paddy.melon
May 18th, 2011, 12:05 PM
So, I've been playing a lot lately and somehow stuffed my drivers, etc., etc. I didn't have a backup of my xorg.conf so I've had to generate a new one. This is all fine. Only, for some reason, my old Samsung Monitor (CRT-0) won't give an EDID (I swear it did before). Thus, it's setup as 640x480 by default. Naturally, this is really, really annoying and almost unusable as a secondary display to a 1366x786 Viewsonic (the CRT-1).
So, I've stuffed around for the past day or so with no luck. I've tried various ModeLines but I haven't done much of this before so I'm probably doing something wrong. Here's my xorg.conf so far. Everything is setup exactly how I like it except the resolution of the CRT-0:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-0"
# Modeline "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
# Option "UseEDID" "FALSE"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 240"
EndSection
Section "Screen"
# Removed Option "TwinView" "True"
# Removed Option "MetaModes" "1280x1024 1366x768"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "RenderAccel" "true"
Option "TwinView" "1"
# Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT-0: 1280x1024 +1366+288, CRT-1: 1366x768 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Thanks for any help!
So, I've stuffed around for the past day or so with no luck. I've tried various ModeLines but I haven't done much of this before so I'm probably doing something wrong. Here's my xorg.conf so far. Everything is setup exactly how I like it except the resolution of the CRT-0:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "CRT-0"
# Modeline "1280x1024_60.00" 109.00 1280 1368 1496 1712 1024 1027 1034 1063 -hsync +vsync
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
# Option "UseEDID" "FALSE"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 240"
EndSection
Section "Screen"
# Removed Option "TwinView" "True"
# Removed Option "MetaModes" "1280x1024 1366x768"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "RenderAccel" "true"
Option "TwinView" "1"
# Option "TwinViewXineramaInfoOrder" "CRT-0"
Option "metamodes" "CRT-0: 1280x1024 +1366+288, CRT-1: 1366x768 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Thanks for any help!