I was hoping that the fix would be easy so I did not go into detail.
I had to install a SATA PCI card in my Gateway in order to use the new 1-Tb hdd. I originally copied the root to the second primary partition on the 1-Tb drive and was able to get it to boot after reinstalling Grub2.
When Windows XP would not boot, I thought there might be a problem with Ubuntu being in a primary partition, so I moved it to sda11, but it was physically located at the beginning of the Extended Partition. After reinstalling Grub2 it booted fine once again. Windows XP would still not run.
So I copied Windows XP to an ATA drive and installed it as the first drive on the Primary controller (0:0).
The two DVD writers, the new SATA writer on (1:0) and the DVD RAM on ATA (1:0) have remained constant throughout the 1-Tb drive installation.
When I boot with the LiveCD, it places the 1-T SATA drive as sdb, however when I boot to Grub2 and do an "ls" it only shows the 1-Tb SATA as HD0 and no other drives.
I tried disconnecting the power on the ATA Windows drive and booting Grub2, but BusyBox came up. The error before it loaded said that the system had timed-out waiting on a device.
Here is the script I was asked to run:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> No boot loader is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #1 for /boot/grub.
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sdb1: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04.1 LTS
Boot files/dirs: /boot/grub/menu.lst /etc/fstab /boot/grub/core.img
sdb3: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdb5: __________________________________________________ _______________________
File system: vfat
Boot sector type: -
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /wubildr.mbr /ubuntu/winboot/wubildr.mbr /wubildr
/ubuntu/winboot/wubildr /ubuntu/disks/root.disk
/ubuntu/disks/home.disk /ubuntu/disks/swap.disk
sdb5/Wubi: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab
sdb6: __________________________________________________ _______________________
File system: vfat
Boot sector type: Fat32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdb7: __________________________________________________ _______________________
File system: vfat
Boot sector type: Fat32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdb8: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb9: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb10: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 163.9 GB, 163928604672 bytes
255 heads, 63 sectors/track, 19929 cylinders, total 320173056 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 320,159,384 320,159,322 7 HPFS/NTFS
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 63 40,965,749 40,965,687 83 Linux
/dev/sdb3 40,965,750 1,953,520,064 1,912,554,315 5 Extended
/dev/sdb5 40,965,813 491,524,739 450,558,927 b W95 FAT32
/dev/sdb6 491,524,803 942,083,729 450,558,927 b W95 FAT32
/dev/sdb7 942,083,793 1,392,642,719 450,558,927 b W95 FAT32
/dev/sdb8 1,392,642,783 1,843,185,644 450,542,862 b W95 FAT32
/dev/sdb9 1,843,185,708 1,949,423,489 106,237,782 83 Linux
/dev/sdb10 * 1,949,423,553 1,953,520,064 4,096,512 82 Linux swap / Solaris
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 19cd5826-6409-4cc3-b5e3-aecc30dd65f6 ext4
/dev/sda1 58DC09B0DC098A08 ntfs
/dev/sda: PTTYPE="dos"
/dev/sdb1 02b582b0-08d6-4b01-8fa5-784494a93066 ext3 ROOT
/dev/sdb10 46ac06b1-b61c-46ac-94fc-8578fb0e3b66 swap
/dev/sdb3: PTTYPE="dos"
/dev/sdb5 1F0D-0F2B vfat DATA-1
/dev/sdb6 3785-5F07 vfat DATA-2
/dev/sdb7 3833-2AF4 vfat
/dev/sdb8 176b1285-993f-485c-89f6-492df9d35c2b ext4 DATA-4
/dev/sdb9 3bb3ad9b-46b3-4e1b-a0dd-8f7b0dfa868c ext3 HOME
/dev/sdb: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr1 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect /NoExecute=OptIn
=========================== sdb1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
#timeout 100
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
