rlmcclain
July 3rd, 2010, 02:16 AM
I'm running an upgraded 10.04 32bit with and upgraded to grub2 installation. Everything has been fine. Yesterday I updated the system with a group of patches including the a linux upgrade to 2.6.32-23, which requested a reboot. Upon reboot, I received numerous error and X would not start (using a nvidia driver). It appeared that the system was booting using the old grub with a very outdated menu.lst file. I attempted to reinstall / reconfigure grub2 and ended up now with Error 15: file not found. I found this thread and https://wiki.ubuntu.com/Grub2#Err15. I did the steps outlined in the wiki to no avail - still getting the Error 15. Below is the output of the boot_info_script. The report says that core.img is not found. But it is in /boot/grub. I'm at a loss. Any help would be appreciated.
Rich
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on boot drive #2
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
sda1: __________________________________________________ _______________________
File system: ext3
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda1 and
looks at sector 54247519 of the same hard drive for
core.img, but core.img can not be found at this
location.
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/core.img
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb1: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 82.0 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders, total 160086528 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 61,432,559 61,432,497 83 Linux
/dev/sda2 157,099,635 160,071,659 2,972,025 5 Extended
/dev/sda5 157,099,698 160,071,659 2,971,962 82 Linux swap / Solaris
/dev/sda3 61,432,560 157,099,634 95,667,075 83 Linux
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 63 390,716,864 390,716,802 83 Linux
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 d11e0a43-8551-47b9-8bea-d379685d0da4 ext3
/dev/sda2: PTTYPE="dos"
/dev/sda3 5a8ae9cf-f4ba-4785-8770-e6c9b6b47cfe ext3
/dev/sda5 75cb0b2f-3494-4d37-ab71-5012629f4532 swap
/dev/sda: PTTYPE="dos"
/dev/sdb1 f7acbbc0-ccc2-4da8-99f2-0d904b4f5d3c ext3
/dev/sdb: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda1 /mnt ext3 (rw)
/dev /mnt/dev none (rw,bind)
=========================== sda1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(, info grub, update-grub(
# grub-install(, grub-floppy(,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Chainload into GRUB 2
root (hd0,0)
kernel /boot/grub/core.img
title ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
root
title When you have verified GRUB 2 works, you can use this command to
root
title complete the upgrade: upgrade-from-grub-legacy
root
title ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
root
title Ubuntu 10.04 LTS, kernel 2.6.32-23-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.32-23-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.32-23-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.32-23-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.32-23-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
initrd /boot/initrd.img-2.6.32-23-generic
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-17-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.31-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.31-17-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.31-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
initrd /boot/initrd.img-2.6.31-17-generic
title Ubuntu 10.04 LTS, kernel 2.6.28-17-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.28-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.28-17-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.28-17-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.28-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
initrd /boot/initrd.img-2.6.28-17-generic
title Ubuntu 10.04 LTS, kernel 2.6.27-11-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.27-11-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
initrd /boot/initrd.img-2.6.27-11-generic
title Ubuntu 10.04 LTS, kernel 2.6.22-15-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-15-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.22-15-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.22-15-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-15-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
initrd /boot/initrd.img-2.6.22-15-generic
title Ubuntu 10.04 LTS, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
=========================== sda1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux /boot/vmlinuz-2.6.32-23-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.32-23-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
echo 'Loading Linux 2.6.32-23-generic ...'
linux /boot/vmlinuz-2.6.32-23-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-23-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-17-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
echo 'Loading Linux 2.6.31-17-generic ...'
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry 'Ubuntu, with Linux 2.6.28-17-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux /boot/vmlinuz-2.6.28-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.28-17-generic
}
menuentry 'Ubuntu, with Linux 2.6.28-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
echo 'Loading Linux 2.6.28-17-generic ...'
linux /boot/vmlinuz-2.6.28-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.28-17-generic
}
menuentry 'Ubuntu, with Linux 2.6.27-11-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux /boot/vmlinuz-2.6.27-11-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.27-11-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
echo 'Loading Linux 2.6.27-11-generic ...'
