cap10xb1s
June 7th, 2010, 09:14 AM
I have tried various things suggested on Ubuntu Forums but still cannot boot into Windows XP following uograde from karmic to lucid.
It comes up on the grub list at the start but when I select it I just get a flashing cursor. Dont know grub well at all so would appreciate some diagnostic advice and guidance
Below is the results I get from a boot info script
Brendan
----------------------
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #1 for /boot/grub.
sda1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda1 and
looks at sector 28491847 of the same hard drive for
core.img, but core.img can not be found at this
location. No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sdb1: __________________________________________________ _______________________
File system: ext3
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sdb1 and
looks at sector 28475455 of the same hard drive for
core.img, but core.img can not be found at this
location.
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/core.img
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 250.0 GB, 250000000000 bytes
255 heads, 63 sectors/track, 30394 cylinders, total 488281250 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 488,279,609 488,279,547 c W95 FAT32 (LBA)
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 250.0 GB, 250000000000 bytes
255 heads, 63 sectors/track, 30394 cylinders, total 488281250 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 63 488,279,609 488,279,547 83 Linux
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/sda1 1047-19FD vfat
/dev/sda: PTTYPE="dos"
/dev/sdb1 7174fee4-af05-44ea-a7a4-a5b43d834200 ext3
/dev/sdb: PTTYPE="dos"
error: /dev/sdc: No medium found
error: /dev/sdd: No medium found
error: /dev/sde: No medium found
error: /dev/sdf: No medium found
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sdb1 / ext3 (rw,errors=remount-ro)
/dev/sda1 /media/1047-19FD vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000, shortname=mixed,dmask=0077,utf8=1,flush)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows XP Media Center Edition" /noexecute=optin /fastdetect
=========================== sdb1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=7174fee4-af05-44ea-a7a4-a5b43d834200
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
uuid 7174fee4-af05-44ea-a7a4-a5b43d834200
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode)
uuid 7174fee4-af05-44ea-a7a4-a5b43d834200
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro single
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-20-generic
uuid 7174fee4-af05-44ea-a7a4-a5b43d834200
kernel /boot/vmlinuz-2.6.31-20-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro quiet splash
initrd /boot/initrd.img-2.6.31-20-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-20-generic (recovery mode)
uuid 7174fee4-af05-44ea-a7a4-a5b43d834200
kernel /boot/vmlinuz-2.6.31-20-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro single
initrd /boot/initrd.img-2.6.31-20-generic
title Chainload into GRUB 2
root 7174fee4-af05-44ea-a7a4-a5b43d834200
kernel /boot/grub/core.img
title Ubuntu 10.04 LTS, memtest86+
uuid 7174fee4-af05-44ea-a7a4-a5b43d834200
kernel /boot/memtest86+.bin
### END DEBIAN AUTOMAGIC KERNELS LIST
=========================== sdb1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-20-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
linux /boot/vmlinuz-2.6.31-20-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro quiet splash
initrd /boot/initrd.img-2.6.31-20-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
echo 'Loading Linux 2.6.31-20-generic ...'
linux /boot/vmlinuz-2.6.31-20-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.31-20-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows XP Media Center Edition (on /dev/sda1)" {
insmod fat
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 1047-19fd
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sdb1 during installation
UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 / ext3 errors=remount-ro 0 1
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sdb1: Location of files loaded by Grub: ===================
14.5GB: boot/grub/core.img
14.5GB: boot/grub/grub.cfg
14.5GB: boot/grub/menu.lst
14.5GB: boot/initrd.img-2.6.31-20-generic
14.5GB: boot/initrd.img-2.6.32-22-generic
14.5GB: boot/vmlinuz-2.6.31-20-generic
14.5GB: boot/vmlinuz-2.6.32-22-generic
14.5GB: initrd.img
14.5GB: initrd.img.old
14.5GB: vmlinuz
14.5GB: vmlinuz.old
=======Devices which don't seem to have a corresponding hard drive==============
sdc sdd sde sdf
It comes up on the grub list at the start but when I select it I just get a flashing cursor. Dont know grub well at all so would appreciate some diagnostic advice and guidance
Below is the results I get from a boot info script
Brendan
----------------------
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #1 for /boot/grub.
sda1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda1 and
looks at sector 28491847 of the same hard drive for
core.img, but core.img can not be found at this
location. No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sdb1: __________________________________________________ _______________________
File system: ext3
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sdb1 and
looks at sector 28475455 of the same hard drive for
core.img, but core.img can not be found at this
location.
