wrightsimmo80
June 8th, 2010, 02:26 AM
When I try to boot into windows through grub it just returns to the grub menu.
also system recovery options from bios just end up in grub screen too.
here is boot script.
From reading forums I think I need to get grub out of windows partition but I don't know how
Any ideas greatly appreciated.
cheers
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda1 and
looks at sector 550147858 of the same hard drive for
core.img, core.img is at this location on /dev/sda and
looks on partition #9 for /boot/grub. No errors found
in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /boot/BCD /Windows/System32/winload.exe
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/core.img
sda6: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: According to the info in the boot sector, sda6 starts
at sector 311. But according to the info from fdisk,
sda6 starts at sector 365125632.
Operating System: Windows Vista
Boot files/dirs: /Windows/System32/winload.exe
sda7: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda8: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda9: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda10: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /bootmgr
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 400.1 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders, total 781422768 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 233,617,229 233,617,167 7 HPFS/NTFS
/dev/sda2 233,617,230 757,994,894 524,377,665 5 Extended
/dev/sda5 233,617,293 365,125,319 131,508,027 83 Linux
/dev/sda6 365,125,632 549,084,114 183,958,483 7 HPFS/NTFS
/dev/sda7 729,865,143 740,050,289 10,185,147 82 Linux swap / Solaris
/dev/sda8 740,050,353 757,994,894 17,944,542 82 Linux swap / Solaris
/dev/sda9 549,085,698 722,410,919 173,325,222 83 Linux
/dev/sda10 722,410,983 729,865,079 7,454,097 82 Linux swap / Solaris
/dev/sda3 758,005,760 781,416,447 23,410,688 7 HPFS/NTFS
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/sda10 a19162fa-d817-417c-b043-5c25bebc8f24 swap
/dev/sda1 163AD1B13AD18DDD ntfs
/dev/sda2: PTTYPE="dos"
/dev/sda3 1C306F0C306EEC68 ntfs RECOVERY
/dev/sda5 141d6948-3fa3-4dad-996d-c950fe939903 ext4
/dev/sda6 583229C93229AD46 ntfs
/dev/sda7 0832728d-768f-4f61-8e33-decc46e3a794 swap
/dev/sda8 5bf1db98-5975-4433-a03d-3cae5c0733ae swap
/dev/sda9 544fb618-8074-4c8c-9ee0-c11fc511a3c6 ext4
/dev/sda: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda5 / ext4 (rw,errors=remount-ro)
=========================== sda5/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 4
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=141d6948-3fa3-4dad-996d-c950fe939903
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
uuid 141d6948-3fa3-4dad-996d-c950fe939903
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode)
uuid 141d6948-3fa3-4dad-996d-c950fe939903
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro single
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-14-generic
uuid 141d6948-3fa3-4dad-996d-c950fe939903
kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-14-generic (recovery mode)
uuid 141d6948-3fa3-4dad-996d-c950fe939903
kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro single
initrd /boot/initrd.img-2.6.31-14-generic
title Ubuntu 10.04 LTS, memtest86+
uuid 141d6948-3fa3-4dad-996d-c950fe939903
kernel /boot/memtest86+.bin
### END DEBIAN AUTOMAGIC KERNELS LIST
=========================== sda5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=0
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro splash splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro single splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-14-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro splash splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-14-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
echo 'Loading Linux 2.6.31-14-generic ...'
