PDA

View Full Version : [ubuntu] Ubuntu Classic + Xinerama



icedown
May 20th, 2011, 04:16 AM
I have nVidia gtx 280 x2 and 3 monitors on my system. I'm trying to get Ubuntu classic desktop to load. I can get into Ubuntu Classic (no effects) with out any problems and can get into both of the others as long as i disable Xinerama. I know that compiz won't play with Xinerama but will Classic?

When I attempt to use classic, what would normally be on the left screen shows up on the right screen and the center and left screens remain black. I can still move the mouse across all the screens but nothing else works.

Here is my xorg.conf


# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 270.41.06 (buildmeister@swio-display-x86-rhel47-08.nvidia.com) Mon Apr 18 15:14:00 PDT 2011
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
#Section "InputDevice"
# # generated from default
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/psaux"
# Option "Emulate3Buttons" "no"
# Option "ZAxisMapping" "4 5"
#EndSection
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
#Section "InputDevice"
# # generated from default
# Identifier "Keyboard0"
# Driver "kbd"
#EndSection

Section "ServerLayout"

# Keyboard settings are now read from /etc/default/console-setup
# InputDevice "Keyboard0" "CoreKeyboard"
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
# InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
Identifier "Layout0"
Screen 0 "Screen0" 1680 0
Screen 1 "Screen1" LeftOf "Screen0"
Screen 2 "Screen2" RightOf "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
# commented out by update-manager, HAL is now used and auto-detects devices
EndSection

Section "Module"
Load "glx"
EndSection

Section "InputDevice"

# generated from default
Identifier "Keyboard0"
Driver "keyboard"
EndSection

Section "InputDevice"

# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Acer X223W"
HorizSync 31.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "Acer X223W"
HorizSync 31.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection

Section "Monitor"
Identifier "Monitor2"
VendorName "Unknown"
ModelName "Acer X223W"
HorizSync 31.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
# HorizSync source: edid, VertRefresh source: edid
EndSection

Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 280"
BusID "PCI:4:0:0"
EndSection

Section "Device"
Identifier "Device1"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 280"
BusID "PCI:2:0:0"
Screen 0
EndSection

Section "Device"
Identifier "Device2"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTX 280"
BusID "PCI:2:0:0"
Screen 1
EndSection

Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "NoLogo" "True"
Option "TwinView" "0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "NoLogo" "True"
Option "TwinView" "0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection

Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "NoLogo" "True"
Option "TwinView" "0"
Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection


And here is the Xorg log from starting classic with Xinerama enabled.


