dudemanbubba
January 4th, 2011, 04:29 AM
I have been pulling my hair out for hours. I decided to bite the bullet and upgrade to the 10.4 LTS from 8.10. Did a complete fresh install and chose to automatically clean off the drive and install the new system from scratch.
I have three hard drives with the system on the smaller 40GB and the other two drives are 500GB and 2TB.
From what I can tell my problem probably stems from having the older Grub 0.97 on the system on another drive, but I can't seem to figure out how to purge it. When I mount the partitions, there is no /boot folder...
Any help would be appreciated!
The following is the output from the Boot Info Script:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on boot drive #3
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> No boot loader is installed in the MBR of /dev/sdc
=> Syslinux is installed in the MBR of /dev/sdd
sda1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdc1: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdd1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Fat32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 2,048 74,864,639 74,862,592 83 Linux
/dev/sda2 74,866,686 78,163,967 3,297,282 5 Extended
/dev/sda5 74,866,688 78,163,967 3,297,280 82 Linux swap / Solaris
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
16 heads, 63 sectors/track, 969021 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 * 63 976,772,159 976,772,097 7 HPFS/NTFS
Drive: sdc ___________________ __________________________________________________ ___
Disk /dev/sdc: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdc1 63 3,907,024,064 3,907,024,002 83 Linux
Drive: sdd ___________________ __________________________________________________ ___
Disk /dev/sdd: 16.0 GB, 16001269760 bytes
5 heads, 32 sectors/track, 195328 cylinders, total 31252480 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdd1 * 8,064 31,252,479 31,244,416 c W95 FAT32 (LBA)
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89 ext4
/dev/sda2: PTTYPE="dos"
/dev/sda5 0b2c7ba8-a15b-45a6-a62a-a39a228bfc30 swap
/dev/sda: PTTYPE="dos"
/dev/sdb1 7E34ADC934AD84AD ntfs
/dev/sdb: PTTYPE="dos"
/dev/sdc1 b6ac7c38-a867-47ba-a9a6-5fae67f79723 ext3 2 TB Media
/dev/sdc: PTTYPE="dos"
/dev/sdd1 C018-06A3 vfat KINGSTON
/dev/sdd: PTTYPE="dos"
error: /dev/sde: No medium found
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sdd1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,i ocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 /rofs squashfs (ro,noatime)
=========================== sda1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89 ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89
echo 'Loading Linux 2.6.32-24-generic ...'
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-24-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=0b2c7ba8-a15b-45a6-a62a-a39a228bfc30 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sda1: Location of files loaded by Grub: ===================
30.3GB: boot/grub/core.img
21.6GB: boot/grub/grub.cfg
30.3GB: boot/initrd.img-2.6.32-24-generic
30.3GB: boot/vmlinuz-2.6.32-24-generic
30.3GB: initrd.img
30.3GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================
Unknown BootLoader on sda2
00000000 e6 51 12 00 f6 51 12 00 06 52 12 00 16 52 12 00 |.Q...Q...R...R..|
00000010 26 52 12 00 36 52 12 00 46 52 12 00 56 52 12 00 |&R..6R..FR..VR..|
00000020 66 52 12 00 76 52 12 00 86 52 12 00 96 52 12 00 |fR..vR...R...R..|
00000030 a6 52 12 00 b6 52 12 00 c6 52 12 00 d6 52 12 00 |.R...R...R...R..|
00000040 e6 52 12 00 f6 52 12 00 06 53 12 00 16 53 12 00 |.R...R...S...S..|
00000050 90 50 9e 00 36 53 12 00 46 53 12 00 56 53 12 00 |.P..6S..FS..VS..|
00000060 66 53 12 00 76 53 12 00 86 53 12 00 96 53 12 00 |fS..vS...S...S..|
00000070 a6 53 12 00 b6 53 12 00 c6 53 12 00 d6 53 12 00 |.S...S...S...S..|
00000080 e6 53 12 00 f6 53 12 00 06 54 12 00 16 54 12 00 |.S...S...T...T..|
00000090 26 54 12 00 36 54 12 00 46 54 12 00 56 54 12 00 |&T..6T..FT..VT..|
000000a0 66 54 12 00 76 54 12 00 86 54 12 00 96 54 12 00 |fT..vT...T...T..|
