PDA

View Full Version : [ubuntu] Wubi Migration to Partiton issuses



barnesk9
August 24th, 2010, 06:54 PM
I have an issue with my migration to a partition. I used the script from wubiGiude.org (https://wiki.ubuntu.com/WubiGuide#How%20do%20I%20migrate%20to%20a%20real%2 0partition,%20and/or%20get%20rid%20of%20Windows%20entirely?) and the shell script wubi-move-to-partition,

everything seemed to go well except there was no entry for the new ubuntu partition in grub when the computer started, I have already uninstalled wubi via windows. I now have a ubuntu partition that I can't access can some please help me out?


I've run bootinfoscript and here are my results, any help would be great because I have put a lot of work into this installation and I would hate to have to reinstall and start from scratch




Boot Info Script 0.55 dated February 15th, 2010

============================= Boot Info Summary: ==============================

=> Windows is installed in the MBR of /dev/sda

sda1: __________________________________________________ _______________________

File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM /wubildr.mbr
/ubuntu/winboot/wubildr.mbr /wubildr
/ubuntu/winboot/wubildr /ubuntu/disks/root.disk
/ubuntu/disks/swap.disk

sda1/Wubi: __________________________________________________ _______________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab

sda2: __________________________________________________ _______________________

File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab

sda3: __________________________________________________ _______________________

File system: Extended Partition
Boot sector type: Unknown
Boot sector info:

sda5: __________________________________________________ _______________________

File system: swap
Boot sector type: -
Boot sector info:

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ __________________________________________________ ___

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start End Size Id System

/dev/sda1 * 2,048 224,335,439 224,333,392 7 HPFS/NTFS
/dev/sda2 224,347,725 303,226,874 78,879,150 83 Linux
/dev/sda3 303,226,875 312,576,704 9,349,830 5 Extended
/dev/sda5 303,226,938 312,576,704 9,349,767 82 Linux swap / Solaris


blkid -c /dev/null: __________________________________________________ __________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/loop1 d7069958-9bd6-41f6-80a0-244dbad7267b ext4
/dev/sda1 CA5AADC05AADAA21 ntfs
/dev/sda2 c1c77d74-af08-42b2-9c7b-968c416a370c ext3
/dev/sda3: PTTYPE="dos"
/dev/sda5 5a88ddb2-3b5b-4577-a9ff-3e1bcccc5fab swap
/dev/sda: PTTYPE="dos"

============================ "mount | grep ^/dev output: ===========================

Device Mount_Point Type Options

aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)


================================ sda1/boot.ini: ================================

[boot loader]

timeout=3

default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="IBM Client for e-business Windows XP v3.01" /noexecute=alwaysoff /fastdetect

C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons

C:\wubildr.mbr = "Xubuntu"


======================== sda1/Wubi/boot/grub/grub.cfg: ========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows NT/2000/XP (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set ca5aadc05aadaa21
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.32-24-generic (on /dev/sda2)" {
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set c1c77d74-af08-42b2-9c7b-968c416a370c
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=c1c77d74-af08-42b2-9c7b-968c416a370c ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry "Ubuntu, with Linux 2.6.32-24-generic (recovery mode) (on /dev/sda2)" {
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set c1c77d74-af08-42b2-9c7b-968c416a370c
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=c1c77d74-af08-42b2-9c7b-968c416a370c ro single
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry "Ubuntu, with Linux 2.6.32-21-generic (on /dev/sda2)" {
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set c1c77d74-af08-42b2-9c7b-968c416a370c
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c1c77d74-af08-42b2-9c7b-968c416a370c ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry "Ubuntu, with Linux 2.6.32-21-generic (recovery mode) (on /dev/sda2)" {
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set c1c77d74-af08-42b2-9c7b-968c416a370c
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c1c77d74-af08-42b2-9c7b-968c416a370c ro single
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

============================= sda1/Wubi/etc/fstab: =============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0

================= sda1/Wubi: Location of files loaded by Grub: =================


6.6GB: boot/grub/grub.cfg
.1GB: boot/initrd.img-2.6.32-21-generic
6.5GB: boot/vmlinuz-2.6.32-21-generic
.1GB: initrd.img
6.5GB: vmlinuz

