leftys
December 14th, 2010, 06:23 PM
I just installed FreeBSD-8.0 in a partition where I used to have Windows 7(the installation did not harm the MBR). After the setup, I rebooted and logged-in Ubuntu from the Grub menu. I went to /boot/grub/grub.cfg to add an entry for FreeBSD:
menuentry "freebsd 8.0" {
set root=(hd0,2,a)
chainloader +1
}
Rebooted, and to my great surprise the Grub menu wouldn't appear. Only a blinking '_' for a few seconds, and then the computer booted in Ubuntu. So I run
#update-grub to restore grub.cfg to it's previous condition. But the menu would not appear again.
Here is my RESULTS.txt from running boot info script:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #2 for (,msdos2)/boot/grub.
sda1: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda2: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda3: __________________________________________________ _______________________
File system: ufs
Boot sector type: Unknown
Boot sector info:
Mounting failed:
mount: wrong fs type, bad option, bad superblock on /dev/sda3,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 2,046 3,905,535 3,903,490 5 Extended
/dev/sda5 2,048 3,905,535 3,903,488 82 Linux swap / Solaris
/dev/sda2 3,905,536 193,486,859 189,581,324 83 Linux
/dev/sda3 * 193,486,860 234,441,647 40,954,788 a5 FreeBSD
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/sda10 ufs
/dev/sda1: PTTYPE="dos"
/dev/sda2 8335f55f-e323-4dd9-9538-2d540d2386e4 ext4
/dev/sda3 ufs
/dev/sda5 5c5aab13-974c-4769-9277-3b46527685e0 swap
/dev/sda6 ufs
/dev/sda8 ufs
/dev/sda9 ufs
/dev/sda: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda2 / ext4 (rw,errors=remount-ro,commit=0)
=========================== sda2/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 8335f55f-e323-4dd9-9538-2d540d2386e4
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 8335f55f-e323-4dd9-9538-2d540d2386e4
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 8335f55f-e323-4dd9-9538-2d540d2386e4
linux /boot/vmlinuz-2.6.35-23-generic root=UUID=8335f55f-e323-4dd9-9538-2d540d2386e4 ro quiet splash
initrd /boot/initrd.img-2.6.35-23-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 8335f55f-e323-4dd9-9538-2d540d2386e4
echo 'Loading Linux 2.6.35-23-generic ...'
linux /boot/vmlinuz-2.6.35-23-generic root=UUID=8335f55f-e323-4dd9-9538-2d540d2386e4 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-23-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 8335f55f-e323-4dd9-9538-2d540d2386e4
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 8335f55f-e323-4dd9-9538-2d540d2386e4
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=============================== sda2/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda2 during installation
UUID=8335f55f-e323-4dd9-9538-2d540d2386e4 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=5c5aab13-974c-4769-9277-3b46527685e0 none swap sw 0 0
=================== sda2: Location of files loaded by Grub: ===================
23.6GB: boot/grub/core.img
47.3GB: boot/grub/grub.cfg
18.4GB: boot/initrd.img-2.6.35-23-generic
23.7GB: boot/vmlinuz-2.6.35-23-generic
18.4GB: initrd.img
23.7GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================
Unknown BootLoader on sda3
00000000 eb 3c 00 00 00 00 00 00 00 00 00 00 02 00 00 00 |.<..............|
00000010 00 00 00 00 00 00 00 00 12 00 02 00 00 00 00 00 |................|
00000020 00 00 00 00 00 16 1f 66 6a 00 51 50 06 53 31 c0 |.......fj.QP.S1.|
00000030 88 f0 50 6a 10 89 e5 e8 c0 00 8d 66 10 cb fc 31 |..Pj.......f...1|
00000040 c9 8e c1 8e d9 8e d1 bc 00 7c 89 e6 bf 00 07 fe |.........|......|
00000050 c5 f3 a5 be ee 7d 80 fa 80 72 2c b6 01 e8 60 00 |.....}...r,...`.|
00000060 b9 01 00 be be 8d b6 01 80 7c 04 a5 75 07 e3 19 |.........|..u...|
00000070 f6 04 80 75 14 83 c6 10 fe c6 80 fe 05 72 e9 49 |...u.........r.I|
00000080 e3 e1 be a2 7d eb 4b 31 d2 89 16 00 09 b6 10 e8 |....}.K1........|
00000090 2e 00 bb 00 90 8b 77 0a 01 de bf 00 c0 b9 00 ae |......w.........|
000000a0 29 f1 f3 a4 fa 49 74 14 e4 64 a8 02 75 f7 b0 d1 |)....It..d..u...|