000000b0 a6 54 12 00 b6 54 12 00 c6 54 12 00 50 16 a1 00 |.T...T...T..P...|
000000c0 e6 54 12 00 f6 54 12 00 06 55 12 00 16 55 12 00 |.T...T...U...U..|
000000d0 26 55 12 00 36 55 12 00 46 55 12 00 b0 1e 65 00 |&U..6U..FU....e.|
000000e0 66 55 12 00 76 55 12 00 86 55 12 00 96 55 12 00 |fU..vU...U...U..|
000000f0 a6 55 12 00 b6 55 12 00 c6 55 12 00 d6 55 12 00 |.U...U...U...U..|
00000100 e6 55 12 00 f6 55 12 00 06 56 12 00 16 56 12 00 |.U...U...V...V..|
00000110 26 56 12 00 36 56 12 00 46 56 12 00 56 56 12 00 |&V..6V..FV..VV..|
00000120 66 56 12 00 76 56 12 00 86 56 12 00 20 a1 64 00 |fV..vV...V.. .d.|
00000130 a6 56 12 00 b6 56 12 00 c6 56 12 00 d6 56 12 00 |.V...V...V...V..|
00000140 e6 56 12 00 f6 56 12 00 06 57 12 00 16 57 12 00 |.V...V...W...W..|
00000150 26 57 12 00 36 57 12 00 46 57 12 00 56 57 12 00 |&W..6W..FW..VW..|
00000160 66 57 12 00 76 57 12 00 70 78 9e 00 96 57 12 00 |fW..vW..px...W..|
00000170 a6 57 12 00 74 47 1a 00 a0 6d 12 00 70 6d 12 00 |.W..tG...m..pm..|
00000180 c0 6c 12 00 50 6c 12 00 00 00 00 00 00 00 00 00 |.l..Pl..........|
00000190 0e 24 19 00 00 00 00 00 ff ff ff ff 01 00 00 00 |.$..............|
000001a0 80 3e 18 00 f0 44 18 00 90 3e 18 00 00 00 00 00 |.>...D...>......|
000001b0 00 00 00 00 00 00 00 00 01 00 00 00 01 00 00 fe |................|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 50 32 00 00 00 |...........P2...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=======Devices which don't seem to have a corresponding hard drive==============
sde
I have three hard drives with the system on the smaller 40GB and the other two drives are 500GB and 2TB.
From what I can tell my problem probably stems from having the older Grub 0.97 on the system on another drive, but I can't seem to figure out how to purge it. When I mount the partitions, there is no /boot folder...
Any help would be appreciated!
The following is the output from the Boot Info Script:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on boot drive #3
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> No boot loader is installed in the MBR of /dev/sdc
=> Syslinux is installed in the MBR of /dev/sdd
sda1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdb1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdc1: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdd1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Fat32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 2,048 74,864,639 74,862,592 83 Linux
/dev/sda2 74,866,686 78,163,967 3,297,282 5 Extended
/dev/sda5 74,866,688 78,163,967 3,297,280 82 Linux swap / Solaris
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
16 heads, 63 sectors/track, 969021 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 * 63 976,772,159 976,772,097 7 HPFS/NTFS
Drive: sdc ___________________ __________________________________________________ ___
Disk /dev/sdc: 2000.4 GB, 2000398934016 bytes
255 heads, 63 sectors/track, 243201 cylinders, total 3907029168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdc1 63 3,907,024,064 3,907,024,002 83 Linux
Drive: sdd ___________________ __________________________________________________ ___
Disk /dev/sdd: 16.0 GB, 16001269760 bytes
5 heads, 32 sectors/track, 195328 cylinders, total 31252480 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdd1 * 8,064 31,252,479 31,244,416 c W95 FAT32 (LBA)
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89 ext4
/dev/sda2: PTTYPE="dos"
/dev/sda5 0b2c7ba8-a15b-45a6-a62a-a39a228bfc30 swap
/dev/sda: PTTYPE="dos"
/dev/sdb1 7E34ADC934AD84AD ntfs
/dev/sdb: PTTYPE="dos"
/dev/sdc1 b6ac7c38-a867-47ba-a9a6-5fae67f79723 ext3 2 TB Media
/dev/sdc: PTTYPE="dos"
/dev/sdd1 C018-06A3 vfat KINGSTON
/dev/sdd: PTTYPE="dos"
error: /dev/sde: No medium found
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sdd1 /cdrom vfat (ro,noatime,fmask=0022,dmask=0022,codepage=cp437,i ocharset=iso8859-1,shortname=mixed,errors=remount-ro)
/dev/loop0 /rofs squashfs (ro,noatime)
=========================== sda1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89 ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89
echo 'Loading Linux 2.6.32-24-generic ...'
