Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #6 for (,msdos6)/boot/grub.
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #11 for (,msdos11)/boot/grub.
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /BOOT.INI /ntldr /NTLDR /NTDETECT.COM
/ntdetect.com
sda2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sda3: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda7: __________________________________________________ _______________________
File system: ext3
Boot sector type: Grub
Boot sector info: Grub 0.97 is installed in the boot sector of sda7 and
looks at sector 103742719 of the same hard drive for
the stage2 file. A stage2 file is at this location on
/dev/sda. Stage2 looks on partition #7 for
/boot/grub/menu.lst.
Mounting failed:
mount: /dev/sda7 already mounted or sda7 busy
sdb1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /boot.ini /BOOT.INI /ntldr /NTLDR /NTDETECT.COM
/ntdetect.com
sdb2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: According to the info in the boot sector, sdb5 starts
at sector 63.
Operating System: Windows XP
Boot files/dirs:
sdb6: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: According to the info in the boot sector, sdb6 starts
at sector 63. According to the info in the boot
sector, sdb6 has 27784280 sectors, but according to
the info from fdisk, it has 28451113 sectors.
Operating System:
Boot files/dirs:
sdb7: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: According to the info in the boot sector, sdb7 starts
at sector 63.
Operating System:
Boot files/dirs:
sdb8: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: According to the info in the boot sector, sdb8 starts
at sector 63.
Operating System:
Boot files/dirs:
sdb9: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: According to the info in the boot sector, sdb9 starts
at sector 63.
Operating System:
Boot files/dirs:
sdb10: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdb11: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 40,965,749 40,965,687 7 HPFS/NTFS
/dev/sda2 40,965,750 80,035,829 39,070,080 7 HPFS/NTFS
/dev/sda3 80,035,891 156,296,384 76,260,494 5 Extended
/dev/sda5 80,035,893 81,995,759 1,959,867 82 Linux swap / Solaris
/dev/sda6 81,995,823 101,530,799 19,534,977 83 Linux
/dev/sda7 101,530,863 156,296,384 54,765,522 83 Linux
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 63 17,542,979 17,542,917 7 HPFS/NTFS
/dev/sdb2 * 17,543,041 312,576,704 295,033,664 f W95 Ext d (LBA)
/dev/sdb5 17,543,043 40,965,749 23,422,707 7 HPFS/NTFS
/dev/sdb6 40,965,813 69,416,926 28,451,114 7 HPFS/NTFS
/dev/sdb7 122,897,313 204,828,749 81,931,437 7 HPFS/NTFS
/dev/sdb8 204,828,813 258,084,224 53,255,412 7 HPFS/NTFS
/dev/sdb9 258,084,288 312,576,704 54,492,417 7 HPFS/NTFS
/dev/sdb10 69,416,928 73,609,829 4,192,902 82 Linux swap / Solaris
/dev/sdb11 73,609,893 122,897,249 49,287,357 83 Linux
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/sda1 CE608962608951DF ntfs
/dev/sda2 D8CCB9E6CCB9BF56 ntfs
/dev/sda3: PTTYPE="dos" PART_ENTRY_SCHEME="dos" PART_ENTRY_TYPE="0x5" PART_ENTRY_NUMBER="3"
/dev/sda5 412c0924-a9d4-4446-8cca-10a91ea33346 swap
/dev/sda6 65e7cf33-7bf5-4fb9-b177-c91b387f1a98 ext3
/dev/sda7 5f547952-6bdb-422e-a616-4e009a986dfe ext3
/dev/sda: PTTYPE="dos"
/dev/sdb1 1633C6ACF7CF1369 ntfs 160part1
/dev/sdb10 bad0d747-e8da-4ce8-aa98-e3d1fbc872b2 swap
/dev/sdb11 47c4241f-20e7-4f2b-8272-20f80ceeb3be ext3
/dev/sdb2: PTTYPE="dos" PART_ENTRY_SCHEME="dos" PART_ENTRY_TYPE="0xf" PART_ENTRY_FLAGS="0x80" PART_ENTRY_NUMBER="2"
/dev/sdb5 163485525819FB71 ntfs xp pro
/dev/sdb6 3AE462E5E462A2BD ntfs
/dev/sdb7 6AD46C15D46BE235 ntfs
/dev/sdb8 0838972838971432 ntfs
/dev/sdb9 1038C2A238C28666 ntfs
/dev/sdb: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
rootfs / rootfs (rw)
/dev/root / ext3 (rw,noatime,errors=continue,barrier=0,data=writeba ck)
/dev/sda6 /mnt/sda6 ext3 (rw)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
================================ sda1/BOOT.INI: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
=========================== sda6/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set 65e7cf33-7bf5-4fb9-b177-c91b387f1a98
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set 65e7cf33-7bf5-4fb9-b177-c91b387f1a98
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set 65e7cf33-7bf5-4fb9-b177-c91b387f1a98
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=65e7cf33-7bf5-4fb9-b177-c91b387f1a98 ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set 65e7cf33-7bf5-4fb9-b177-c91b387f1a98
echo 'Loading Linux 2.6.35-22-generic ...'
