hrlinux
November 28th, 2010, 11:57 PM
i have dual boot computer win7 and 10.04 ubuntu.
i installed the ubuntu inside the win7
now i have problem that GRUB prompt out every reboot.
i could get into system by type this(but GRUB come back after reboot)
set root=(hd0,1)
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /vmlinuz root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /initrd.img
boot
i also run the Boot Info Script,please help me
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/wubildr.mbr /ubuntu/winboot/wubildr.mbr /wubildr
/ubuntu/winboot/wubildr /ubuntu/disks/root.disk
/ubuntu/disks/swap.disk
sda1/Wubi: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /bootmgr /boot/bcd
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 947,112,074 947,112,012 7 HPFS/NTFS
/dev/sda3 947,112,075 976,768,064 29,655,990 7 HPFS/NTFS
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 6790a31d-73f4-4f36-8208-ef9930cb06a3 ext4
/dev/sda1 BE4C68FE4C68B337 ntfs
/dev/sda3 949CA48C9CA46A86 ntfs FACTORY_IMAGE
/dev/sda: PTTYPE="dos"
error: /dev/sdb: No medium found
error: /dev/sdc: No medium found
error: /dev/sdd: No medium found
error: /dev/sde: No medium found
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/loop0 / ext4 (rw,errors=remount-ro)
/dev/sda1 /host fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,all ow_other,blksize=4096)
======================== sda1/Wubi/boot/grub/grub.cfg: ========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.32-25-generic" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-25-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.32-25-generic
}
menuentry "Ubuntu, Linux 2.6.32-25-generic (recovery mode)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-25-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.32-25-generic
}
menuentry "Ubuntu, Linux 2.6.32-24-generic" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-24-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry "Ubuntu, Linux 2.6.32-24-generic (recovery mode)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-24-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-14-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-14-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
chainloader +1
}
menuentry "Windows Vista (loader) (on /dev/sda3)" {
insmod ntfs
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 949ca48c9ca46a86
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
============================= sda1/Wubi/etc/fstab: =============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
================= sda1/Wubi: Location of files loaded by Grub: =================
6.2GB: boot/grub/grub.cfg
1.0GB: boot/initrd.img-2.6.31-14-generic
1.0GB: boot/initrd.img-2.6.32-24-generic
.7GB: boot/initrd.img-2.6.32-25-generic
.5GB: boot/vmlinuz-2.6.31-14-generic
.7GB: boot/vmlinuz-2.6.32-24-generic
.4GB: boot/vmlinuz-2.6.32-25-generic
.7GB: initrd.img
1.0GB: initrd.img.old
.4GB: vmlinuz
.7GB: vmlinuz.old
=======Devices which don't seem to have a corresponding hard drive==============
sdb sdc sdd sde
i installed the ubuntu inside the win7
now i have problem that GRUB prompt out every reboot.
i could get into system by type this(but GRUB come back after reboot)
set root=(hd0,1)
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /vmlinuz root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /initrd.img
boot
i also run the Boot Info Script,please help me
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/wubildr.mbr /ubuntu/winboot/wubildr.mbr /wubildr
/ubuntu/winboot/wubildr /ubuntu/disks/root.disk
/ubuntu/disks/swap.disk
sda1/Wubi: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab
sda3: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /bootmgr /boot/bcd
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 947,112,074 947,112,012 7 HPFS/NTFS
/dev/sda3 947,112,075 976,768,064 29,655,990 7 HPFS/NTFS
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 6790a31d-73f4-4f36-8208-ef9930cb06a3 ext4
/dev/sda1 BE4C68FE4C68B337 ntfs
/dev/sda3 949CA48C9CA46A86 ntfs FACTORY_IMAGE
/dev/sda: PTTYPE="dos"
error: /dev/sdb: No medium found
error: /dev/sdc: No medium found
error: /dev/sdd: No medium found
error: /dev/sde: No medium found
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/loop0 / ext4 (rw,errors=remount-ro)
/dev/sda1 /host fuseblk (rw,nosuid,nodev,relatime,user_id=0,group_id=0,all ow_other,blksize=4096)
======================== sda1/Wubi/boot/grub/grub.cfg: ========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.32-25-generic" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-25-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.32-25-generic
}
menuentry "Ubuntu, Linux 2.6.32-25-generic (recovery mode)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-25-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.32-25-generic
}
menuentry "Ubuntu, Linux 2.6.32-24-generic" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-24-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry "Ubuntu, Linux 2.6.32-24-generic (recovery mode)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-24-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-14-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-14-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set be4c68fe4c68b337
chainloader +1
}
menuentry "Windows Vista (loader) (on /dev/sda3)" {
insmod ntfs
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 949ca48c9ca46a86
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
============================= sda1/Wubi/etc/fstab: =============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
================= sda1/Wubi: Location of files loaded by Grub: =================
6.2GB: boot/grub/grub.cfg
1.0GB: boot/initrd.img-2.6.31-14-generic
1.0GB: boot/initrd.img-2.6.32-24-generic
.7GB: boot/initrd.img-2.6.32-25-generic
.5GB: boot/vmlinuz-2.6.31-14-generic
.7GB: boot/vmlinuz-2.6.32-24-generic
.4GB: boot/vmlinuz-2.6.32-25-generic
.7GB: initrd.img
1.0GB: initrd.img.old
.4GB: vmlinuz
.7GB: vmlinuz.old
=======Devices which don't seem to have a corresponding hard drive==============
sdb sdc sdd sde