stephen67
April 28th, 2011, 10:27 PM
I started with a newly built system using an ASUS P8 H67-M LE Series MB, that has Intel's Sandy Bridge
The CPU is an i5
I installed the 64 bit Ubuntu, 11.04
In the Control Center, I go to the Monitor Preferences, and all the settings are grayed out.
Monitor in On is set.
Resolution, Refresh Rate and Rotation are disabled.
If I click the Apply button, I get a pop up window with the message:
The selected configuration for displays could not be applied
required virtual size does not fit available size ....
The Detect Monitors button is enabled, but clicking has no effect. No monitors are identified.
How do I get the monitor settings working?
Thanks
Stephen
I am going through a KVM switch.
The CPU is an i5
I installed the 64 bit Ubuntu, 11.04
In the Control Center, I go to the Monitor Preferences, and all the settings are grayed out.
Monitor in On is set.
Resolution, Refresh Rate and Rotation are disabled.
If I click the Apply button, I get a pop up window with the message:
The selected configuration for displays could not be applied
required virtual size does not fit available size ....
The Detect Monitors button is enabled, but clicking has no effect. No monitors are identified.
How do I get the monitor settings working?
Thanks
Stephen
I am going through a KVM switch.