upgraded from 10.04 to 10.10 now stuck at grub prompt

[railman]

Hi All,

I upgraded my dell inspiron 6000 from ubuntu 10.04 to 10.10 then rebooted and now I am stuck at the grub prompt.
I am able to boot from a flash drive and have run the boot script.

This laptop did not have a dual boot system on it but it did have windows on it at one time, converted to ubuntu.
hopefully someone can help.

[Quackers]

Welcome to UF :-)
Here is your boot script output in CODE tags

Boot Info Script 0.55 dated February 15th, 2010

============================= Boot Info Summary: ==============================

=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for (,msdos1)/boot/grub.
=> Syslinux is installed in the MBR of /dev/sdb

sda1: __________________________________________________ _______________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda2: __________________________________________________ _______________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sda5: __________________________________________________ _______________________

File system: swap
Boot sector type: -
Boot sector info:

sdb1: __________________________________________________ _______________________

File system: vfat
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ __________________________________________________ ___

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start End Size Id System

/dev/sda1 * 2,048 485,332,991 485,330,944 83 Linux
/dev/sda2 485,335,038 488,396,799 3,061,762 5 Extended
/dev/sda5 485,335,040 488,396,799 3,061,760 82 Linux swap / Solaris


Drive: sdb ___________________ __________________________________________________ ___

Disk /dev/sdb: 2002 MB, 2002779648 bytes
255 heads, 63 sectors/track, 243 cylinders, total 3911679 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start End Size Id System

/dev/sdb1 * 63 3,911,678 3,911,616 c W95 FAT32 (LBA)


blkid -c /dev/null: __________________________________________________ __________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/ramzswap0 swap
/dev/sda1 657924bb-62b4-4c20-b811-d88ff36f6e75 ext4
/dev/sda2: PTTYPE="dos"
/dev/sda5 53532410-bd22-49d3-bc01-0f1c0061dc65 swap
/dev/sda: PTTYPE="dos"
/dev/sdb1 1407-0B30 vfat PENDRIVE
/dev/sdb: PTTYPE="dos"

============================ "mount | grep ^/dev output: ===========================

Device Mount_Point Type Options

aufs / aufs (rw)
/dev/sdb1 /cdrom vfat (rw,relatime,fmask=0022,dmask=0022,codepage=cp437, iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda1 /media/657924bb-62b4-4c20-b811-d88ff36f6e75 ext4 (rw,nosuid,nodev,uhelper=udisks)


=========================== sda1/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
insmod vbe
insmod vga
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 657924bb-62b4-4c20-b811-d88ff36f6e75
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 657924bb-62b4-4c20-b811-d88ff36f6e75
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 657924bb-62b4-4c20-b811-d88ff36f6e75
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=657924bb-62b4-4c20-b811-d88ff36f6e75 ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 657924bb-62b4-4c20-b811-d88ff36f6e75
echo 'Loading Linux 2.6.35-22-generic ...'
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=657924bb-62b4-4c20-b811-d88ff36f6e75 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 657924bb-62b4-4c20-b811-d88ff36f6e75
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 657924bb-62b4-4c20-b811-d88ff36f6e75
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

=============================== sda1/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=657924bb-62b4-4c20-b811-d88ff36f6e75 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=53532410-bd22-49d3-bc01-0f1c0061dc65 none swap sw 0 0

=================== sda1: Location of files loaded by Grub: ===================


43.0GB: boot/grub/core.img
197.7GB: boot/grub/grub.cfg
.8GB: boot/initrd.img-2.6.35-22-generic
.3GB: boot/vmlinuz-2.6.35-22-generic
.8GB: initrd.img
.3GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================