## password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=02b582b0-08d6-4b01-8fa5-784494a93066 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=02b582b0-08d6-4b01-8fa5-784494a93066
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=true
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic
uuid 02b582b0-08d6-4b01-8fa5-784494a93066
kernel /boot/vmlinuz-2.6.32-24-generic root=UUID=02b582b0-08d6-4b01-8fa5-784494a93066 ro
initrd /boot/initrd.img-2.6.32-24-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-24-generic (recovery mode)
uuid 02b582b0-08d6-4b01-8fa5-784494a93066
kernel /boot/vmlinuz-2.6.32-24-generic root=UUID=02b582b0-08d6-4b01-8fa5-784494a93066 ro single
initrd /boot/initrd.img-2.6.32-24-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.32-23-generic
uuid 02b582b0-08d6-4b01-8fa5-784494a93066
kernel /boot/vmlinuz-2.6.32-23-generic root=UUID=02b582b0-08d6-4b01-8fa5-784494a93066 ro
initrd /boot/initrd.img-2.6.32-23-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.32-23-generic (recovery mode)
uuid 02b582b0-08d6-4b01-8fa5-784494a93066
kernel /boot/vmlinuz-2.6.32-23-generic root=UUID=02b582b0-08d6-4b01-8fa5-784494a93066 ro single
initrd /boot/initrd.img-2.6.32-23-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.31-20-generic
uuid 02b582b0-08d6-4b01-8fa5-784494a93066
kernel /boot/vmlinuz-2.6.31-20-generic root=UUID=02b582b0-08d6-4b01-8fa5-784494a93066 ro
initrd /boot/initrd.img-2.6.31-20-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.31-20-generic (recovery mode)
uuid 02b582b0-08d6-4b01-8fa5-784494a93066
kernel /boot/vmlinuz-2.6.31-20-generic root=UUID=02b582b0-08d6-4b01-8fa5-784494a93066 ro single
initrd /boot/initrd.img-2.6.31-20-generic
title Ubuntu 10.04.1 LTS, kernel 2.6.28-15-generic
uuid 02b582b0-08d6-4b01-8fa5-784494a93066
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=02b582b0-08d6-4b01-8fa5-784494a93066 ro
initrd /boot/initrd.img-2.6.28-15-generic
quiet
title Ubuntu 10.04.1 LTS, kernel 2.6.28-15-generic (recovery mode)
uuid 02b582b0-08d6-4b01-8fa5-784494a93066
kernel /boot/vmlinuz-2.6.28-15-generic root=UUID=02b582b0-08d6-4b01-8fa5-784494a93066 ro single
initrd /boot/initrd.img-2.6.28-15-generic
title Chainload into GRUB 2
root 02b582b0-08d6-4b01-8fa5-784494a93066
kernel /boot/grub/core.img
title Ubuntu 10.04.1 LTS, memtest86+
uuid 02b582b0-08d6-4b01-8fa5-784494a93066
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Microsoft Windows XP Home Edition
rootnoverify (hd0,0)
savedefault
makeactive
chainloader +1
=============================== sdb1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'vol_id --uuid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sdb1 during installation
UUID=02b582b0-08d6-4b01-8fa5-784494a93066 / ext3 relatime,errors=remount-ro 0 1
# /home was on /dev/sdb5 during installation
UUID=3bb3ad9b-46b3-4e1b-a0dd-8f7b0dfa868c /home ext3 relatime 0 2
# swap was on /dev/sdb6 during installation
UUID=a4f0dfce-6d5c-4fb5-b5b1-b44c360e52f3 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sdb1: Location of files loaded by Grub: ===================
10.1GB: boot/grub/core.img
10.1GB: boot/grub/menu.lst
10.1GB: boot/grub/stage2
10.1GB: boot/initrd.img-2.6.28-15-generic
10.1GB: boot/initrd.img-2.6.31-20-generic
10.1GB: boot/initrd.img-2.6.32-23-generic
10.1GB: boot/initrd.img-2.6.32-24-generic
10.1GB: boot/vmlinuz-2.6.28-15-generic
10.1GB: boot/vmlinuz-2.6.31-20-generic
10.1GB: boot/vmlinuz-2.6.32-23-generic
10.1GB: boot/vmlinuz-2.6.32-24-generic
10.1GB: initrd.img
10.1GB: initrd.img.old
10.1GB: vmlinuz
10.1GB: vmlinuz.old
======================== sdb5/Wubi/boot/grub/grub.cfg: ========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=30
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.32-23-generic" {
insmod fat
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 10d8-132e
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-23-generic root=/dev/sdb1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.32-23-generic
}
menuentry "Ubuntu, Linux 2.6.32-23-generic (recovery mode)" {
insmod fat
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 10d8-132e
