nkrishna
November 19th, 2010, 10:43 AM
First off, Hi all. I am new to Ubuntu Forums. Sorry if this has been asked before, but I am unable to get a display on my TV, nor am I able to get a command prompt on the serial port :-) Help please...
Texas Instruments X-Loader 1.4.4ss (Sep 22 2010 - 16:12:19)
Beagle Rev Ax/Bx
Reading boot sector
Loading u-boot.bin from mmc
U-Boot 2010.03-dirty (Oct 18 2010 - 11:31:58)
OMAP3530-GP ES2.1, CPU-OPP2, L3-165MHz, Max clock-600Mhz
OMAP3 Beagle board + LPDDR/NAND
I2C: ready
DRAM: 128 MB
NAND: 256 MiB
*** Warning - bad CRC or NAND, using default environment
In: serial
Out: serial
Err: serial
Probing for expansion boards, if none are connected you'll see a harmless I2C e.
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_pin: I2C_STAT=0
I2C read: I/O error
Unrecognized expansion board: 0
Beagle Rev Ax/Bx
Die ID #1364000200000000040316e80701601c
Hit any key to stop autoboot: 0
mmc1 is available
The user button is currently NOT pressed.
reading boot.scr
679 bytes read
Running bootscript from mmc ...
## Executing script at 80200000
Debug: Demo Image Install
mmc1 is available
reading uImage
4098772 bytes read
reading uInitrd
4215860 bytes read
## Booting kernel from Legacy Image at 80300000 ...
Image Name: 2.6.35.8-l7
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4098708 Bytes = 3.9 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
Image Name: initramfs
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 4215796 Bytes = 4 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35.8-l7 (root@beagle-256mb-0) (gcc version 4.40
[ 0.000000] CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction ce
[ 0.000000] Machine: OMAP3 Beagle Board
[ 0.000000] Beagle expansionboard: unknown
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3430/3530 ES2.1 (l2cache iva sgx neon isp )
[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
[ 0.000000] Kernel command line: console=ttyS2,115200n8 console=tty0 root=/d0
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] allocated 655360 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memos
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 97452k/97452k available, 33620k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0049000 ( 260 kB)
[ 0.000000] .text : 0xc0049000 - 0xc078f000 (7448 kB)
[ 0.000000] .data : 0xc07fe000 - 0xc085d8c0 ( 383 kB)
[ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, N1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:402
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[ 0.000000] omap_hwmod: l3_hwmod: cannot be enabled (3)
[ 0.000000] omap_hwmod: l4_core_hwmod: cannot be enabled (3)
[ 0.000000] omap_hwmod: l4_per_hwmod: cannot be enabled (3)
[ 0.000000] omap_hwmod: l4_wkup_hwmod: cannot be enabled (3)
[ 0.000000] Reprogramming SDRC clock to 332000000 Hz
[ 0.000000] GPMC revision 5.0
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrups
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000000] Calibrating delay loop... 471.61 BogoMIPS (lpj=1843200)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] Security Framework initialized
[ 0.000000] Smack: Initializing.
