scawa
May 15th, 2010, 05:33 PM
I installed ActiveMQ, set up an init.d script and was able to start | stop | restart ActiveMQ from the init.d script. However, when I tried to use:
>sudo chkconfig --add activemq
upstart seemed not to like it. Having NO documentation on how to create a daemon that works with Upstart on the Ubuntu forums, I'm wondering if anyone has any idea why my init.d script doesn't convert.
I'm using Ubuntu 10.x.x but this happens on 9.x.x also.
Here is my script..
#!/bin/bash
#
### BEGIN INIT INFO
# Provides: activemq
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Should-Start: $network $named $time
# Should-Stop: $network $named $time
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
#chkconfig: 345 88 12
# Short-Description: Start and stop the ActiveMQ server daemon
# Description: Controls the main ActiveMQ (JMS Messaging Queue Server) daemon
# and its wrapper script "mysqld_safe".
# chckconfig: 345 88 12
### END INIT INFO
test -s /etc/rc.status && . /etc/rc.status && rc_reset
# Script Startup variables
JAVA=/usr/bin/java
HOME=/opt/activemq/bin
PLATFORM=linux-x86-64
NAME=ActiveMQ
LONG_NAME=="${NAME} Broker"
# Process ID
PIDDIR="/var/run"
PIDFILE="${PIDDIR}/${NAME}.pid"
LOCKDIR="/var/lock/subsys"
LOCKFILE="$LOCKDIR/$NAME"
WRAPPER_CMD="wrapper"
WRAPPER_CONF="wrapper.conf"
PWD_CMD=`pwd`
# Resolve the location of the 'ps' command
PSEXE="/usr/bin/ps"
if [ ! -x $PSEXE ]; then
PSEXE="/bin/ps"
if [ ! -x $PSESE ]; then
echo "Unable to locate the 'ps' command."
echo "Please report this message along with the locarion of the command on your system."
exit 1
fi
fi
# Resolve the os
DIST_OS=`uname -s | tr [:upper:] [:lower:] | tr -d [:blank:]`
case "$DIST_OS" in
'sunos')
DIST_OS="solaris"
;;
'hp-ux' | 'hp-ux64')
DIST_OS="hpux"
;;
'darwin')
DIST_OS="macosx"
;;
'unix_sv')
DIST_OS="unixware"
;;
esac
echo "OS $DIST_OS"
# Resolve the architecture
DIST_ARCH=`uname -p 2>/dev/null | tr [:upper:] [:lower:] | tr -d [:blank:]`
if [ "$DIST_ARCH" = "unknown" ] || [ "$DIST_ARCH" = "" ]
then
DIST_ARCH=`uname -m | tr [:upper:] [:lower:] | tr -d [:blank:]`
fi
echo "DIST_ARCH: $DIST_ARCH"
case "$DIST_ARCH" in
'amd64' | 'ia32' | 'ia64' | 'i386' | 'i486' | 'i586' | 'i686' | 'x86_64')
DIST_ARCH="x86"
;;
'ip27')
DIST_ARCH="mips"
;;
'power' | 'powerpc' | 'power_pc' | 'ppc64')
DIST_ARCH="ppc"
;;
'pa_risc' | 'pa-risc')
DIST_ARCH="parisc"
;;
'sun4u' | 'sparcv9')
DIST_ARCH="sparc"
;;
'9000/800')
DIST_ARCH="parisc"
;;
esac
echo "ARCH $DIST_ARCH"