[ 6799.086]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 6799.086] X Protocol Version 11, Revision 0
[ 6799.086] Build Operating System: Linux 2.6.24-29-server x86_64 Ubuntu
[ 6799.086] Current Operating System: Linux enterprise 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 x86_64
[ 6799.086] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-8-generic root=UUID=63d6bb78-3c43-487b-ace9-4b186747ba58 ro quiet splash vt.handoff=7
[ 6799.086] Build Date: 19 April 2011 03:40:45PM
[ 6799.086] xorg-server 2:1.10.1-1ubuntu1 (For technical support please see http://www.ubuntu.com/support)
[ 6799.086] Current version of pixman: 0.20.2
[ 6799.086] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6799.086] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6799.086] (==) Log file: "/var/log/Xorg.1.log", Time: Thu May 19 22:07:29 2011
[ 6799.086] (==) Using config file: "/etc/X11/xorg.conf"
[ 6799.086] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6799.086] (==) ServerLayout "Layout0"
[ 6799.086] (**) |-->Screen "Screen0" (0)
[ 6799.086] (**) | |-->Monitor "Monitor0"
[ 6799.087] (**) | |-->Device "Device0"
[ 6799.087] (**) |-->Screen "Screen1" (1)
[ 6799.087] (**) | |-->Monitor "Monitor1"
[ 6799.087] (**) | |-->Device "Device1"
[ 6799.087] (**) |-->Screen "Screen2" (2)
[ 6799.087] (**) | |-->Monitor "Monitor2"
[ 6799.087] (**) | |-->Device "Device2"
[ 6799.087] (**) |-->Input Device "Keyboard0"
[ 6799.087] (**) |-->Input Device "Mouse0"
[ 6799.087] (**) Option "Xinerama" "1"
[ 6799.087] (==) Automatically adding devices
[ 6799.087] (==) Automatically enabling devices
[ 6799.087] (**) Xinerama: enabled
[ 6799.087] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 6799.087] Entry deleted from font path.
[ 6799.087] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 6799.087] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 6799.087] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 6799.087] (WW) Disabling Keyboard0
[ 6799.087] (WW) Disabling Mouse0
[ 6799.087] (II) Loader magic: 0x7e0280
[ 6799.087] (II) Module ABI versions:
[ 6799.087] X.Org ANSI C Emulation: 0.4
[ 6799.087] X.Org Video Driver: 10.0
[ 6799.087] X.Org XInput driver : 12.3
[ 6799.087] X.Org Server Extension : 5.0
[ 6799.090] (--) PCI: (0:2:0:0) 10de:05e1:3842:1280 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000bf00/128, BIOS @ 0x????????/524288
[ 6799.090] (--) PCI:*(0:4:0:0) 10de:05e1:3842:1280 rev 161, Mem @ 0xf6000000/16777216, 0xc0000000/268435456, 0xf4000000/33554432, I/O @ 0x00006f00/128, BIOS @ 0x????????/524288
[ 6799.090] (II) Open ACPI successful (/var/run/acpid.socket)
[ 6799.091] (II) "extmod" will be loaded by default.
[ 6799.091] (II) "dbe" will be loaded by default.
[ 6799.091] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 6799.091] (II) "record" will be loaded by default.
[ 6799.091] (II) "dri" will be loaded by default.