linux /boot/vmlinuz-2.6.27-11-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.27-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.22-15-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux /boot/vmlinuz-2.6.22-15-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.22-15-generic
}
menuentry 'Ubuntu, with Linux 2.6.22-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
echo 'Loading Linux 2.6.22-15-generic ...'
linux /boot/vmlinuz-2.6.22-15-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.22-15-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sdb1
UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 / ext3 defaults,errors=remount-ro,relatime 0 1
# /dev/sda1
UUID=f7acbbc0-ccc2-4da8-99f2-0d904b4f5d3c /home ext3 defaults,relatime 0 2
# /dev/sdb5
UUID=75cb0b2f-3494-4d37-ab71-5012629f4532 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec 0 0
//192.168.11.8/share /mnt/kurobox cifs user=rich,password=rlmtux,uid=1000,gid=1000 0 0
=================== sda1: Location of files loaded by Grub: ===================
27.7GB: boot/grub/core.img
27.7GB: boot/grub/grub.cfg
27.6GB: boot/grub/menu.lst
7.0GB: boot/initrd.img-2.6.22-15-generic
6.9GB: boot/initrd.img-2.6.22-15-generic.bak
27.6GB: boot/initrd.img-2.6.27-11-generic
27.6GB: boot/initrd.img-2.6.28-17-generic
27.6GB: boot/initrd.img-2.6.31-17-generic
27.7GB: boot/initrd.img-2.6.32-22-generic
27.6GB: boot/initrd.img-2.6.32-23-generic
1.3GB: boot/vmlinuz-2.6.22-15-generic
27.7GB: boot/vmlinuz-2.6.27-11-generic
27.7GB: boot/vmlinuz-2.6.28-17-generic
27.7GB: boot/vmlinuz-2.6.31-17-generic
27.7GB: boot/vmlinuz-2.6.32-22-generic
27.6GB: boot/vmlinuz-2.6.32-23-generic
27.6GB: initrd.img
27.7GB: initrd.img.old
27.6GB: vmlinuz
27.7GB: vmlinuz.old
Rich
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
=> Grub 0.97 is installed in the MBR of /dev/sdb and looks on boot drive #2
in partition #1 for /boot/grub/stage2 and /boot/grub/menu.lst.
sda1: __________________________________________________ _______________________
File system: ext3
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda1 and
looks at sector 54247519 of the same hard drive for
core.img, but core.img can not be found at this
location.
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/core.img
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb1: __________________________________________________ _______________________
File system: ext3
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 82.0 GB, 81964302336 bytes
255 heads, 63 sectors/track, 9964 cylinders, total 160086528 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 61,432,559 61,432,497 83 Linux
/dev/sda2 157,099,635 160,071,659 2,972,025 5 Extended
/dev/sda5 157,099,698 160,071,659 2,971,962 82 Linux swap / Solaris
/dev/sda3 61,432,560 157,099,634 95,667,075 83 Linux
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 200.0 GB, 200049647616 bytes
255 heads, 63 sectors/track, 24321 cylinders, total 390721968 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 63 390,716,864 390,716,802 83 Linux
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 d11e0a43-8551-47b9-8bea-d379685d0da4 ext3
/dev/sda2: PTTYPE="dos"
/dev/sda3 5a8ae9cf-f4ba-4785-8770-e6c9b6b47cfe ext3
/dev/sda5 75cb0b2f-3494-4d37-ab71-5012629f4532 swap
/dev/sda: PTTYPE="dos"
/dev/sdb1 f7acbbc0-ccc2-4da8-99f2-0d904b4f5d3c ext3
/dev/sdb: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda1 /mnt ext3 (rw)
/dev /mnt/dev none (rw,bind)
=========================== sda1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(, info grub, update-grub(
# grub-install(, grub-floppy(,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 10
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,0)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Chainload into GRUB 2
root (hd0,0)
kernel /boot/grub/core.img
title ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
root
title When you have verified GRUB 2 works, you can use this command to
root
title complete the upgrade: upgrade-from-grub-legacy
root
title ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
root
title Ubuntu 10.04 LTS, kernel 2.6.32-23-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.32-23-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.32-23-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.32-23-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.32-23-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
initrd /boot/initrd.img-2.6.32-23-generic
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-17-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.31-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.31-17-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.31-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
initrd /boot/initrd.img-2.6.31-17-generic
title Ubuntu 10.04 LTS, kernel 2.6.28-17-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.28-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.28-17-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.28-17-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.28-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
initrd /boot/initrd.img-2.6.28-17-generic
title Ubuntu 10.04 LTS, kernel 2.6.27-11-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.27-11-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.27-11-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
initrd /boot/initrd.img-2.6.27-11-generic
title Ubuntu 10.04 LTS, kernel 2.6.22-15-generic
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-15-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.22-15-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.22-15-generic (recovery mode)
root (hd0,0)
kernel /boot/vmlinuz-2.6.22-15-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
initrd /boot/initrd.img-2.6.22-15-generic
title Ubuntu 10.04 LTS, memtest86+
root (hd0,0)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
=========================== sda1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux /boot/vmlinuz-2.6.32-23-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.32-23-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
echo 'Loading Linux 2.6.32-23-generic ...'
