dankdave
July 2nd, 2010, 03:23 AM
Hi,
I've been running this Dell Studio for a while on dual boot. I have the 64-bit 10.04 Ubuntu with Windows 7 installed on the other partition.
Today when I booted into Windows it wanted to run CHKDSK and I let it run it. I was able to have a session, but when I restarted there was no grub menu, and in fact I wasn't able to load ANY operating system.
The following showed up:
No module name found.
Aborted. Press any key to exit.
Intel UNDI, PXE-2.1 (build 083)
Copyrith (c) 1997-2000
Realtek PCIe 6BE Family Controller Series v2.29 (06/30/09)
PXE-E61: Media Test failure, check cable
PXE-MOF: Exiting PXE ROM
Operating System not found.
I'm able to boot into a liveCD. Running "sudo fdisk -l" provides the following:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe64000e2
Device Boot Start End Blocks Id System
/dev/sda1 1 5 40131 de Dell Utility
/dev/sda2 * 6 1918 15360000 7 HPFS/NTFS
/dev/sda3 1918 11689 78487034+ 7 HPFS/NTFS
/dev/sda4 11689 60802 394499073 5 Extended
/dev/sda5 11689 58809 378488832 83 Linux
/dev/sda6 58809 60802 16009216 82 Linux swap / Solaris
ubuntu@ubuntu:~$
Running the bootinfo script provided at
http://bootinfoscript.sourceforge.net/ (http://bootinfoscript.sourceforge.net)
gives the following:
ubuntu@ubuntu:~/Downloads$ cat RESULTS.txt
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
sda1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Dell Utility: Fat16
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /COMMAND.COM
sda2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /bootmgr /Boot/BCD
sda3: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /Windows/System32/winload.exe
sda4: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda6: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 63 80,324 80,262 de Dell Utility
/dev/sda2 * 80,325 30,800,324 30,720,000 7 HPFS/NTFS
/dev/sda3 30,800,325 187,774,393 156,974,069 7 HPFS/NTFS
/dev/sda4 187,774,974 976,773,119 788,998,146 5 Extended
/dev/sda5 187,774,976 944,752,639 756,977,664 83 Linux
/dev/sda6 944,754,688 976,773,119 32,018,432 82 Linux swap / Solaris
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 3030-3030 vfat DellUtility
/dev/sda2 942E6C132E6BED24 ntfs RECOVERY
/dev/sda3 B4CA6E37CA6DF650 ntfs OS
/dev/sda4: PTTYPE="dos"
/dev/sda5 b447d9f4-e2fc-4f08-835d-f94853ff53f0 ext4
/dev/sda6 469b5f1e-65c8-4ffb-bf6b-89002b17512f swap
/dev/sda: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda5 /media/b447d9f4-e2fc-4f08-835d-f94853ff53f0 ext4 (rw,nosuid,nodev,uhelper=udisks)
/dev/sda3 /media/OS fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_ permissions)
=========================== sda5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
linux /boot/vmlinuz-2.6.32-23-generic root=UUID=b447d9f4-e2fc-4f08-835d-f94853ff53f0 ro quiet splash
initrd /boot/initrd.img-2.6.32-23-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
echo 'Loading Linux 2.6.32-23-generic ...'
linux /boot/vmlinuz-2.6.32-23-generic root=UUID=b447d9f4-e2fc-4f08-835d-f94853ff53f0 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-23-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=b447d9f4-e2fc-4f08-835d-f94853ff53f0 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=b447d9f4-e2fc-4f08-835d-f94853ff53f0 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=b447d9f4-e2fc-4f08-835d-f94853ff53f0 ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
echo 'Loading Linux 2.6.32-21-generic ...'
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=b447d9f4-e2fc-4f08-835d-f94853ff53f0 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda2)" {
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 942e6c132e6bed24
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda5 during installation
UUID=b447d9f4-e2fc-4f08-835d-f94853ff53f0 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=469b5f1e-65c8-4ffb-bf6b-89002b17512f none swap sw 0 0
=================== sda5: Location of files loaded by Grub: ===================
433.4GB: boot/grub/core.img
431.4GB: boot/grub/grub.cfg
433.4GB: boot/initrd.img-2.6.32-21-generic
433.6GB: boot/initrd.img-2.6.32-22-generic
433.7GB: boot/initrd.img-2.6.32-23-generic
433.4GB: boot/vmlinuz-2.6.32-21-generic
99.5GB: boot/vmlinuz-2.6.32-22-generic
122.8GB: boot/vmlinuz-2.6.32-23-generic
433.7GB: initrd.img
433.6GB: initrd.img.old
122.8GB: vmlinuz
99.5GB: vmlinuz.old
ubuntu@ubuntu:~/Downloads$
Any suggestions would be greatly appreciated.