[ 6799.091] (II) "dri2" will be loaded by default.
[ 6799.091] (II) LoadModule: "glx"
[ 6799.091] (II) Loading /usr/lib/xorg/extra-modules/libglx.so
[ 6799.105] (II) Module glx: vendor="NVIDIA Corporation"
[ 6799.105] compiled for 4.0.2, module version = 1.0.0
[ 6799.105] Module class: X.Org Server Extension
[ 6799.105] (II) NVIDIA GLX Module 270.41.06 Mon Apr 18 15:10:15 PDT 2011
[ 6799.105] (II) Loading extension GLX
[ 6799.105] (II) LoadModule: "extmod"
[ 6799.105] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 6799.105] (II) Module extmod: vendor="X.Org Foundation"
[ 6799.105] compiled for 1.10.1, module version = 1.0.0
[ 6799.105] Module class: X.Org Server Extension
[ 6799.105] ABI class: X.Org Server Extension, version 5.0
[ 6799.105] (II) Loading extension MIT-SCREEN-SAVER
[ 6799.105] (II) Loading extension XFree86-VidModeExtension
[ 6799.105] (II) Loading extension XFree86-DGA
[ 6799.105] (II) Loading extension DPMS
[ 6799.105] (II) Loading extension XVideo
[ 6799.105] (II) Loading extension XVideo-MotionCompensation
[ 6799.105] (II) Loading extension X-Resource
[ 6799.105] (II) LoadModule: "dbe"
[ 6799.105] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 6799.105] (II) Module dbe: vendor="X.Org Foundation"
[ 6799.105] compiled for 1.10.1, module version = 1.0.0
[ 6799.105] Module class: X.Org Server Extension
[ 6799.105] ABI class: X.Org Server Extension, version 5.0
[ 6799.105] (II) Loading extension DOUBLE-BUFFER
[ 6799.105] (II) LoadModule: "record"
[ 6799.105] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 6799.105] (II) Module record: vendor="X.Org Foundation"
[ 6799.105] compiled for 1.10.1, module version = 1.13.0
[ 6799.106] Module class: X.Org Server Extension
[ 6799.106] ABI class: X.Org Server Extension, version 5.0
[ 6799.106] (II) Loading extension RECORD
[ 6799.106] (II) LoadModule: "dri"
[ 6799.106] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 6799.106] (II) Module dri: vendor="X.Org Foundation"
[ 6799.106] compiled for 1.10.1, module version = 1.0.0
[ 6799.106] ABI class: X.Org Server Extension, version 5.0
[ 6799.106] (II) Loading extension XFree86-DRI
[ 6799.106] (II) LoadModule: "dri2"
[ 6799.106] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 6799.106] (II) Module dri2: vendor="X.Org Foundation"
[ 6799.106] compiled for 1.10.1, module version = 1.2.0
[ 6799.106] ABI class: X.Org Server Extension, version 5.0
[ 6799.106] (II) Loading extension DRI2
[ 6799.106] (II) LoadModule: "nvidia"
[ 6799.106] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
[ 6799.106] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 6799.106] compiled for 4.0.2, module version = 1.0.0
[ 6799.106] Module class: X.Org Video Driver
[ 6799.107] (II) NVIDIA dlloader X Driver 270.41.06 Mon Apr 18 14:55:25 PDT 2011
[ 6799.107] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 6799.107] (--) using VT number 8