Unknown BootLoader on sdb1

00000000 eb 58 90 53 59 53 4c 49 4e 55 58 00 02 08 20 00 |.X.SYSLINUX... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 3f 00 00 00 |........?...?...|
00000020 c0 af 3b 00 e5 0e 00 00 00 00 00 00 02 00 00 00 |..;.............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 00 29 30 0b 07 14 4e 4f 20 4e 41 4d 45 20 20 |..)0...NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 fa fc 31 c9 8e d1 | FAT32 ..1...|
00000060 bc 76 7b 52 06 57 8e c1 b1 26 bf 78 7b f3 a5 8e |.v{R.W...&.x{...|
00000070 d9 bb 78 00 0f b4 37 0f a0 56 20 d2 78 1b 31 c0 |..x...7..V .x.1.|
00000080 b1 06 89 3f 89 47 02 f3 64 a5 8a 0e 18 7c 88 4d |...?.G..d....|.M|
00000090 bc 50 50 50 50 cd 13 eb 4b f6 45 b4 7f 75 25 38 |.PPPP...K.E..u%8|
000000a0 4d b8 74 20 66 3d 21 47 50 54 75 10 80 7d b8 ed |M.t f=!GPTu..}..|
000000b0 75 0a 66 ff 75 ec 66 ff 75 e8 eb 0f 51 51 66 ff |u.f.u.f.u...QQf.|
000000c0 75 bc eb 07 51 51 66 ff 36 1c 7c b4 08 cd 13 72 |u...QQf.6.|....r|
000000d0 13 20 e4 75 0f c1 ea 08 42 89 16 1a 7c 83 e1 3f |. .u....B...|..?|
000000e0 89 0e 18 7c fb bb aa 55 b4 41 8a 16 74 7b cd 13 |...|...U.A..t{..|
000000f0 72 10 81 fb 55 aa 75 0a f6 c1 01 74 05 c6 06 32 |r...U.u....t...2|
00000100 7d 00 66 b8 f2 1d 00 00 66 ba 00 00 00 00 bb 00 |}.f.....f.......|
00000110 7e e8 10 00 66 81 3e 24 7e 34 be f5 72 75 76 ea |~...f.>$~4..ruv.|
00000120 38 7e 00 00 66 03 06 64 7b 66 13 16 68 7b b9 10 |8~..f..d{f..h{..|
00000130 00 eb 2b 66 52 66 50 06 53 6a 01 6a 10 89 e6 66 |..+fRfP.Sj.j...f|
00000140 60 b4 42 e8 7f 00 66 61 8d 64 10 72 01 c3 66 60 |`.B...fa.d.r..f`|
00000150 31 c0 e8 70 00 66 61 e2 da c6 06 32 7d 2b 66 60 |1..p.fa....2}+f`|
00000160 66 0f b7 36 18 7c 66 0f b7 3e 1a 7c 66 f7 f6 31 |f..6.|f..>.|f..1|
00000170 c9 87 ca 66 f7 f7 66 3d ff 03 00 00 77 17 c0 e4 |...f..f=....w...|
00000180 06 41 08 e1 88 c5 88 d6 b8 01 02 e8 37 00 66 61 |.A..........7.fa|
00000190 72 01 c3 e2 c9 31 f6 8e d6 bc 6c 7b 8e de 66 8f |r....1....l{..f.|
000001a0 06 78 00 be cc 7d e8 09 00 31 c0 cd 16 cd 19 f4 |.x...}...1......|
000001b0 eb fd 66 60 ac 20 c0 74 09 b4 0e bb 07 00 cd 10 |..f`. .t........|
000001c0 eb f2 66 61 c3 8a 16 74 7b cd 13 c3 42 6f 6f 74 |..fa...t{...Boot|
000001d0 20 65 72 72 6f 72 0d 0a 00 00 00 00 00 00 00 00 | error..........|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200


I don't see anything wrong with your boot script output. I would suggest that you re-install grub by using the following commands from the Ubuntu Live cd/usb desktop. Please copy/paste them into a terminal window one at a time, pressing enter after each line.

sudo mount /dev/sda1 /mnt
sudo grub-install --root-directory=/mnt /dev/sda
If these commands run without any error please reboot and see if Ubuntu boots ok.

[oldfred]

Not sure if this is problem or not but Quackers reinstall grub is the correct solution.

No drive shown? (hd0,msdos1) is more typical.

partition #1 for (,msdos1)/boot/grub.

Nevermind, I just reran my boot script on my portable and it is identical. No drive shown.