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-24-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda1 during installation
UUID=b1fc945f-b3cb-4ef3-ba2e-24271b2e5a89 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=0b2c7ba8-a15b-45a6-a62a-a39a228bfc30 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sda1: Location of files loaded by Grub: ===================
30.3GB: boot/grub/core.img
21.6GB: boot/grub/grub.cfg
30.3GB: boot/initrd.img-2.6.32-24-generic
30.3GB: boot/vmlinuz-2.6.32-24-generic
30.3GB: initrd.img
30.3GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================
Unknown BootLoader on sda2
00000000 e6 51 12 00 f6 51 12 00 06 52 12 00 16 52 12 00 |.Q...Q...R...R..|
00000010 26 52 12 00 36 52 12 00 46 52 12 00 56 52 12 00 |&R..6R..FR..VR..|
00000020 66 52 12 00 76 52 12 00 86 52 12 00 96 52 12 00 |fR..vR...R...R..|
00000030 a6 52 12 00 b6 52 12 00 c6 52 12 00 d6 52 12 00 |.R...R...R...R..|
00000040 e6 52 12 00 f6 52 12 00 06 53 12 00 16 53 12 00 |.R...R...S...S..|
00000050 90 50 9e 00 36 53 12 00 46 53 12 00 56 53 12 00 |.P..6S..FS..VS..|
00000060 66 53 12 00 76 53 12 00 86 53 12 00 96 53 12 00 |fS..vS...S...S..|
00000070 a6 53 12 00 b6 53 12 00 c6 53 12 00 d6 53 12 00 |.S...S...S...S..|
00000080 e6 53 12 00 f6 53 12 00 06 54 12 00 16 54 12 00 |.S...S...T...T..|
00000090 26 54 12 00 36 54 12 00 46 54 12 00 56 54 12 00 |&T..6T..FT..VT..|
000000a0 66 54 12 00 76 54 12 00 86 54 12 00 96 54 12 00 |fT..vT...T...T..|
000000b0 a6 54 12 00 b6 54 12 00 c6 54 12 00 50 16 a1 00 |.T...T...T..P...|
000000c0 e6 54 12 00 f6 54 12 00 06 55 12 00 16 55 12 00 |.T...T...U...U..|
000000d0 26 55 12 00 36 55 12 00 46 55 12 00 b0 1e 65 00 |&U..6U..FU....e.|
000000e0 66 55 12 00 76 55 12 00 86 55 12 00 96 55 12 00 |fU..vU...U...U..|
000000f0 a6 55 12 00 b6 55 12 00 c6 55 12 00 d6 55 12 00 |.U...U...U...U..|
00000100 e6 55 12 00 f6 55 12 00 06 56 12 00 16 56 12 00 |.U...U...V...V..|
00000110 26 56 12 00 36 56 12 00 46 56 12 00 56 56 12 00 |&V..6V..FV..VV..|
00000120 66 56 12 00 76 56 12 00 86 56 12 00 20 a1 64 00 |fV..vV...V.. .d.|
00000130 a6 56 12 00 b6 56 12 00 c6 56 12 00 d6 56 12 00 |.V...V...V...V..|
00000140 e6 56 12 00 f6 56 12 00 06 57 12 00 16 57 12 00 |.V...V...W...W..|
00000150 26 57 12 00 36 57 12 00 46 57 12 00 56 57 12 00 |&W..6W..FW..VW..|
00000160 66 57 12 00 76 57 12 00 70 78 9e 00 96 57 12 00 |fW..vW..px...W..|
00000170 a6 57 12 00 74 47 1a 00 a0 6d 12 00 70 6d 12 00 |.W..tG...m..pm..|
00000180 c0 6c 12 00 50 6c 12 00 00 00 00 00 00 00 00 00 |.l..Pl..........|
00000190 0e 24 19 00 00 00 00 00 ff ff ff ff 01 00 00 00 |.$..............|
000001a0 80 3e 18 00 f0 44 18 00 90 3e 18 00 00 00 00 00 |.>...D...>......|
000001b0 00 00 00 00 00 00 00 00 01 00 00 00 01 00 00 fe |................|
000001c0 ff ff 82 fe ff ff 02 00 00 00 00 50 32 00 00 00 |...........P2...|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=======Devices which don't seem to have a corresponding hard drive==============
sde