=========================== sda2/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-24-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set c1c77d74-af08-42b2-9c7b-968c416a370c
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=c1c77d74-af08-42b2-9c7b-968c416a370c ro quiet splash
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-24-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set c1c77d74-af08-42b2-9c7b-968c416a370c
echo 'Loading Linux 2.6.32-24-generic ...'
linux /boot/vmlinuz-2.6.32-24-generic root=UUID=c1c77d74-af08-42b2-9c7b-968c416a370c ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-24-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set c1c77d74-af08-42b2-9c7b-968c416a370c
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c1c77d74-af08-42b2-9c7b-968c416a370c ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set c1c77d74-af08-42b2-9c7b-968c416a370c
echo 'Loading Linux 2.6.32-21-generic ...'
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=c1c77d74-af08-42b2-9c7b-968c416a370c ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set c1c77d74-af08-42b2-9c7b-968c416a370c
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set c1c77d74-af08-42b2-9c7b-968c416a370c
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

=============================== sda2/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0



UUID= / ext3 errors=remount-ro 0 1
UUID= none swap sw 0 0

=================== sda2: Location of files loaded by Grub: ===================


117.6GB: boot/grub/grub.cfg
117.5GB: boot/initrd.img-2.6.32-21-generic
117.6GB: boot/initrd.img-2.6.32-24-generic
117.6GB: boot/vmlinuz-2.6.32-21-generic
117.6GB: boot/vmlinuz-2.6.32-24-generic
117.6GB: initrd.img
117.5GB: initrd.img.old
117.6GB: vmlinuz
117.6GB: vmlinuz.old
=========================== Unknown MBRs/Boot Sectors/etc =======================

Unknown BootLoader on sda3

00000000 8e a6 27 0d db 97 a2 4c 7a fc ad d6 3f 99 df 93 |..'....Lz...?...|
00000010 e3 4f 36 82 b3 2f dc 3b e8 7a c7 ab ff 64 fc 9b |.O6../.;.z...d..|
00000020 29 3f fb 6b 03 d6 0f da df 83 4c 79 ce f8 94 fe |)?.k......Ly....|
00000030 d8 aa 1e d5 6f 0e 58 c8 39 60 b1 cc 01 65 02 68 |....o.X.9`...e.h|
00000040 77 b7 c1 f9 da 64 2e b0 30 cb 5c 98 63 2e cc 33 |w....d..0.\.c..3|
00000050 b9 32 33 51 e2 24 09 8f f2 51 b4 84 50 52 27 12 |.23Q.$...Q..PR'.|
00000060 42 29 3f c1 dc d9 99 46 7c e3 3d 2e 3c da b7 be |B)?....F|.=.<...|
00000070 8d 26 a5 ba e2 3e eb 77 f1 8f 18 ff 8f 1b c4 5f |.&...>.w......._|
00000080 72 de 48 e9 a9 12 fe c2 f5 b4 6d 4c 3c 45 12 db |r.H.......mL<E..|
00000090 d3 da 52 76 6e 06 1b ff 98 64 44 5a 79 b6 bb 77 |..Rvn....dDZy..w|
000000a0 e0 eb bb be 78 0b f9 0f 94 65 aa 6f eb bd 7e a1 |....x....e.o..~.|
000000b0 7f 3f 7f 1e c9 f4 4f 66 4a 9f b4 bf f2 a4 a7 f7 |.?....OfJ.......|
000000c0 a6 ce 50 06 f2 cf 57 f7 d3 fe 65 e9 f2 ef 1a 78 |..P...W...e....x|
000000d0 fd 9f fc 17 9d 44 f9 a1 5e c7 1b 64 7e 34 8d f9 |.....D..^..d~4..|
000000e0 ed b9 f6 a4 fd 79 c1 9e 41 fd 39 fe 21 ed 3f 48 |.....y..A.9.!.?H|
000000f0 7e f6 da dd 83 f4 17 5b 98 7e 52 5a 7a fb fc b7 |~......[.~RZz...|
00000100 52 aa b2 2e 65 3e 9c 6b df 4f fe 11 d7 3a f3 e1 |R...e>.k.O...:..|
00000110 3c ab d2 cb 26 a0 06 22 1b fd a1 33 99 fd 72 1f |<...&.."...3..r.|
00000120 e7 0a 91 e0 e5 d6 50 76 bd c5 12 a0 3c e2 04 28 |......Pv....<..(|
00000130 cd f6 6f c4 e1 cc ce f4 60 4c 55 9b 65 3c c5 d8 |..o.....`LU.e<..|
00000140 00 1b 26 c6 08 35 be 7b 2c 4e f1 bd 76 e4 75 e9 |..&..5.{,N..v.u.|
00000150 ae 8d 02 e7 2e 1a c7 4b ef 60 6e 1f 7b 3e f3 7e |.......K.`n.{>.~|
00000160 e6 7b 1f 70 fd ff 1a 35 fe 5e f7 e6 60 fb 9f 8c |.{.p...5.^..`...|
00000170 6b 97 6c bf 4a 98 ed ec f7 4f ae 3d 2c 66 92 61 |k.l.J....O.=,f.a|
00000180 d7 9c 70 be 6b 3f da 3e 98 7f 8e 49 f4 ff cc 6f |..p.k?.>...I...o|
00000190 7d e9 c9 ef df 14 9b a9 fb 37 98 ad 27 76 0c ed |}........7..'v..|
000001a0 29 af a7 b4 fc cc eb a1 5b de a7 fd 33 97 a7 fc |).......[...3...|
000001b0 67 42 7b a6 fe 43 12 47 ca 7c 4e bc 16 af 00 fe |gB{..C.G.|N.....|
000001c0 ff ff 82 fe ff ff 3f 00 00 00 87 aa 8e 00 00 00 |......?.........|
000001d0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
*
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200

