View Full Version : [ubuntu] Brightness control problem
shaikat
October 21st, 2010, 11:52 PM
Hi All,
I am quite new in Linux and Ubuntu. I installed Ubuntu 10.04 in my Aspire 5738z Laptop. When I was using windows I can adjust my laptops brightness by pressing Fn+Left/Right arrow key. But after installing Ubuntu, it does not work. It is shown a brightness meter in the screen that is increasing/decreasing but actually the brightness does not increase/decrease.
So, Now how can I able to fix the problem.
Thanks in advance.
-Shaikat
jlsm
October 22nd, 2010, 09:35 AM
bump. I also have the same problem with my lenovo 3000 g430. The slider appears when pressing fn+up/down, but the actual display is not dimming/brightening.
I have searched other posts and threads for a solution, but none of the advised solutions are working. I've tried "xrandr --output LVDS --set BACKLIGHT_CONTROL native" and it restarted Maverick, but didn't work.
xrandr -q results were
Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
VGA1 disconnected (normal left inverted right x axis y axis)
LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 303mm x 190mm
1280x800 60.0*+
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
DP1 disconnected (normal left inverted right x axis y axis)
so I tried changing LVDS in the xrandr --output to LVDS1 which resulted in an error,
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 150 (RANDR)
Minor opcode of failed request: 11 (RRQueryOutputProperty)
Serial number of failed request: 29
Current serial number in output stream: 29
BTW, I installed xbacklight as another post suggested, but I don't know how to use it.
Any help would be greatly appreciated.
jlsm
realzippy
October 22nd, 2010, 09:51 AM
BTW, I installed xbacklight as another post suggested, but I don't know how to use it.
You have to run it from the terminal:
xbacklight -set 60
e.g. should set brightness to 60 %
mosaic2s
October 22nd, 2010, 11:30 AM
Once you are willing to check out LINUX or UBUNTU for your work, do a thorough check of the compatible hardware before making that purchase decision.
That is 99% of the work done. Balance 1% is trouble shooting.
shaikat
October 22nd, 2010, 01:55 PM
BTW, I installed xbacklight as another post suggested, but I don't know how to use it.
You have to run it from the terminal:
xbacklight -set 60
e.g. should set brightness to 60 %
Nothing happen. :confused:
realzippy
October 22nd, 2010, 02:44 PM
seems to be a known bug:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/489041
Would test the workaround 3esmit suggests.
shaikat
October 23rd, 2010, 09:21 PM
ok I understand its a bug. The Fn+Arrow key do not work. But is there any command so that I can adjust the brightness of the monitor.
Thanks
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.