nsfx
June 21st, 2010, 07:34 AM
Ever since I upgraded, the touchscreen on my Fujitsu Lifebook P1610 no longer works. On Karmic, it worked out of the box without installing any extra packages.
I see xserver-xorg-input-fpit in Synaptic Package Manager but it conflicts with netbook remix packages for some reason so I haven't tried installing it.
I didn't see anything in dmesg about the touchscreen but there are Xorg errors:
...
(II) config/udev: Adding input device Serial Wacom Tablet (/dev/ttyS0)
(**) Serial Wacom Tablet: Applying InputClass "Wacom serial class"
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.10.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Option "Device" "/dev/ttyS0"
(II) Serial Wacom Tablet: type not specified, assuming 'stylus'.
(II) Serial Wacom Tablet: other types will be automatically added.
(**) Serial Wacom Tablet: always reports core events
(II) Serial Wacom Tablet: hotplugging dependent devices.
(**) Option "Device" "/dev/ttyS0"
(**) Serial Wacom Tablet eraser: always reports core events
(II) XINPUT: Adding extended input device "Serial Wacom Tablet eraser" (type: ERASER)
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
(II) Serial Wacom Tablet eraser: serial tablet id 0x90.
(EE) Couldn't init device "Serial Wacom Tablet eraser"
(II) UnloadModule: "wacom"
(II) Serial Wacom Tablet: hotplugging completed.
(II) XINPUT: Adding extended input device "Serial Wacom Tablet" (type: STYLUS)
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
(WW) Serial Wacom Tablet: Waited too long for answer (failed after 3 tries).
(II) Serial Wacom Tablet: serial tablet id 0x90.
(EE) Couldn't init device "Serial Wacom Tablet"
(II) UnloadModule: "wacom"
(II) Serial Wacom Tablet: hotplugging completed.
(II) XINPUT: Adding extended input device "Serial Wacom Tablet" (type: STYLUS)
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
(WW) Serial Wacom Tablet: Waited too long for answer (failed after 3 tries).
(II) Serial Wacom Tablet: serial tablet id 0x90.
(EE) Couldn't init device "Serial Wacom Tablet"
(II) Serial Wacom Tablet: removing automatically added devices.
(II) UnloadModule: "wacom"
...
I'm not sure if it's supposed to be recognized as a wacom tablet or what, and I'm also not sure how it used to be configured when it worked in Karmic. Any tips to get this working? Thanks.
I see xserver-xorg-input-fpit in Synaptic Package Manager but it conflicts with netbook remix packages for some reason so I haven't tried installing it.
I didn't see anything in dmesg about the touchscreen but there are Xorg errors:
...
(II) config/udev: Adding input device Serial Wacom Tablet (/dev/ttyS0)
(**) Serial Wacom Tablet: Applying InputClass "Wacom serial class"
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
compiled for 1.7.6, module version = 0.10.5
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Option "Device" "/dev/ttyS0"
(II) Serial Wacom Tablet: type not specified, assuming 'stylus'.
(II) Serial Wacom Tablet: other types will be automatically added.
(**) Serial Wacom Tablet: always reports core events
(II) Serial Wacom Tablet: hotplugging dependent devices.
(**) Option "Device" "/dev/ttyS0"
(**) Serial Wacom Tablet eraser: always reports core events
(II) XINPUT: Adding extended input device "Serial Wacom Tablet eraser" (type: ERASER)
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
(II) Serial Wacom Tablet eraser: serial tablet id 0x90.
(EE) Couldn't init device "Serial Wacom Tablet eraser"
(II) UnloadModule: "wacom"
(II) Serial Wacom Tablet: hotplugging completed.
(II) XINPUT: Adding extended input device "Serial Wacom Tablet" (type: STYLUS)
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
(WW) Serial Wacom Tablet: Waited too long for answer (failed after 3 tries).
(II) Serial Wacom Tablet: serial tablet id 0x90.
(EE) Couldn't init device "Serial Wacom Tablet"
(II) UnloadModule: "wacom"
(II) Serial Wacom Tablet: hotplugging completed.
(II) XINPUT: Adding extended input device "Serial Wacom Tablet" (type: STYLUS)
(**) Option "StopBits" "1"
(**) Option "DataBits" "8"
(**) Option "Parity" "None"
(**) Option "Vmin" "1"
(**) Option "Vtime" "10"
(**) Option "FlowControl" "Xoff"
(WW) Serial Wacom Tablet: Waited too long for answer (failed after 3 tries).
(II) Serial Wacom Tablet: serial tablet id 0x90.
(EE) Couldn't init device "Serial Wacom Tablet"
(II) Serial Wacom Tablet: removing automatically added devices.
(II) UnloadModule: "wacom"
...
I'm not sure if it's supposed to be recognized as a wacom tablet or what, and I'm also not sure how it used to be configured when it worked in Karmic. Any tips to get this working? Thanks.