lokesh1507
December 12th, 2010, 08:20 PM
hi all,
Is there any buddy who can solve my problem?
My problem is same as written above
Issue:: Unable to
Machine configuration: Toshiba L640-X4310
OS: Release 10.10 (Maverick) kernel linux 2.6.35-23-generic gnome 2.32
Error log:
$sudo apt-get update
installArchives() failed: perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Preconfiguring packages ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Preconfiguring packages ...
(Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 145960 files and directories currently installed.)
Preparing to replace libssl0.9.8 0.9.8o-1ubuntu4.2 (using .../libssl0.9.8_0.9.8o-1ubuntu4.3_i386.deb) ...
Unpacking replacement libssl0.9.8 ...
Setting up libssl0.9.8 (0.9.8o-1ubuntu4.3) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
(Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 145960 files and directories currently installed.)
Preparing to replace libk5crypto3 1.8.1+dfsg-5ubuntu0.1 (using .../libk5crypto3_1.8.1+dfsg-5ubuntu0.2_i386.deb) ...
Unpacking replacement libk5crypto3 ...
Preparing to replace libgssapi-krb5-2 1.8.1+dfsg-5ubuntu0.1 (using .../libgssapi-krb5-2_1.8.1+dfsg-5ubuntu0.2_i386.deb) ...
Unpacking replacement libgssapi-krb5-2 ...
Preparing to replace libkrb5-3 1.8.1+dfsg-5ubuntu0.1 (using .../libkrb5-3_1.8.1+dfsg-5ubuntu0.2_i386.deb) ...
Unpacking replacement libkrb5-3 ...
Preparing to replace libkrb5support0 1.8.1+dfsg-5ubuntu0.1 (using .../libkrb5support0_1.8.1+dfsg-5ubuntu0.2_i386.deb) ...
Unpacking replacement libkrb5support0 ...
Preparing to replace nautilus-sendto-empathy 2.32.0.1-0ubuntu1 (using .../nautilus-sendto-empathy_2.32.1-0ubuntu1_i386.deb) ...
Unpacking replacement nautilus-sendto-empathy ...
Preparing to replace empathy 2.32.0.1-0ubuntu1 (using .../empathy_2.32.1-0ubuntu1_i386.deb) ...
Unpacking replacement empathy ...
Preparing to replace empathy-common 2.32.0.1-0ubuntu1 (using .../empathy-common_2.32.1-0ubuntu1_all.deb) ...
Unpacking replacement empathy-common ...
Preparing to replace libwvstreams4.6-base 4.6.1-1 (using .../libwvstreams4.6-base_4.6.1-1ubuntu1_i386.deb) ...
Unpacking replacement libwvstreams4.6-base ...
Preparing to replace libwvstreams4.6-extras 4.6.1-1 (using .../libwvstreams4.6-extras_4.6.1-1ubuntu1_i386.deb) ...
Unpacking replacement libwvstreams4.6-extras ...
Preparing to replace libuniconf4.6 4.6.1-1 (using .../libuniconf4.6_4.6.1-1ubuntu1_i386.deb) ...
Unpacking replacement libuniconf4.6 ...
Preparing to replace wvdial 1.60.3 (using .../wvdial_1.60.4_i386.deb) ...
Unpacking replacement wvdial ...
Preparing to replace gnome-ppp 0.3.23-1 (using .../gnome-ppp_0.3.23-1ubuntu2_i386.deb) ...
Unpacking replacement gnome-ppp ...
Preparing to replace gwibber 2.32.2-0ubuntu1 (using .../gwibber_2.32.2-0ubuntu2_all.deb) ...
Unpacking replacement gwibber ...
Preparing to replace gwibber-service 2.32.2-0ubuntu1 (using .../gwibber-service_2.32.2-0ubuntu2_all.deb) ...
Unpacking replacement gwibber-service ...
Preparing to replace libibus2 1.3.7-1ubuntu3 (using .../libibus2_1.3.7-1ubuntu4_i386.deb) ...
Unpacking replacement libibus2 ...
Preparing to replace ibus 1.3.7-1ubuntu3 (using .../ibus_1.3.7-1ubuntu4_i386.deb) ...
