CCC999
May 30th, 2010, 11:38 PM
Upgraded from Karmic dual booting with Vista - was using EasyBCD with Karmic. I did not see any mention of changing Grub during upgrade, and was able to boot to 10.04 on the first boot after upgrade. I did update the menu1st file EasyBCD uses reflecting 10.04 (for Vista). However, next boot and after would end in screens I did not understand when selecting Ubuntu. Used LiveCD attempted to install Grub2. Seems I still have parts of Grub mixed in. First HD is just used for storage. I see filesystem check error on boot, with 'S' and 'M' options. S does nothing M gives me a recovery prompt. Bootmasters - any suggestions would be most humbly welcome... PS - I can access all partitions and files from LiveCD, but can not boot to Ubuntu or Vista. Next step - try returning to Grub?? Thanks...
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> No boot loader is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #5 for /boot/grub.
sda1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /NST/menu.lst /bootmgr /Boot/BCD
/Windows/System32/winload.exe
sdb2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________ _______________________
File system: ext3
Boot sector type: Grub
Boot sector info: Grub 0.97 is installed in the boot sector of sdb5 and
looks at sector 169354694 of the same hard drive for
the stage2 file. A stage2 file is at this location on
/dev/sdb. Stage2 looks on partition #5 for
/boot/grub/menu.lst.
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/core.img
sdb6: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: According to the info in the boot sector, sdb6 starts
at sector 466. But according to the info from fdisk,
sdb6 starts at sector 327694336.
Operating System:
Boot files/dirs:
sdb7: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 63 2,930,272,064 2,930,272,002 83 Linux
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 * 2,048 163,842,047 163,840,000 7 HPFS/NTFS
/dev/sdb2 163,846,935 1,465,144,064 1,301,297,130 5 Extended
/dev/sdb5 * 163,846,998 327,693,869 163,846,872 83 Linux
/dev/sdb6 327,694,336 1,441,781,759 1,114,087,424 7 HPFS/NTFS
/dev/sdb7 1,441,785,618 1,465,144,064 23,358,447 82 Linux swap / Solaris
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 e435d2f2-cd32-4734-8699-4355b42de58c ext4 Data2
/dev/sda: PTTYPE="dos"
/dev/sdb1 78104CE7104CAE46 ntfs Vista
/dev/sdb2: PTTYPE="dos"
/dev/sdb5 47146fb1-e580-44a5-97f0-73090840e05c ext3 KARMIC
/dev/sdb6 4C78C89C78C88664 ntfs Data
/dev/sdb7 0478e3e8-43f7-420e-984a-31822b6f57ca swap
/dev/sdb: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr1 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /media/Vista fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_ permissions)
============================== sdb1/NST/menu.lst: ==============================
# NeoSmart NeoGrub Bootloader Configuration File
#
# This is the NeoGrub configuration file, and should be located at C:\NST\menu.lst
# Please see the EasyBCD Documentation for information on how to create/modify entries:
# http://neosmart.net/wiki/display/EBCD
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro single
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-14-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.31-14-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro single
initrd /boot/initrd.img-2.6.31-14-generic
title Ubuntu 10.04 LTS, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet
=========================== sdb5/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 0
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro single
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-14-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.31-14-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro single
initrd /boot/initrd.img-2.6.31-14-generic
title Ubuntu 10.04 LTS, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista/Longhorn (loader)
root (hd0,0)
savedefault
makeactive
chainloader +1
=========================== sdb5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-14-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-14-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
echo 'Loading Linux 2.6.31-14-generic ...'
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# Entry for /dev/sda5 :
UUID=47146fb1-e580-44a5-97f0-73090840e05c / ext3 errors=emount-ror 0 1
# Entry for /dev/sda6 :
UUID=4C78C89C78C88664 /media/Data1 ntfs-3g defaults 0 0
# Entry for /dev/sda1 :
UUID=78104CE7104CAE46 /media/Vista ntfs-3g defaults,locale=en_US.UTF-8 0 0
# Entry for /dev/sda7 :
UUID=0478e3e8-43f7-420e-984a-31822b6f57ca none swap defaults 0 0
/dev/scd1 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/scd0 /media/cdrom1 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sdb5: Location of files loaded by Grub: ===================
86.7GB: boot/grub/core.img
87.0GB: boot/grub/grub.cfg
86.6GB: boot/grub/menu.lst
86.7GB: boot/grub/stage2
86.2GB: boot/initrd.img-2.6.31-14-generic
86.0GB: boot/initrd.img-2.6.32-22-generic
85.8GB: boot/vmlinuz-2.6.31-14-generic
86.2GB: boot/vmlinuz-2.6.32-22-generic
86.0GB: initrd.img
86.2GB: vmlinuz
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> No boot loader is installed in the MBR of /dev/sda
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #5 for /boot/grub.
sda1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /NST/menu.lst /bootmgr /Boot/BCD
/Windows/System32/winload.exe
sdb2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________ _______________________
File system: ext3
Boot sector type: Grub
Boot sector info: Grub 0.97 is installed in the boot sector of sdb5 and
looks at sector 169354694 of the same hard drive for
the stage2 file. A stage2 file is at this location on
/dev/sdb. Stage2 looks on partition #5 for
/boot/grub/menu.lst.
