Danial
May 11th, 2010, 12:57 AM
Hi,
Apologies if this was answered earlier. Thanks in advance for your attention. I admit that I am a noob - knows a little which makes it more dangerous than not knowing at all. :(
In brief, I am unable to boot one of the OS out of 3 I have installed. Everything is fresh install on newly formatted partitions.
Here are the details:
Two HDs - one is Sata and second is IDE.
Win7 installed on IDE (sdb2) then Ubuntu 9.10 on Sata (sda2) and lastly Linux Mint on Sata (sda3). Everyone was on its place - that is - Ubuntu 9.10 on sda2, Linux-Mint on sda3 and Win7 on sdb2.
Future of the day was bright and promising until I upgraded online to 10.04. After that, I was only able to boot to Win7 (IDE drive - sdb2 - not sure if it changed at that point or not) but no nix OS on Sata sda2 & sda3.
I downloaded 10.04 and installed from CD again on sda2. Well, now I am able to boot into Win7 and Ubuntu 10.04 but no Linux-Mint.
Another interesting thing is that sda and sdb have interchanged/swapped. So now if I chcek it thru gparted or run boot script, Sata drive shows up as sdb and IDE is now sda. In another post, I read that grub2 does that and make IDE drive as the first drive and Sata drive as second. Well, I buy that but why I am unable to boot to second OS on the same Sata drive? Evidently, I am missing something and I take that it is mostly user error but please -
With some guidance, I am sure I can learn something new. Here is the output of the boot_info_script055.sh:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks for
(UUID=20e08ddc-06bc-4f21-96ba-92563ad5cb63)/boot/grub.
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #2 for /boot/grub.
sda1: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/ntldr /NTDETECT.COM
sdb1: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdb2: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb3: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 8 Helena - Main
Edition
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb4: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdb5: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb6: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb7: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb8: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb9: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb10: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb11: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb12: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 63 10,233,404 10,233,342 82 Linux swap / Solaris
/dev/sda2 * 10,233,405 78,156,224 67,922,820 7 HPFS/NTFS
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 63 10,120,949 10,120,887 82 Linux swap / Solaris
/dev/sdb2 * 10,120,950 95,185,124 85,064,175 83 Linux
/dev/sdb3 95,185,125 180,249,299 85,064,175 83 Linux
/dev/sdb4 180,249,361 976,768,064 796,518,704 5 Extended
/dev/sdb5 180,249,363 285,716,024 105,466,662 83 Linux
/dev/sdb6 285,716,088 444,293,639 158,577,552 83 Linux
/dev/sdb7 444,293,703 602,871,254 158,577,552 83 Linux
/dev/sdb8 602,871,318 655,435,934 52,564,617 83 Linux
/dev/sdb9 655,435,998 708,000,614 52,564,617 83 Linux
/dev/sdb10 813,467,403 895,109,669 81,642,267 83 Linux
/dev/sdb11 895,109,733 976,768,064 81,658,332 83 Linux
/dev/sdb12 708,000,678 813,467,339 105,466,662 7 HPFS/NTFS
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/sda1 d898c458-3a28-4abf-9a28-c34d356c0046 swap swap
/dev/sda2 66B8B439B8B40A17 ntfs
/dev/sda: PTTYPE="dos"
/dev/sdb10 ce1aca59-ceda-4aef-8230-eb2996535daf ext4 Temp
/dev/sdb11 3f608fc3-eef3-4dfe-a755-5e83486bb0e5 ext4 Kachra
/dev/sdb12 73E1719801BBE72A ntfs Win-apps
/dev/sdb1 3a7ce152-9022-42d2-8069-088a8ce8d58d swap swap
/dev/sdb2 84781de9-0f61-474c-a56e-d6f455826462 ext4
/dev/sdb3 20e08ddc-06bc-4f21-96ba-92563ad5cb63 ext4 mint
/dev/sdb4: PTTYPE="dos"
/dev/sdb5 6e000c7f-2221-490e-818d-62a8d5d61578 ext4 Download
/dev/sdb6 2c97211d-9eb8-4520-9ea7-c091e58b3a3b ext4 Ganey
/dev/sdb7 846a0dc9-58ba-468d-9e19-1fc5b59715c4 ext4 Tasaveer
/dev/sdb8 b8aaa3ec-6996-486a-b9bb-aa3a954ff7c3 ext4 Kaghzat
/dev/sdb9 1d3711f4-d1cf-472d-b09b-f90667a033fa ext4 Linux-doc
/dev/sdb: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sdb2 / ext4 (rw,errors=remount-ro)
=========================== sdb2/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=84781de9-0f61-474c-a56e-d6f455826462 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=84781de9-0f61-474c-a56e-d6f455826462 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=84781de9-0f61-474c-a56e-d6f455826462 ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
echo 'Loading Linux 2.6.32-21-generic ...'
