blind0wl
August 9th, 2010, 02:11 AM
I've had a bit of a search and havent seen much in regards to my issue. I run a Dell e6410 for work purposes, whilst at the office I have an external monitor hooked up to the docking station and I run AWN.
AWN I have had to force onto my laptop monitor (which is what I want) by increasing the values in the width configuration. I believe this is the workaround as both monitors are side by side and so expand the virtual resolution.
However, my issue is when I power down the laptop and take it home...AWN obviously remembers those values as they are hard set, so when I turn the laptop on AWN doesnt show up as it is naturally being forced over the resolution of just the laptop screen. Is there anyway to get around this issue?
Regards
Blindy
AWN I have had to force onto my laptop monitor (which is what I want) by increasing the values in the width configuration. I believe this is the workaround as both monitors are side by side and so expand the virtual resolution.
However, my issue is when I power down the laptop and take it home...AWN obviously remembers those values as they are hard set, so when I turn the laptop on AWN doesnt show up as it is naturally being forced over the resolution of just the laptop screen. Is there anyway to get around this issue?
Regards
Blindy