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro single splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 163ad1b13ad18ddd
chainloader +1
}
menuentry "Windows Vista (loader) (on /dev/sda3)" {
insmod ntfs
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 1c306f0c306eec68
chainloader +1
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (on /dev/sda9)" {
insmod ext2
set root='(hd0,9)'
search --no-floppy --fs-uuid --set 544fb618-8074-4c8c-9ee0-c11fc511a3c6
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=544fb618-8074-4c8c-9ee0-c11fc511a3c6 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode) (on /dev/sda9)" {
insmod ext2
set root='(hd0,9)'
search --no-floppy --fs-uuid --set 544fb618-8074-4c8c-9ee0-c11fc511a3c6
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=544fb618-8074-4c8c-9ee0-c11fc511a3c6 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
UUID=141d6948-3fa3-4dad-996d-c950fe939903 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=5bf1db98-5975-4433-a03d-3cae5c0733ae none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda5: Location of files loaded by Grub: ===================
119.8GB: boot/grub/core.img
126.6GB: boot/grub/grub.cfg
120.4GB: boot/grub/menu.lst
120.4GB: boot/initrd.img-2.6.31-14-generic
124.0GB: boot/initrd.img-2.6.32-22-generic
120.1GB: boot/vmlinuz-2.6.31-14-generic
121.7GB: boot/vmlinuz-2.6.32-22-generic
124.0GB: initrd.img
120.4GB: initrd.img.old
121.7GB: vmlinuz
120.1GB: vmlinuz.old
=========================== sda9/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set 544fb618-8074-4c8c-9ee0-c11fc511a3c6
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set 544fb618-8074-4c8c-9ee0-c11fc511a3c6
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=544fb618-8074-4c8c-9ee0-c11fc511a3c6 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set 544fb618-8074-4c8c-9ee0-c11fc511a3c6
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=544fb618-8074-4c8c-9ee0-c11fc511a3c6 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 163ad1b13ad18ddd
chainloader +1
}
menuentry "Windows Vista (loader) (on /dev/sda3)" {
insmod ntfs
set root=(hd0,3)
search --no-floppy --fs-uuid --set 1c306f0c306eec68
chainloader +1
}
menuentry "Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (on /dev/sda5)" {
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry "Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro single
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry "Ubuntu 10.04 LTS, kernel 2.6.31-14-generic (on /dev/sda5)" {
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu 10.04 LTS, kernel 2.6.31-14-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu 10.04 LTS, memtest86+ (on /dev/sda5)" {
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux /boot/memtest86+.bin
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda9/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda9 during installation
UUID=544fb618-8074-4c8c-9ee0-c11fc511a3c6 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda10 during installation
UUID=a19162fa-d817-417c-b043-5c25bebc8f24 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda9: Location of files loaded by Grub: ===================
281.6GB: boot/grub/core.img
284.3GB: boot/grub/grub.cfg
281.6GB: boot/initrd.img-2.6.31-14-generic
281.6GB: boot/vmlinuz-2.6.31-14-generic
281.6GB: initrd.img
281.6GB: vmlinuz
also system recovery options from bios just end up in grub screen too.
here is boot script.
From reading forums I think I need to get grub out of windows partition but I don't know how
Any ideas greatly appreciated.
cheers
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Windows is installed in the MBR of /dev/sda
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda1 and
looks at sector 550147858 of the same hard drive for
core.img, core.img is at this location on /dev/sda and
looks on partition #9 for /boot/grub. No errors found
in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /boot/BCD /Windows/System32/winload.exe
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/core.img
sda6: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: According to the info in the boot sector, sda6 starts
at sector 311. But according to the info from fdisk,
sda6 starts at sector 365125632.
Operating System: Windows Vista
Boot files/dirs: /Windows/System32/winload.exe
sda7: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda8: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda9: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda10: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda3: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /bootmgr
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 400.1 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders, total 781422768 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 233,617,229 233,617,167 7 HPFS/NTFS
/dev/sda2 233,617,230 757,994,894 524,377,665 5 Extended
/dev/sda5 233,617,293 365,125,319 131,508,027 83 Linux
/dev/sda6 365,125,632 549,084,114 183,958,483 7 HPFS/NTFS
/dev/sda7 729,865,143 740,050,289 10,185,147 82 Linux swap / Solaris
/dev/sda8 740,050,353 757,994,894 17,944,542 82 Linux swap / Solaris
/dev/sda9 549,085,698 722,410,919 173,325,222 83 Linux
/dev/sda10 722,410,983 729,865,079 7,454,097 82 Linux swap / Solaris
/dev/sda3 758,005,760 781,416,447 23,410,688 7 HPFS/NTFS
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/sda10 a19162fa-d817-417c-b043-5c25bebc8f24 swap
/dev/sda1 163AD1B13AD18DDD ntfs
/dev/sda2: PTTYPE="dos"
/dev/sda3 1C306F0C306EEC68 ntfs RECOVERY
/dev/sda5 141d6948-3fa3-4dad-996d-c950fe939903 ext4
/dev/sda6 583229C93229AD46 ntfs
/dev/sda7 0832728d-768f-4f61-8e33-decc46e3a794 swap
/dev/sda8 5bf1db98-5975-4433-a03d-3cae5c0733ae swap
/dev/sda9 544fb618-8074-4c8c-9ee0-c11fc511a3c6 ext4
/dev/sda: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda5 / ext4 (rw,errors=remount-ro)
=========================== sda5/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 4
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=141d6948-3fa3-4dad-996d-c950fe939903
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
uuid 141d6948-3fa3-4dad-996d-c950fe939903
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode)
uuid 141d6948-3fa3-4dad-996d-c950fe939903
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro single
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-14-generic
uuid 141d6948-3fa3-4dad-996d-c950fe939903
kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-14-generic (recovery mode)
uuid 141d6948-3fa3-4dad-996d-c950fe939903
kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro single
initrd /boot/initrd.img-2.6.31-14-generic
title Ubuntu 10.04 LTS, memtest86+
uuid 141d6948-3fa3-4dad-996d-c950fe939903
kernel /boot/memtest86+.bin
### END DEBIAN AUTOMAGIC KERNELS LIST
=========================== sda5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=0
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro splash splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro single splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-14-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro splash splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-14-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
echo 'Loading Linux 2.6.31-14-generic ...'