Unpacking replacement ibus ...
Preparing to replace python-ibus 1.3.7-1ubuntu3 (using .../python-ibus_1.3.7-1ubuntu4_all.deb) ...
Unpacking replacement python-ibus ...
Preparing to replace ibus-gtk 1.3.7-1ubuntu3 (using .../ibus-gtk_1.3.7-1ubuntu4_i386.deb) ...
Unpacking replacement ibus-gtk ...
Preparing to replace libmagickcore3 7:6.6.2.6-1ubuntu1 (using .../libmagickcore3_7%3a6.6.2.6-1ubuntu1.1_i386.deb) ...
Unpacking replacement libmagickcore3 ...
Preparing to replace libmagickwand3 7:6.6.2.6-1ubuntu1 (using .../libmagickwand3_7%3a6.6.2.6-1ubuntu1.1_i386.deb) ...
Unpacking replacement libmagickwand3 ...
Preparing to replace imagemagick 7:6.6.2.6-1ubuntu1 (using .../imagemagick_7%3a6.6.2.6-1ubuntu1.1_i386.deb) ...
Unpacking replacement imagemagick ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Preparing to replace libmagickcore3-extra 7:6.6.2.6-1ubuntu1 (using .../libmagickcore3-extra_7%3a6.6.2.6-1ubuntu1.1_i386.deb) ...
Unpacking replacement libmagickcore3-extra ...
Preparing to replace openssl 0.9.8o-1ubuntu4.2 (using .../openssl_0.9.8o-1ubuntu4.3_i386.deb) ...
Unpacking replacement openssl ...
Preparing to replace software-center 3.0.5 (using .../software-center_3.0.7_all.deb) ...
Unpacking replacement software-center ...
Preparing to replace telepathy-haze 0.4.0-1 (using .../telepathy-haze_0.4.0-1ubuntu0.1_i386.deb) ...
Unpacking replacement telepathy-haze ...
Preparing to replace tomboy 1.4.0-0ubuntu2 (using .../tomboy_1.4.2-0ubuntu1_i386.deb) ...
Unpacking replacement tomboy ...
Preparing to replace xdg-utils 1.0.2+cvs20100307-1 (using .../xdg-utils_1.0.2+cvs20100307-1ubuntu0.1_all.deb) ...
Unpacking replacement xdg-utils ...
Preparing to replace libgexiv2-0 0.2.0-0ubuntu2 (using .../libgexiv2-0_0.2.0-0ubuntu2.1_i386.deb) ...
Unpacking replacement libgexiv2-0 ...
Preparing to replace libx264-98 2:0.98.1653+git88b90d9-3 (using .../libx264-98_2%3a0.98.1653+git88b90d9-3ubuntu1_i386.deb) ...
Unpacking replacement libx264-98 ...
Processing triggers for desktop-file-utils ...
Processing triggers for python-gmenu ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Rebuilding /usr/share/applications/desktop.en_IN.ISO8859-1.cache...
WARNING: System locale is invalid
Processing triggers for libglib2.0-0 ...
Processing triggers for man-db ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
/usr/bin/mandb: can't set the locale; make sure $LC_* and $LANG are correct
Processing triggers for hicolor-icon-theme ...
Processing triggers for gconf2 ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_COLLATE to default locale: No such file or directory
Processing triggers for python-support ...
Processing triggers for libgtk2.0-0 ...
Processing triggers for shared-mime-info ...
Setting up crossplatformui (1.0.3 ...
Rather than invoking init scripts through /etc/init.d, use the service(
utility, e.g. service acpid restart
Since the script you are attempting to invoke has been converted to an
Upstart job, you may also use the restart( utility, e.g. restart acpid
acpid start/running, process 5438
package libqtgui4 exist
QT_VERSION = 4
Sorry! The usb-serial driver does not support your Linux version.
Sorry! Make usb-serial driver error.
But, it try to use the default driver module.
mv: cannot stat `/usr/local/bin/ztemtApp/ztemt.ko': No such file or directory
dpkg: error processing crossplatformui (--configure):
subprocess installed post-installation script returned error exit status 1
Setting up libkrb5support0 (1.8.1+dfsg-5ubuntu0.2) ...