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] Initializing cgroup subsys ns
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Initializing cgroup subsys memory
[ 0.000000] Initializing cgroup subsys devices
[ 0.000000] Initializing cgroup subsys freezer
[ 0.000000] CPU: Testing write buffer coherency: ok
[ 0.000000] devtmpfs: initialized
[ 0.000000] regulator: core version 0.5
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] OMAP3 Beagle Rev: Ax/Bx
[ 0.000000] Found NAND on CS0
[ 0.000000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 countee
[ 0.000000] Switched to new clocking rate (Crystal/Core/MPU): 26.0/600/332 Mz
[ 0.000213] OMAP DMA hardware revision 4.0
[ 0.000610] omap-mcpdm omap-mcpdm: unable to get pdm_ck: -2
[ 0.000701] omap-mcpdm: probe of omap-mcpdm failed with error -2
[ 0.006225] bio: create slab <bio-0> at 0
[ 0.007415] SCSI subsystem initialized
[ 0.008666] usbcore: registered new interface driver usbfs
[ 0.008789] usbcore: registered new interface driver hub
[ 0.009063] usbcore: registered new device driver usb
[ 0.009460] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
[ 0.012207] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.012298] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.012786] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.016296] regulator: VUSB1V5: 1500 mV normal standby
[ 0.016632] regulator: VUSB1V8: 1800 mV normal standby
[ 0.016998] regulator: VUSB3V1: 3100 mV normal standby
[ 0.018524] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.019165] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
[ 0.019531] regulator: VDAC: 1800 mV normal standby
[ 0.019927] regulator: VPLL2: 1800 mV normal standby
[ 0.020416] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
[ 0.020690] i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
[ 0.029357] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz
[ 0.030303] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.030883] NetLabel: Initializing
[ 0.030914] NetLabel: domain hash size = 128
[ 0.030944] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.031036] NetLabel: unlabeled traffic allowed by default
[ 0.031127] Switching to clocksource 32k_counter
[ 0.054840] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[ 0.060424] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using D2
[ 0.060821] NET: Registered protocol family 2
[ 0.061126] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.062072] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.062225] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.062316] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.062347] TCP reno registered
[ 0.062377] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.062530] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.062805] NET: Registered protocol family 1
[ 0.063293] RPC: Registered udp transport module.
[ 0.063354] RPC: Registered tcp transport module.
[ 0.063385] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.063720] Trying to unpack rootfs image as initramfs...
[ 0.507812] Freeing initrd memory: 4116K
[ 0.508819] PMU: registered new PMU device of type 0
[ 0.508941] dspbridge_init: 600000 bytes @ 82700000
[ 0.509582] audit: initializing netlink socket (disabled)
[ 0.509704] type=2000 audit(0.890:1): initialized
[ 0.660430] VFS: Disk quotas dquot_6.5.2
[ 0.660858] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.666595] fuse init (API version 7.14)
[ 0.668518] Btrfs loaded
[ 0.668579] msgmni has been set to 198
[ 0.670898] alg: No test for stdrng (krng)
[ 0.671417] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[ 0.671508] io scheduler noop registered
[ 0.671539] io scheduler deadline registered
[ 0.671691] io scheduler cfq registered (default)
[ 0.734527] OMAP DSS rev 2.0
[ 0.734649] OMAP DISPC rev 3.0
[ 0.734710] OMAP VENC rev 2
[ 1.063507] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.083892] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[ 1.103424] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[ 1.122955] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[ 1.828094] console [ttyS2] enabled
[ 1.839385] brd: module loaded
[ 1.846343] loop: module loaded
[ 1.852539] omap2-nand driver initializing
[ 1.856994] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 2)
[ 1.865783] Creating 5 MTD partitions on "omap2-nand.0":
[ 1.871215] 0x000000000000-0x000000080000 : "X-Loader"
[ 1.878082] 0x000000080000-0x000000260000 : "U-Boot"
[ 1.885131] 0x000000260000-0x000000280000 : "U-Boot Env"
[ 1.891784] 0x000000280000-0x000000680000 : "Kernel"
[ 1.899627] 0x000000680000-0x000010000000 : "File System"
[ 2.004486] OneNAND driver initializing
[ 2.008911] usbcore: registered new interface driver cdc_ether
[ 2.014892] usbcore: registered new interface driver rndis_host
[ 2.021514] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.028472] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.034545] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numb1
[ 2.042236] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 2.062591] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.069274] hub 1-0:1.0: USB hub found
[ 2.073150] hub 1-0:1.0: 3 ports detected
[ 2.101745] Initializing USB Mass Storage driver...
[ 2.106811] usbcore: registered new interface driver usb-storage
[ 2.112945] USB Mass Storage support registered.
