frankie15
May 14th, 2010, 04:44 PM
I just got a Toshiba Mini NB305-310 and tried to install Ubuntu 10.04 on it using the .iso file on a flash drive. When I try to boot into Windows XP, the loading screen comes up for a second, flashes blue, then restarts the computer. I'm able to boot up in Ubuntu, but it takes a LONG time with the screen black before it goes to the Ubuntu loading screen.
I saw in an earlier post that it's helpful to post the output of the Boot Info Script, so I've posted it below. I'm new to the forums, so if I'm doing anything wrong, please let me know:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sda2: __________________________________________________ _______________________
File system: vfat
Boot sector type: Windows XP: Fat32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /ntldr /NTDETECT.COM
sda3: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda6: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdc: __________________________________________________ _______________________
File system: vfat
Boot sector type: Windows XP: Fat32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 77,656,837 77,656,775 7 HPFS/NTFS
/dev/sda2 288,720,180 312,576,704 23,856,525 1c Hidden W95 FAT32 (LBA)
/dev/sda3 77,658,110 288,718,847 211,060,738 5 Extended
/dev/sda5 77,658,112 282,765,311 205,107,200 83 Linux
/dev/sda6 282,767,360 288,718,847 5,951,488 82 Linux swap / Solaris
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/sda1 EC041A2D0419FB72 ntfs TI105829P0B
/dev/sda2 F83E-CC56 vfat HDDRECOVERY
/dev/sda3: PTTYPE="dos"
/dev/sda5 e0e0638c-442d-453b-90df-3617cf4cf53a ext4
/dev/sda6 491456ce-5bfa-41f7-8ddb-5f547775c8d8 swap
/dev/sda: PTTYPE="dos"
/dev/sdc 54AA-D5D6 vfat
error: /dev/sdb: No medium found
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda5 / ext4 (rw,errors=remount-ro)
/dev/sdc /media/54AA-D5D6 vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000, shortname=mixed,dmask=0077,utf8=1,flush)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /noexecute=optin /fastdetect
=========================== sda5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set e0e0638c-442d-453b-90df-3617cf4cf53a
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set e0e0638c-442d-453b-90df-3617cf4cf53a
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set e0e0638c-442d-453b-90df-3617cf4cf53a
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=e0e0638c-442d-453b-90df-3617cf4cf53a ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set e0e0638c-442d-453b-90df-3617cf4cf53a
echo 'Loading Linux 2.6.32-21-generic ...'
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=e0e0638c-442d-453b-90df-3617cf4cf53a ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set e0e0638c-442d-453b-90df-3617cf4cf53a
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set e0e0638c-442d-453b-90df-3617cf4cf53a
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Home Edition (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set ec041a2d0419fb72
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Windows NT/2000/XP (on /dev/sda2)" {
insmod fat
set root='(hd0,2)'
search --no-floppy --fs-uuid --set f83e-cc56
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda5 during installation
UUID=e0e0638c-442d-453b-90df-3617cf4cf53a / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=491456ce-5bfa-41f7-8ddb-5f547775c8d8 none swap sw 0 0
=================== sda5: Location of files loaded by Grub: ===================
123.6GB: boot/grub/core.img
80.7GB: boot/grub/grub.cfg
123.6GB: boot/initrd.img-2.6.32-21-generic
123.6GB: boot/vmlinuz-2.6.32-21-generic
123.6GB: initrd.img
123.6GB: vmlinuz
=======Devices which don't seem to have a corresponding hard drive==============
sdb
I saw in an earlier post that it's helpful to post the output of the Boot Info Script, so I've posted it below. I'm new to the forums, so if I'm doing anything wrong, please let me know:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows XP
Boot files/dirs: /boot.ini /ntldr /NTDETECT.COM
sda2: __________________________________________________ _______________________
File system: vfat
Boot sector type: Windows XP: Fat32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /ntldr /NTDETECT.COM
sda3: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sda6: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdc: __________________________________________________ _______________________
File system: vfat
Boot sector type: Windows XP: Fat32
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 77,656,837 77,656,775 7 HPFS/NTFS
/dev/sda2 288,720,180 312,576,704 23,856,525 1c Hidden W95 FAT32 (LBA)
/dev/sda3 77,658,110 288,718,847 211,060,738 5 Extended
/dev/sda5 77,658,112 282,765,311 205,107,200 83 Linux
/dev/sda6 282,767,360 288,718,847 5,951,488 82 Linux swap / Solaris
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/sda1 EC041A2D0419FB72 ntfs TI105829P0B
/dev/sda2 F83E-CC56 vfat HDDRECOVERY
/dev/sda3: PTTYPE="dos"
/dev/sda5 e0e0638c-442d-453b-90df-3617cf4cf53a ext4
/dev/sda6 491456ce-5bfa-41f7-8ddb-5f547775c8d8 swap
/dev/sda: PTTYPE="dos"
/dev/sdc 54AA-D5D6 vfat
error: /dev/sdb: No medium found
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda5 / ext4 (rw,errors=remount-ro)
/dev/sdc /media/54AA-D5D6 vfat (rw,nosuid,nodev,uhelper=udisks,uid=1000,gid=1000, shortname=mixed,dmask=0077,utf8=1,flush)
================================ sda1/boot.ini: ================================
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOW S
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /noexecute=optin /fastdetect
=========================== sda5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set e0e0638c-442d-453b-90df-3617cf4cf53a
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set e0e0638c-442d-453b-90df-3617cf4cf53a
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set e0e0638c-442d-453b-90df-3617cf4cf53a
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=e0e0638c-442d-453b-90df-3617cf4cf53a ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set e0e0638c-442d-453b-90df-3617cf4cf53a
echo 'Loading Linux 2.6.32-21-generic ...'
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=e0e0638c-442d-453b-90df-3617cf4cf53a ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set e0e0638c-442d-453b-90df-3617cf4cf53a
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set e0e0638c-442d-453b-90df-3617cf4cf53a
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Home Edition (on /dev/sda1)" {
insmod ntfs
set root='(hd0,1)'
search --no-floppy --fs-uuid --set ec041a2d0419fb72
drivemap -s (hd0) ${root}
chainloader +1
}
menuentry "Windows NT/2000/XP (on /dev/sda2)" {
insmod fat
set root='(hd0,2)'
search --no-floppy --fs-uuid --set f83e-cc56
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda5 during installation
UUID=e0e0638c-442d-453b-90df-3617cf4cf53a / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=491456ce-5bfa-41f7-8ddb-5f547775c8d8 none swap sw 0 0
=================== sda5: Location of files loaded by Grub: ===================
123.6GB: boot/grub/core.img
80.7GB: boot/grub/grub.cfg
123.6GB: boot/initrd.img-2.6.32-21-generic
123.6GB: boot/vmlinuz-2.6.32-21-generic
123.6GB: initrd.img
123.6GB: vmlinuz
=======Devices which don't seem to have a corresponding hard drive==============
sdb