[railman]

Welcome to UF :-)
Here is your boot script output in CODE tags

Boot Info Script 0.55 dated February 15th, 2010

============================= Boot Info Summary: ==============================

=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for (,msdos1)/boot/grub.
=> Syslinux is installed in the MBR of /dev/sdb

sda1: __________________________________________________ _______________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda2: __________________________________________________ _______________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sda5: __________________________________________________ _______________________

File system: swap
Boot sector type: -
Boot sector info:

sdb1: __________________________________________________ _______________________

File system: vfat
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ __________________________________________________ ___

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start End Size Id System

/dev/sda1 * 2,048 485,332,991 485,330,944 83 Linux
/dev/sda2 485,335,038 488,396,799 3,061,762 5 Extended
/dev/sda5 485,335,040 488,396,799 3,061,760 82 Linux swap / Solaris


Drive: sdb ___________________ __________________________________________________ ___

Disk /dev/sdb: 2002 MB, 2002779648 bytes
255 heads, 63 sectors/track, 243 cylinders, total 3911679 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start End Size Id System

/dev/sdb1 * 63 3,911,678 3,911,616 c W95 FAT32 (LBA)


blkid -c /dev/null: __________________________________________________ __________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/ramzswap0 swap
/dev/sda1 657924bb-62b4-4c20-b811-d88ff36f6e75 ext4
/dev/sda2: PTTYPE="dos"
/dev/sda5 53532410-bd22-49d3-bc01-0f1c0061dc65 swap
/dev/sda: PTTYPE="dos"
/dev/sdb1 1407-0B30 vfat PENDRIVE
/dev/sdb: PTTYPE="dos"

============================ "mount | grep ^/dev output: ===========================

Device Mount_Point Type Options

aufs / aufs (rw)
/dev/sdb1 /cdrom vfat (rw,relatime,fmask=0022,dmask=0022,codepage=cp437, iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda1 /media/657924bb-62b4-4c20-b811-d88ff36f6e75 ext4 (rw,nosuid,nodev,uhelper=udisks)


=========================== sda1/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
insmod vbe
insmod vga
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 657924bb-62b4-4c20-b811-d88ff36f6e75
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 657924bb-62b4-4c20-b811-d88ff36f6e75
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 657924bb-62b4-4c20-b811-d88ff36f6e75
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=657924bb-62b4-4c20-b811-d88ff36f6e75 ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 657924bb-62b4-4c20-b811-d88ff36f6e75
echo 'Loading Linux 2.6.35-22-generic ...'
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=657924bb-62b4-4c20-b811-d88ff36f6e75 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 657924bb-62b4-4c20-b811-d88ff36f6e75
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 657924bb-62b4-4c20-b811-d88ff36f6e75
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

=============================== sda1/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=657924bb-62b4-4c20-b811-d88ff36f6e75 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=53532410-bd22-49d3-bc01-0f1c0061dc65 none swap sw 0 0

=================== sda1: Location of files loaded by Grub: ===================


43.0GB: boot/grub/core.img
197.7GB: boot/grub/grub.cfg
.8GB: boot/initrd.img-2.6.35-22-generic
.3GB: boot/vmlinuz-2.6.35-22-generic
.8GB: initrd.img
.3GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================