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=84781de9-0f61-474c-a56e-d6f455826462 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda2)" {
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 66b8b439b8b40a17
chainloader +1
}
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (/dev/sda3) (on /dev/sdb3)" {
insmod ext2
set root='(hd1,3)'
search --no-floppy --fs-uuid --set 20e08ddc-06bc-4f21-96ba-92563ad5cb63
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=20e08ddc-06bc-4f21-96ba-92563ad5cb63 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (recovery mode) (on /dev/sdb3)" {
insmod ext2
set root='(hd1,3)'
search --no-floppy --fs-uuid --set 20e08ddc-06bc-4f21-96ba-92563ad5cb63
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=20e08ddc-06bc-4f21-96ba-92563ad5cb63 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb2/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda2 during installation
UUID=84781de9-0f61-474c-a56e-d6f455826462 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda1 during installation
UUID=3a7ce152-9022-42d2-8069-088a8ce8d58d none swap sw 0 0
# swap was on /dev/sdb1 during installation
UUID=d898c458-3a28-4abf-9a28-c34d356c0046 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sdb2: Location of files loaded by Grub: ===================
35.4GB: boot/grub/core.img
46.2GB: boot/grub/grub.cfg
35.4GB: boot/initrd.img-2.6.32-21-generic
35.3GB: boot/initrd.img-2.6.32-22-generic
35.3GB: boot/vmlinuz-2.6.32-21-generic
35.4GB: boot/vmlinuz-2.6.32-22-generic
35.3GB: initrd.img
35.4GB: initrd.img.old
35.4GB: vmlinuz
35.3GB: vmlinuz.old
=========================== sdb3/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,3)
search --no-floppy --fs-uuid --set 20e08ddc-06bc-4f21-96ba-92563ad5cb63
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/06_mint_theme ###
insmod ext2
set root=(hd0,3)
search --no-floppy --fs-uuid --set 20e08ddc-06bc-4f21-96ba-92563ad5cb63
insmod png
if background_image /boot/grub/linuxmint.png ; then
set color_normal=white/black
set color_highlight=white/light-gray
else
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
fi
### END /etc/grub.d/06_mint_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (/dev/sda3)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,3)
search --no-floppy --fs-uuid --set 20e08ddc-06bc-4f21-96ba-92563ad5cb63
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=20e08ddc-06bc-4f21-96ba-92563ad5cb63 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,3)
search --no-floppy --fs-uuid --set 20e08ddc-06bc-4f21-96ba-92563ad5cb63
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=20e08ddc-06bc-4f21-96ba-92563ad5cb63 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb3/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda3 during installation
UUID=20e08ddc-06bc-4f21-96ba-92563ad5cb63 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda1 during installation
UUID=3a7ce152-9022-42d2-8069-088a8ce8d58d none swap sw 0 0
# swap was on /dev/sdb1 during installation
UUID=d898c458-3a28-4abf-9a28-c34d356c0046 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sdb3: Location of files loaded by Grub: ===================
49.1GB: boot/grub/core.img
49.1GB: boot/grub/grub.cfg
49.1GB: boot/initrd.img-2.6.31-14-generic
49.1GB: boot/vmlinuz-2.6.31-14-generic
49.1GB: initrd.img
49.1GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================
Unknown BootLoader on sdb4
00000000 b6 b6 ff 29 a2 b0 3b f9 ec 05 fa ca 1d 29 7f 7f |...)..;......)..|
00000010 a7 4f d9 43 ff d6 56 d7 f8 09 6c f9 bb 75 bd c4 |.O.C..V...l..u..|
00000020 17 16 03 a7 f1 72 3c 21 6f b7 fe 91 94 1c 07 f9 |.....r<!o.......|
00000030 5b 1e e9 6b 7d 70 2c c5 e7 b7 9a 5a fc f2 9c f6 |[..k}p,....Z....|