[ 6799.150] (II) Loading sub module "fb"
[ 6799.150] (II) LoadModule: "fb"
[ 6799.150] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6799.150] (II) Module fb: vendor="X.Org Foundation"
[ 6799.150] compiled for 1.10.1, module version = 1.0.0
[ 6799.150] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6799.150] (II) Loading sub module "wfb"
[ 6799.150] (II) LoadModule: "wfb"
[ 6799.151] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6799.151] (II) Module wfb: vendor="X.Org Foundation"
[ 6799.151] compiled for 1.10.1, module version = 1.0.0
[ 6799.151] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6799.151] (II) Loading sub module "ramdac"
[ 6799.151] (II) LoadModule: "ramdac"
[ 6799.151] (II) Module "ramdac" already built-in
[ 6799.151] (WW) NVIDIA: The Composite and Xinerama extensions are both enabled, which
[ 6799.151] (WW) NVIDIA: is an unsupported configuration. The driver will continue
[ 6799.151] (WW) NVIDIA: to load, but may behave strangely.
[ 6799.151] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
[ 6799.151] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6799.151] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6799.151] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
[ 6799.151] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6799.151] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6799.151] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
[ 6799.151] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 6799.151] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6799.151] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 6799.151] (==) NVIDIA(0): RGB weight 888
[ 6799.151] (==) NVIDIA(0): Default visual is TrueColor
[ 6799.151] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 6799.151] (**) NVIDIA(0): Option "NoLogo" "True"
[ 6799.151] (**) NVIDIA(0): Option "TwinView" "0"
[ 6799.151] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select +0+0"
[ 6799.274] (II) NVIDIA(GPU-0): Display (Acer X223W (DFP-0)) does not support NVIDIA 3D Vision
[ 6799.274] (II) NVIDIA(GPU-0): stereo.
[ 6799.274] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 280 (GT200) at PCI:4:0:0 (GPU-0)
[ 6799.275] (--) NVIDIA(0): Memory: 1048576 kBytes
[ 6799.275] (--) NVIDIA(0): VideoBIOS: 62.00.1c.00.80
[ 6799.275] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 6799.275] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 6799.275] (--) NVIDIA(0): Connected display device(s) on GeForce GTX 280 at PCI:4:0:0
[ 6799.275] (--) NVIDIA(0): Acer X223W (DFP-0)
[ 6799.275] (--) NVIDIA(0): Acer X223W (DFP-0): 330.0 MHz maximum pixel clock
[ 6799.275] (--) NVIDIA(0): Acer X223W (DFP-0): Internal Dual Link TMDS
[ 6799.369] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 6799.369] (II) NVIDIA(0): Validated modes:
[ 6799.369] (II) NVIDIA(0): "nvidia-auto-select+0+0"
[ 6799.369] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 6799.402] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
[ 6799.402] (--) NVIDIA(0): option
[ 6799.402] (WW) NVIDIA(0): 32-bit ARGB GLX visuals are not currently supported with the
[ 6799.402] (WW) NVIDIA(0): Xinerama extension.
[ 6799.402] (WW) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
[ 6799.402] (**) NVIDIA(1): Depth 24, (--) framebuffer bpp 32
[ 6799.402] (==) NVIDIA(1): RGB weight 888
[ 6799.402] (==) NVIDIA(1): Default visual is TrueColor
[ 6799.402] (==) NVIDIA(1): Using gamma correction (1.0, 1.0, 1.0)
[ 6799.402] (**) NVIDIA(1): Option "NoLogo" "True"
[ 6799.402] (**) NVIDIA(1): Option "TwinView" "0"
[ 6799.402] (**) NVIDIA(1): Option "MetaModes" "DFP-0: nvidia-auto-select +0+0"
[ 6799.557] (II) NVIDIA(GPU-1): Display (Acer X223W (DFP-0)) does not support NVIDIA 3D Vision
[ 6799.557] (II) NVIDIA(GPU-1): stereo.
