4 27 40 68 d8 43 2a e1 |a.,L...@.'@h.C*.|
00000130 a5 06 aa 12 62 ab 09 65 20 ca 40 35 5e f2 b4 8f |....b..e .@5^...|
00000140 4b 07 d1 20 61 87 f7 8c cf 0e a6 ce 27 8a 47 70 |K.. a.......'.Gp|
00000150 4c 34 9d 0d d1 9e 43 5c 32 40 7e f0 d3 a7 59 0c |L4....C\2@~...Y.|
00000160 11 51 50 8b 57 51 02 22 b9 b4 64 c9 81 6a 64 c3 |.QP.WQ."..d..jd.|
00000170 53 2a 02 9a 29 93 26 c0 de 21 fe 3a 24 44 1a 90 |S*..).&..!.:$D..|
00000180 32 a0 1d 1a 12 68 22 27 29 7e 4a 1d 1c 03 ce b8 |2....h"')~J.....|
00000190 49 a7 04 76 91 10 bc b8 05 30 0d a6 84 22 09 11 |I..v.....0..."..|
000001a0 05 62 26 06 58 50 e4 70 91 08 e0 44 04 26 52 8d |.b&.XP.p...D.&R.|
000001b0 49 b8 21 a5 91 40 44 22 82 80 f2 3c 88 92 00 fe |I.!..@D"...<....|
000001c0 ff ff 82 fe ff ff 3a 76 51 0b 49 17 60 00 00 fe |......:vQ.I.`...|
000001d0 ff ff 05 fe ff ff 01 00 00 00 01 78 11 05 00 00 |...........x....|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
unlzma: Decoder error
unlzma: Decoder error