I've been running this Dell Studio for a while on dual boot. I have the 64-bit 10.04 Ubuntu with Windows 7 installed on the other partition.
Today when I booted into Windows it wanted to run CHKDSK and I let it run it. I was able to have a session, but when I restarted there was no grub menu, and in fact I wasn't able to load ANY operating system.
The following showed up:
No module name found.
Aborted. Press any key to exit.
Intel UNDI, PXE-2.1 (build 083)
Copyrith (c) 1997-2000
Realtek PCIe 6BE Family Controller Series v2.29 (06/30/09)
PXE-E61: Media Test failure, check cable
PXE-MOF: Exiting PXE ROM
Operating System not found.
I'm able to boot into a liveCD. Running "sudo fdisk -l" provides the following:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe64000e2
Device Boot Start End Blocks Id System
/dev/sda1 1 5 40131 de Dell Utility
/dev/sda2 * 6 1918 15360000 7 HPFS/NTFS
/dev/sda3 1918 11689 78487034+ 7 HPFS/NTFS
/dev/sda4 11689 60802 394499073 5 Extended
/dev/sda5 11689 58809 378488832 83 Linux
/dev/sda6 58809 60802 16009216 82 Linux swap / Solaris
ubuntu@ubuntu:~$
Running the bootinfo script provided at
http://bootinfoscript.sourceforge.net/ (http://bootinfoscript.sourceforge.net)
gives the following:
ubuntu@ubuntu:~/Downloads$ cat RESULTS.txt
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
sda1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Dell Utility: Fat16
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /COMMAND.COM
sda2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /bootmgr /Boot/BCD
sda3: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /Windows/System32/winload.exe
sda4: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda6: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 63 80,324 80,262 de Dell Utility
/dev/sda2 * 80,325 30,800,324 30,720,000 7 HPFS/NTFS
/dev/sda3 30,800,325 187,774,393 156,974,069 7 HPFS/NTFS
/dev/sda4 187,774,974 976,773,119 788,998,146 5 Extended
/dev/sda5 187,774,976 944,752,639 756,977,664 83 Linux
/dev/sda6 944,754,688 976,773,119 32,018,432 82 Linux swap / Solaris
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 3030-3030 vfat DellUtility
/dev/sda2 942E6C132E6BED24 ntfs RECOVERY
/dev/sda3 B4CA6E37CA6DF650 ntfs OS
/dev/sda4: PTTYPE="dos"
/dev/sda5 b447d9f4-e2fc-4f08-835d-f94853ff53f0 ext4
/dev/sda6 469b5f1e-65c8-4ffb-bf6b-89002b17512f swap
/dev/sda: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sda5 /media/b447d9f4-e2fc-4f08-835d-f94853ff53f0 ext4 (rw,nosuid,nodev,uhelper=udisks)
/dev/sda3 /media/OS fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_ permissions)
=========================== sda5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-23-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
linux /boot/vmlinuz-2.6.32-23-generic root=UUID=b447d9f4-e2fc-4f08-835d-f94853ff53f0 ro quiet splash
initrd /boot/initrd.img-2.6.32-23-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-23-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
echo 'Loading Linux 2.6.32-23-generic ...'
linux /boot/vmlinuz-2.6.32-23-generic root=UUID=b447d9f4-e2fc-4f08-835d-f94853ff53f0 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-23-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=b447d9f4-e2fc-4f08-835d-f94853ff53f0 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=b447d9f4-e2fc-4f08-835d-f94853ff53f0 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=b447d9f4-e2fc-4f08-835d-f94853ff53f0 ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
echo 'Loading Linux 2.6.32-21-generic ...'
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=b447d9f4-e2fc-4f08-835d-f94853ff53f0 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set b447d9f4-e2fc-4f08-835d-f94853ff53f0
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda2)" {
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 942e6c132e6bed24
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda5 during installation
UUID=b447d9f4-e2fc-4f08-835d-f94853ff53f0 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=469b5f1e-65c8-4ffb-bf6b-89002b17512f none swap sw 0 0
=================== sda5: Location of files loaded by Grub: ===================
433.4GB: boot/grub/core.img
431.4GB: boot/grub/grub.cfg
433.4GB: boot/initrd.img-2.6.32-21-generic
433.6GB: boot/initrd.img-2.6.32-22-generic
433.7GB: boot/initrd.img-2.6.32-23-generic
433.4GB: boot/vmlinuz-2.6.32-21-generic
99.5GB: boot/vmlinuz-2.6.32-22-generic
122.8GB: boot/vmlinuz-2.6.32-23-generic
433.7GB: initrd.img
433.6GB: initrd.img.old
122.8GB: vmlinuz
99.5GB: vmlinuz.old
ubuntu@ubuntu:~/Downloads$
Any suggestions would be greatly appreciated.