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=65e7cf33-7bf5-4fb9-b177-c91b387f1a98 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set 65e7cf33-7bf5-4fb9-b177-c91b387f1a98
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set 65e7cf33-7bf5-4fb9-b177-c91b387f1a98
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sda1)" {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set ce608962608951df
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Gentoo (on /dev/sda7)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set 5f547952-6bdb-422e-a616-4e009a986dfe
linux /boot/kernel-2.6.36-gentoo root=/dev/sda7
}
menuentry "Windows NT/2000/XP (loader) (on /dev/sdb1)" {
insmod part_msdos
insmod ntfs
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 1633c6acf7cf1369
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.35-22-generic (on /dev/sdb11)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos11)'
search --no-floppy --fs-uuid --set 47c4241f-20e7-4f2b-8272-20f80ceeb3be
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=47c4241f-20e7-4f2b-8272-20f80ceeb3be ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry "Ubuntu, with Linux 2.6.35-22-generic (recovery mode) (on /dev/sdb11)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos11)'
search --no-floppy --fs-uuid --set 47c4241f-20e7-4f2b-8272-20f80ceeb3be
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=47c4241f-20e7-4f2b-8272-20f80ceeb3be ro single
initrd /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=============================== sda6/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda6 during installation
UUID=65e7cf33-7bf5-4fb9-b177-c91b387f1a98 / ext3 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=412c0924-a9d4-4446-8cca-10a91ea33346 none swap sw 0 0
# swap was on /dev/sdb10 during installation
UUID=bad0d747-e8da-4ce8-aa98-e3d1fbc872b2 none swap sw 0 0
=================== sda6: Location of files loaded by Grub: ===================
49.5GB: boot/grub/core.img
49.5GB: boot/grub/grub.cfg
49.5GB: boot/initrd.img-2.6.35-22-generic
49.6GB: boot/vmlinuz-2.6.35-22-generic
49.5GB: initrd.img
49.6GB: vmlinuz
================================ sdb1/boot.ini: ================================
[boot loader]
timeout=3
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect
================================ sdb1/BOOT.INI: ================================
[boot loader]
timeout=3
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Professional" /fastdetect
========================== sdb11/boot/grub/grub.cfg: ==========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
set have_grubenv=true
load_env
fi
set default="0"
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi
}
function load_video {
insmod vbe
insmod vga
}
insmod part_msdos
insmod ext2
set root='(hd1,msdos11)'
search --no-floppy --fs-uuid --set 47c4241f-20e7-4f2b-8272-20f80ceeb3be
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
load_video
insmod gfxterm
fi
terminal_output gfxterm
insmod part_msdos
insmod ext2
set root='(hd1,msdos11)'
search --no-floppy --fs-uuid --set 47c4241f-20e7-4f2b-8272-20f80ceeb3be
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ "${recordfail}" = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.35-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd1,msdos11)'
search --no-floppy --fs-uuid --set 47c4241f-20e7-4f2b-8272-20f80ceeb3be
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=47c4241f-20e7-4f2b-8272-20f80ceeb3be ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.35-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod part_msdos
insmod ext2
set root='(hd1,msdos11)'
search --no-floppy --fs-uuid --set 47c4241f-20e7-4f2b-8272-20f80ceeb3be
echo 'Loading Linux 2.6.35-22-generic ...'
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=47c4241f-20e7-4f2b-8272-20f80ceeb3be ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.35-22-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos11)'
search --no-floppy --fs-uuid --set 47c4241f-20e7-4f2b-8272-20f80ceeb3be
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod part_msdos
insmod ext2
set root='(hd1,msdos11)'
search --no-floppy --fs-uuid --set 47c4241f-20e7-4f2b-8272-20f80ceeb3be
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Professional (on /dev/sda1)" {
insmod part_msdos
insmod ntfs
set root='(hd0,msdos1)'