linux /boot/vmlinuz-2.6.32-23-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-23-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-17-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
echo 'Loading Linux 2.6.31-17-generic ...'
linux /boot/vmlinuz-2.6.31-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.31-17-generic
}
menuentry 'Ubuntu, with Linux 2.6.28-17-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux /boot/vmlinuz-2.6.28-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.28-17-generic
}
menuentry 'Ubuntu, with Linux 2.6.28-17-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
echo 'Loading Linux 2.6.28-17-generic ...'
linux /boot/vmlinuz-2.6.28-17-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.28-17-generic
}
menuentry 'Ubuntu, with Linux 2.6.27-11-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux /boot/vmlinuz-2.6.27-11-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.27-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.27-11-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
echo 'Loading Linux 2.6.27-11-generic ...'
linux /boot/vmlinuz-2.6.27-11-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.27-11-generic
}
menuentry 'Ubuntu, with Linux 2.6.22-15-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux /boot/vmlinuz-2.6.22-15-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro quiet splash
initrd /boot/initrd.img-2.6.22-15-generic
}
menuentry 'Ubuntu, with Linux 2.6.22-15-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
echo 'Loading Linux 2.6.22-15-generic ...'
linux /boot/vmlinuz-2.6.22-15-generic root=UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.22-15-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,1)'
search --no-floppy --fs-uuid --set d11e0a43-8551-47b9-8bea-d379685d0da4
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sdb1
UUID=d11e0a43-8551-47b9-8bea-d379685d0da4 / ext3 defaults,errors=remount-ro,relatime 0 1
# /dev/sda1
UUID=f7acbbc0-ccc2-4da8-99f2-0d904b4f5d3c /home ext3 defaults,relatime 0 2
# /dev/sdb5
UUID=75cb0b2f-3494-4d37-ab71-5012629f4532 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec 0 0
//192.168.11.8/share /mnt/kurobox cifs user=rich,password=rlmtux,uid=1000,gid=1000 0 0
=================== sda1: Location of files loaded by Grub: ===================
27.7GB: boot/grub/core.img
27.7GB: boot/grub/grub.cfg
27.6GB: boot/grub/menu.lst
7.0GB: boot/initrd.img-2.6.22-15-generic
6.9GB: boot/initrd.img-2.6.22-15-generic.bak
27.6GB: boot/initrd.img-2.6.27-11-generic
27.6GB: boot/initrd.img-2.6.28-17-generic
27.6GB: boot/initrd.img-2.6.31-17-generic
27.7GB: boot/initrd.img-2.6.32-22-generic
27.6GB: boot/initrd.img-2.6.32-23-generic
1.3GB: boot/vmlinuz-2.6.22-15-generic
27.7GB: boot/vmlinuz-2.6.27-11-generic
27.7GB: boot/vmlinuz-2.6.28-17-generic
27.7GB: boot/vmlinuz-2.6.31-17-generic
27.7GB: boot/vmlinuz-2.6.32-22-generic
27.6GB: boot/vmlinuz-2.6.32-23-generic
27.6GB: initrd.img
27.7GB: initrd.img.old
27.6GB: vmlinuz
27.7GB: vmlinuz.old