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro single splash
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 163ad1b13ad18ddd
chainloader +1
}
menuentry "Windows Vista (loader) (on /dev/sda3)" {
insmod ntfs
set root='(hd0,3)'
search --no-floppy --fs-uuid --set 1c306f0c306eec68
chainloader +1
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (on /dev/sda9)" {
insmod ext2
set root='(hd0,9)'
search --no-floppy --fs-uuid --set 544fb618-8074-4c8c-9ee0-c11fc511a3c6
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=544fb618-8074-4c8c-9ee0-c11fc511a3c6 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode) (on /dev/sda9)" {
insmod ext2
set root='(hd0,9)'
search --no-floppy --fs-uuid --set 544fb618-8074-4c8c-9ee0-c11fc511a3c6
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=544fb618-8074-4c8c-9ee0-c11fc511a3c6 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
UUID=141d6948-3fa3-4dad-996d-c950fe939903 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=5bf1db98-5975-4433-a03d-3cae5c0733ae none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda5: Location of files loaded by Grub: ===================
119.8GB: boot/grub/core.img
126.6GB: boot/grub/grub.cfg
120.4GB: boot/grub/menu.lst
120.4GB: boot/initrd.img-2.6.31-14-generic
124.0GB: boot/initrd.img-2.6.32-22-generic
120.1GB: boot/vmlinuz-2.6.31-14-generic
121.7GB: boot/vmlinuz-2.6.32-22-generic
124.0GB: initrd.img
120.4GB: initrd.img.old
121.7GB: vmlinuz
120.1GB: vmlinuz.old
=========================== sda9/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set 544fb618-8074-4c8c-9ee0-c11fc511a3c6
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set 544fb618-8074-4c8c-9ee0-c11fc511a3c6
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=544fb618-8074-4c8c-9ee0-c11fc511a3c6 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,9)
search --no-floppy --fs-uuid --set 544fb618-8074-4c8c-9ee0-c11fc511a3c6
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=544fb618-8074-4c8c-9ee0-c11fc511a3c6 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Vista (loader) (on /dev/sda1)" {
insmod ntfs
set root=(hd0,1)
search --no-floppy --fs-uuid --set 163ad1b13ad18ddd
chainloader +1
}
menuentry "Windows Vista (loader) (on /dev/sda3)" {
insmod ntfs
set root=(hd0,3)
search --no-floppy --fs-uuid --set 1c306f0c306eec68
chainloader +1
}
menuentry "Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (on /dev/sda5)" {
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry "Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro single
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry "Ubuntu 10.04 LTS, kernel 2.6.31-14-generic (on /dev/sda5)" {
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu 10.04 LTS, kernel 2.6.31-14-generic (recovery mode) (on /dev/sda5)" {
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=141d6948-3fa3-4dad-996d-c950fe939903 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu 10.04 LTS, memtest86+ (on /dev/sda5)" {
insmod ext2
set root=(hd0,5)
search --no-floppy --fs-uuid --set 141d6948-3fa3-4dad-996d-c950fe939903
linux /boot/memtest86+.bin
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda9/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda9 during installation
UUID=544fb618-8074-4c8c-9ee0-c11fc511a3c6 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda10 during installation
UUID=a19162fa-d817-417c-b043-5c25bebc8f24 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda9: Location of files loaded by Grub: ===================
281.6GB: boot/grub/core.img
284.3GB: boot/grub/grub.cfg
281.6GB: boot/initrd.img-2.6.31-14-generic
281.6GB: boot/vmlinuz-2.6.31-14-generic
281.6GB: initrd.img
281.6GB: vmlinuz