Setting up libk5crypto3 (1.8.1+dfsg-5ubuntu0.2) ...
Setting up libkrb5-3 (1.8.1+dfsg-5ubuntu0.2) ...
Setting up libgssapi-krb5-2 (1.8.1+dfsg-5ubuntu0.2) ...
Setting up empathy-common (2.32.1-0ubuntu1) ...
Setting up nautilus-sendto-empathy (2.32.1-0ubuntu1) ...
Setting up empathy (2.32.1-0ubuntu1) ...
Setting up libwvstreams4.6-base (4.6.1-1ubuntu1) ...
Setting up libwvstreams4.6-extras (4.6.1-1ubuntu1) ...
Setting up libuniconf4.6 (4.6.1-1ubuntu1) ...
Setting up wvdial (1.60.4) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
/etc/wvdial.conf already exists -- not probing your modem.
(Run wvdialconf manually if you want to re-detect your modem.)
Setting up gnome-ppp (0.3.23-1ubuntu2) ...
Setting up gwibber-service (2.32.2-0ubuntu2) ...
Setting up libibus2 (1.3.7-1ubuntu4) ...
Setting up python-ibus (1.3.7-1ubuntu4) ...
Setting up ibus (1.3.7-1ubuntu4) ...
update-alternatives: using /etc/X11/xinit/xinput.d/ibus to provide /etc/X11/xinit/xinput.d/ja_JP (xinput-ja_JP) in auto mode.
update-alternatives: using /etc/X11/xinit/xinput.d/ibus to provide /etc/X11/xinit/xinput.d/ko_KR (xinput-ko_KR) in auto mode.
update-alternatives: using /etc/X11/xinit/xinput.d/ibus to provide /etc/X11/xinit/xinput.d/zh_CN (xinput-zh_CN) in auto mode.
update-alternatives: using /etc/X11/xinit/xinput.d/ibus to provide /etc/X11/xinit/xinput.d/zh_TW (xinput-zh_TW) in auto mode.
update-alternatives: using /etc/X11/xinit/xinput.d/ibus to provide /etc/X11/xinit/xinput.d/zh_HK (xinput-zh_HK) in auto mode.
update-alternatives: using /etc/X11/xinit/xinput.d/ibus to provide /etc/X11/xinit/xinput.d/zh_SG (xinput-zh_SG) in auto mode.
Setting up ibus-gtk (1.3.7-1ubuntu4) ...
Setting up libmagickcore3 (7:6.6.2.6-1ubuntu1.1) ...
Setting up libmagickwand3 (7:6.6.2.6-1ubuntu1.1) ...
Setting up imagemagick (7:6.6.2.6-1ubuntu1.1) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Setting up libmagickcore3-extra (7:6.6.2.6-1ubuntu1.1) ...
Setting up openssl (0.9.8o-1ubuntu4.3) ...
Setting up software-center (3.0.7) ...
(process:5593): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
/usr/lib/pymodules/python2.6/gtk-2.0/gtk/__init__.py:57: GtkWarning: could not open display
warnings.warn(str(e), _gtk.Warning)
WARNING:root:setlocale failed with 'unsupported locale setting'
Setting up telepathy-haze (0.4.0-1ubuntu0.1) ...
Setting up tomboy (1.4.2-0ubuntu1) ...
Setting up xdg-utils (1.0.2+cvs20100307-1ubuntu0.1) ...
Setting up libgexiv2-0 (0.2.0-0ubuntu2.1) ...
Setting up libx264-98 (2:0.98.1653+git88b90d9-3ubuntu1) ...
Processing triggers for python-central ...
Setting up gwibber (2.32.2-0ubuntu2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Processing triggers for python-support ...
Processing triggers for python-central ...
Errors were encountered while processing:
crossplatformui
Setting up crossplatformui (1.0.3 ...
Rather than invoking init scripts through /etc/init.d, use the service(
utility, e.g. service acpid restart
Since the script you are attempting to invoke has been converted to an
Upstart job, you may also use the restart( utility, e.g. restart acpid
acpid start/running, process 5644
package libqtgui4 exist
QT_VERSION = 4
Sorry! The usb-serial driver does not support your Linux version.