search --no-floppy --fs-uuid --set ce608962608951df
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.35-22-generic (on /dev/sda6)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set 65e7cf33-7bf5-4fb9-b177-c91b387f1a98
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=65e7cf33-7bf5-4fb9-b177-c91b387f1a98 ro quiet splash
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry "Ubuntu, with Linux 2.6.35-22-generic (recovery mode) (on /dev/sda6)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos6)'
search --no-floppy --fs-uuid --set 65e7cf33-7bf5-4fb9-b177-c91b387f1a98
linux /boot/vmlinuz-2.6.35-22-generic root=UUID=65e7cf33-7bf5-4fb9-b177-c91b387f1a98 ro single
initrd /boot/initrd.img-2.6.35-22-generic
}
menuentry "Gentoo (on /dev/sda7)" {
insmod part_msdos
insmod ext2
set root='(hd0,msdos7)'
search --no-floppy --fs-uuid --set 5f547952-6bdb-422e-a616-4e009a986dfe
linux /boot/kernel-2.6.36-gentoo root=/dev/sda7
}
menuentry "Windows NT/2000/XP (loader) (on /dev/sdb1)" {
insmod part_msdos
insmod ntfs
set root='(hd1,msdos1)'
search --no-floppy --fs-uuid --set 1633c6acf7cf1369
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
=============================== sdb11/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdb11 during installation
UUID=47c4241f-20e7-4f2b-8272-20f80ceeb3be / ext3 errors=remount-ro 0 1
# swap was on /dev/sda5 during installation
UUID=412c0924-a9d4-4446-8cca-10a91ea33346 none swap sw 0 0
# swap was on /dev/sdb10 during installation
UUID=bad0d747-e8da-4ce8-aa98-e3d1fbc872b2 none swap sw 0 0
=================== sdb11: Location of files loaded by Grub: ===================
40.5GB: boot/grub/core.img
40.5GB: boot/grub/grub.cfg
40.6GB: boot/initrd.img-2.6.35-22-generic
40.5GB: boot/vmlinuz-2.6.35-22-generic
40.6GB: initrd.img
40.5GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================
Unknown BootLoader on sda3
00000000 00 00 02 8b b4 24 d0 04 00 00 8b 44 24 38 c1 bc |.....$.....D$8..|
00000010 24 a8 04 00 00 02 8b 8c 24 bc 04 00 00 8b 90 48 |$.......$......H|
00000020 01 00 00 89 74 24 08 8b 84 24 9c 04 00 00 8b 59 |....t$...$.....Y|
00000030 20 01 9c 24 a8 04 00 00 0f af c6 8b 9c 24 90 04 | ..$.........$..|
00000040 00 00 8b b4 24 94 04 00 00 8b 8c 24 a8 04 00 00 |....$......$....|
00000050 89 1c 24 01 c1 89 4c 24 04 ff 54 b2 40 ff 84 24 |..$...L$..T.@..$|
00000060 ac 04 00 00 83 bc 24 ac 04 00 00 03 0f 8e 64 fe |......$.......d.|
00000070 ff ff e9 19 59 ff ff 8b 8c 24 ac 04 00 00 8b 44 |....Y....$.....D|
00000080 24 38 8b 94 24 a4 04 00 00 0f af 54 c8 08 89 d0 |$8..$......T....|
00000090 99 f7 bc 24 b4 04 00 00 89 44 24 24 89 c8 83 e0 |...$.....D$$....|
000000a0 01 8d 4d 04 d3 e0 8b 4c 24 24 01 c8 89 84 24 a8 |..M....L$$....$.|
000000b0 04 00 00 e9 63 fe ff ff 8b 44 24 38 b9 08 00 00 |....c....D$8....|
000000c0 00 d1 fe d1 fb 8b 90 3c 01 00 00 8b 84 24 bc 04 |.......<.....$..|
000000d0 00 00 89 4c 24 0c 8b 8c 24 d0 04 00 00 0f af d9 |...L$...$.......|
000000e0 89 4c 24 08 03 30 8b 84 24 90 04 00 00 8d 0c 1e |.L$..0..$.......|
000000f0 89 4c 24 04 8b 5c 24 20 89 04 24 ff 54 9a 10 d1 |.L$..\$ ..$.T...|
00000100 bc 24 9c 04 00 00 b9 08 00 00 00 8b 74 24 38 d1 |.$..........t$8.|
00000110 bc 24 a8 04 00 00 8b 84 24 bc 04 00 00 8b 96 40 |.$......$......@|
00000120 01 00 00 89 4c 24 0c 8b b4 24 d0 04 00 00 8b 8c |....L$...$......|
00000130 24 9c 04 00 00 89 74 24 08 8b 58 20 0f af ce 01 |$.....t$..X ....|
00000140 9c 24 a8 04 00 00 8b 9c 24 90 04 00 00 8b b4 24 |.$......$......$|
00000150 94 04 00 00 8b 84 24 a8 04 00 00 89 1c 24 01 c8 |......$......$..|
00000160 89 44 24 04 ff 54 b2 10 e9 f0 fe ff ff 8b 8c 24 |.D$..T.........$|
00000170 ac 04 00 00 8b 44 24 38 8b 94 24 a4 04 00 00 0f |.....D$8..$.....|
00000180 af 54 c8 0c 89 d0 99 f7 bc 24 b4 04 00 00 89 44 |.T.......$.....D|
00000190 24 24 8b 54 24 24 89 c8 d1 f8 8d 4d 04 d3 e0 01 |$$.T$$.....M....|
000001a0 d0 89 84 24 9c 04 00 00 e9 95 fd ff ff 8b 6c 24 |...$..........l$|
000001b0 38 c1 fb 02 8b bc 24 d0 04 00 00 8b 84 24 00 fe |8.....$......$..|
000001c0 ff ff 82 fe ff ff 02 00 00 00 bb e7 1d 00 00 fe |................|
000001d0 ff ff 05 fe ff ff bd e7 1d 00 c0 14 2a 01 00 00 |............*...|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
=============================== StdErr Messages: ===============================
No volume groups found
i can change the rubbish entries once i get ti usb drive :)