DarkElysium
June 26th, 2010, 12:01 PM
I supposedly installed ubuntu 10.something into a dual boot with windows vista but now windows vista won't load. It says partition can not be found... and from reading other forums I think it is looking in the wrong place... but i got this document. So any help would be good. Thank you.
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #4 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
=> Windows is installed in the MBR of /dev/sdc
=> Syslinux is installed in the MBR of /dev/sdd
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/wubildr.mbr /ubuntu/winboot/wubildr.mbr /wubildr
/ubuntu/winboot/wubildr /ubuntu/disks/root.disk
/ubuntu/disks/swap.disk
sda1/Wubi: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab
sdb1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdc1: __________________________________________________ _______________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed:
mount: unknown filesystem type ''
sdc2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdc3: __________________________________________________ _______________________
File system: Bios Boot Partition
Boot sector type: -
Boot sector info:
sdc4: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdc5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdd1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Fat32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 2,048 1,953,521,663 1,953,519,616 7 HPFS/NTFS
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 300.1 GB, 300090728448 bytes
255 heads, 63 sectors/track, 36483 cylinders, total 586114704 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 2,048 586,110,975 586,108,928 7 HPFS/NTFS
Drive: sdc ___________________ __________________________________________________ ___
Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdc1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start End Size System
/dev/sdc1 34 262,177 262,144 Microsoft Windows
/dev/sdc2 264,192 973,090,544 972,826,353 Linux or Data
/dev/sdc3 973,090,816 973,092,863 2,048 Bios Boot Partition
/dev/sdc4 973,092,864 1,929,746,431 956,653,568 Linux or Data
/dev/sdc5 1,929,746,432 1,953,523,711 23,777,280 Linux Swap
Drive: sdd ___________________ __________________________________________________ ___
Disk /dev/sdd: 16.4 GB, 16441671680 bytes
154 heads, 40 sectors/track, 5213 cylinders, total 32112640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdd1 * 40 32,112,639 32,112,600 c W95 FAT32 (LBA)
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 b78b4e08-bf79-4841-9e67-956dbb96c2a8 ext4
/dev/sda1 C80884CF0884BE46 ntfs Matrix
/dev/sda: PTTYPE="dos"
/dev/sdb1 F8D89643D8960054 ntfs Nightingale
/dev/sdb: PTTYPE="dos"
/dev/sdc2 A0BAFA1ABAF9ECA2 ntfs Midnight
/dev/sdc4 281a9aef-c68f-4210-9615-11663f737f17 ext4
/dev/sdc5 10b037ee-132d-46c2-ac89-c1675cd6901e swap
/dev/sdc: PTTYPE="gpt"
/dev/sdd1 D8BE-FF88 vfat CORSAIR
/dev/sdd: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sdc4 / ext4 (rw,errors=remount-ro)
/dev/sr0 /media/Napoleon_2 udf (ro,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000, iocharset=utf8,umask=0077)
/dev/sdc2 /media/Midnight fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_ permissions)
/dev/sdd1 /media/CORSAIR vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000, shortname=mixed,dmask=0077,utf8=1,flush)
======================== sda1/Wubi/boot/grub/grub.cfg: ========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.32-21-generic" {
insmod ntfs
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c80884cf0884be46
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-21-generic root=/dev/sdb1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry "Ubuntu, Linux 2.6.32-21-generic (recovery mode)" {
insmod ntfs
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c80884cf0884be46
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-21-generic root=/dev/sdb1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sdb1)" {
insmod ntfs
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c80884cf0884be46
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
============================= sda1/Wubi/etc/fstab: =============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
================= sda1/Wubi: Location of files loaded by Grub: =================
6.6GB: boot/grub/grub.cfg
6.7GB: boot/initrd.img-2.6.32-21-generic
6.6GB: boot/vmlinuz-2.6.32-21-generic
6.7GB: initrd.img
6.6GB: vmlinuz
=========================== sdc4/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=281a9aef-c68f-4210-9615-11663f737f17 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=281a9aef-c68f-4210-9615-11663f737f17 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=281a9aef-c68f-4210-9615-11663f737f17 ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
echo 'Loading Linux 2.6.32-21-generic ...'