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/core.img
sdb6: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: According to the info in the boot sector, sdb6 starts
at sector 466. But according to the info from fdisk,
sdb6 starts at sector 327694336.
Operating System:
Boot files/dirs:
sdb7: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 1500.3 GB, 1500301910016 bytes
255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 63 2,930,272,064 2,930,272,002 83 Linux
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 * 2,048 163,842,047 163,840,000 7 HPFS/NTFS
/dev/sdb2 163,846,935 1,465,144,064 1,301,297,130 5 Extended
/dev/sdb5 * 163,846,998 327,693,869 163,846,872 83 Linux
/dev/sdb6 327,694,336 1,441,781,759 1,114,087,424 7 HPFS/NTFS
/dev/sdb7 1,441,785,618 1,465,144,064 23,358,447 82 Linux swap / Solaris
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 e435d2f2-cd32-4734-8699-4355b42de58c ext4 Data2
/dev/sda: PTTYPE="dos"
/dev/sdb1 78104CE7104CAE46 ntfs Vista
/dev/sdb2: PTTYPE="dos"
/dev/sdb5 47146fb1-e580-44a5-97f0-73090840e05c ext3 KARMIC
/dev/sdb6 4C78C89C78C88664 ntfs Data
/dev/sdb7 0478e3e8-43f7-420e-984a-31822b6f57ca swap
/dev/sdb: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr1 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
/dev/sdb1 /media/Vista fuseblk (rw,nosuid,nodev,allow_other,blksize=4096,default_ permissions)
============================== sdb1/NST/menu.lst: ==============================
# NeoSmart NeoGrub Bootloader Configuration File
#
# This is the NeoGrub configuration file, and should be located at C:\NST\menu.lst
# Please see the EasyBCD Documentation for information on how to create/modify entries:
# http://neosmart.net/wiki/display/EBCD
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro single
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-14-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.31-14-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro single
initrd /boot/initrd.img-2.6.31-14-generic
title Ubuntu 10.04 LTS, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet
=========================== sdb5/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 0
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
#hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=(hd0,4)
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro single
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-14-generic
root (hd0,4)
kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.31-14-generic (recovery mode)
root (hd0,4)
kernel /boot/vmlinuz-2.6.31-14-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro single
initrd /boot/initrd.img-2.6.31-14-generic
title Ubuntu 10.04 LTS, memtest86+
root (hd0,4)
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
# This is a divider, added to separate the menu items below from the Debian
# ones.
title Other operating systems:
root
# This entry automatically added by the Debian installer for a non-linux OS
# on /dev/sda1
title Windows Vista/Longhorn (loader)
root (hd0,0)
savedefault
makeactive
chainloader +1
=========================== sdb5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-14-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-14-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
echo 'Loading Linux 2.6.31-14-generic ...'
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=47146fb1-e580-44a5-97f0-73090840e05c ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd1,5)'
search --no-floppy --fs-uuid --set 47146fb1-e580-44a5-97f0-73090840e05c
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# -- This file has been automaticly generated by ntfs-config --
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# Entry for /dev/sda5 :
UUID=47146fb1-e580-44a5-97f0-73090840e05c / ext3 errors=emount-ror 0 1
# Entry for /dev/sda6 :
UUID=4C78C89C78C88664 /media/Data1 ntfs-3g defaults 0 0
# Entry for /dev/sda1 :
UUID=78104CE7104CAE46 /media/Vista ntfs-3g defaults,locale=en_US.UTF-8 0 0
# Entry for /dev/sda7 :
UUID=0478e3e8-43f7-420e-984a-31822b6f57ca none swap defaults 0 0
/dev/scd1 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/scd0 /media/cdrom1 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sdb5: Location of files loaded by Grub: ===================
86.7GB: boot/grub/core.img
87.0GB: boot/grub/grub.cfg
86.6GB: boot/grub/menu.lst
86.7GB: boot/grub/stage2
86.2GB: boot/initrd.img-2.6.31-14-generic
86.0GB: boot/initrd.img-2.6.32-22-generic
85.8GB: boot/vmlinuz-2.6.31-14-generic
86.2GB: boot/vmlinuz-2.6.32-22-generic
86.0GB: initrd.img
86.2GB: vmlinuz