PDA

View Full Version : [ubuntu] Grub 2 doesn't load



bfrosty
June 2nd, 2010, 07:02 AM
Hi,

I recently started with a fresh 10.04 server install. The install completed okay and I was able to boot but whenever I shutdown completely:

sudo shutdown -P now

and restart, I can no longer boot - grub 2 doesn't show up, I just get a blinking cursor, then the signal to the monitor cuts out. I tried the installation a second time, and the same thing happens. I can only open a shell using the installation cd.

Any help would be very appreciated.

If it helps, my specs are as follows:

badboy
description: Mini Tower Computer
product: Dell DE051
vendor: Dell Computer Corporation
serial: 5MWYJ1S
width: 32 bits
capabilities: smbios-2.3 dmi-2.3 smp-1.4 smp
configuration: administrator_password=enabled boot=hardware-failure-fw chassis=mini-tower cpus=1 power-on_password=enabled uuid=44454C4C-4D00-1057-8059-B5C04F4A3153
*-core
description: Motherboard
product: 0WF887
vendor: Dell Computer Corp.
*-firmware
description: BIOS
vendor: Dell Computer Corporation
physical id: 0
version: A01 (01/03/2006)
size: 64KiB
capacity: 448KiB
capabilities: pci pnp apm upgrade shadowing escd cdboot bootselect edd int13floppytoshiba int5printscreen int9keyboard int14serial int17printer acpi usb ls120boot biosbootspecification netboot
*-cpu
description: CPU
product: Intel(R) Pentium(R) 4 CPU 2.80GHz
vendor: Intel Corp.
physical id: 400
bus info: cpu@0
version: 15.4.1
serial: 0000-0F41-0000-0000-0000-0000
slot: Microprocessor
size: 2800MHz
capacity: 3600MHz
width: 32 bits
clock: 533MHz
capabilities: boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe constant_tsc up pebs bts pni dtes64 monitor ds_cpl cid xtpr
configuration: id=0
*-cache:0
description: L1 cache
physical id: 700
size: 8KiB
capacity: 16KiB
capabilities: internal write-back data
*-cache:1
description: L2 cache
physical id: 701
size: 1MiB
capacity: 1MiB
capabilities: internal varies unified
*-memory
description: System Memory
physical id: 1000
slot: System board or motherboard
size: 512MiB
*-bank:0
description: DIMM SDRAM Synchronous 266 MHz (3.8 ns)
physical id: 0
slot: DIMM_1
size: 256MiB
width: 64 bits
clock: 266MHz (3.8ns)
*-bank:1
description: DIMM SDRAM Synchronous 266 MHz (3.8 ns)
physical id: 1
slot: DIMM_2
size: 256MiB
width: 64 bits
clock: 266MHz (3.8ns)
*-pci
description: Host bridge
product: 82865G/PE/P DRAM Controller/Host-Hub Interface
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 02
width: 32 bits
clock: 33MHz
configuration: driver=agpgart-intel
resources: irq:0 memory:f0000000-f7ffffff(prefetchable)
*-display
description: VGA compatible controller
product: 82865G Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:16 memory:e8000000-efffffff(prefetchable) memory:feb80000-febfffff ioport:ed98(size=8)
*-generic UNCLAIMED
description: System peripheral
product: 82865G/PE/P Processor to I/O Memory Interface
vendor: Intel Corporation
physical id: 6
bus info: pci@0000:00:06.0
version: 02
width: 32 bits
clock: 33MHz
configuration: latency=0
resources: memory:fecf0000-fecf0fff
*-usb:0
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1
vendor: Intel Corporation
physical id: 1d
bus info: pci@0000:00:1d.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:16 ioport:ff80(size=32)
*-usb:1
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2
vendor: Intel Corporation
physical id: 1d.1
bus info: pci@0000:00:1d.1
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:19 ioport:ff60(size=32)
*-usb:2
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4
vendor: Intel Corporation
physical id: 1d.3
bus info: pci@0000:00:1d.3
version: 02
width: 32 bits
clock: 33MHz
capabilities: bus_master
configuration: driver=uhci_hcd latency=0
resources: irq:16 ioport:ff20(size=32)
*-usb:3
description: USB Controller
product: 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
vendor: Intel Corporation
physical id: 1d.7
bus info: pci@0000:00:1d.7
version: 02
width: 32 bits
clock: 33MHz
capabilities: pm debug bus_master cap_list
configuration: driver=ehci_hcd latency=0
resources: irq:23 memory:ffa80800-ffa80bff
*-pci
description: PCI bridge
product: 82801 PCI Bridge
vendor: Intel Corporation
physical id: 1e
bus info: pci@0000:00:1e.0
version: c2
width: 32 bits
clock: 33MHz
capabilities: pci bus_master
resources: ioport:d000(size=4096) memory:fea00000-feafffff
*-network
description: Ethernet interface
product: 82562EZ 10/100 Ethernet Controller
vendor: Intel Corporation
physical id: 8
bus info: pci@0000:01:08.0
logical name: eth0
version: 02
serial: 00:16:76:2f:fe:96
size: 100MB/s
capacity: 100MB/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=full firmware=N/A ip=10.1.1.69 latency=64 link=yes maxlatency=56 mingnt=8 multicast=yes port=MII speed=100MB/s
resources: irq:20 memory:feaff000-feafffff ioport:df40(size=64)
*-isa
description: ISA bridge
product: 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: isa bus_master
configuration: latency=0
*-ide
description: IDE interface
product: 82801EB/ER (ICH5/ICH5R) IDE Controller
vendor: Intel Corporation
physical id: 1f.1
bus info: pci@0000:00:1f.1
logical name: scsi0
logical name: scsi1
version: 02
width: 32 bits
clock: 33MHz
capabilities: ide bus_master emulated
configuration: driver=ata_piix latency=0
resources: irq:18 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ffa0(size=16) memory:feb7fc00-feb7ffff
*-disk
description: ATA Disk
product: ST380023A
vendor: Seagate
physical id: 0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: 3.33
serial: 3KB0DX1E
size: 74GiB (80GB)
capabilities: partitioned partitioned:dos
configuration: ansiversion=5 signature=00042b94
*-volume:0
description: EXT4 volume
vendor: Linux
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
logical name: /
version: 1.0
serial: fd9e1678-4c2d-4d00-931d-18afa47b3f1c
size: 73GiB
capacity: 73GiB
capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized
configuration: created=2010-06-02 00:49:28 filesystem=ext4 lastmountpoint=/���p�%x�p0K��ï��ݜ���9ï¿½ï ¿½0�N�0�N߀%x��ï����ïï¿½ï¿½ï¿½ï¿ ½ï¿½ï�����%x�0)&� modified=2010-06-02 01:06:09 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,barrier=1,data=ordered mounted=2010-06-02 12:16:21 state=mounted
*-volume:1
description: Extended partition
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
size: 1451MiB
capacity: 1451MiB
capabilities: primary extended partitioned partitioned:extended
*-logicalvolume
description: Linux swap / Solaris partition
physical id: 5
logical name: /dev/sda5
capacity: 1451MiB
capabilities: nofs

dino99
June 2nd, 2010, 08:30 AM
add nomodeset on boot line

bfrosty
June 2nd, 2010, 05:21 PM
Thanks Dino. That fix looks promising. I'll give it a try.