Sam24J
March 16th, 2011, 10:18 PM
Hi all,
I'm a pretty inexperienced Linux user, but have installed it a few times on various computers. I had some issues with my laptop (Dell XPS M1330), and after a fresh install of ubuntu 10.10 I cannot boot. All I get is a flashing _ symbol in the top left of the screen like a command prompt, except I can't type anything. I searched a few other forums and it appears to be a boot issue. I utilised the Boot Info Script:
http://bootinfoscript.sourceforge.net/
Can anyone tell me what this means?
these are my results...
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> No boot loader is installed in the MBR of /dev/sda
sda1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 2,048 468,520,959 468,518,912 83 Linux
/dev/sda2 468,523,006 488,396,799 19,873,794 5 Extended
/dev/sda5 468,523,008 488,396,799 19,873,792 82 Linux swap / Solaris
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 66a2e4b9-e0a6-4e33-8831-11c909c1139a ext4
/dev/sda2: PTTYPE="dos"
/dev/sda5 cdb59f73-03f7-474f-bc39-6f9d9afb1cf8 swap
/dev/sda: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
=========================== sda1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 66a2e4b9-e0a6-4e33-8831-11c909c1139a
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 66a2e4b9-e0a6-4e33-8831-11c909c1139a
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-27-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 66a2e4b9-e0a6-4e33-8831-11c909c1139a
linux /boot/vmlinuz-2.6.35-27-generic-pae root=UUID=66a2e4b9-e0a6-4e33-8831-11c909c1139a ro quiet splash
initrd /boot/initrd.img-2.6.35-27-generic-pae
}
menuentry 'Ubuntu, with Linux 2.6.35-27-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 66a2e4b9-e0a6-4e33-8831-11c909c1139a
echo 'Loading Linux 2.6.35-27-generic-pae ...'
linux /boot/vmlinuz-2.6.35-27-generic-pae root=UUID=66a2e4b9-e0a6-4e33-8831-11c909c1139a ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-27-generic-pae
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 66a2e4b9-e0a6-4e33-8831-11c909c1139a
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 66a2e4b9-e0a6-4e33-8831-11c909c1139a
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=66a2e4b9-e0a6-4e33-8831-11c909c1139a / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=cdb59f73-03f7-474f-bc39-6f9d9afb1cf8 none swap sw 0 0
=================== sda1: Location of files loaded by Grub: ===================
116.1GB: boot/grub/core.img
137.6GB: boot/grub/grub.cfg
.8GB: boot/initrd.img-2.6.35-27-generic-pae
116.1GB: boot/vmlinuz-2.6.35-27-generic-pae
.8GB: initrd.img
116.1GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================
Unknown BootLoader on sda2
00000000 77 66 42 22 a4 4e 7c 6d 7c 00 6c 07 6c 00 6c 79 |wfB".N|m|.l.l.ly|
00000010 7c 07 22 7c 60 7c 00 36 fc 00 02 44 77 66 42 58 ||."|`|.6...DwfBX|
00000020 5c 1f 7c 07 7c 00 6c 07 6c 00 6c 06 6c 00 22 9c |\.|.|.l.l.l.l.".|
00000030 60 7c 00 2e fc 00 5c 17 9c 0f 7d 07 5c dc 07 7c |`|....\...}.\..||
00000040 00 6c 07 6c 00 6c 06 2a 0c 00 2a fc 00 7c 03 ac |.l.l.l.*..*..|..|
00000050 00 7f 48 d0 43 60 5c 0f 6c 6d 7c 00 bc 02 14 00 |..H.C`\.lm|.....|
00000060 a6 20 02 fc 00 6e 38 43 64 5c 07 6c af 7c 00 fc |. ...n8Cd\.l.|..|
00000070 07 2a ec 00 ac ce 28 ff 0c c7 2b 00 23 9c ed 8c |.*....(...+.#...|
00000080 05 60 65 80 01 24 ac 5b 7c 88 6c 07 a8 02 9c 63 |.`e..$.[|.l....c|