Unknown BootLoader on sdb1

00000000 eb 58 90 53 59 53 4c 49 4e 55 58 00 02 08 20 00 |.X.SYSLINUX... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 3f 00 00 00 |........?...?...|
00000020 c0 af 3b 00 e5 0e 00 00 00 00 00 00 02 00 00 00 |..;.............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 00 29 30 0b 07 14 4e 4f 20 4e 41 4d 45 20 20 |..)0...NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 fa fc 31 c9 8e d1 | FAT32 ..1...|
00000060 bc 76 7b 52 06 57 8e c1 b1 26 bf 78 7b f3 a5 8e |.v{R.W...&.x{...|
00000070 d9 bb 78 00 0f b4 37 0f a0 56 20 d2 78 1b 31 c0 |..x...7..V .x.1.|
00000080 b1 06 89 3f 89 47 02 f3 64 a5 8a 0e 18 7c 88 4d |...?.G..d....|.M|
00000090 bc 50 50 50 50 cd 13 eb 4b f6 45 b4 7f 75 25 38 |.PPPP...K.E..u%8|
000000a0 4d b8 74 20 66 3d 21 47 50 54 75 10 80 7d b8 ed |M.t f=!GPTu..}..|
000000b0 75 0a 66 ff 75 ec 66 ff 75 e8 eb 0f 51 51 66 ff |u.f.u.f.u...QQf.|
000000c0 75 bc eb 07 51 51 66 ff 36 1c 7c b4 08 cd 13 72 |u...QQf.6.|....r|
000000d0 13 20 e4 75 0f c1 ea 08 42 89 16 1a 7c 83 e1 3f |. .u....B...|..?|
000000e0 89 0e 18 7c fb bb aa 55 b4 41 8a 16 74 7b cd 13 |...|...U.A..t{..|
000000f0 72 10 81 fb 55 aa 75 0a f6 c1 01 74 05 c6 06 32 |r...U.u....t...2|
00000100 7d 00 66 b8 f2 1d 00 00 66 ba 00 00 00 00 bb 00 |}.f.....f.......|
00000110 7e e8 10 00 66 81 3e 24 7e 34 be f5 72 75 76 ea |~...f.>$~4..ruv.|
00000120 38 7e 00 00 66 03 06 64 7b 66 13 16 68 7b b9 10 |8~..f..d{f..h{..|
00000130 00 eb 2b 66 52 66 50 06 53 6a 01 6a 10 89 e6 66 |..+fRfP.Sj.j...f|
00000140 60 b4 42 e8 7f 00 66 61 8d 64 10 72 01 c3 66 60 |`.B...fa.d.r..f`|
00000150 31 c0 e8 70 00 66 61 e2 da c6 06 32 7d 2b 66 60 |1..p.fa....2}+f`|
00000160 66 0f b7 36 18 7c 66 0f b7 3e 1a 7c 66 f7 f6 31 |f..6.|f..>.|f..1|
00000170 c9 87 ca 66 f7 f7 66 3d ff 03 00 00 77 17 c0 e4 |...f..f=....w...|
00000180 06 41 08 e1 88 c5 88 d6 b8 01 02 e8 37 00 66 61 |.A..........7.fa|
00000190 72 01 c3 e2 c9 31 f6 8e d6 bc 6c 7b 8e de 66 8f |r....1....l{..f.|
000001a0 06 78 00 be cc 7d e8 09 00 31 c0 cd 16 cd 19 f4 |.x...}...1......|
000001b0 eb fd 66 60 ac 20 c0 74 09 b4 0e bb 07 00 cd 10 |..f`. .t........|
000001c0 eb f2 66 61 c3 8a 16 74 7b cd 13 c3 42 6f 6f 74 |..fa...t{...Boot|
000001d0 20 65 72 72 6f 72 0d 0a 00 00 00 00 00 00 00 00 | error..........|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200


I don't see anything wrong with your boot script output. I would suggest that you re-install grub by using the following commands from the Ubuntu Live cd/usb desktop. Please copy/paste them into a terminal window one at a time, pressing enter after each line.

sudo mount /dev/sda1 /mnt
sudo grub-install --root-directory=/mnt /dev/sda
If these commands run without any error please reboot and see if Ubuntu boots ok.
Quackers,

thanks for your help, I've already tried to reinstall grub and still get the grub prompt. I also did a complete install from my flash drive and nothing still.
Any other ideas?

[Quackers]

I take it that you are using a live usb (the one that is plugged in on the boot script). Has that usb been unplugged since you ran the boot script? What can sometimes happen is that when it is reconnected, it can become sda, rather than sdb. In that case your are effectively re-installing grub to the flash drive, rather than your hard drive. Could you re-run the boot script, but leave the flash drive plugged in (if it still is), thanks.

[railman]

In order for me to do so I would need to boot from grub, I had a list of the commands that I would need for that but have lost it if you could refresh my memory it would be helpfull. I am writing from the laptop at the same time while tring to do this, so that why my replys are not speedy.

[Quackers]

Boot from the flash drive and select "try ubuntu".
When you are getting the grub prompt, is the flash drive plugged in or not plugged in?

