Jrhw
May 25th, 2011, 08:29 PM
I've just finished installing a new hard drive, copied all the files over, and rebooted into both windows, and ubuntu with not problem. There is one annoying error message that appears right after the grub menu.about a unknown device which has me perplexed. I assume that error is in regard ot my old hard drive id. Is there a easy way to find my new hard drive id, and change the grub menu to reflect that id to make that error message go away? My info script follows:
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Windows is installed in the MBR of /dev/sda.
sda1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files: /boot.ini /bootmgr /Boot/BCD /NTLDR /NTDETECT.COM
/wubildr /ubuntu/winboot/wubildr /wubildr.mbr
/ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk
/ubuntu/disks/swap.disk
sda1/Wubi: __________________________________________________ ___________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 488,392,064 488,392,002 7 NTFS / exFAT / HPFS
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 458243db-b536-475b-a9c7-19c173782270 ext4
/dev/sda1 80389F0B389EFEFA ntfs
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 / ext4 (rw,errors=remount-ro)
/dev/sda1 /host fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,all ow_other,blksize=4096)
================================ sda1/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
C:\wubildr.mbr = "Ubuntu"
--------------------------------------------------------------------------------
======================== sda1/Wubi/boot/grub/grub.cfg: =========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.32-31-generic" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 3860815760811cae
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-31-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.32-31-generic
}
menuentry "Ubuntu, Linux 2.6.32-31-generic (recovery mode)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 3860815760811cae
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-31-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.32-31-generic
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 3860815760811cae
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
============================= sda1/Wubi/etc/fstab: =============================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
--------------------------------------------------------------------------------
================= sda1/Wubi: Location of files loaded by Grub: =================
GiB - GB File Fragment(s)
6.199699402 = 6.656876544 boot/grub/grub.cfg 1
6.351455688 = 6.819823616 boot/initrd.img-2.6.32-31-generic 1
6.164859772 = 6.619467776 boot/vmlinuz-2.6.32-31-generic 1
6.351455688 = 6.819823616 initrd.img 1
6.164859772 = 6.619467776 vmlinuz 1
Boot Info Script 0.60 from 17 May 2011
============================= Boot Info Summary: ===============================
=> Windows is installed in the MBR of /dev/sda.
sda1: __________________________________________________ ________________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files: /boot.ini /bootmgr /Boot/BCD /NTLDR /NTDETECT.COM
/wubildr /ubuntu/winboot/wubildr /wubildr.mbr
/ubuntu/winboot/wubildr.mbr /ubuntu/disks/root.disk
/ubuntu/disks/swap.disk
sda1/Wubi: __________________________________________________ ___________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.2 LTS
Boot files: /boot/grub/grub.cfg /etc/fstab
============================ Drive/Partition Info: =============================
Drive: sda __________________________________________________ ___________________
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start Sector End Sector # of Sectors Id System
/dev/sda1 * 63 488,392,064 488,392,002 7 NTFS / exFAT / HPFS
"blkid" output: __________________________________________________ ______________
Device UUID TYPE LABEL
/dev/loop0 458243db-b536-475b-a9c7-19c173782270 ext4
/dev/sda1 80389F0B389EFEFA ntfs
================================ Mount points: =================================
Device Mount_Point Type Options
/dev/loop0 / ext4 (rw,errors=remount-ro)
/dev/sda1 /host fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,all ow_other,blksize=4096)
================================ sda1/boot.ini: ================================
--------------------------------------------------------------------------------
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
C:\wubildr.mbr = "Ubuntu"
--------------------------------------------------------------------------------
======================== sda1/Wubi/boot/grub/grub.cfg: =========================
--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.32-31-generic" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 3860815760811cae
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-31-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.32-31-generic
}
menuentry "Ubuntu, Linux 2.6.32-31-generic (recovery mode)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 3860815760811cae
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-31-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.32-31-generic
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 3860815760811cae
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------
============================= sda1/Wubi/etc/fstab: =============================
--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
--------------------------------------------------------------------------------
================= sda1/Wubi: Location of files loaded by Grub: =================
GiB - GB File Fragment(s)
6.199699402 = 6.656876544 boot/grub/grub.cfg 1
6.351455688 = 6.819823616 boot/initrd.img-2.6.32-31-generic 1
6.164859772 = 6.619467776 boot/vmlinuz-2.6.32-31-generic 1
6.351455688 = 6.819823616 initrd.img 1
6.164859772 = 6.619467776 vmlinuz 1