[ 2.117706] g_ether gadget: using random self ethernet address
[ 2.123596] g_ether gadget: using random host ethernet address
[ 2.130645] usb0: MAC 26:33:a3:ac:1d:06
[ 2.134582] usb0: HOST MAC fa:6e:40:bb:d0:2d
[ 2.138946] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 2.145690] g_ether gadget: g_ether ready
[ 2.149780] musb_hdrc musb_hdrc: MUSB HDRC host driver
[ 2.155364] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number2
[ 2.163482] hub 2-0:1.0: USB hub found
[ 2.167358] hub 2-0:1.0: 1 port detected
[ 2.172058] mice: PS/2 mouse device common for all mice
[ 2.178344] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/10
[ 2.189392] i2c /dev entries driver
[ 2.194274] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 2.201293] device-mapper: uevent: version 1.0.3
[ 2.207122] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-m
[ 2.216217] device-mapper: multipath: version 1.1.1 loaded
[ 2.221801] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.229431] sdhci: Secure Digital Host Controller Interface driver
[ 2.235717] sdhci: Copyright(c) Pierre Ossman
[ 2.243652] mmci-omap-hs: probe of mmci-omap-hs.1 failed with error -16
[ 2.254699] No device for DAI tlv320aic23
[ 2.319183] No device for DAI omap-mcbsp-dai-0
[ 2.323760] No device for DAI omap-mcbsp-dai-1
[ 2.328277] No device for DAI omap-mcbsp-dai-2
[ 2.332763] No device for DAI omap-mcbsp-dai-3
[ 2.337280] No device for DAI omap-mcbsp-dai-4
[ 2.341796] No device for DAI omap-mcpdm
[ 2.345794] Not OMAP3 EVM!
[ 2.348510] Not OMAP3517 / AM3517 EVM!
[ 2.352355] OMAP3 Beagle/Devkit8000 SoC init
[ 2.358154] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[ 2.367523] ALSA device list:
[ 2.370574] #0: omap3beagle (twl4030)
[ 2.376190] TCP cubic registered
[ 2.380615] NET: Registered protocol family 10
[ 2.386993] lo: Disabled Privacy Extensions
[ 2.393493] NET: Registered protocol family 17
[ 2.398284] ThumbEE CPU extension supported.
[ 2.404815] Power Management for TI OMAP3.
[ 2.418975] VFP support v0.3: implementor 41 architecture 3 part 30 variant 1
[ 2.427764] registered taskstats version 1
[ 2.432189] fbcvt: 1280x720@60: CVT Name - .921M9-R
[ 2.460815] Console: switching to colour frame buffer device 160x45
[ 2.481689] regulator_init_complete: incomplete constraints, leaving VDAC on
[ 2.489410] Freeing init memory: 260K
[ 2.655426] udev: starting version 151
[ 2.914367] mmc0: new high speed SD card at address 0002
[ 3.014892] mmcblk0: mmc0:0002 FLASH 1.87 GiB
[ 3.050872] mmcblk0: p1 p2
[ 4.208892] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesysm
[ 4.216674] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 5.523803] EXT4-fs (mmcblk0p2): recovery complete
[ 5.923248] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. )
nothing after this, it just hangs... there are some leds blinking on the board though, but nothing else.
Texas Instruments X-Loader 1.4.4ss (Sep 22 2010 - 16:12:19)
Beagle Rev Ax/Bx
Reading boot sector
Loading u-boot.bin from mmc
U-Boot 2010.03-dirty (Oct 18 2010 - 11:31:58)
OMAP3530-GP ES2.1, CPU-OPP2, L3-165MHz, Max clock-600Mhz
OMAP3 Beagle board + LPDDR/NAND
I2C: ready
DRAM: 128 MB
NAND: 256 MiB
*** Warning - bad CRC or NAND, using default environment
In: serial
Out: serial
Err: serial
Probing for expansion boards, if none are connected you'll see a harmless I2C e.
timed out in wait_for_bb: I2C_STAT=1000
timed out in wait_for_pin: I2C_STAT=0
I2C read: I/O error
Unrecognized expansion board: 0
Beagle Rev Ax/Bx
Die ID #1364000200000000040316e80701601c
Hit any key to stop autoboot: 0
mmc1 is available
The user button is currently NOT pressed.
reading boot.scr
679 bytes read
Running bootscript from mmc ...