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/core.img
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 250.0 GB, 250000000000 bytes
255 heads, 63 sectors/track, 30394 cylinders, total 488281250 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 488,279,609 488,279,547 c W95 FAT32 (LBA)
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 250.0 GB, 250000000000 bytes
255 heads, 63 sectors/track, 30394 cylinders, total 488281250 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 63 488,279,609 488,279,547 83 Linux
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/sda1 1047-19FD vfat
/dev/sda: PTTYPE="dos"
/dev/sdb1 7174fee4-af05-44ea-a7a4-a5b43d834200 ext3
/dev/sdb: PTTYPE="dos"
error: /dev/sdc: No medium found
error: /dev/sdd: No medium found
error: /dev/sde: No medium found
error: /dev/sdf: No medium found
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sdb1 / ext3 (rw,errors=remount-ro)
/dev/sda1 /media/1047-19FD vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000, shortname=mixed,dmask=0077,utf8=1,flush)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Windows XP Media Center Edition" /noexecute=optin /fastdetect
=========================== sdb1/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=7174fee4-af05-44ea-a7a4-a5b43d834200
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
uuid 7174fee4-af05-44ea-a7a4-a5b43d834200
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode)
uuid 7174fee4-af05-44ea-a7a4-a5b43d834200
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro single
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-20-generic
uuid 7174fee4-af05-44ea-a7a4-a5b43d834200
kernel /boot/vmlinuz-2.6.31-20-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro quiet splash
initrd /boot/initrd.img-2.6.31-20-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-20-generic (recovery mode)
uuid 7174fee4-af05-44ea-a7a4-a5b43d834200
kernel /boot/vmlinuz-2.6.31-20-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro single
initrd /boot/initrd.img-2.6.31-20-generic
title Chainload into GRUB 2
root 7174fee4-af05-44ea-a7a4-a5b43d834200
kernel /boot/grub/core.img
title Ubuntu 10.04 LTS, memtest86+
uuid 7174fee4-af05-44ea-a7a4-a5b43d834200
kernel /boot/memtest86+.bin
### END DEBIAN AUTOMAGIC KERNELS LIST
=========================== sdb1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-20-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
linux /boot/vmlinuz-2.6.31-20-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro quiet splash
initrd /boot/initrd.img-2.6.31-20-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
echo 'Loading Linux 2.6.31-20-generic ...'
linux /boot/vmlinuz-2.6.31-20-generic root=UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.31-20-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd1,1)'
search --no-floppy --fs-uuid --set 7174fee4-af05-44ea-a7a4-a5b43d834200
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows XP Media Center Edition (on /dev/sda1)" {
insmod fat
set root='(hd0,1)'
search --no-floppy --fs-uuid --set 1047-19fd
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sdb1 during installation
UUID=7174fee4-af05-44ea-a7a4-a5b43d834200 / ext3 errors=remount-ro 0 1
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sdb1: Location of files loaded by Grub: ===================
14.5GB: boot/grub/core.img
14.5GB: boot/grub/grub.cfg
14.5GB: boot/grub/menu.lst
14.5GB: boot/initrd.img-2.6.31-20-generic
14.5GB: boot/initrd.img-2.6.32-22-generic
14.5GB: boot/vmlinuz-2.6.31-20-generic
14.5GB: boot/vmlinuz-2.6.32-22-generic
14.5GB: initrd.img
14.5GB: initrd.img.old
14.5GB: vmlinuz
14.5GB: vmlinuz.old
=======Devices which don't seem to have a corresponding hard drive==============
sdc sdd sde sdf