[railman]

Quackers,

Ok I just tried this at the grub prompt but did not work

set prefix=(hd0,0) /boot/grub
set root=(hd0,0)
insmod /boot/grub/linux.mod
linux /vmlinuz root=/dev/sda ro
initrd /initrd.img
boot

[railman]

No the flash drive is not plugged in when I get the grub prompt.

[Quackers]

I have never booted from the grub prompt so am unsure. I would say that I'm sure your (hd0,0)'s should be (hd0,1)'s, but as for the rest I can have a mooch about :-)

[wilee-nilee]

Your close this is the correct set of commands using the tab to finish.

Manual boot from grub prompt for grub2
set root=(hd0,X) X=the partition # of OS
linux /boot/vmlinuz(tab=kernel) root=/dev/sdaX
initrd /boot/initrd(tab, then enter)
boot (enter)

You will have to try it Quackers if you ever get stuck it is empowering.:)

[Quackers]

Thanks wilee-nilee for that :-) Fortunately, I've never needed that info, but I'll bookmark it for future reference :-)

[railman]

Ok I will try that and I'll get back in a few minutes.

[wilee-nilee]

Thanks wilee-nilee for that :-) Fortunately, I've never needed that info, but I'll bookmark it for future reference :-)

I got it from the dr I think I forget now. That and a super grub disc will keep you going, when the going gets tough. I had a maverick set up that no matter how many times I reloaded grub all I got was a black screen a couple months back, supergrub to the rescue.:)

[wilee-nilee]

Ok I will try that and I'll get back in a few minutes.

If you tab on the second line and the kernel doesn't popup the first line is wrong, your first one was.
set root=(hd0,0) should have been set root=(hd0,X) X=the partition.

The third line initrd /boot/initrd(tab, then enter) the tab just kicks it to work nothing appears, may work without the tab on this line not sure.

[railman]

Ok I am back, No luck. I did a fdisk -l from the term on the live-usb and i get
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0000910c

Device Boot Start End Blocks Id System
/dev/sda1 * 1 30211 242665472 83 Linux
/dev/sda2 30211 30402 1530881 5 Extended
/dev/sda5 30211 30402 1530880 82 Linux swap / Solaris

Disk /dev/sdb: 2002 MB, 2002779648 bytes
255 heads, 63 sectors/track, 243 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0217934c

Device Boot Start End Blocks Id System
/dev/sdb1 * 1 244 1955808 c W95 FAT32 (LBA)
Partition 1 has different physical/logical endings:
phys=(242, 254, 63) logical=(243, 125, 9)

[wilee-nilee]

You can also try a supergrub disc use the one in the middle.
http://www.supergrubdisk.org/
Once in run in the terminal just to be safe
sudo grub-install /dev/sda
then
sudo update-grub

Your manual login would look like this.
Manual boot from grub prompt for grub2
set root=(hd0,1) X=the partition # of OS
linux /boot/vmlinuz(tab=kernel) root=/dev/sda1
initrd /boot/initrd(tab, then enter)
boot (enter)

So each line needs a enter hit.

[drs305]

Your files seem to be there. Give it one more shot. The first two commands aren't required but won't hurt either:


set prefix=(hd0,1)/boot/grub
set root=(hd0,1)
insmod linux (hd0,1)/boot/grub/linux.mod
linux (hd0,1)/vmlinuz root=/dev/sda1 ro
initrd (hd0,1)/initrd.img
boot

If you get any errors, barring a typo, you can stop...

[Quackers]

Will you re-run the boot script please and post the output in CODE tags. Thanks.

Edit: and have a look one post up :-)

[railman]

ok I am going to try to boot from grub once again, I'll be back

[railman]

back again,

ok now I am getting the grub rescue prompt and error: out of disk.
I did a set and got
prefix=(hd0,msdos1)/boot/grub
root=hd0,msdos1tried to boot into grub but after the second line"insmod linux (hd0,1)/boot/grub/linux.mod" I get "unknown command".
where to now?