bcbc
August 24th, 2010, 07:17 PM
OK so there are a couple of things...

I take it you reinstalled WUBI, but during the install you hit the SKIP button? The reason I am assuming this is that your WUBI grub menu doesn't have the wubi install in it.

So, can you boot any install of Ubuntu, or can you only boot a Live CD environment?

If you can boot Ubuntu, then paste the result of the following:

sudo mount

barnesk9
August 24th, 2010, 07:48 PM
I have uninstalled Wubi because that's what the tutorial said to do, the only way I can boot into Ubuntu is with a live cd

bcbc
August 24th, 2010, 08:24 PM
I have uninstalled Wubi because that's what the tutorial said to do, the only way I can boot into Ubuntu is with a live cd

The bootinfoscript seems to indicate that wubi is still installed. And you have Xubuntu in your boot.ini.


sda1: __________________________________________________ _______________________

File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM /wubildr.mbr
/ubuntu/winboot/wubildr.mbr /wubildr
/ubuntu/winboot/wubildr /ubuntu/disks/root.disk
/ubuntu/disks/swap.disk


================================ sda1/boot.ini: ================================

[boot loader]

timeout=3

default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S

[operating systems]

multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="IBM Client for e-business Windows XP v3.01" /noexecute=alwaysoff /fastdetect

C:\CMDCONS\BOOTSECT.DAT="Microsoft Windows Recovery Console" /cmdcons

C:\wubildr.mbr = "Xubuntu"

Anyway - I'll give you instructions based on booting from the live CD... shortly.

bcbc
August 24th, 2010, 08:29 PM
To fix the migrated install do this:
1. Boot the Live CD.
2. Mount the migrated install

sudo mount /dev/sda2 /mnt
3. Edit the fstab.

gksudo gedit /mnt/etc/fstab

4. Change what is there to this:

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0



UUID=c1c77d74-af08-42b2-9c7b-968c416a370c / ext3 errors=remount-ro 0 1
UUID=5a88ddb2-3b5b-4577-a9ff-3e1bcccc5fab none swap sw 0 0
5. Install grub to the MBR of the drive

sudo grub-install --root-directory=/mnt /dev/sda


6.Reboot. You will see a grub menu, that does not include Windows in it. Boot the first entry and it should successfully load your migrated install. Then run:

sudo update-grub
This should pick up the windows install. Confirm by rebooting and booting into windows.

