Upgrade 10.04 boot failed

[JVJB]

I just got back from being away from my desktop for a few months and decided to upgrade to 10.04 from the gui. After the update was done I rebooted and got stuck at the "Starting Up" message. Tried Recovery mode and got an error, I typed it out below. I'm downloading the liveCD now to boot off of it, but I still don't know how to mount the drives. I do know that I have two HDD's in software raid using madam? or something, can't remember it was a while ago i set it up. Any help appreciate. thanks



Error:
6.892513 Slow work thread pool: Ready
6.893035 CIFS: unknown mount option umask
6.912554 CIFS VFS: Error connecting to socket. Aborting operation
6.912632 CIFS VFS: cifs_mount failed w/return code = -101



update: Downloaded the liveCD and booted off it and ran the bootinfoscript I found referred to in the forum, but I can't see my drive, nautalis shows it as an Array but won't mount it.




Boot Info Script 0.55 dated February 15th, 2010

============================= Boot Info Summary: ==============================

=> Grub 0.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on the same drive
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.

sda1: __________________________________________________ _______________________

File system: linux_raid_member
Boot sector type: -
Boot sector info:

sda2: __________________________________________________ _______________________

File system: linux_raid_member
Boot sector type: -
Boot sector info:

sdb1: __________________________________________________ _______________________

File system: linux_raid_member
Boot sector type: -
Boot sector info:

sdb2: __________________________________________________ _______________________

File system: linux_raid_member
Boot sector type: -
Boot sector info:

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ __________________________________________________ ___

Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start End Size Id System

/dev/sda1 * 63 152,296,199 152,296,137 fd Linux raid autodetect
/dev/sda2 152,296,200 156,296,384 4,000,185 fd Linux raid autodetect


Drive: sdb ___________________ __________________________________________________ ___

Disk /dev/sdb: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start End Size Id System

/dev/sdb1 * 63 152,296,199 152,296,137 fd Linux raid autodetect
/dev/sdb2 152,296,200 156,296,384 4,000,185 fd Linux raid autodetect


blkid -c /dev/null: __________________________________________________ __________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/ramzswap0 swap
/dev/sda1 11d8d5e1-b1b0-4f47-4e52-158d2518e6c8 linux_raid_member
/dev/sda2 e51cd4b1-4f60-79d4-2f94-ab831eef8549 linux_raid_member
/dev/sda: PTTYPE="dos"
/dev/sdb1 11d8d5e1-b1b0-4f47-4e52-158d2518e6c8 linux_raid_member
/dev/sdb2 e51cd4b1-4f60-79d4-2f94-ab831eef8549 linux_raid_member
/dev/sdb: PTTYPE="dos"

============================ "mount | grep ^/dev output: ===========================

Device Mount_Point Type Options

aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)