## Executing script at 80200000
Debug: Demo Image Install
mmc1 is available
reading uImage
4098772 bytes read
reading uInitrd
4215860 bytes read
## Booting kernel from Legacy Image at 80300000 ...
Image Name: 2.6.35.8-l7
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4098708 Bytes = 3.9 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
## Loading init Ramdisk from Legacy Image at 81600000 ...
Image Name: initramfs
Image Type: ARM Linux RAMDisk Image (uncompressed)
Data Size: 4215796 Bytes = 4 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35.8-l7 (root@beagle-256mb-0) (gcc version 4.40
[ 0.000000] CPU: ARMv7 Processor [411fc082] revision 2 (ARMv7), cr=10c53c7f
[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction ce
[ 0.000000] Machine: OMAP3 Beagle Board
[ 0.000000] Beagle expansionboard: unknown
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] OMAP3430/3530 ES2.1 (l2cache iva sgx neon isp )
[ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x100000
[ 0.000000] Reserving 12582912 bytes SDRAM for VRAM
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pa2
[ 0.000000] Kernel command line: console=ttyS2,115200n8 console=tty0 root=/d0
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] allocated 655360 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memos
[ 0.000000] Memory: 128MB = 128MB total
[ 0.000000] Memory: 97452k/97452k available, 33620k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
[ 0.000000] vmalloc : 0xc8800000 - 0xf8000000 ( 760 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0049000 ( 260 kB)
[ 0.000000] .text : 0xc0049000 - 0xc078f000 (7448 kB)
[ 0.000000] .data : 0xc07fe000 - 0xc085d8c0 ( 383 kB)
[ 0.000000] SLUB: Genslabs=9, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, N1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:402
[ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz
[ 0.000000] omap_hwmod: l3_hwmod: cannot be enabled (3)
[ 0.000000] omap_hwmod: l4_core_hwmod: cannot be enabled (3)
[ 0.000000] omap_hwmod: l4_per_hwmod: cannot be enabled (3)
[ 0.000000] omap_hwmod: l4_wkup_hwmod: cannot be enabled (3)
[ 0.000000] Reprogramming SDRC clock to 332000000 Hz
[ 0.000000] GPMC revision 5.0
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrups
[ 0.000000] Total of 96 interrupts on 1 active controller
[ 0.000000] OMAP GPIO hardware version 2.5
[ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] console [tty0] enabled
[ 0.000000] Calibrating delay loop... 471.61 BogoMIPS (lpj=1843200)
[ 0.000000] pid_max: default: 32768 minimum: 301
[ 0.000000] Security Framework initialized
[ 0.000000] Smack: Initializing.
[ 0.000000] Mount-cache hash table entries: 512
[ 0.000000] Initializing cgroup subsys ns
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Initializing cgroup subsys memory
[ 0.000000] Initializing cgroup subsys devices
[ 0.000000] Initializing cgroup subsys freezer
[ 0.000000] CPU: Testing write buffer coherency: ok
[ 0.000000] devtmpfs: initialized
[ 0.000000] regulator: core version 0.5
[ 0.000000] NET: Registered protocol family 16
[ 0.000000] OMAP3 Beagle Rev: Ax/Bx
[ 0.000000] Found NAND on CS0
[ 0.000000] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 countee
[ 0.000000] Switched to new clocking rate (Crystal/Core/MPU): 26.0/600/332 Mz
[ 0.000213] OMAP DMA hardware revision 4.0
[ 0.000610] omap-mcpdm omap-mcpdm: unable to get pdm_ck: -2
[ 0.000701] omap-mcpdm: probe of omap-mcpdm failed with error -2
[ 0.006225] bio: create slab <bio-0> at 0
[ 0.007415] SCSI subsystem initialized
[ 0.008666] usbcore: registered new interface driver usbfs
[ 0.008789] usbcore: registered new interface driver hub
[ 0.009063] usbcore: registered new device driver usb
[ 0.009460] i2c_omap i2c_omap.1: bus 1 rev3.12 at 2600 kHz
[ 0.012207] twl4030: PIH (irq 7) chaining IRQs 368..375
[ 0.012298] twl4030: power (irq 373) chaining IRQs 376..383
[ 0.012786] twl4030: gpio (irq 368) chaining IRQs 384..401
[ 0.016296] regulator: VUSB1V5: 1500 mV normal standby
[ 0.016632] regulator: VUSB1V8: 1800 mV normal standby
[ 0.016998] regulator: VUSB3V1: 3100 mV normal standby
[ 0.018524] twl4030_usb twl4030_usb: Initialized TWL4030 USB module
[ 0.019165] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby
[ 0.019531] regulator: VDAC: 1800 mV normal standby
[ 0.019927] regulator: VPLL2: 1800 mV normal standby
[ 0.020416] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby
[ 0.020690] i2c_omap i2c_omap.2: bus 2 rev3.12 at 400 kHz
[ 0.029357] i2c_omap i2c_omap.3: bus 3 rev3.12 at 100 kHz
[ 0.030303] Advanced Linux Sound Architecture Driver Version 1.0.23.
