For those concerned:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for (,msdos1)/boot/grub.
=> Lilo is installed in the MBR of /dev/sdb
=> Grub 2 is installed in the MBR of /dev/sdc and looks on the same drive in
partition #3 for (,msdos3)/boot/grub.
sda1: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs: /boot/grub/core.img
sdb1: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb2: __________________________________________________ _______________________
File system: vfat
Boot sector type: -
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdc1: __________________________________________________ _______________________
File system: ext3
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sdc1 and
looks at sector 377063 of the same hard drive for
core.img, but core.img can not be found at this
location.
Operating System:
Boot files/dirs: /grub/grub.cfg /grub/core.img
sdc2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdc5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdc3: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /etc/fstab /boot/grub/core.img
sdc4: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 976,768,064 976,768,002 83 Linux
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 203.9 GB, 203928109056 bytes
255 heads, 63 sectors/track, 24792 cylinders, total 398297088 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 63 204,796,619 204,796,557 83 Linux
/dev/sdb2 204,796,620 398,283,479 193,486,860 b W95 FAT32
Drive: sdc ___________________ __________________________________________________ ___
Disk /dev/sdc: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdc1 * 63 2,040,254 2,040,192 83 Linux
/dev/sdc2 384,708,616 390,716,864 6,008,249 5 Extended
/dev/sdc5 384,708,618 390,716,864 6,008,247 82 Linux swap / Solaris
/dev/sdc3 2,040,255 83,955,689 81,915,435 83 Linux
/dev/sdc4 83,955,690 384,708,554 300,752,865 83 Linux
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 403e1522-05cc-4cd7-9d16-0a00e8b2409b ext3 magnum
/dev/sda: PTTYPE="dos"
/dev/sdb1 a138972b-a839-4285-b048-77660796538f ext3 supersize
/dev/sdb2 D6F8-0339 vfat
/dev/sdb: PTTYPE="dos"
/dev/sdc1 c3111ca5-13cc-4042-bcc4-9a31aef7622c ext3
/dev/sdc2: PTTYPE="dos"
/dev/sdc3 94e510c4-b762-460f-9a65-27e68887966d ext3
/dev/sdc4 6aca9cac-5354-4183-bf88-68e9e62bed9a ext3
/dev/sdc5 fad2fdc5-26da-4080-ba6b-048f80f7cec9 swap
/dev/sdc: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
=================== sda1: Location of files loaded by Grub: ===================
441.3GB: boot/grub/core.img
============================= sdc1/grub/grub.cfg: =============================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos3)'
search --no-floppy --fs-uuid --set 94e510c4-b762-460f-9a65-27e68887966d
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set c3111ca5-13cc-4042-bcc4-9a31aef7622c
set locale_dir=($root)/grub/locale
set lang=en
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set c3111ca5-13cc-4042-bcc4-9a31aef7622c
linux /vmlinuz-2.6.35-22-generic root=UUID=94e510c4-b762-460f-9a65-27e68887966d ro quiet splash
initrd /initrd.img-2.6.35-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set c3111ca5-13cc-4042-bcc4-9a31aef7622c
echo 'Loading Linux 2.6.35-22-generic ...'
linux /vmlinuz-2.6.35-22-generic root=UUID=94e510c4-b762-460f-9a65-27e68887966d ro single
echo 'Loading initial ramdisk ...'
initrd /initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set c3111ca5-13cc-4042-bcc4-9a31aef7622c
linux16 /memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set c3111ca5-13cc-4042-bcc4-9a31aef7622c
linux16 /memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ "x${timeout}" != "x-1" ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=================== sdc1: Location of files loaded by Grub: ===================
.1GB: grub/core.img
.2GB: grub/grub.cfg
.0GB: initrd.img-2.6.35-22-generic
.1GB: vmlinuz-2.6.35-22-generic
=============================== sdc3/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdc3 during installation
/dev/sdc3 / ext3 errors=remount-ro 0 1
# /boot was on /dev/sdc1 during installation
/dev/sdc1 /boot ext3 defaults 0 2
# /home was on /dev/sdc4 during installation
/dev/sdc4 /home ext3 defaults 0 2
# /media/backup was on /dev/sdb2 during installation
/dev/sdb2 /media/backup vfat utf8,umask=007,gid=46 0 1
# /media/bigbastard was on /dev/sda1 during installation
/dev/sda1 /media/bigbastard ext3 defaults 0 2
# /media/supersize was on /dev/sdb1 during installation
/dev/sdb1/media/supersize ext3 defaults 0 2
# swap was on /dev/sdc5 during installation
UUID=fad2fdc5-26da-4080-ba6b-048f80f7cec9 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sdc3: Location of files loaded by Grub: ===================
10.9GB: boot/grub/core.img