# Decide on the wrapper binary to use.
# If a 32-bit wrapper binary exists then it will work on 32 or 64 bit
# platforms, if the 64-bit binary exists then the distribution most
# likely wants to use long names. Otherwise, look for the default.
# For macosx, we also want to look for universal binaries.
WRAPPER_TEST_CMD="$HOME/$DIST_OS-$DIST_ARCH-64/$WRAPPER_CMD"
echo "Wraper test cmd $WRAPPER_TEST_CMD"
if [ -x $WRAPPER_TEST_CMD ]
then
WRAPPER_CMD="$WRAPPER_TEST_CMD"
else
if [ "$DIST_OS" = "macosx" ]
then
WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-32"
if [ -x $WRAPPER_TEST_CMD ]
then
WRAPPER_CMD="$WRAPPER_TEST_CMD"
else
WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
if [ -x $WRAPPER_TEST_CMD ]
then
WRAPPER_CMD="$WRAPPER_TEST_CMD"
else
WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-64"
if [ -x $WRAPPER_TEST_CMD ]
then
WRAPPER_CMD="$WRAPPER_TEST_CMD"
else
if [ ! -x $WRAPPER_CMD ]
then
echo "Unable to locate any of the following binaries:"
echo " $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
echo " $WRAPPER_CMD-$DIST_OS-universal-32"
echo " $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
echo " $WRAPPER_CMD-$DIST_OS-universal-64"
echo " $WRAPPER_CMD"
exit 1
fi
fi
fi
fi
else
WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
if [ -x $WRAPPER_TEST_CMD ]
then
WRAPPER_CMD="$WRAPPER_TEST_CMD"
else
if [ ! -x $WRAPPER_CMD ]
then
echo "Unable to locate any of the following binaries:"
echo " $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
echo " $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
echo " $WRAPPER_CMD"
exit 1
fi
fi
fi
fi
# Build the nice clause
if [ "X$PRIORITY" = "X" ]
then
CMDNICE=""
else
CMDNICE="nice -$PRIORITY"
fi
# Build the anchor file clause.
if [ "X$IGNORE_SIGNALS" = "X" ]
then
ANCHORPROP=
IGNOREPROP=
else
ANCHORPROP=wrapper.anchorfile=$ANCHORFILE
IGNOREPROP=wrapper.ignore_signals=TRUE
fi
# Build the lock file clause. Only create a lock file if the lock directory exists on this platform.
if [ -d $LOCKDIR ]
then
LOCKPROP=wrapper.lockfile=$LOCKFILE
else
LOCKPROP=
fi
getpid() {
if [ -f $PIDFILE ]
then
if [ -r $PIDFILE ]
then
pid=`cat $PIDFILE`
if [ "X$pid" != "X" ]
then
# It is possible that 'a' process with the pid exists but that it is not the
# correct process. This can happen in a number of cases, but the most
# common is during system startup after an unclean shutdown.
# The ps statement below looks for the specific wrapper command running as
# the pid. If it is not found then the pid file is considered to be stale.
pidtest=`$PSEXE -p $pid -o args | grep $WRAPPER_CMD | tail -1`
if [ "X$pidtest" = "X" ]
then
# This is a stale pid file.
rm -f $PIDFILE
echo "Removed stale pid file: $PIDFILE"
pid=""
fi
fi
else
echo "Cannot read $PIDFILE."
exit 1
fi
fi
}
testpid() {
pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
if [ "X$pid" = "X" ]
then
# Process is gone so remove the pid file.
rm -f $PIDFILE
pid=""
fi
}
# Test for the existance of certain apps
test_for_app ()
{
app_found=0
if [ "f" = "$2" ] && [ -f $1 ]; then
app_found=1
elif [ "x" = "$2" ] && [ -x $1 ]; then
app_found=1
fi
if [ 0 = $app_found ]; then
echo "Warning: Could not find required file: $1"
if [ "$1" = "stop" ]; then
exit 0
else
exit 5
fi
update-rc.d -v
exit
fi
return
}
console() {
echo "Running $APP_LONG_NAME..."
getpid
if [ "X$pid" = "X" ]
then
COMMAND_LINE="$CMDNICE $WRAPPER_CMD $WRAPPER_CONF wrapper.syslog.ident=$APP_NAME wrapper.pidfile=$PIDFILE $ANCHORPROP $LOCKPROP"
exec $COMMAND_LINE
else
echo "$APP_LONG_NAME is already running."
exit 1
fi
}
test_for_app ${JAVA} x
test_for_app ${HOME} x
test_for_app ${HOME}/${PLATFORM} x
usage ()
{
echo ""
echo "Usage: $0 <command>"
echo ""
echo "where <command> is one of the following:"
echo " start - starts ActiveMQ if it not running."
