DaftPunker
June 25th, 2010, 11:48 PM
I'm using a fresh install of Ubuntu 9.10 x86 (I've just only made all of the updates). What I'm trying to do is a simple multiseat configuration (1 user per video card).
Graphics are working fine. My problem is quite weird: I can't make X to only accept input from a specif mouse/keyboard. So, if I move the mouse of seat1, the cursor will move for all the seats (and vice-versa).
Below, you can see the xorg.conf for 1 of the seats.
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mouse1"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "Device" "/dev/input/event7"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nv"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1280x1024_60.00"
EndSubSection
EndSection
And yes, even if I launch only the above seat showed, the X server will accept input from any mouse/keyboard on the computer.
Anyone has any idea?
(sorry for my bad english)
Graphics are working fine. My problem is quite weird: I can't make X to only accept input from a specif mouse/keyboard. So, if I move the mouse of seat1, the cursor will move for all the seats (and vice-versa).
Below, you can see the xorg.conf for 1 of the seats.
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mouse1"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "Device" "/dev/input/event7"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nv"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1280x1024_60.00"
EndSubSection
EndSection
And yes, even if I launch only the above seat showed, the X server will accept input from any mouse/keyboard on the computer.
Anyone has any idea?
(sorry for my bad english)