00000090 88 01 5e cc c2 00 2d 1c b3 6c 6e 7c 86 60 04 7c |..^...-..ln|.`.||
000000a0 7f 28 dc 00 7c 67 26 9e af 0f 42 2e dc 00 6c 7d |.(..|g&...B...l}|
000000b0 7c 0c 7c 06 7c ae 2d dc 00 9c 2a 7c 9a 2e dc 00 ||.|.|.-...*|....|
000000c0 7c 70 6c 07 6c 06 7c 07 fc 06 2e 3c 13 2e dc 00 ||pl.l.|....<....|
000000d0 6c 70 6c 06 7c 0d 7c 15 fc 06 7c 01 ac 00 bc 30 |lpl.|.|...|....0|
000000e0 2e dc 00 6c 6f 6c 1c 6c 07 2a bc 01 2e fc 12 2e |...lol.l.*......|
000000f0 dc 00 6c 7f 7c 0a 6c 06 2a 5c 04 5c 7e 7c 35 69 |..l.|.l.*\.\~|5i|
00000100 03 00 7c 96 2e dc 00 6c 40 7c 05 60 04 6c 07 31 |..|....l@|.`.l.1|
00000110 9c 02 7c 07 22 3d 21 42 7c 18 7c 04 22 10 ba 6c |..|."=!B|.|."..l|
00000120 74 7c 97 6c 02 7c 07 28 dc 00 7c 1a 94 04 70 00 |t|.l.|.(..|...p.|
00000130 2f dc 00 7c d5 7c 8e 70 03 2a dc 00 2e 7c 10 2e |/..|.|.p.*...|..|
00000140 9c 02 12 58 00 7c 75 6c 0e 31 dc 00 9c 37 7c 72 |...X.|ul.1...7|r|
00000150 2e dd 00 1e 5c 54 6c 29 7c 0d 6c 15 28 9c 02 64 |....\Tl)|.l.(..d|
00000160 02 6c 00 7c 15 23 5c 25 2f 7c 03 7c 0c 64 04 20 |.l.|.#\%/|.|.d. |
00000170 03 5c 04 6d 7f 68 70 05 25 ac 65 58 0e 25 1c 26 |.\.m.hp.%.eX.%.&|
00000180 24 cc 27 6c 10 6c 0f 2e cc 27 29 6c 01 dc 05 24 |$.'l.l...')l...$|
00000190 5c 28 ec 15 7c 05 5c 60 5c 59 22 dc 29 22 3c 87 |\(..|.\`\Y".)"<.|
000001a0 7c 5c 12 60 1c 22 dc 27 24 5c 2b 6c 04 68 0f 28 ||\.`.".'$\+l.h.(|
000001b0 7c 01 7c 02 22 cc 2a 10 05 b0 b3 bc 08 24 00 fe ||.|.".*......$..|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 40 2f 01 00 00 |...........@/...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
I'm a pretty inexperienced Linux user, but have installed it a few times on various computers. I had some issues with my laptop (Dell XPS M1330), and after a fresh install of ubuntu 10.10 I cannot boot. All I get is a flashing _ symbol in the top left of the screen like a command prompt, except I can't type anything. I searched a few other forums and it appears to be a boot issue. I utilised the Boot Info Script:
http://bootinfoscript.sourceforge.net/
Can anyone tell me what this means?
these are my results...
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> No boot loader is installed in the MBR of /dev/sda
sda1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 2,048 468,520,959 468,518,912 83 Linux
/dev/sda2 468,523,006 488,396,799 19,873,794 5 Extended
/dev/sda5 468,523,008 488,396,799 19,873,792 82 Linux swap / Solaris
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 66a2e4b9-e0a6-4e33-8831-11c909c1139a ext4
/dev/sda2: PTTYPE="dos"
/dev/sda5 cdb59f73-03f7-474f-bc39-6f9d9afb1cf8 swap
/dev/sda: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
=========================== sda1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 66a2e4b9-e0a6-4e33-8831-11c909c1139a
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 66a2e4b9-e0a6-4e33-8831-11c909c1139a
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-27-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 66a2e4b9-e0a6-4e33-8831-11c909c1139a
linux /boot/vmlinuz-2.6.35-27-generic-pae root=UUID=66a2e4b9-e0a6-4e33-8831-11c909c1139a ro quiet splash
initrd /boot/initrd.img-2.6.35-27-generic-pae
}
menuentry 'Ubuntu, with Linux 2.6.35-27-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 66a2e4b9-e0a6-4e33-8831-11c909c1139a
echo 'Loading Linux 2.6.35-27-generic-pae ...'