[ 0.030883] NetLabel: Initializing
[ 0.030914] NetLabel: domain hash size = 128
[ 0.030944] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.031036] NetLabel: unlabeled traffic allowed by default
[ 0.031127] Switching to clocksource 32k_counter
[ 0.054840] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0
[ 0.060424] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using D2
[ 0.060821] NET: Registered protocol family 2
[ 0.061126] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.062072] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.062225] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.062316] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.062347] TCP reno registered
[ 0.062377] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.062530] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.062805] NET: Registered protocol family 1
[ 0.063293] RPC: Registered udp transport module.
[ 0.063354] RPC: Registered tcp transport module.
[ 0.063385] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.063720] Trying to unpack rootfs image as initramfs...
[ 0.507812] Freeing initrd memory: 4116K
[ 0.508819] PMU: registered new PMU device of type 0
[ 0.508941] dspbridge_init: 600000 bytes @ 82700000
[ 0.509582] audit: initializing netlink socket (disabled)
[ 0.509704] type=2000 audit(0.890:1): initialized
[ 0.660430] VFS: Disk quotas dquot_6.5.2
[ 0.660858] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.666595] fuse init (API version 7.14)
[ 0.668518] Btrfs loaded
[ 0.668579] msgmni has been set to 198
[ 0.670898] alg: No test for stdrng (krng)
[ 0.671417] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
[ 0.671508] io scheduler noop registered
[ 0.671539] io scheduler deadline registered
[ 0.671691] io scheduler cfq registered (default)
[ 0.734527] OMAP DSS rev 2.0
[ 0.734649] OMAP DISPC rev 3.0
[ 0.734710] OMAP VENC rev 2
[ 1.063507] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.083892] serial8250.0: ttyS0 at MMIO 0x4806a000 (irq = 72) is a ST16654
[ 1.103424] serial8250.1: ttyS1 at MMIO 0x4806c000 (irq = 73) is a ST16654
[ 1.122955] serial8250.2: ttyS2 at MMIO 0x49020000 (irq = 74) is a ST16654
[ 1.828094] console [ttyS2] enabled
[ 1.839385] brd: module loaded
[ 1.846343] loop: module loaded
[ 1.852539] omap2-nand driver initializing
[ 1.856994] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 2)
[ 1.865783] Creating 5 MTD partitions on "omap2-nand.0":
[ 1.871215] 0x000000000000-0x000000080000 : "X-Loader"
[ 1.878082] 0x000000080000-0x000000260000 : "U-Boot"
[ 1.885131] 0x000000260000-0x000000280000 : "U-Boot Env"
[ 1.891784] 0x000000280000-0x000000680000 : "Kernel"
[ 1.899627] 0x000000680000-0x000010000000 : "File System"
[ 2.004486] OneNAND driver initializing
[ 2.008911] usbcore: registered new interface driver cdc_ether
[ 2.014892] usbcore: registered new interface driver rndis_host
[ 2.021514] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.028472] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller
[ 2.034545] ehci-omap ehci-omap.0: new USB bus registered, assigned bus numb1
[ 2.042236] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800
[ 2.062591] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00
[ 2.069274] hub 1-0:1.0: USB hub found
[ 2.073150] hub 1-0:1.0: 3 ports detected
[ 2.101745] Initializing USB Mass Storage driver...