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=281a9aef-c68f-4210-9615-11663f737f17 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set c80884cf0884be46
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdc4/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdc4 during installation
UUID=281a9aef-c68f-4210-9615-11663f737f17 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdc5 during installation
UUID=10b037ee-132d-46c2-ac89-c1675cd6901e none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sdc4: Location of files loaded by Grub: ===================
865.5GB: boot/grub/core.img
953.6GB: boot/grub/grub.cfg
865.6GB: boot/initrd.img-2.6.32-21-generic
865.5GB: boot/initrd.img-2.6.32-22-generic
865.5GB: boot/vmlinuz-2.6.32-21-generic
498.6GB: boot/vmlinuz-2.6.32-22-generic
865.5GB: initrd.img
865.6GB: initrd.img.old
498.6GB: vmlinuz
865.5GB: vmlinuz.old
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #4 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
=> Windows is installed in the MBR of /dev/sdc
=> Syslinux is installed in the MBR of /dev/sdd
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/wubildr.mbr /ubuntu/winboot/wubildr.mbr /wubildr
/ubuntu/winboot/wubildr /ubuntu/disks/root.disk
/ubuntu/disks/swap.disk
sda1/Wubi: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab
sdb1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdc1: __________________________________________________ _______________________
File system:
Boot sector type: -
Boot sector info:
Mounting failed:
mount: unknown filesystem type ''
sdc2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sdc3: __________________________________________________ _______________________
File system: Bios Boot Partition
Boot sector type: -
Boot sector info:
sdc4: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdc5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdd1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Fat32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 2,048 1,953,521,663 1,953,519,616 7 HPFS/NTFS
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 300.1 GB, 300090728448 bytes
255 heads, 63 sectors/track, 36483 cylinders, total 586114704 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 2,048 586,110,975 586,108,928 7 HPFS/NTFS
Drive: sdc ___________________ __________________________________________________ ___
Disk /dev/sdc: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdc1 1 1,953,525,167 1,953,525,167 ee GPT
GUID Partition Table detected.
Partition Start End Size System
/dev/sdc1 34 262,177 262,144 Microsoft Windows
/dev/sdc2 264,192 973,090,544 972,826,353 Linux or Data
/dev/sdc3 973,090,816 973,092,863 2,048 Bios Boot Partition
/dev/sdc4 973,092,864 1,929,746,431 956,653,568 Linux or Data
/dev/sdc5 1,929,746,432 1,953,523,711 23,777,280 Linux Swap
Drive: sdd ___________________ __________________________________________________ ___
Disk /dev/sdd: 16.4 GB, 16441671680 bytes
154 heads, 40 sectors/track, 5213 cylinders, total 32112640 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdd1 * 40 32,112,639 32,112,600 c W95 FAT32 (LBA)
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 b78b4e08-bf79-4841-9e67-956dbb96c2a8 ext4
/dev/sda1 C80884CF0884BE46 ntfs Matrix
/dev/sda: PTTYPE="dos"
/dev/sdb1 F8D89643D8960054 ntfs Nightingale
/dev/sdb: PTTYPE="dos"
/dev/sdc2 A0BAFA1ABAF9ECA2 ntfs Midnight
/dev/sdc4 281a9aef-c68f-4210-9615-11663f737f17 ext4
/dev/sdc5 10b037ee-132d-46c2-ac89-c1675cd6901e swap
/dev/sdc: PTTYPE="gpt"
/dev/sdd1 D8BE-FF88 vfat CORSAIR
/dev/sdd: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sdc4 / ext4 (rw,errors=remount-ro)
/dev/sr0 /media/Napoleon_2 udf (ro,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000, iocharset=utf8,umask=0077)
/dev/sdc2 /media/Midnight fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_ permissions)
/dev/sdd1 /media/CORSAIR vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000, shortname=mixed,dmask=0077,utf8=1,flush)
======================== sda1/Wubi/boot/grub/grub.cfg: ========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.32-21-generic" {
insmod ntfs
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c80884cf0884be46
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-21-generic root=/dev/sdb1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry "Ubuntu, Linux 2.6.32-21-generic (recovery mode)" {
insmod ntfs
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c80884cf0884be46
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.32-21-generic root=/dev/sdb1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sdb1)" {
insmod ntfs
set root='(hd1,1)'
search --no-floppy --fs-uuid --set c80884cf0884be46
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
============================= sda1/Wubi/etc/fstab: =============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
================= sda1/Wubi: Location of files loaded by Grub: =================
6.6GB: boot/grub/grub.cfg
6.7GB: boot/initrd.img-2.6.32-21-generic
6.6GB: boot/vmlinuz-2.6.32-21-generic
6.7GB: initrd.img
6.6GB: vmlinuz
=========================== sdc4/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=281a9aef-c68f-4210-9615-11663f737f17 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=281a9aef-c68f-4210-9615-11663f737f17 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=281a9aef-c68f-4210-9615-11663f737f17 ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
echo 'Loading Linux 2.6.32-21-generic ...'
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=281a9aef-c68f-4210-9615-11663f737f17 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd2,4)'
search --no-floppy --fs-uuid --set 281a9aef-c68f-4210-9615-11663f737f17
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set c80884cf0884be46
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdc4/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sdc4 during installation
UUID=281a9aef-c68f-4210-9615-11663f737f17 / ext4 errors=remount-ro 0 1
# swap was on /dev/sdc5 during installation
UUID=10b037ee-132d-46c2-ac89-c1675cd6901e none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sdc4: Location of files loaded by Grub: ===================
865.5GB: boot/grub/core.img
953.6GB: boot/grub/grub.cfg
865.6GB: boot/initrd.img-2.6.32-21-generic
865.5GB: boot/initrd.img-2.6.32-22-generic
865.5GB: boot/vmlinuz-2.6.32-21-generic
498.6GB: boot/vmlinuz-2.6.32-22-generic
865.5GB: initrd.img
865.6GB: initrd.img.old
498.6GB: vmlinuz
865.5GB: vmlinuz.old