Sorry! Make usb-serial driver error.
But, it try to use the default driver module.
mv: cannot stat `/usr/local/bin/ztemtApp/ztemt.ko': No such file or directory
dpkg: error processing crossplatformui (--configure):
subprocess installed post-installation script returned error exit status 1
$sudo apt-get install -f
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up crossplatformui (1.0.38) ...
Rather than invoking init scripts through /etc/init.d, use the service(8)
utility, e.g. service acpid restart
Since the script you are attempting to invoke has been converted to an
Upstart job, you may also use the restart(8) utility, e.g. restart acpid
acpid start/running, process 2208
package libqtgui4 exist
QT_VERSION = 4
Sorry! The usb-serial driver does not support your Linux version.
Sorry! Make usb-serial driver error.
But, it try to use the default driver module.
mv: cannot stat `/usr/local/bin/ztemtApp/ztemt.ko': No such file or directory
dpkg: error processing crossplatformui (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
crossplatformui
E: Sub-process /usr/bin/dpkg returned an error code (1)
$sudo dpkg --configure -a
Setting up crossplatformui (1.0.38) ...
Rather than invoking init scripts through /etc/init.d, use the service(8)
utility, e.g. service acpid restart
Since the script you are attempting to invoke has been converted to an
Upstart job, you may also use the restart(8) utility, e.g. restart acpid
acpid start/running, process 2267
package libqtgui4 exist
QT_VERSION = 4
Sorry! The usb-serial driver does not support your Linux version.
Sorry! Make usb-serial driver error.
But, it try to use the default driver module.
mv: cannot stat `/usr/local/bin/ztemtApp/ztemt.ko': No such file or directory
dpkg: error processing crossplatformui (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
crossplatformui
.................................................. ..........
I do not want to change or upgrade this Maverick.
So please help me out from this issue.
Thanks in advance
Is there any buddy who can solve my problem?
My problem is same as written above
Issue:: Unable to
Machine configuration: Toshiba L640-X4310
OS: Release 10.10 (Maverick) kernel linux 2.6.35-23-generic gnome 2.32
Error log:
$sudo apt-get update
installArchives() failed: perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Preconfiguring packages ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Preconfiguring packages ...
(Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 145960 files and directories currently installed.)
Preparing to replace libssl0.9.8 0.9.8o-1ubuntu4.2 (using .../libssl0.9.8_0.9.8o-1ubuntu4.3_i386.deb) ...
Unpacking replacement libssl0.9.8 ...
Setting up libssl0.9.8 (0.9.8o-1ubuntu4.3) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
(Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 145960 files and directories currently installed.)
Preparing to replace libk5crypto3 1.8.1+dfsg-5ubuntu0.1 (using .../libk5crypto3_1.8.1+dfsg-5ubuntu0.2_i386.deb) ...
Unpacking replacement libk5crypto3 ...
Preparing to replace libgssapi-krb5-2 1.8.1+dfsg-5ubuntu0.1 (using .../libgssapi-krb5-2_1.8.1+dfsg-5ubuntu0.2_i386.deb) ...
Unpacking replacement libgssapi-krb5-2 ...
Preparing to replace libkrb5-3 1.8.1+dfsg-5ubuntu0.1 (using .../libkrb5-3_1.8.1+dfsg-5ubuntu0.2_i386.deb) ...
Unpacking replacement libkrb5-3 ...
Preparing to replace libkrb5support0 1.8.1+dfsg-5ubuntu0.1 (using .../libkrb5support0_1.8.1+dfsg-5ubuntu0.2_i386.deb) ...
Unpacking replacement libkrb5support0 ...
Preparing to replace nautilus-sendto-empathy 2.32.0.1-0ubuntu1 (using .../nautilus-sendto-empathy_2.32.1-0ubuntu1_i386.deb) ...
Unpacking replacement nautilus-sendto-empathy ...
Preparing to replace empathy 2.32.0.1-0ubuntu1 (using .../empathy_2.32.1-0ubuntu1_i386.deb) ...
Unpacking replacement empathy ...