[ 6799.622] (II) NVIDIA(GPU-1): Display (Acer X223W (DFP-1)) does not support NVIDIA 3D Vision
[ 6799.622] (II) NVIDIA(GPU-1): stereo.
[ 6799.623] (II) NVIDIA(1): NVIDIA GPU GeForce GTX 280 (GT200) at PCI:2:0:0 (GPU-1)
[ 6799.623] (--) NVIDIA(1): Memory: 1048576 kBytes
[ 6799.623] (--) NVIDIA(1): VideoBIOS: 62.00.1c.00.80
[ 6799.623] (II) NVIDIA(1): Detected PCI Express Link width: 16X
[ 6799.623] (--) NVIDIA(1): Interlaced video modes are supported on this GPU
[ 6799.623] (--) NVIDIA(1): Connected display device(s) on GeForce GTX 280 at PCI:2:0:0
[ 6799.623] (--) NVIDIA(1): Acer X223W (DFP-0)
[ 6799.623] (--) NVIDIA(1): Acer X223W (DFP-1)
[ 6799.623] (--) NVIDIA(1): Acer X223W (DFP-0): 330.0 MHz maximum pixel clock
[ 6799.623] (--) NVIDIA(1): Acer X223W (DFP-0): Internal Dual Link TMDS
[ 6799.623] (--) NVIDIA(1): Acer X223W (DFP-1): 330.0 MHz maximum pixel clock
[ 6799.623] (--) NVIDIA(1): Acer X223W (DFP-1): Internal Dual Link TMDS
[ 6799.627] (II) NVIDIA(1): Display Device found referenced in MetaMode: DFP-0
[ 6799.667] (II) NVIDIA(1): Assigned Display Device: DFP-0
[ 6799.667] (II) NVIDIA(1): Validated modes:
[ 6799.667] (II) NVIDIA(1): "DFP-0:nvidia-auto-select+0+0"
[ 6799.667] (II) NVIDIA(1): Virtual screen size determined to be 1680 x 1050
[ 6799.674] (--) NVIDIA(1): DPI set to (90, 88); computed from "UseEdidDpi" X config
[ 6799.674] (--) NVIDIA(1): option
[ 6799.674] (WW) NVIDIA(1): 32-bit ARGB GLX visuals are not currently supported with the
[ 6799.674] (WW) NVIDIA(1): Xinerama extension.
[ 6799.674] (WW) NVIDIA(1): Disabling 32-bit ARGB GLX visuals.
[ 6799.674] (**) NVIDIA(2): Depth 24, (--) framebuffer bpp 32
[ 6799.674] (==) NVIDIA(2): RGB weight 888
[ 6799.674] (==) NVIDIA(2): Default visual is TrueColor
[ 6799.674] (==) NVIDIA(2): Using gamma correction (1.0, 1.0, 1.0)
[ 6799.674] (**) NVIDIA(2): Option "NoLogo" "True"
[ 6799.674] (**) NVIDIA(2): Option "TwinView" "0"
[ 6799.674] (**) NVIDIA(2): Option "MetaModes" "DFP-1: nvidia-auto-select +0+0"
[ 6799.674] (II) NVIDIA(2): NVIDIA GPU GeForce GTX 280 (GT200) at PCI:2:0:0 (GPU-1)
[ 6799.674] (--) NVIDIA(2): Memory: 1048576 kBytes
[ 6799.674] (--) NVIDIA(2): VideoBIOS: 62.00.1c.00.80
[ 6799.674] (II) NVIDIA(2): Detected PCI Express Link width: 16X
[ 6799.674] (--) NVIDIA(2): Interlaced video modes are supported on this GPU
[ 6799.674] (--) NVIDIA(2): Connected display device(s) on GeForce GTX 280 at PCI:2:0:0
[ 6799.675] (--) NVIDIA(2): Acer X223W (DFP-0)
[ 6799.675] (--) NVIDIA(2): Acer X223W (DFP-1)
[ 6799.675] (--) NVIDIA(2): Acer X223W (DFP-0): 330.0 MHz maximum pixel clock
[ 6799.675] (--) NVIDIA(2): Acer X223W (DFP-0): Internal Dual Link TMDS
[ 6799.675] (--) NVIDIA(2): Acer X223W (DFP-1): 330.0 MHz maximum pixel clock
[ 6799.675] (--) NVIDIA(2): Acer X223W (DFP-1): Internal Dual Link TMDS
[ 6799.679] (II) NVIDIA(2): Display Device found referenced in MetaMode: DFP-1
[ 6799.719] (II) NVIDIA(2): Assigned Display Device: DFP-1
[ 6799.719] (II) NVIDIA(2): Validated modes:
[ 6799.719] (II) NVIDIA(2): "DFP-1:nvidia-auto-select+0+0"
[ 6799.719] (II) NVIDIA(2): Virtual screen size determined to be 1680 x 1050
[ 6799.727] (--) NVIDIA(2): DPI set to (90, 88); computed from "UseEdidDpi" X config
[ 6799.727] (--) NVIDIA(2): option
[ 6799.727] (WW) NVIDIA(2): 32-bit ARGB GLX visuals are not currently supported with the
[ 6799.727] (WW) NVIDIA(2): Xinerama extension.
[ 6799.727] (WW) NVIDIA(2): Disabling 32-bit ARGB GLX visuals.
[ 6799.727] (--) Depth 24 pixmap format is 32 bpp
[ 6799.727] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 6799.736] (II) NVIDIA(0): Setting mode "nvidia-auto-select+0+0"
[ 6799.762] (II) Loading extension NV-GLX
[ 6799.832] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 6799.832] (==) NVIDIA(0): Backing store disabled
[ 6799.832] (==) NVIDIA(0): Silken mouse enabled
[ 6799.832] (**) NVIDIA(0): DPMS enabled
