View Full Version : Writing a shell script
rado_london
March 30th, 2006, 01:19 AM
Hello
I have few headaches with Dapper and the Internet connection. However I found a solution: I have to ifdown and the up on each login. I want to make a script to do that for me on boot up. Can you please help me with it?
Thanks in advance
xaphan
March 30th, 2006, 02:31 AM
Hello,
give this a shot
#!/bin/bash
sudo su
ifdown eth0
ifup eth0
exit
*assuming your network device is eth0
save the script and put it in /etc/init.d
run the following command:
update-rc.d <name-of-your-script> defaults
chmod +x <name-of-your-script>
that should do the trick
rado_london
March 30th, 2006, 02:45 AM
HEy thanks a lot it works. So everytime i switch on the machine it will execute automatically. If so its great.
ANd welcome to our community. This is your first post and you save my life.
Cheers
rado_london
March 30th, 2006, 02:53 AM
Hi again. On the second reboot it didnt work. Now I have other problems. The cpu is running 100% all the time, as well as the machine hangs the switching off.
Any ideas why?
xaphan
March 30th, 2006, 03:34 AM
eek! sorry about that..
next time ill test before i post...
run this command:
update-rc.d -f <name-of-your-script> remove
then make the script:
#!/bin/bash
sudo ifdown eth0
sudo ifup eth0
run these commands:
update-rc.d <name-of-your-script> defaults
chmod +x <name-of-your-script>
still new to shell scripts...
try that. I just tested with success.
rado_london
March 30th, 2006, 03:55 AM
Everything works now. Thanks again.
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.