Preparing to replace empathy-common 2.32.0.1-0ubuntu1 (using .../empathy-common_2.32.1-0ubuntu1_all.deb) ...
Unpacking replacement empathy-common ...
Preparing to replace libwvstreams4.6-base 4.6.1-1 (using .../libwvstreams4.6-base_4.6.1-1ubuntu1_i386.deb) ...
Unpacking replacement libwvstreams4.6-base ...
Preparing to replace libwvstreams4.6-extras 4.6.1-1 (using .../libwvstreams4.6-extras_4.6.1-1ubuntu1_i386.deb) ...
Unpacking replacement libwvstreams4.6-extras ...
Preparing to replace libuniconf4.6 4.6.1-1 (using .../libuniconf4.6_4.6.1-1ubuntu1_i386.deb) ...
Unpacking replacement libuniconf4.6 ...
Preparing to replace wvdial 1.60.3 (using .../wvdial_1.60.4_i386.deb) ...
Unpacking replacement wvdial ...
Preparing to replace gnome-ppp 0.3.23-1 (using .../gnome-ppp_0.3.23-1ubuntu2_i386.deb) ...
Unpacking replacement gnome-ppp ...
Preparing to replace gwibber 2.32.2-0ubuntu1 (using .../gwibber_2.32.2-0ubuntu2_all.deb) ...
Unpacking replacement gwibber ...
Preparing to replace gwibber-service 2.32.2-0ubuntu1 (using .../gwibber-service_2.32.2-0ubuntu2_all.deb) ...
Unpacking replacement gwibber-service ...
Preparing to replace libibus2 1.3.7-1ubuntu3 (using .../libibus2_1.3.7-1ubuntu4_i386.deb) ...
Unpacking replacement libibus2 ...
Preparing to replace ibus 1.3.7-1ubuntu3 (using .../ibus_1.3.7-1ubuntu4_i386.deb) ...
Unpacking replacement ibus ...
Preparing to replace python-ibus 1.3.7-1ubuntu3 (using .../python-ibus_1.3.7-1ubuntu4_all.deb) ...
Unpacking replacement python-ibus ...
Preparing to replace ibus-gtk 1.3.7-1ubuntu3 (using .../ibus-gtk_1.3.7-1ubuntu4_i386.deb) ...
Unpacking replacement ibus-gtk ...
Preparing to replace libmagickcore3 7:6.6.2.6-1ubuntu1 (using .../libmagickcore3_7%3a6.6.2.6-1ubuntu1.1_i386.deb) ...
Unpacking replacement libmagickcore3 ...
Preparing to replace libmagickwand3 7:6.6.2.6-1ubuntu1 (using .../libmagickwand3_7%3a6.6.2.6-1ubuntu1.1_i386.deb) ...
Unpacking replacement libmagickwand3 ...
Preparing to replace imagemagick 7:6.6.2.6-1ubuntu1 (using .../imagemagick_7%3a6.6.2.6-1ubuntu1.1_i386.deb) ...
Unpacking replacement imagemagick ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Preparing to replace libmagickcore3-extra 7:6.6.2.6-1ubuntu1 (using .../libmagickcore3-extra_7%3a6.6.2.6-1ubuntu1.1_i386.deb) ...
Unpacking replacement libmagickcore3-extra ...
Preparing to replace openssl 0.9.8o-1ubuntu4.2 (using .../openssl_0.9.8o-1ubuntu4.3_i386.deb) ...
Unpacking replacement openssl ...
Preparing to replace software-center 3.0.5 (using .../software-center_3.0.7_all.deb) ...
Unpacking replacement software-center ...
Preparing to replace telepathy-haze 0.4.0-1 (using .../telepathy-haze_0.4.0-1ubuntu0.1_i386.deb) ...
Unpacking replacement telepathy-haze ...
Preparing to replace tomboy 1.4.0-0ubuntu2 (using .../tomboy_1.4.2-0ubuntu1_i386.deb) ...
Unpacking replacement tomboy ...
Preparing to replace xdg-utils 1.0.2+cvs20100307-1 (using .../xdg-utils_1.0.2+cvs20100307-1ubuntu0.1_all.deb) ...