If you encounter an issue, stop and post back here.

barnesk9
August 24th, 2010, 11:58 PM
Oh man thank you so much now I can get into my Ubuntu installation again, I am forever in your debt, all your help is greatly appreciated

bcbc
August 25th, 2010, 12:45 AM
Oh man thank you so much now I can get into my Ubuntu installation again, I am forever in your debt, all your help is greatly appreciated

You are very welcome :) I'm happy it worked out!

chauncy22
January 10th, 2011, 03:09 AM
Hi bcbc, thank you for the support you have been providing. I have the same issue, unable to boot into migrated partition. This is what I have. please help!

Boot Info Script 0.55 dated February 15th, 2010

============================= Boot Info Summary: ==============================

=> Windows is installed in the MBR of /dev/sda

sda1: __________________________________________________ _______________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/grldr /wubildr.mbr /ubuntu/winboot/wubildr.mbr
/wubildr /ubuntu/winboot/wubildr
/ubuntu/disks/root.disk /ubuntu/disks/swap.disk

sda1/Wubi: __________________________________________________ _______________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab

sda2: __________________________________________________ _______________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /Windows/System32/winload.exe

sda3: __________________________________________________ _______________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ __________________________________________________ ___

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start End Size Id System

/dev/sda1 * 2,048 577,847,279 577,845,232 7 HPFS/NTFS
/dev/sda2 641,230,848 976,771,047 335,540,200 7 HPFS/NTFS
/dev/sda3 577,858,050 641,218,409 63,360,360 83 Linux


blkid -c /dev/null: __________________________________________________ __________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/loop1 16a1bc82-2a35-4146-ae09-8d839efa0235 ext4
/dev/sda1 180E62B40E628B18 ntfs Local Disk
/dev/sda2 38C6A335C6A2F1F4 ntfs
/dev/sda3 4245b981-cb8d-4dfb-9a75-30b4818b938f ext4
/dev/sda: PTTYPE="dos"

============================ "mount | grep ^/dev output: ===========================

Device Mount_Point Type Options

aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)


======================== sda1/Wubi/boot/grub/grub.cfg: ========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=1280x1024
set gfxpayload=1920x1200
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.32-27-generic" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-27-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-27-generic
}
menuentry "Ubuntu, Linux 2.6.32-27-generic (recovery mode)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-27-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.32-27-generic
}
menuentry "Ubuntu, Linux 2.6.32-26-generic" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-26-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-26-generic
}
menuentry "Ubuntu, Linux 2.6.32-26-generic (recovery mode)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-26-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.32-26-generic
}
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.32-27-generic (on /dev/sda3)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux /boot/vmlinuz-2.6.32-27-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-27-generic
}
menuentry "Ubuntu, with Linux 2.6.32-27-generic (recovery mode) (on /dev/sda3)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux /boot/vmlinuz-2.6.32-27-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro single
initrd /boot/initrd.img-2.6.32-27-generic
}
menuentry "Ubuntu, with Linux 2.6.32-26-generic (on /dev/sda3)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux /boot/vmlinuz-2.6.32-26-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-26-generic
}
menuentry "Ubuntu, with Linux 2.6.32-26-generic (recovery mode) (on /dev/sda3)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux /boot/vmlinuz-2.6.32-26-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro single
initrd /boot/initrd.img-2.6.32-26-generic
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

============================= sda1/Wubi/etc/fstab: =============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0

================= sda1/Wubi: Location of files loaded by Grub: =================


20.0GB: boot/grub/grub.cfg
26.9GB: boot/initrd.img-2.6.32-26-generic
25.0GB: boot/initrd.img-2.6.32-27-generic
24.8GB: boot/vmlinuz-2.6.32-26-generic
24.1GB: boot/vmlinuz-2.6.32-27-generic
25.0GB: initrd.img
26.9GB: initrd.img.old
24.1GB: vmlinuz
24.8GB: vmlinuz.old