[ 2.106811] usbcore: registered new interface driver usb-storage
[ 2.112945] USB Mass Storage support registered.
[ 2.117706] g_ether gadget: using random self ethernet address
[ 2.123596] g_ether gadget: using random host ethernet address
[ 2.130645] usb0: MAC 26:33:a3:ac:1d:06
[ 2.134582] usb0: HOST MAC fa:6e:40:bb:d0:2d
[ 2.138946] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 2.145690] g_ether gadget: g_ether ready
[ 2.149780] musb_hdrc musb_hdrc: MUSB HDRC host driver
[ 2.155364] musb_hdrc musb_hdrc: new USB bus registered, assigned bus number2
[ 2.163482] hub 2-0:1.0: USB hub found
[ 2.167358] hub 2-0:1.0: 1 port detected
[ 2.172058] mice: PS/2 mouse device common for all mice
[ 2.178344] input: twl4030_pwrbutton as /devices/platform/i2c_omap.1/i2c-1/10
[ 2.189392] i2c /dev entries driver
[ 2.194274] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec
[ 2.201293] device-mapper: uevent: version 1.0.3
[ 2.207122] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-m
[ 2.216217] device-mapper: multipath: version 1.1.1 loaded
[ 2.221801] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 2.229431] sdhci: Secure Digital Host Controller Interface driver
[ 2.235717] sdhci: Copyright(c) Pierre Ossman
[ 2.243652] mmci-omap-hs: probe of mmci-omap-hs.1 failed with error -16
[ 2.254699] No device for DAI tlv320aic23
[ 2.319183] No device for DAI omap-mcbsp-dai-0
[ 2.323760] No device for DAI omap-mcbsp-dai-1
[ 2.328277] No device for DAI omap-mcbsp-dai-2
[ 2.332763] No device for DAI omap-mcbsp-dai-3
[ 2.337280] No device for DAI omap-mcbsp-dai-4
[ 2.341796] No device for DAI omap-mcpdm
[ 2.345794] Not OMAP3 EVM!
[ 2.348510] Not OMAP3517 / AM3517 EVM!
[ 2.352355] OMAP3 Beagle/Devkit8000 SoC init
[ 2.358154] asoc: twl4030 <-> omap-mcbsp-dai-0 mapping ok
[ 2.367523] ALSA device list:
[ 2.370574] #0: omap3beagle (twl4030)
[ 2.376190] TCP cubic registered
[ 2.380615] NET: Registered protocol family 10
[ 2.386993] lo: Disabled Privacy Extensions
[ 2.393493] NET: Registered protocol family 17
[ 2.398284] ThumbEE CPU extension supported.
[ 2.404815] Power Management for TI OMAP3.
[ 2.418975] VFP support v0.3: implementor 41 architecture 3 part 30 variant 1
[ 2.427764] registered taskstats version 1
[ 2.432189] fbcvt: 1280x720@60: CVT Name - .921M9-R
[ 2.460815] Console: switching to colour frame buffer device 160x45
[ 2.481689] regulator_init_complete: incomplete constraints, leaving VDAC on
[ 2.489410] Freeing init memory: 260K
[ 2.655426] udev: starting version 151
[ 2.914367] mmc0: new high speed SD card at address 0002
[ 3.014892] mmcblk0: mmc0:0002 FLASH 1.87 GiB
[ 3.050872] mmcblk0: p1 p2
[ 4.208892] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesysm
[ 4.216674] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[ 5.523803] EXT4-fs (mmcblk0p2): recovery complete
[ 5.923248] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. )
nothing after this, it just hangs... there are some leds blinking on the board though, but nothing else.