Unpacking replacement xdg-utils ...
Preparing to replace libgexiv2-0 0.2.0-0ubuntu2 (using .../libgexiv2-0_0.2.0-0ubuntu2.1_i386.deb) ...
Unpacking replacement libgexiv2-0 ...
Preparing to replace libx264-98 2:0.98.1653+git88b90d9-3 (using .../libx264-98_2%3a0.98.1653+git88b90d9-3ubuntu1_i386.deb) ...
Unpacking replacement libx264-98 ...
Processing triggers for desktop-file-utils ...
Processing triggers for python-gmenu ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
Rebuilding /usr/share/applications/desktop.en_IN.ISO8859-1.cache...
WARNING: System locale is invalid
Processing triggers for libglib2.0-0 ...
Processing triggers for man-db ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
/usr/bin/mandb: can't set the locale; make sure $LC_* and $LANG are correct
Processing triggers for hicolor-icon-theme ...
Processing triggers for gconf2 ...
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_COLLATE to default locale: No such file or directory
Processing triggers for python-support ...
Processing triggers for libgtk2.0-0 ...
Processing triggers for shared-mime-info ...
Setting up crossplatformui (1.0.3 ...
Rather than invoking init scripts through /etc/init.d, use the service(
utility, e.g. service acpid restart
Since the script you are attempting to invoke has been converted to an
Upstart job, you may also use the restart( utility, e.g. restart acpid
acpid start/running, process 5438
package libqtgui4 exist
QT_VERSION = 4
Sorry! The usb-serial driver does not support your Linux version.
Sorry! Make usb-serial driver error.
But, it try to use the default driver module.
mv: cannot stat `/usr/local/bin/ztemtApp/ztemt.ko': No such file or directory
dpkg: error processing crossplatformui (--configure):
subprocess installed post-installation script returned error exit status 1
Setting up libkrb5support0 (1.8.1+dfsg-5ubuntu0.2) ...
Setting up libk5crypto3 (1.8.1+dfsg-5ubuntu0.2) ...
Setting up libkrb5-3 (1.8.1+dfsg-5ubuntu0.2) ...
Setting up libgssapi-krb5-2 (1.8.1+dfsg-5ubuntu0.2) ...
Setting up empathy-common (2.32.1-0ubuntu1) ...
Setting up nautilus-sendto-empathy (2.32.1-0ubuntu1) ...
Setting up empathy (2.32.1-0ubuntu1) ...
Setting up libwvstreams4.6-base (4.6.1-1ubuntu1) ...
Setting up libwvstreams4.6-extras (4.6.1-1ubuntu1) ...
Setting up libuniconf4.6 (4.6.1-1ubuntu1) ...
Setting up wvdial (1.60.4) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
/etc/wvdial.conf already exists -- not probing your modem.
(Run wvdialconf manually if you want to re-detect your modem.)
Setting up gnome-ppp (0.3.23-1ubuntu2) ...
Setting up gwibber-service (2.32.2-0ubuntu2) ...
Setting up libibus2 (1.3.7-1ubuntu4) ...
Setting up python-ibus (1.3.7-1ubuntu4) ...
Setting up ibus (1.3.7-1ubuntu4) ...
update-alternatives: using /etc/X11/xinit/xinput.d/ibus to provide /etc/X11/xinit/xinput.d/ja_JP (xinput-ja_JP) in auto mode.
update-alternatives: using /etc/X11/xinit/xinput.d/ibus to provide /etc/X11/xinit/xinput.d/ko_KR (xinput-ko_KR) in auto mode.
update-alternatives: using /etc/X11/xinit/xinput.d/ibus to provide /etc/X11/xinit/xinput.d/zh_CN (xinput-zh_CN) in auto mode.
update-alternatives: using /etc/X11/xinit/xinput.d/ibus to provide /etc/X11/xinit/xinput.d/zh_TW (xinput-zh_TW) in auto mode.
update-alternatives: using /etc/X11/xinit/xinput.d/ibus to provide /etc/X11/xinit/xinput.d/zh_HK (xinput-zh_HK) in auto mode.
update-alternatives: using /etc/X11/xinit/xinput.d/ibus to provide /etc/X11/xinit/xinput.d/zh_SG (xinput-zh_SG) in auto mode.