=========================== sda3/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=1280x1024
set gfxpayload=1920x1200
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-27-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux /boot/vmlinuz-2.6.32-27-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-27-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
echo 'Loading Linux 2.6.32-27-generic ...'
linux /boot/vmlinuz-2.6.32-27-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-27-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-26-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux /boot/vmlinuz-2.6.32-26-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-26-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
echo 'Loading Linux 2.6.32-26-generic ...'
linux /boot/vmlinuz-2.6.32-26-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-26-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

=============================== sda3/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0


# root was on /dev/sda3 when wubi migrated
UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f / ext4 errors=remount-ro 0 1

=================== sda3: Location of files loaded by Grub: ===================


307.9GB: boot/grub/grub.cfg
308.8GB: boot/initrd.img-2.6.32-26-generic
309.5GB: boot/initrd.img-2.6.32-27-generic
308.9GB: boot/vmlinuz-2.6.32-26-generic
308.9GB: boot/vmlinuz-2.6.32-27-generic
309.5GB: initrd.img
308.8GB: initrd.img.old
308.9GB: vmlinuz
308.9GB: vmlinuz.old

wilee-nilee
January 10th, 2011, 03:19 AM
Hi bcbc, thank you for the support you have been providing. I have the same issue, unable to boot into migrated partition. This is what I have. please help!


Boot Info Script 0.55 dated February 15th, 2010

============================= Boot Info Summary: ==============================

=> Windows is installed in the MBR of /dev/sda

sda1: __________________________________________________ _______________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/grldr /wubildr.mbr /ubuntu/winboot/wubildr.mbr
/wubildr /ubuntu/winboot/wubildr
/ubuntu/disks/root.disk /ubuntu/disks/swap.disk

sda1/Wubi: __________________________________________________ _______________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab

sda2: __________________________________________________ _______________________

File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /Windows/System32/winload.exe

sda3: __________________________________________________ _______________________

File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab

=========================== Drive/Partition Info: =============================

Drive: sda ___________________ __________________________________________________ ___

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition Boot Start End Size Id System

/dev/sda1 * 2,048 577,847,279 577,845,232 7 HPFS/NTFS
/dev/sda2 641,230,848 976,771,047 335,540,200 7 HPFS/NTFS
/dev/sda3 577,858,050 641,218,409 63,360,360 83 Linux


blkid -c /dev/null: __________________________________________________ __________

Device UUID TYPE LABEL

/dev/loop0 squashfs
/dev/loop1 16a1bc82-2a35-4146-ae09-8d839efa0235 ext4
/dev/sda1 180E62B40E628B18 ntfs Local Disk
/dev/sda2 38C6A335C6A2F1F4 ntfs
/dev/sda3 4245b981-cb8d-4dfb-9a75-30b4818b938f ext4
/dev/sda: PTTYPE="dos"

============================ "mount | grep ^/dev output: ===========================

Device Mount_Point Type Options

aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)


======================== sda1/Wubi/boot/grub/grub.cfg: ========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=1280x1024
set gfxpayload=1920x1200
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.32-27-generic" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-27-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-27-generic
}
menuentry "Ubuntu, Linux 2.6.32-27-generic (recovery mode)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-27-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.32-27-generic
}
menuentry "Ubuntu, Linux 2.6.32-26-generic" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-26-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-26-generic
}
menuentry "Ubuntu, Linux 2.6.32-26-generic (recovery mode)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-26-generic root=/dev/sda1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.32-26-generic
}
### END /etc/grub.d/10_lupin ###

### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
chainloader +1
}
menuentry "Ubuntu, with Linux 2.6.32-27-generic (on /dev/sda3)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux /boot/vmlinuz-2.6.32-27-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-27-generic
}
menuentry "Ubuntu, with Linux 2.6.32-27-generic (recovery mode) (on /dev/sda3)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux /boot/vmlinuz-2.6.32-27-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro single
initrd /boot/initrd.img-2.6.32-27-generic
}
menuentry "Ubuntu, with Linux 2.6.32-26-generic (on /dev/sda3)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux /boot/vmlinuz-2.6.32-26-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-26-generic
}
menuentry "Ubuntu, with Linux 2.6.32-26-generic (recovery mode) (on /dev/sda3)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux /boot/vmlinuz-2.6.32-26-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro single
initrd /boot/initrd.img-2.6.32-26-generic
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