echo " stops - stops ActiveMQ if it is running."
echo " restart - stop and start ActiveMQ"
echo " usage - pring this message"
echo ""
}
do_start() {
echo "Starting $APP_LONG_NAME..."
getpid
if [ "X$pid" = "X" ]
then
COMMAND_LINE="$CMDNICE $WRAPPER_CMD $WRAPPER_CONF wrapper.syslog.ident=$APP_NAME wrapper.pidfile=$PIDFILE wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $LOCKPROP"
exec $COMMAND_LINE
else
echo "$APP_LONG_NAME is already running."
exit 1
fi
}
do_stop() {
echo "Stopping $APP_LONG_NAME..."
getpid
if [ "X$pid" = "X" ]
then
echo "$APP_LONG_NAME was not running."
else
if [ "X$IGNORE_SIGNALS" = "X" ]
then
# Running so try to stop it.
kill $pid
if [ $? -ne 0 ]
then
# An explanation for the failure should have been given
echo "Unable to stop $APP_LONG_NAME."
exit 1
fi
else
rm -f $ANCHORFILE
if [ -f $ANCHORFILE ]
then
# An explanation for the failure should have been given
echo "Unable to stop $APP_LONG_NAME."
exit 1
fi
fi
# We can not predict how long it will take for the wrapper to
# actually stop as it depends on settings in wrapper.conf.
# Loop until it does.
savepid=$pid
CNT=0
TOTCNT=0
while [ "X$pid" != "X" ]
do
# Show a waiting message every 5 seconds.
if [ "$CNT" -lt "5" ]
then
CNT=`expr $CNT + 1`
else
echo "Waiting for $APP_LONG_NAME to exit..."
CNT=0
fi
TOTCNT=`expr $TOTCNT + 1`
sleep 1
testpid
done
pid=$savepid
testpid
if [ "X$pid" != "X" ]
then
echo "Failed to stop $APP_LONG_NAME."
exit 1
else
echo "Stopped $APP_LONG_NAME."
fi
fi
}
do_status() {
getpid
if [ "X$pid" = "X" ]
then
echo "$APP_LONG_NAME is not running."
exit 1
else
echo "$APP_LONG_NAME is running ($pid)."
exit 0
fi
}
case "$1" in
start)
do_start
exit
;;
stop)
do_stop
exit
;;
restart)
do_stop
do_start
exit
;;
status)
do_status
exit
;;
usage|help)
usage
exit 0
;;
esac
And here is just SOME of the errors I get trying to do this:
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'ufw' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'dmesg' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `networking' overwrites defaults (empty).
insserv: warning: current start runlevel(s) (0 6) of script `wpa-ifupdown' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth-stop' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'console-setup' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'apport' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'mysql' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'failsafe-x' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0) of script `halt' overwrites defaults (empty).
insserv: warning: current start runlevel(s) (0 6) of script `umountnfs.sh' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'irqbalance' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'cron' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udev' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'hwclock' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udevtrigger' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udev-finish' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth-splash' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'hwclock-save' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth-log' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `sendsigs' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'network-interface-security' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udevmonitor' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'module-init-tools' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'network-interface' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'rsyslog' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'hostname' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'atd' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (6) of script `reboot' overwrites defaults (empty).
insserv: warning: current start runlevel(s) (0 6) of script `umountfs' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'procps' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `umountroot' overwrites defaults (empty).
insserv: There is a loop between service rsyslog and hwclock if stopped
insserv: loop involving service hwclock at depth 4
insserv: loop involving service postgresql at depth 3
insserv: There is a loop between service postgresql and rsyslog if stopped
insserv: loop involving service rsyslog at depth 4
insserv: exiting now without changing boot order!
/sbin/insserv failed, exit code 1
activemq 0:off 1:off 2:off 3:off 4:off 5:off 6:off
What's going on here?
Thanks
Stephen McConnell
>sudo chkconfig --add activemq
upstart seemed not to like it. Having NO documentation on how to create a daemon that works with Upstart on the Ubuntu forums, I'm wondering if anyone has any idea why my init.d script doesn't convert.