[railman]

Quackers,

Here's the boot info

Boot Info Script 0.55 dated February 15th, 2010

============================= Boot Info Summary: ==============================

=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for (,msdos1)/boot/grub.
=> Syslinux is installed in the MBR of /dev/sdb

sda1: __________________________________________________ _______________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda2: __________________________________________________ _______________________

File system: Extended Partition
Boot sector type: -
Boot sector info:

sda5: __________________________________________________ _______________________

File system: swap
Boot sector type: -
Boot sector info:

sdb1: __________________________________________________ _______________________

File system: vfat
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ __________________________________________________ ___

Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders, total 488397168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start End Size Id System

/dev/sda1 * 2,048 485,332,991 485,330,944 83 Linux
/dev/sda2 485,335,038 488,396,799 3,061,762 5 Extended
/dev/sda5 485,335,040 488,396,799 3,061,760 82 Linux swap / Solaris


Drive: sdb ___________________ __________________________________________________ ___

Disk /dev/sdb: 2002 MB, 2002779648 bytes
255 heads, 63 sectors/track, 243 cylinders, total 3911679 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start End Size Id System

/dev/sdb1 * 63 3,911,678 3,911,616 c W95 FAT32 (LBA)


blkid -c /dev/null: __________________________________________________ __________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/ramzswap0 swap
/dev/sda1 32c87942-abec-4e52-938b-45904f626bd8 ext4
/dev/sda2: PTTYPE="dos"
/dev/sda5 53532410-bd22-49d3-bc01-0f1c0061dc65 swap
/dev/sda: PTTYPE="dos"
/dev/sdb1 1407-0B30 vfat PENDRIVE
/dev/sdb: PTTYPE="dos"

============================ "mount | grep ^/dev output: ===========================

Device Mount_Point Type Options

aufs / aufs (rw)
/dev/sdb1 /cdrom vfat (rw,relatime,fmask=0022,dmask=0022,codepage=cp437, iocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 /rofs squashfs (ro,noatime)


=========================== sda1/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}

function load_video {
insmod vbe
insmod vga
}

insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 32c87942-abec-4e52-938b-45904f626bd8
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 32c87942-abec-4e52-938b-45904f626bd8
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 32c87942-abec-4e52-938b-45904f626bd8
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=32c87942-abec-4e52-938b-45904f626bd8 ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 32c87942-abec-4e52-938b-45904f626bd8
echo 'Loading Linux 2.6.35-22-generic ...'
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=32c87942-abec-4e52-938b-45904f626bd8 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 32c87942-abec-4e52-938b-45904f626bd8
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set 32c87942-abec-4e52-938b-45904f626bd8
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###

=============================== sda1/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=32c87942-abec-4e52-938b-45904f626bd8 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=53532410-bd22-49d3-bc01-0f1c0061dc65 none swap sw 0 0

=================== sda1: Location of files loaded by Grub: ===================


146.1GB: boot/grub/core.img
86.4GB: boot/grub/grub.cfg
.5GB: boot/initrd.img-2.6.35-22-generic
.2GB: boot/vmlinuz-2.6.35-22-generic
.5GB: initrd.img
.2GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================