============================= sda1/Wubi/etc/fstab: =============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0

================= sda1/Wubi: Location of files loaded by Grub: =================


20.0GB: boot/grub/grub.cfg
26.9GB: boot/initrd.img-2.6.32-26-generic
25.0GB: boot/initrd.img-2.6.32-27-generic
24.8GB: boot/vmlinuz-2.6.32-26-generic
24.1GB: boot/vmlinuz-2.6.32-27-generic
25.0GB: initrd.img
26.9GB: initrd.img.old
24.1GB: vmlinuz
24.8GB: vmlinuz.old

=========================== sda3/boot/grub/grub.cfg: ===========================

#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi

function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}

function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=1280x1024
set gfxpayload=1920x1200
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-27-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux /boot/vmlinuz-2.6.32-27-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-27-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-27-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
echo 'Loading Linux 2.6.32-27-generic ...'
linux /boot/vmlinuz-2.6.32-27-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-27-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-26-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux /boot/vmlinuz-2.6.32-26-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap
initrd /boot/initrd.img-2.6.32-26-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-26-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
echo 'Loading Linux 2.6.32-26-generic ...'
linux /boot/vmlinuz-2.6.32-26-generic root=UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-26-generic
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 4245b981-cb8d-4dfb-9a75-30b4818b938f
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 180e62b40e628b18
chainloader +1
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###

=============================== sda3/etc/fstab: ===============================

# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0


# root was on /dev/sda3 when wubi migrated
UUID=4245b981-cb8d-4dfb-9a75-30b4818b938f / ext4 errors=remount-ro 0 1

=================== sda3: Location of files loaded by Grub: ===================


307.9GB: boot/grub/grub.cfg
308.8GB: boot/initrd.img-2.6.32-26-generic
309.5GB: boot/initrd.img-2.6.32-27-generic
308.9GB: boot/vmlinuz-2.6.32-26-generic
308.9GB: boot/vmlinuz-2.6.32-27-generic
309.5GB: initrd.img
308.8GB: initrd.img.old
308.9GB: vmlinuz
308.9GB: vmlinuz.old


Please start your own thread and post the script there, pm me if you need help.:)

bcbc
January 10th, 2011, 03:38 AM
Chauncy22,
It looks like you used my migration script - unlike the OP who used the old one from the wubi guide.

Yours looks OK - but you must have skipped the step to install the bootloader. You can still boot it via the Wubi menu:
1. Boot
2. Select Ubuntu
3. Down arrow until you get to "Ubuntu, with Linux 2.6.32-27-generic (on /dev/sda3)". Then press Enter.

If it doesn't boot report any errors - you might as well report them on the Howto (http://ubuntuforums.org/showthread.php?t=1519354) thread rather than create a new thread or this one (it seems related to my Howto thread from the title but it isn't)

If you are happy with the booting and want to install the grub bootloader, just boot the new install and run:

sudo grub-install /dev/sda

chauncy22
January 10th, 2011, 03:45 AM
Hi bcbc,

The ubuntu is still in the boot menu but I just get an error. There is no bootlaoder for me to boot from. And yes I did skip the last step by not paying close attention.

Please help.

bcbc
January 10th, 2011, 04:08 AM
Hi bcbc,

The ubuntu is still in the boot menu but I just get an error. There is no bootlaoder for me to boot from. And yes I did skip the last step by not paying close attention.

Please help.
Are you saying you can't boot the Wubi install anymore? If you want to try booting the migrated install, then install grub2. Boot from live CD, run:

sudo mount /dev/sda3 /mnt
sudo grub-install --root-directory=/mnt /dev/sda

If you are saying instead that you can boot Wubi but you get errors trying to boot the migrated install, do not install grub2. Boot the Wubi install, and rerun the migration using the script this time and don't skip the bootloader install.