I'm using Ubuntu 10.x.x but this happens on 9.x.x also.
Here is my script..
#!/bin/bash
#
### BEGIN INIT INFO
# Provides: activemq
# Required-Start: $remote_fs $syslog
# Required-Stop: $remote_fs $syslog
# Should-Start: $network $named $time
# Should-Stop: $network $named $time
# Default-Start: 2 3 4 5
# Default-Stop: 0 1 6
#chkconfig: 345 88 12
# Short-Description: Start and stop the ActiveMQ server daemon
# Description: Controls the main ActiveMQ (JMS Messaging Queue Server) daemon
# and its wrapper script "mysqld_safe".
# chckconfig: 345 88 12
### END INIT INFO
test -s /etc/rc.status && . /etc/rc.status && rc_reset
# Script Startup variables
JAVA=/usr/bin/java
HOME=/opt/activemq/bin
PLATFORM=linux-x86-64
NAME=ActiveMQ
LONG_NAME=="${NAME} Broker"
# Process ID
PIDDIR="/var/run"
PIDFILE="${PIDDIR}/${NAME}.pid"
LOCKDIR="/var/lock/subsys"
LOCKFILE="$LOCKDIR/$NAME"
WRAPPER_CMD="wrapper"
WRAPPER_CONF="wrapper.conf"
PWD_CMD=`pwd`
# Resolve the location of the 'ps' command
PSEXE="/usr/bin/ps"
if [ ! -x $PSEXE ]; then
PSEXE="/bin/ps"
if [ ! -x $PSESE ]; then
echo "Unable to locate the 'ps' command."
echo "Please report this message along with the locarion of the command on your system."
exit 1
fi
fi
# Resolve the os
DIST_OS=`uname -s | tr [:upper:] [:lower:] | tr -d [:blank:]`
case "$DIST_OS" in
'sunos')
DIST_OS="solaris"
;;
'hp-ux' | 'hp-ux64')
DIST_OS="hpux"
;;
'darwin')
DIST_OS="macosx"
;;
'unix_sv')
DIST_OS="unixware"
;;
esac
echo "OS $DIST_OS"
# Resolve the architecture
DIST_ARCH=`uname -p 2>/dev/null | tr [:upper:] [:lower:] | tr -d [:blank:]`
if [ "$DIST_ARCH" = "unknown" ] || [ "$DIST_ARCH" = "" ]
then
DIST_ARCH=`uname -m | tr [:upper:] [:lower:] | tr -d [:blank:]`
fi
echo "DIST_ARCH: $DIST_ARCH"
case "$DIST_ARCH" in
'amd64' | 'ia32' | 'ia64' | 'i386' | 'i486' | 'i586' | 'i686' | 'x86_64')
DIST_ARCH="x86"
;;
'ip27')
DIST_ARCH="mips"
;;
'power' | 'powerpc' | 'power_pc' | 'ppc64')
DIST_ARCH="ppc"
;;
'pa_risc' | 'pa-risc')
DIST_ARCH="parisc"
;;
'sun4u' | 'sparcv9')
DIST_ARCH="sparc"
;;
'9000/800')
DIST_ARCH="parisc"
;;
esac
echo "ARCH $DIST_ARCH"