[ 6799.832] (II) Loading extension NV-CONTROL
[ 6799.832] (II) Loading sub module "dri2"
[ 6799.832] (II) LoadModule: "dri2"
[ 6799.833] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 6799.833] (II) Module dri2: vendor="X.Org Foundation"
[ 6799.833] compiled for 1.10.1, module version = 1.2.0
[ 6799.833] ABI class: X.Org Server Extension, version 5.0
[ 6799.833] (II) NVIDIA(0): [DRI2] Setup complete
[ 6799.833] (==) RandR enabled
[ 6799.842] (II) NVIDIA(1): Setting mode "DFP-0:nvidia-auto-select+0+0"
[ 6799.917] (==) NVIDIA(1): Disabling shared memory pixmaps
[ 6799.917] (==) NVIDIA(1): Backing store disabled
[ 6799.917] (==) NVIDIA(1): Silken mouse enabled
[ 6799.917] (**) NVIDIA(1): DPMS enabled
[ 6799.918] (II) Loading sub module "dri2"
[ 6799.918] (II) LoadModule: "dri2"
[ 6799.918] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 6799.918] (II) Module dri2: vendor="X.Org Foundation"
[ 6799.918] compiled for 1.10.1, module version = 1.2.0
[ 6799.918] ABI class: X.Org Server Extension, version 5.0
[ 6799.918] (II) NVIDIA(1): [DRI2] Setup complete
[ 6799.918] (==) RandR enabled
[ 6799.923] (II) NVIDIA(2): Setting mode "DFP-1:nvidia-auto-select+0+0"
[ 6800.054] (==) NVIDIA(2): Disabling shared memory pixmaps
[ 6800.054] (==) NVIDIA(2): Backing store disabled
[ 6800.054] (==) NVIDIA(2): Silken mouse enabled
[ 6800.054] (**) NVIDIA(2): DPMS enabled
[ 6800.054] (II) Loading sub module "dri2"
[ 6800.054] (II) LoadModule: "dri2"
[ 6800.055] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 6800.055] (II) Module dri2: vendor="X.Org Foundation"
[ 6800.055] compiled for 1.10.1, module version = 1.2.0
[ 6800.055] ABI class: X.Org Server Extension, version 5.0
[ 6800.055] (II) NVIDIA(2): [DRI2] Setup complete
[ 6800.055] (==) RandR enabled
[ 6800.055] (II) Initializing built-in extension Generic Event Extension
[ 6800.055] (II) Initializing built-in extension SHAPE
[ 6800.055] (II) Initializing built-in extension MIT-SHM
[ 6800.055] (II) Initializing built-in extension XInputExtension
[ 6800.055] (II) Initializing built-in extension XTEST
[ 6800.055] (II) Initializing built-in extension BIG-REQUESTS
[ 6800.055] (II) Initializing built-in extension SYNC
[ 6800.055] (II) Initializing built-in extension XKEYBOARD
[ 6800.055] (II) Initializing built-in extension XC-MISC
[ 6800.055] (II) Initializing built-in extension SECURITY
[ 6800.055] (II) Initializing built-in extension XINERAMA
[ 6800.055] (II) Initializing built-in extension XFIXES
[ 6800.055] (II) Initializing built-in extension RENDER
[ 6800.055] (II) Initializing built-in extension RANDR
[ 6800.055] (II) Initializing built-in extension COMPOSITE
[ 6800.055] (II) Initializing built-in extension DAMAGE
[ 6800.055] (II) Initializing built-in extension GESTURE
[ 6800.055] (II) Initializing extension GLX
[ 6800.059] (WW) NVIDIA(0): Xinerama is enabled, so RandR has likely been disabled by the
[ 6800.059] (WW) NVIDIA(0): X server.
[ 6800.059] (WW) NVIDIA(1): Xinerama is enabled, so RandR has likely been disabled by the
[ 6800.059] (WW) NVIDIA(1): X server.
[ 6800.059] (WW) NVIDIA(2): Xinerama is enabled, so RandR has likely been disabled by the
[ 6800.059] (WW) NVIDIA(2): X server.
[ 6800.258] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 6800.265] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 6800.265] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6800.265] (II) LoadModule: "evdev"
[ 6800.265] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6800.265] (II) Module evdev: vendor="X.Org Foundation"
[ 6800.265] compiled for 1.10.0.902, module version = 2.6.0
[ 6800.265] Module class: X.Org XInput Driver
[ 6800.265] ABI class: X.Org XInput driver, version 12.3
[ 6800.265] (II) Using input driver 'evdev' for 'Power Button'
[ 6800.265] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6800.265] (**) Power Button: always reports core events