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-23-generic root=/dev/sdb1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.32-23-generic
}
menuentry "Ubuntu, Linux 2.6.32-21-generic" {
insmod fat
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 10d8-132e
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-21-generic root=/dev/sdb1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry "Ubuntu, Linux 2.6.32-21-generic (recovery mode)" {
insmod fat
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 10d8-132e
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-21-generic root=/dev/sdb1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set faecf926ecf8de37
chainloader +1
}
menuentry "Windows Recovery Environment (loader) (on /dev/sda2)" {
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 94ceb73eceb71786
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
============================= sdb5/Wubi/etc/fstab: =============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/home.disk /home ext4 loop 0 2
/host/ubuntu/disks/usr.disk /usr ext4 loop 0 2
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
================= sdb5/Wubi: Location of files loaded by Grub: =================
.9GB: boot/grub/grub.cfg
.5GB: boot/initrd.img-2.6.32-21-generic
1.6GB: boot/initrd.img-2.6.32-23-generic
.3GB: boot/vmlinuz-2.6.32-21-generic
1.2GB: boot/vmlinuz-2.6.32-23-generic
1.6GB: initrd.img
.5GB: initrd.img.old
1.2GB: vmlinuz
.3GB: vmlinuz.old
=========================== Unknown MBRs/Boot Sectors/etc =======================
Unknown BootLoader on sdb3
00000000 6b 46 be ea c2 a5 d7 5b 75 81 48 d4 63 90 62 20 |kF.....[u.H.c.b |
00000010 bc 40 1e e9 d4 7a 85 28 bb 10 c7 83 1a 16 73 b7 |.@...z.(......s.|
00000020 94 8a f9 d6 ff d8 f3 79 f1 b8 6f 5c af 29 72 bb |.......y..o\.)r.|
00000030 f9 dc e6 5d 7e 1d 33 92 17 13 85 99 99 b4 f4 ca |...]~.3.........|
00000040 5b db 9f 93 92 69 1f ac ff fb 42 c0 eb 02 0b 40 |[....i....B....@|
00000050 2b 6b a7 e1 e2 29 3d 0c 6e 74 f3 08 e4 55 53 f5 |+k...)=.nt...US.|
00000060 cb 3f fd aa 73 a0 b6 e2 7e 6b 50 b7 39 39 4a 2e |.?..s...~kP.99J.|
00000070 6a 7f e0 ea 88 02 bb 0d 39 32 c6 8c 52 22 97 a2 |j.......92..R"..|
00000080 ab 01 c7 11 11 08 56 53 c0 78 d4 93 90 71 f6 1a |......VS.x...q..|
00000090 74 59 4b 9e 69 f6 43 88 b0 8a 43 79 73 3a e4 49 |tYK.i.C...Cys:.I|
000000a0 00 80 80 c4 d9 72 c8 20 dc e9 99 1d b5 84 df 1b |.....r. ........|
000000b0 1e 5d ad 24 3d e0 82 2c 71 af fd 16 7a 7f fd bf |.].$=..,q...z...|
000000c0 df ea bb 4e 40 02 db 8e 69 49 26 63 aa 0f 12 3c |...N@...iI&c...<|
000000d0 8d 53 2a 77 4a 40 f6 08 b4 a2 e0 41 2a 08 23 84 |.S*wJ@.....A*.#.|
000000e0 99 a1 19 30 14 64 d1 2b c8 5a 5d 24 04 8e 01 88 |...0.d.+.Z]$....|
000000f0 d6 8e 47 4e ef 89 61 8c 66 56 68 cf 8e 62 82 ff |..GN..a.fVh..b..|
00000100 fb 42 c0 e7 03 ca 88 73 58 0d 61 05 81 15 06 eb |.B.....sX.a.....|
00000110 41 97 a5 50 90 61 20 82 86 01 0c ab 32 84 64 c7 |A..P.a .....2.d.|
00000120 5b ce 63 10 a1 0e 20 71 9b b9 90 e4 06 ad 91 96 |[.c... q........|
00000130 e0 aa 10 7e fa b3 5c e1 f9 9b d6 1b f0 7c 32 72 |...~..\......|2r|
00000140 33 2f 0d ed 2b 10 a4 3a 64 e6 95 d2 84 24 05 67 |3/..+..:d....$.g|
00000150 86 1c bc 39 89 55 5c a9 99 31 0b 1a cc 29 49 6d |...9.U\..1...)Im|
00000160 cd 84 46 cb 11 c0 ef 17 3c f0 44 c0 53 b3 a8 c8 |..F.....<.D.S...|
00000170 d0 9e c0 72 64 41 bf 4b 4a 41 c9 c0 e9 08 6a 95 |...rdA.KJA....j.|
00000180 b4 1c 8a 6a 07 a3 ae 85 c1 ec 07 29 65 66 e6 f6 |...j.......)ef..|
00000190 5a 01 e2 4d 21 43 d6 e2 a8 e9 fe f7 ff ff fb ab |Z..M!C..........|
000001a0 0f e0 c6 44 35 50 88 f2 6b cc 5d 0e 38 17 61 70 |...D5P..k.].8.ap|
000001b0 b2 17 7a 37 1a ab ff fb 40 c0 eb 02 09 c8 00 fe |..z7....@.......|
000001c0 ff ff 0b fe ff ff 3f 00 00 00 cf fb da 1a 00 fe |......?.........|
000001d0 ff ff 05 fe ff ff 0e fc da 1a 0e fc da 1a 00 00 |................|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
I'm now guessing that the problem is Windows XP on and old ATA drive, but have no idea how to resolve the issue.
-wade