Setting up ibus-gtk (1.3.7-1ubuntu4) ...
Setting up libmagickcore3 (7:6.6.2.6-1ubuntu1.1) ...
Setting up libmagickwand3 (7:6.6.2.6-1ubuntu1.1) ...
Setting up imagemagick (7:6.6.2.6-1ubuntu1.1) ...
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "en_IN.ISO8859-1"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Setting up libmagickcore3-extra (7:6.6.2.6-1ubuntu1.1) ...
Setting up openssl (0.9.8o-1ubuntu4.3) ...
Setting up software-center (3.0.7) ...
(process:5593): Gtk-WARNING **: Locale not supported by C library.
Using the fallback 'C' locale.
/usr/lib/pymodules/python2.6/gtk-2.0/gtk/__init__.py:57: GtkWarning: could not open display
warnings.warn(str(e), _gtk.Warning)
WARNING:root:setlocale failed with 'unsupported locale setting'
Setting up telepathy-haze (0.4.0-1ubuntu0.1) ...
Setting up tomboy (1.4.2-0ubuntu1) ...
Setting up xdg-utils (1.0.2+cvs20100307-1ubuntu0.1) ...
Setting up libgexiv2-0 (0.2.0-0ubuntu2.1) ...
Setting up libx264-98 (2:0.98.1653+git88b90d9-3ubuntu1) ...
Processing triggers for python-central ...
Setting up gwibber (2.32.2-0ubuntu2) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
Processing triggers for python-support ...
Processing triggers for python-central ...
Errors were encountered while processing:
crossplatformui
Setting up crossplatformui (1.0.3 ...
Rather than invoking init scripts through /etc/init.d, use the service(
utility, e.g. service acpid restart
Since the script you are attempting to invoke has been converted to an
Upstart job, you may also use the restart( utility, e.g. restart acpid
acpid start/running, process 5644
package libqtgui4 exist
QT_VERSION = 4
Sorry! The usb-serial driver does not support your Linux version.
Sorry! Make usb-serial driver error.
But, it try to use the default driver module.
mv: cannot stat `/usr/local/bin/ztemtApp/ztemt.ko': No such file or directory
dpkg: error processing crossplatformui (--configure):
subprocess installed post-installation script returned error exit status 1
$sudo apt-get install -f
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
1 not fully installed or removed.
After this operation, 0B of additional disk space will be used.
Setting up crossplatformui (1.0.38) ...
Rather than invoking init scripts through /etc/init.d, use the service(8)
utility, e.g. service acpid restart
Since the script you are attempting to invoke has been converted to an
Upstart job, you may also use the restart(8) utility, e.g. restart acpid
acpid start/running, process 2208
package libqtgui4 exist
QT_VERSION = 4
Sorry! The usb-serial driver does not support your Linux version.
Sorry! Make usb-serial driver error.
But, it try to use the default driver module.
mv: cannot stat `/usr/local/bin/ztemtApp/ztemt.ko': No such file or directory
dpkg: error processing crossplatformui (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
crossplatformui
E: Sub-process /usr/bin/dpkg returned an error code (1)
$sudo dpkg --configure -a
Setting up crossplatformui (1.0.38) ...
Rather than invoking init scripts through /etc/init.d, use the service(8)
utility, e.g. service acpid restart
Since the script you are attempting to invoke has been converted to an
Upstart job, you may also use the restart(8) utility, e.g. restart acpid
acpid start/running, process 2267
package libqtgui4 exist
QT_VERSION = 4
Sorry! The usb-serial driver does not support your Linux version.
Sorry! Make usb-serial driver error.
But, it try to use the default driver module.
mv: cannot stat `/usr/local/bin/ztemtApp/ztemt.ko': No such file or directory
dpkg: error processing crossplatformui (--configure):
subprocess installed post-installation script returned error exit status 1
Errors were encountered while processing:
crossplatformui
.................................................. ..........
I do not want to change or upgrade this Maverick.
So please help me out from this issue.
Thanks in advance