000000b0 e6 64 e4 64 a8 02 75 fa b0 df e6 60 fb e9 50 13 |.d.d..u....`..P.|
000000c0 bb 00 8c 8b 44 08 8b 4c 0a 0e e8 5a ff 73 2a be |....D..L...Z.s*.|
000000d0 9d 7d e8 1c 00 be a7 7d e8 16 00 30 e4 cd 16 c7 |.}.....}...0....|
000000e0 06 72 04 34 12 ea 00 00 ff ff bb 07 00 b4 0e cd |.r.4............|
000000f0 10 ac 84 c0 75 f4 b4 01 f9 c3 2e f6 06 b0 08 80 |....u...........|
00000100 74 22 80 fa 80 72 1d bb aa 55 52 b4 41 cd 13 5a |t"...r...UR.A..Z|
00000110 72 12 81 fb 55 aa 75 0c f6 c1 01 74 07 89 ee b4 |r...U.u....t....|
00000120 42 cd 13 c3 52 b4 08 cd 13 88 f5 5a 72 cb 80 e1 |B...R......Zr...|
00000130 3f 74 c3 fa 66 8b 46 08 52 66 0f b6 d9 66 31 d2 |?t..f.F.Rf...f1.|
00000140 66 f7 f3 88 eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a |f......C0.f....Z|
00000150 66 3d ff 03 00 00 fb 77 9d 86 c4 c0 c8 02 08 e8 |f=.....w........|
00000160 40 91 88 fe 28 e0 8a 66 02 38 e0 72 02 b0 01 bf |@...(..f.8.r....|
00000170 05 00 c4 5e 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c |...^.P....[s.Ot.|
00000180 30 e4 cd 13 93 eb eb 0f b6 c3 01 46 08 73 03 ff |0..........F.s..|
00000190 46 0a d0 e3 00 5e 05 28 46 02 77 88 c3 52 65 61 |F....^.(F.w..Rea|
000001a0 64 00 42 6f 6f 74 00 20 65 72 72 6f 72 0d 0a 00 |d.Boot. error...|
000001b0 80 90 90 90 90 90 90 90 90 90 90 90 90 90 00 00 |................|
000001c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 |................|
000001f0 01 00 a5 fe ff ff 00 00 00 00 50 c3 00 00 55 aa |..........P...U.|
00000200
And here are the results of dmesg|tail:
#sudo dmesg | tail
[ 1010.308083] Skipping EDID probe due to cached edid
[ 1010.665115] Skipping EDID probe due to cached edid
[ 1214.828102] Skipping EDID probe due to cached edid
[ 1215.156083] Skipping EDID probe due to cached edid
[ 1798.989239] You didn't specify the type of your ufs filesystem
[ 1798.989241]
[ 1798.989242] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextste p|nextstep-cd|openstep ...
[ 1798.989244]
[ 1798.989245] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[ 1798.989592] ufs_read_super: bad magic number
menuentry "freebsd 8.0" {
set root=(hd0,2,a)
chainloader +1
}
Rebooted, and to my great surprise the Grub menu wouldn't appear. Only a blinking '_' for a few seconds, and then the computer booted in Ubuntu. So I run
#update-grub to restore grub.cfg to it's previous condition. But the menu would not appear again.
Here is my RESULTS.txt from running boot info script:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #2 for (,msdos2)/boot/grub.
sda1: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda2: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda3: __________________________________________________ _______________________
File system: ufs
Boot sector type: Unknown
Boot sector info:
Mounting failed:
mount: wrong fs type, bad option, bad superblock on /dev/sda3,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 2,046 3,905,535 3,903,490 5 Extended
/dev/sda5 2,048 3,905,535 3,903,488 82 Linux swap / Solaris
/dev/sda2 3,905,536 193,486,859 189,581,324 83 Linux
/dev/sda3 * 193,486,860 234,441,647 40,954,788 a5 FreeBSD
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/sda10 ufs
/dev/sda1: PTTYPE="dos"
/dev/sda2 8335f55f-e323-4dd9-9538-2d540d2386e4 ext4
/dev/sda3 ufs
/dev/sda5 5c5aab13-974c-4769-9277-3b46527685e0 swap
/dev/sda6 ufs
/dev/sda8 ufs
/dev/sda9 ufs
/dev/sda: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda2 / ext4 (rw,errors=remount-ro,commit=0)
=========================== sda2/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 8335f55f-e323-4dd9-9538-2d540d2386e4
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 8335f55f-e323-4dd9-9538-2d540d2386e4
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 8335f55f-e323-4dd9-9538-2d540d2386e4
linux /boot/vmlinuz-2.6.35-23-generic root=UUID=8335f55f-e323-4dd9-9538-2d540d2386e4 ro quiet splash
initrd /boot/initrd.img-2.6.35-23-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 8335f55f-e323-4dd9-9538-2d540d2386e4
echo 'Loading Linux 2.6.35-23-generic ...'