Unknown BootLoader on sdb1

00000000 eb 58 90 53 59 53 4c 49 4e 55 58 00 02 08 20 00 |.X.SYSLINUX... .|
00000010 02 00 00 00 00 f8 00 00 3f 00 ff 00 3f 00 00 00 |........?...?...|
00000020 c0 af 3b 00 e5 0e 00 00 00 00 00 00 02 00 00 00 |..;.............|
00000030 01 00 06 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 80 00 29 30 0b 07 14 4e 4f 20 4e 41 4d 45 20 20 |..)0...NO NAME |
00000050 20 20 46 41 54 33 32 20 20 20 fa fc 31 c9 8e d1 | FAT32 ..1...|
00000060 bc 76 7b 52 06 57 8e c1 b1 26 bf 78 7b f3 a5 8e |.v{R.W...&.x{...|
00000070 d9 bb 78 00 0f b4 37 0f a0 56 20 d2 78 1b 31 c0 |..x...7..V .x.1.|
00000080 b1 06 89 3f 89 47 02 f3 64 a5 8a 0e 18 7c 88 4d |...?.G..d....|.M|
00000090 bc 50 50 50 50 cd 13 eb 4b f6 45 b4 7f 75 25 38 |.PPPP...K.E..u%8|
000000a0 4d b8 74 20 66 3d 21 47 50 54 75 10 80 7d b8 ed |M.t f=!GPTu..}..|
000000b0 75 0a 66 ff 75 ec 66 ff 75 e8 eb 0f 51 51 66 ff |u.f.u.f.u...QQf.|
000000c0 75 bc eb 07 51 51 66 ff 36 1c 7c b4 08 cd 13 72 |u...QQf.6.|....r|
000000d0 13 20 e4 75 0f c1 ea 08 42 89 16 1a 7c 83 e1 3f |. .u....B...|..?|
000000e0 89 0e 18 7c fb bb aa 55 b4 41 8a 16 74 7b cd 13 |...|...U.A..t{..|
000000f0 72 10 81 fb 55 aa 75 0a f6 c1 01 74 05 c6 06 32 |r...U.u....t...2|
00000100 7d 00 66 b8 f2 1d 00 00 66 ba 00 00 00 00 bb 00 |}.f.....f.......|
00000110 7e e8 10 00 66 81 3e 24 7e 34 be f5 72 75 76 ea |~...f.>$~4..ruv.|
00000120 38 7e 00 00 66 03 06 64 7b 66 13 16 68 7b b9 10 |8~..f..d{f..h{..|
00000130 00 eb 2b 66 52 66 50 06 53 6a 01 6a 10 89 e6 66 |..+fRfP.Sj.j...f|
00000140 60 b4 42 e8 7f 00 66 61 8d 64 10 72 01 c3 66 60 |`.B...fa.d.r..f`|
00000150 31 c0 e8 70 00 66 61 e2 da c6 06 32 7d 2b 66 60 |1..p.fa....2}+f`|
00000160 66 0f b7 36 18 7c 66 0f b7 3e 1a 7c 66 f7 f6 31 |f..6.|f..>.|f..1|
00000170 c9 87 ca 66 f7 f7 66 3d ff 03 00 00 77 17 c0 e4 |...f..f=....w...|
00000180 06 41 08 e1 88 c5 88 d6 b8 01 02 e8 37 00 66 61 |.A..........7.fa|
00000190 72 01 c3 e2 c9 31 f6 8e d6 bc 6c 7b 8e de 66 8f |r....1....l{..f.|
000001a0 06 78 00 be cc 7d e8 09 00 31 c0 cd 16 cd 19 f4 |.x...}...1......|
000001b0 eb fd 66 60 ac 20 c0 74 09 b4 0e bb 07 00 cd 10 |..f`. .t........|
000001c0 eb f2 66 61 c3 8a 16 74 7b cd 13 c3 42 6f 6f 74 |..fa...t{...Boot|
000001d0 20 65 72 72 6f 72 0d 0a 00 00 00 00 00 00 00 00 | error..........|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200

[wilee-nilee]

I know when I tried the manual boot it took about 30 tries to get it correct. You might consider the supergrub option, if it is bootable it should get you in.

Is this a western digital HD perchance, some have firmware that can't be removed and basically I believe wont run Linux without the firmware updated and hidden in windows setup.
http://en.community.dell.com/support-forums/laptop/f/3518/p/19242754/19373052.aspx

This may be the culprit hard to say, yours is 250 gigs.

[railman]

I don't remember what drive brand I have installed, But I'll check.
Going to try the supergrub for now, I'll be back.

thanks

[railman]

I don't remember what drive brand I have installed, But I'll check. I replaced the drive about two years ago, so it's not the one that came with the laptop.
Going to try the supergrub for now, I'll be back.

thanks

[wilee-nilee]

I don't remember what drive brand I have installed, But I'll check.
Going to try the supergrub for now, I'll be back.

thanks

Since it ran Lucid it seems unlikely that the HD is the problem but it seemed worth mentioning. The supergrub disc will tell though whether you can get in the way it is set up now.

[railman]

Ok solved the problem installed windbolws and now on to dual boot ubuntu 10.10.
Thanks to all for the help.