linux /boot/vmlinuz-2.6.35-27-generic-pae root=UUID=66a2e4b9-e0a6-4e33-8831-11c909c1139a ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-27-generic-pae
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 66a2e4b9-e0a6-4e33-8831-11c909c1139a
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 66a2e4b9-e0a6-4e33-8831-11c909c1139a
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=66a2e4b9-e0a6-4e33-8831-11c909c1139a / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=cdb59f73-03f7-474f-bc39-6f9d9afb1cf8 none swap sw 0 0
=================== sda1: Location of files loaded by Grub: ===================
116.1GB: boot/grub/core.img
137.6GB: boot/grub/grub.cfg
.8GB: boot/initrd.img-2.6.35-27-generic-pae
116.1GB: boot/vmlinuz-2.6.35-27-generic-pae
.8GB: initrd.img
116.1GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================
Unknown BootLoader on sda2
00000000 77 66 42 22 a4 4e 7c 6d 7c 00 6c 07 6c 00 6c 79 |wfB".N|m|.l.l.ly|
00000010 7c 07 22 7c 60 7c 00 36 fc 00 02 44 77 66 42 58 ||."|`|.6...DwfBX|
00000020 5c 1f 7c 07 7c 00 6c 07 6c 00 6c 06 6c 00 22 9c |\.|.|.l.l.l.l.".|
00000030 60 7c 00 2e fc 00 5c 17 9c 0f 7d 07 5c dc 07 7c |`|....\...}.\..||
00000040 00 6c 07 6c 00 6c 06 2a 0c 00 2a fc 00 7c 03 ac |.l.l.l.*..*..|..|
00000050 00 7f 48 d0 43 60 5c 0f 6c 6d 7c 00 bc 02 14 00 |..H.C`\.lm|.....|
00000060 a6 20 02 fc 00 6e 38 43 64 5c 07 6c af 7c 00 fc |. ...n8Cd\.l.|..|
00000070 07 2a ec 00 ac ce 28 ff 0c c7 2b 00 23 9c ed 8c |.*....(...+.#...|
00000080 05 60 65 80 01 24 ac 5b 7c 88 6c 07 a8 02 9c 63 |.`e..$.[|.l....c|
00000090 88 01 5e cc c2 00 2d 1c b3 6c 6e 7c 86 60 04 7c |..^...-..ln|.`.||
000000a0 7f 28 dc 00 7c 67 26 9e af 0f 42 2e dc 00 6c 7d |.(..|g&...B...l}|
000000b0 7c 0c 7c 06 7c ae 2d dc 00 9c 2a 7c 9a 2e dc 00 ||.|.|.-...*|....|
000000c0 7c 70 6c 07 6c 06 7c 07 fc 06 2e 3c 13 2e dc 00 ||pl.l.|....<....|
000000d0 6c 70 6c 06 7c 0d 7c 15 fc 06 7c 01 ac 00 bc 30 |lpl.|.|...|....0|
000000e0 2e dc 00 6c 6f 6c 1c 6c 07 2a bc 01 2e fc 12 2e |...lol.l.*......|
000000f0 dc 00 6c 7f 7c 0a 6c 06 2a 5c 04 5c 7e 7c 35 69 |..l.|.l.*\.\~|5i|
00000100 03 00 7c 96 2e dc 00 6c 40 7c 05 60 04 6c 07 31 |..|....l@|.`.l.1|
00000110 9c 02 7c 07 22 3d 21 42 7c 18 7c 04 22 10 ba 6c |..|."=!B|.|."..l|
00000120 74 7c 97 6c 02 7c 07 28 dc 00 7c 1a 94 04 70 00 |t|.l.|.(..|...p.|
00000130 2f dc 00 7c d5 7c 8e 70 03 2a dc 00 2e 7c 10 2e |/..|.|.p.*...|..|
00000140 9c 02 12 58 00 7c 75 6c 0e 31 dc 00 9c 37 7c 72 |...X.|ul.1...7|r|
00000150 2e dd 00 1e 5c 54 6c 29 7c 0d 6c 15 28 9c 02 64 |....\Tl)|.l.(..d|
00000160 02 6c 00 7c 15 23 5c 25 2f 7c 03 7c 0c 64 04 20 |.l.|.#\%/|.|.d. |
00000170 03 5c 04 6d 7f 68 70 05 25 ac 65 58 0e 25 1c 26 |.\.m.hp.%.eX.%.&|
00000180 24 cc 27 6c 10 6c 0f 2e cc 27 29 6c 01 dc 05 24 |$.'l.l...')l...$|
00000190 5c 28 ec 15 7c 05 5c 60 5c 59 22 dc 29 22 3c 87 |\(..|.\`\Y".)"<.|
000001a0 7c 5c 12 60 1c 22 dc 27 24 5c 2b 6c 04 68 0f 28 ||\.`.".'$\+l.h.(|
000001b0 7c 01 7c 02 22 cc 2a 10 05 b0 b3 bc 08 24 00 fe ||.|.".*......$..|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 40 2f 01 00 00 |...........@/...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200