# Decide on the wrapper binary to use.
# If a 32-bit wrapper binary exists then it will work on 32 or 64 bit
# platforms, if the 64-bit binary exists then the distribution most
# likely wants to use long names. Otherwise, look for the default.
# For macosx, we also want to look for universal binaries.
WRAPPER_TEST_CMD="$HOME/$DIST_OS-$DIST_ARCH-64/$WRAPPER_CMD"
echo "Wraper test cmd $WRAPPER_TEST_CMD"
if [ -x $WRAPPER_TEST_CMD ]
then
WRAPPER_CMD="$WRAPPER_TEST_CMD"
else
if [ "$DIST_OS" = "macosx" ]
then
WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-32"
if [ -x $WRAPPER_TEST_CMD ]
then
WRAPPER_CMD="$WRAPPER_TEST_CMD"
else
WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
if [ -x $WRAPPER_TEST_CMD ]
then
WRAPPER_CMD="$WRAPPER_TEST_CMD"
else
WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-64"
if [ -x $WRAPPER_TEST_CMD ]
then
WRAPPER_CMD="$WRAPPER_TEST_CMD"
else
if [ ! -x $WRAPPER_CMD ]
then
echo "Unable to locate any of the following binaries:"
echo " $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
echo " $WRAPPER_CMD-$DIST_OS-universal-32"
echo " $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
echo " $WRAPPER_CMD-$DIST_OS-universal-64"
echo " $WRAPPER_CMD"
exit 1
fi
fi
fi
fi
else
WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
if [ -x $WRAPPER_TEST_CMD ]
then
WRAPPER_CMD="$WRAPPER_TEST_CMD"
else
if [ ! -x $WRAPPER_CMD ]
then
echo "Unable to locate any of the following binaries:"
echo " $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32"
echo " $WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64"
echo " $WRAPPER_CMD"
exit 1
fi
fi
fi
fi
# Build the nice clause
if [ "X$PRIORITY" = "X" ]
then
CMDNICE=""
else
CMDNICE="nice -$PRIORITY"
fi
# Build the anchor file clause.
if [ "X$IGNORE_SIGNALS" = "X" ]
then
ANCHORPROP=
IGNOREPROP=
else
ANCHORPROP=wrapper.anchorfile=$ANCHORFILE
IGNOREPROP=wrapper.ignore_signals=TRUE
fi
# Build the lock file clause. Only create a lock file if the lock directory exists on this platform.
if [ -d $LOCKDIR ]
then
LOCKPROP=wrapper.lockfile=$LOCKFILE
else
LOCKPROP=
fi
getpid() {
if [ -f $PIDFILE ]
then
if [ -r $PIDFILE ]
then
pid=`cat $PIDFILE`
if [ "X$pid" != "X" ]
then
# It is possible that 'a' process with the pid exists but that it is not the
# correct process. This can happen in a number of cases, but the most
# common is during system startup after an unclean shutdown.
# The ps statement below looks for the specific wrapper command running as
# the pid. If it is not found then the pid file is considered to be stale.
pidtest=`$PSEXE -p $pid -o args | grep $WRAPPER_CMD | tail -1`
if [ "X$pidtest" = "X" ]
then
# This is a stale pid file.
rm -f $PIDFILE
echo "Removed stale pid file: $PIDFILE"
pid=""
fi
fi
else
echo "Cannot read $PIDFILE."
exit 1
fi
fi
}
testpid() {
pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1`
if [ "X$pid" = "X" ]
then
# Process is gone so remove the pid file.
rm -f $PIDFILE
pid=""
fi
}
# Test for the existance of certain apps
test_for_app ()
{
app_found=0
if [ "f" = "$2" ] && [ -f $1 ]; then
app_found=1
elif [ "x" = "$2" ] && [ -x $1 ]; then
app_found=1
fi
if [ 0 = $app_found ]; then
echo "Warning: Could not find required file: $1"
if [ "$1" = "stop" ]; then
exit 0
else
exit 5
fi
update-rc.d -v
exit
fi
return
}
console() {
echo "Running $APP_LONG_NAME..."
getpid
if [ "X$pid" = "X" ]
then
COMMAND_LINE="$CMDNICE $WRAPPER_CMD $WRAPPER_CONF wrapper.syslog.ident=$APP_NAME wrapper.pidfile=$PIDFILE $ANCHORPROP $LOCKPROP"
exec $COMMAND_LINE
else
echo "$APP_LONG_NAME is already running."
exit 1
fi
}
test_for_app ${JAVA} x
test_for_app ${HOME} x
test_for_app ${HOME}/${PLATFORM} x
usage ()
{
echo ""
echo "Usage: $0 <command>"
echo ""
echo "where <command> is one of the following:"
echo " start - starts ActiveMQ if it not running."
echo " stops - stops ActiveMQ if it is running."