[ 6800.265] (**) Power Button: Device: "/dev/input/event1"
[ 6800.360] (--) Power Button: Found keys
[ 6800.360] (II) Power Button: Configuring as keyboard
[ 6800.360] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 6800.360] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 6800.360] (**) Option "xkb_rules" "evdev"
[ 6800.360] (**) Option "xkb_model" "pc105"
[ 6800.360] (**) Option "xkb_layout" "us"
[ 6800.363] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 6800.363] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 6800.363] (II) Using input driver 'evdev' for 'Power Button'
[ 6800.363] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6800.363] (**) Power Button: always reports core events
[ 6800.363] (**) Power Button: Device: "/dev/input/event0"
[ 6800.490] (--) Power Button: Found keys
[ 6800.490] (II) Power Button: Configuring as keyboard
[ 6800.490] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 6800.490] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 6800.490] (**) Option "xkb_rules" "evdev"
[ 6800.490] (**) Option "xkb_model" "pc105"
[ 6800.490] (**) Option "xkb_layout" "us"
[ 6800.497] (II) config/udev: Adding input device Microsoft SideWinder™ Mouse (/dev/input/event2)
[ 6800.497] (**) Microsoft SideWinder™ Mouse: Applying InputClass "evdev pointer catchall"
[ 6800.497] (**) Microsoft SideWinder™ Mouse: Applying InputClass "evdev keyboard catchall"
[ 6800.497] (II) Using input driver 'evdev' for 'Microsoft SideWinder™ Mouse'
[ 6800.497] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6800.497] (**) Microsoft SideWinder™ Mouse: always reports core events
[ 6800.497] (**) Microsoft SideWinder™ Mouse: Device: "/dev/input/event2"
[ 6800.560] (--) Microsoft SideWinder™ Mouse: Found 9 mouse buttons
[ 6800.560] (--) Microsoft SideWinder™ Mouse: Found scroll wheel(s)
[ 6800.560] (--) Microsoft SideWinder™ Mouse: Found relative axes
[ 6800.560] (--) Microsoft SideWinder™ Mouse: Found x and y relative axes
[ 6800.560] (--) Microsoft SideWinder™ Mouse: Found absolute axes
[ 6800.560] (II) evdev-grail: failed to open grail, no gesture support
[ 6800.560] (--) Microsoft SideWinder™ Mouse: Found x and y absolute axes
[ 6800.560] (--) Microsoft SideWinder™ Mouse: Found keys
[ 6800.560] (II) Microsoft SideWinder™ Mouse: Configuring as mouse
[ 6800.560] (II) Microsoft SideWinder™ Mouse: Configuring as keyboard
[ 6800.560] (II) Microsoft SideWinder™ Mouse: Adding scrollwheel support
[ 6800.560] (**) Microsoft SideWinder™ Mouse: YAxisMapping: buttons 4 and 5
[ 6800.560] (**) Microsoft SideWinder™ Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6800.560] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.1/2-5.1:1.0/input/input2/event2"
[ 6800.560] (II) XINPUT: Adding extended input device "Microsoft SideWinder™ Mouse" (type: KEYBOARD)
[ 6800.560] (**) Option "xkb_rules" "evdev"
[ 6800.560] (**) Option "xkb_model" "pc105"
[ 6800.560] (**) Option "xkb_layout" "us"
[ 6800.560] (II) Microsoft SideWinder™ Mouse: initialized for relative axes.
[ 6800.560] (WW) Microsoft SideWinder™ Mouse: ignoring absolute axes.
[ 6800.561] (**) Microsoft SideWinder™ Mouse: (accel) keeping acceleration scheme 1
[ 6800.561] (**) Microsoft SideWinder™ Mouse: (accel) acceleration profile 0
[ 6800.561] (**) Microsoft SideWinder™ Mouse: (accel) acceleration factor: 2.000
[ 6800.561] (**) Microsoft SideWinder™ Mouse: (accel) acceleration threshold: 4
[ 6800.561] (II) config/udev: Adding input device Microsoft SideWinder™ Mouse (/dev/input/js0)
[ 6800.561] (II) No input driver/identifier specified (ignoring)
[ 6800.561] (II) config/udev: Adding input device Microsoft SideWinder™ Mouse (/dev/input/mouse0)
[ 6800.561] (II) No input driver/identifier specified (ignoring)