linux /boot/vmlinuz-2.6.35-23-generic root=UUID=8335f55f-e323-4dd9-9538-2d540d2386e4 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-23-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 8335f55f-e323-4dd9-9538-2d540d2386e4
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos2)'
search --no-floppy --fs-uuid --set 8335f55f-e323-4dd9-9538-2d540d2386e4
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=============================== sda2/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda2 during installation
UUID=8335f55f-e323-4dd9-9538-2d540d2386e4 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=5c5aab13-974c-4769-9277-3b46527685e0 none swap sw 0 0
=================== sda2: Location of files loaded by Grub: ===================
23.6GB: boot/grub/core.img
47.3GB: boot/grub/grub.cfg
18.4GB: boot/initrd.img-2.6.35-23-generic
23.7GB: boot/vmlinuz-2.6.35-23-generic
18.4GB: initrd.img
23.7GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================
Unknown BootLoader on sda3
00000000 eb 3c 00 00 00 00 00 00 00 00 00 00 02 00 00 00 |.<..............|
00000010 00 00 00 00 00 00 00 00 12 00 02 00 00 00 00 00 |................|
00000020 00 00 00 00 00 16 1f 66 6a 00 51 50 06 53 31 c0 |.......fj.QP.S1.|
00000030 88 f0 50 6a 10 89 e5 e8 c0 00 8d 66 10 cb fc 31 |..Pj.......f...1|
00000040 c9 8e c1 8e d9 8e d1 bc 00 7c 89 e6 bf 00 07 fe |.........|......|
00000050 c5 f3 a5 be ee 7d 80 fa 80 72 2c b6 01 e8 60 00 |.....}...r,...`.|
00000060 b9 01 00 be be 8d b6 01 80 7c 04 a5 75 07 e3 19 |.........|..u...|
00000070 f6 04 80 75 14 83 c6 10 fe c6 80 fe 05 72 e9 49 |...u.........r.I|
00000080 e3 e1 be a2 7d eb 4b 31 d2 89 16 00 09 b6 10 e8 |....}.K1........|
00000090 2e 00 bb 00 90 8b 77 0a 01 de bf 00 c0 b9 00 ae |......w.........|
000000a0 29 f1 f3 a4 fa 49 74 14 e4 64 a8 02 75 f7 b0 d1 |)....It..d..u...|
000000b0 e6 64 e4 64 a8 02 75 fa b0 df e6 60 fb e9 50 13 |.d.d..u....`..P.|
000000c0 bb 00 8c 8b 44 08 8b 4c 0a 0e e8 5a ff 73 2a be |....D..L...Z.s*.|
000000d0 9d 7d e8 1c 00 be a7 7d e8 16 00 30 e4 cd 16 c7 |.}.....}...0....|
000000e0 06 72 04 34 12 ea 00 00 ff ff bb 07 00 b4 0e cd |.r.4............|
000000f0 10 ac 84 c0 75 f4 b4 01 f9 c3 2e f6 06 b0 08 80 |....u...........|
00000100 74 22 80 fa 80 72 1d bb aa 55 52 b4 41 cd 13 5a |t"...r...UR.A..Z|
00000110 72 12 81 fb 55 aa 75 0c f6 c1 01 74 07 89 ee b4 |r...U.u....t....|
00000120 42 cd 13 c3 52 b4 08 cd 13 88 f5 5a 72 cb 80 e1 |B...R......Zr...|
00000130 3f 74 c3 fa 66 8b 46 08 52 66 0f b6 d9 66 31 d2 |?t..f.F.Rf...f1.|
00000140 66 f7 f3 88 eb 88 d5 43 30 d2 66 f7 f3 88 d7 5a |f......C0.f....Z|
00000150 66 3d ff 03 00 00 fb 77 9d 86 c4 c0 c8 02 08 e8 |f=.....w........|
00000160 40 91 88 fe 28 e0 8a 66 02 38 e0 72 02 b0 01 bf |@...(..f.8.r....|
00000170 05 00 c4 5e 04 50 b4 02 cd 13 5b 73 0a 4f 74 1c |...^.P....[s.Ot.|
00000180 30 e4 cd 13 93 eb eb 0f b6 c3 01 46 08 73 03 ff |0..........F.s..|
00000190 46 0a d0 e3 00 5e 05 28 46 02 77 88 c3 52 65 61 |F....^.(F.w..Rea|
000001a0 64 00 42 6f 6f 74 00 20 65 72 72 6f 72 0d 0a 00 |d.Boot. error...|
000001b0 80 90 90 90 90 90 90 90 90 90 90 90 90 90 00 00 |................|
000001c0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 80 00 |................|
000001f0 01 00 a5 fe ff ff 00 00 00 00 50 c3 00 00 55 aa |..........P...U.|
00000200
And here are the results of dmesg|tail:
#sudo dmesg | tail
[ 1010.308083] Skipping EDID probe due to cached edid
[ 1010.665115] Skipping EDID probe due to cached edid
[ 1214.828102] Skipping EDID probe due to cached edid
[ 1215.156083] Skipping EDID probe due to cached edid
[ 1798.989239] You didn't specify the type of your ufs filesystem
[ 1798.989241]
[ 1798.989242] mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextste p|nextstep-cd|openstep ...
[ 1798.989244]
[ 1798.989245] >>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[ 1798.989592] ufs_read_super: bad magic number