echo " restart - stop and start ActiveMQ"
echo " usage - pring this message"
echo ""
}
do_start() {
echo "Starting $APP_LONG_NAME..."
getpid
if [ "X$pid" = "X" ]
then
COMMAND_LINE="$CMDNICE $WRAPPER_CMD $WRAPPER_CONF wrapper.syslog.ident=$APP_NAME wrapper.pidfile=$PIDFILE wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $LOCKPROP"
exec $COMMAND_LINE
else
echo "$APP_LONG_NAME is already running."
exit 1
fi
}
do_stop() {
echo "Stopping $APP_LONG_NAME..."
getpid
if [ "X$pid" = "X" ]
then
echo "$APP_LONG_NAME was not running."
else
if [ "X$IGNORE_SIGNALS" = "X" ]
then
# Running so try to stop it.
kill $pid
if [ $? -ne 0 ]
then
# An explanation for the failure should have been given
echo "Unable to stop $APP_LONG_NAME."
exit 1
fi
else
rm -f $ANCHORFILE
if [ -f $ANCHORFILE ]
then
# An explanation for the failure should have been given
echo "Unable to stop $APP_LONG_NAME."
exit 1
fi
fi
# We can not predict how long it will take for the wrapper to
# actually stop as it depends on settings in wrapper.conf.
# Loop until it does.
savepid=$pid
CNT=0
TOTCNT=0
while [ "X$pid" != "X" ]
do
# Show a waiting message every 5 seconds.
if [ "$CNT" -lt "5" ]
then
CNT=`expr $CNT + 1`
else
echo "Waiting for $APP_LONG_NAME to exit..."
CNT=0
fi
TOTCNT=`expr $TOTCNT + 1`
sleep 1
testpid
done
pid=$savepid
testpid
if [ "X$pid" != "X" ]
then
echo "Failed to stop $APP_LONG_NAME."
exit 1
else
echo "Stopped $APP_LONG_NAME."
fi
fi
}
do_status() {
getpid
if [ "X$pid" = "X" ]
then
echo "$APP_LONG_NAME is not running."
exit 1
else
echo "$APP_LONG_NAME is running ($pid)."
exit 0
fi
}
case "$1" in
start)
do_start
exit
;;
stop)
do_stop
exit
;;
restart)
do_stop
do_start
exit
;;
status)
do_status
exit
;;
usage|help)
usage
exit 0
;;
esac
And here is just SOME of the errors I get trying to do this:
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'ufw' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'dmesg' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `networking' overwrites defaults (empty).
insserv: warning: current start runlevel(s) (0 6) of script `wpa-ifupdown' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth-stop' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'console-setup' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'apport' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'mysql' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'failsafe-x' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0) of script `halt' overwrites defaults (empty).
insserv: warning: current start runlevel(s) (0 6) of script `umountnfs.sh' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'irqbalance' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'cron' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udev' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'hwclock' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udevtrigger' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udev-finish' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth-splash' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'hwclock-save' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'plymouth-log' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `sendsigs' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'network-interface-security' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'udevmonitor' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'module-init-tools' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'network-interface' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'rsyslog' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'hostname' missing LSB tags and overrides
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'atd' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (6) of script `reboot' overwrites defaults (empty).
insserv: warning: current start runlevel(s) (0 6) of script `umountfs' overwrites defaults (empty).
The script you are attempting to invoke has been converted to an Upstart
job, but lsb-header is not supported for Upstart jobs.
insserv: warning: script 'procps' missing LSB tags and overrides
insserv: warning: current start runlevel(s) (0 6) of script `umountroot' overwrites defaults (empty).
insserv: There is a loop between service rsyslog and hwclock if stopped
insserv: loop involving service hwclock at depth 4
insserv: loop involving service postgresql at depth 3
insserv: There is a loop between service postgresql and rsyslog if stopped
insserv: loop involving service rsyslog at depth 4
insserv: exiting now without changing boot order!
/sbin/insserv failed, exit code 1
activemq 0:off 1:off 2:off 3:off 4:off 5:off 6:off
What's going on here?
Thanks
Stephen McConnell