[ 6800.562] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event3)
[ 6800.562] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 6800.562] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 6800.562] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6800.562] (**) Logitech USB Receiver: always reports core events
[ 6800.562] (**) Logitech USB Receiver: Device: "/dev/input/event3"
[ 6800.680] (--) Logitech USB Receiver: Found keys
[ 6800.680] (II) Logitech USB Receiver: Configuring as keyboard
[ 6800.680] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.2/2-5.2:1.0/input/input3/event3"
[ 6800.680] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 6800.680] (**) Option "xkb_rules" "evdev"
[ 6800.680] (**) Option "xkb_model" "pc105"
[ 6800.680] (**) Option "xkb_layout" "us"
[ 6800.681] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event4)
[ 6800.681] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 6800.681] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 6800.681] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 6800.681] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6800.681] (**) Logitech USB Receiver: always reports core events
[ 6800.681] (**) Logitech USB Receiver: Device: "/dev/input/event4"
[ 6800.681] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 6800.681] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 6800.681] (--) Logitech USB Receiver: Found relative axes
[ 6800.681] (--) Logitech USB Receiver: Found x and y relative axes
[ 6800.681] (--) Logitech USB Receiver: Found absolute axes
[ 6800.681] (II) evdev-grail: failed to open grail, no gesture support
[ 6800.681] (--) Logitech USB Receiver: Found keys
[ 6800.681] (II) Logitech USB Receiver: Configuring as mouse
[ 6800.681] (II) Logitech USB Receiver: Configuring as keyboard
[ 6800.681] (II) Logitech USB Receiver: Adding scrollwheel support
[ 6800.681] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 6800.681] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 6800.681] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.2/2-5.2:1.1/input/input4/event4"
[ 6800.681] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD)
[ 6800.681] (**) Option "xkb_rules" "evdev"
[ 6800.681] (**) Option "xkb_model" "pc105"
[ 6800.681] (**) Option "xkb_layout" "us"
[ 6800.681] (II) Logitech USB Receiver: initialized for relative axes.
[ 6800.682] (WW) Logitech USB Receiver: ignoring absolute axes.
[ 6800.682] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 6800.682] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 6800.682] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 6800.682] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 6800.682] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse1)
[ 6800.682] (II) No input driver/identifier specified (ignoring)
[ 6800.683] (II) config/udev: Adding input device Microsoft® LifeCam HD-5000 (/dev/input/event5)
[ 6800.683] (**) Microsoft® LifeCam HD-5000: Applying InputClass "evdev keyboard catchall"
[ 6800.683] (II) Using input driver 'evdev' for 'Microsoft® LifeCam HD-5000'
[ 6800.683] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 6800.683] (**) Microsoft® LifeCam HD-5000: always reports core events
[ 6800.683] (**) Microsoft® LifeCam HD-5000: Device: "/dev/input/event5"
[ 6800.683] (--) Microsoft® LifeCam HD-5000: Found keys
[ 6800.683] (II) Microsoft® LifeCam HD-5000: Configuring as keyboard
[ 6800.683] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.3/2-5.3:1.0/input/input5/event5"
[ 6800.683] (II) XINPUT: Adding extended input device "Microsoft® LifeCam HD-5000" (type: KEYBOARD)
[ 6800.683] (**) Option "xkb_rules" "evdev"
[ 6800.683] (**) Option "xkb_model" "pc105"
[ 6800.683] (**) Option "xkb_layout" "us"

icedown
May 23rd, 2011, 03:40 AM
Still trying to get this to work but still the same problems.