00000040 b7 d6 32 db e7 4f f6 ef d7 1d 70 21 3c 78 23 d5 |..2..O....p!<x#.|
00000050 ac 1b 56 ed eb 58 26 6b 1b cd 7e 7f 90 5a fd 5b |..V..X&k..~..Z.[|
00000060 ff 47 8e b1 b8 e8 74 ba 13 c5 f9 67 cb 9e d4 ad |.G....t....g....|
00000070 e5 0e 22 3f c1 2b 88 99 ed 94 fe f0 49 fb f0 8d |.."?.+......I...|
00000080 b9 63 c5 58 fe 10 f0 8d 63 26 b8 7c 22 b7 c7 95 |.c.X....c&.|"...|
00000090 b6 df 4d 63 f1 60 32 ff f2 a1 28 e3 06 b1 82 70 |..Mc.`2...(....p|
000000a0 17 e2 ef c9 6c d6 32 c6 b1 90 ff c2 39 45 22 dd |....l.2.....9E".|
000000b0 c6 38 9d 2c 56 e8 a7 cd 8c 12 7e 96 d6 ab 81 6d |.8.,V.....~....m|
000000c0 6b 29 7c b4 9e 24 7e f8 91 42 78 ab 1e 83 94 ac |k)|..$~..Bx.....|
000000d0 6b 1a df c4 68 34 0a 5f db 96 c5 36 ec 06 fd 05 |k...h4._...6....|
000000e0 fa 68 a4 21 23 f3 34 9a af aa 20 03 42 12 84 02 |.h.!#.4... .B...|
000000f0 29 20 09 09 60 12 eb 3b 78 e8 1c c9 17 70 ac 92 |) ..`..;x....p..|
00000100 20 9c 79 e3 d6 0b ac 9f 01 31 00 0f 80 9d 00 03 | .y......1......|
00000110 c0 57 c0 00 5d 3f f8 09 1c 00 3c f5 ff 3d 66 55 |.W..]?....<..=fU|
00000120 65 d3 e5 f0 12 58 00 78 09 4c 00 7c 04 a0 00 5e |e....X.x.L.|...^|
00000130 02 7c 00 1f 01 25 00 0e 55 cb 88 be 12 bc a5 f5 |.|...%..U.......|
00000140 3e 02 55 00 1f 34 e2 5b cd 0e 96 71 0a 18 36 d1 |>.U..4.[...q..6.|
00000150 e1 07 4b 7f 27 60 d9 95 59 5a 74 fd 95 b1 c4 6a |..K.'`..YZt....j|
00000160 c1 37 ae 0f 35 f8 8c e9 f2 fe 23 8c 1b 32 97 ff |.7..5.....#..2..|
00000170 8b bf 5f af de 03 0b 33 a8 b7 b8 86 a3 c0 42 c0 |.._....3......B.|
00000180 08 8c a1 66 28 78 41 ff 13 fc 05 6e fc bc d7 e5 |...f(xA....n....|
00000190 5c 38 36 f8 45 6a b8 1f 67 b2 28 7e 30 6d 5b b7 |\86.Ej..g.(~0m[.|
000001a0 2c 6b 1a b1 dd 2e 8f cf c2 09 5a a5 fd bb 04 b6 |,k........Z.....|
000001b0 f7 eb 78 0f c0 44 80 0a 38 d3 58 cb 55 8e 00 fe |..x..D..8.X.U...|
000001c0 ff ff 83 fe ff ff 02 00 00 00 26 4b 49 06 00 fe |..........&KI...|
000001d0 ff ff 05 fe ff ff 28 4b 49 06 cf b3 73 09 00 00 |......(KI...s...|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
Any help, guidance, walk thru, work around or a smack on my head is all appreciated.
Thanks,
Danial
Apologies if this was answered earlier. Thanks in advance for your attention. I admit that I am a noob - knows a little which makes it more dangerous than not knowing at all. :(
In brief, I am unable to boot one of the OS out of 3 I have installed. Everything is fresh install on newly formatted partitions.
Here are the details:
Two HDs - one is Sata and second is IDE.
Win7 installed on IDE (sdb2) then Ubuntu 9.10 on Sata (sda2) and lastly Linux Mint on Sata (sda3). Everyone was on its place - that is - Ubuntu 9.10 on sda2, Linux-Mint on sda3 and Win7 on sdb2.
Future of the day was bright and promising until I upgraded online to 10.04. After that, I was only able to boot to Win7 (IDE drive - sdb2 - not sure if it changed at that point or not) but no nix OS on Sata sda2 & sda3.
I downloaded 10.04 and installed from CD again on sda2. Well, now I am able to boot into Win7 and Ubuntu 10.04 but no Linux-Mint.
Another interesting thing is that sda and sdb have interchanged/swapped. So now if I chcek it thru gparted or run boot script, Sata drive shows up as sdb and IDE is now sda. In another post, I read that grub2 does that and make IDE drive as the first drive and Sata drive as second. Well, I buy that but why I am unable to boot to second OS on the same Sata drive? Evidently, I am missing something and I take that it is mostly user error but please -
With some guidance, I am sure I can learn something new. Here is the output of the boot_info_script055.sh:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks for
(UUID=20e08ddc-06bc-4f21-96ba-92563ad5cb63)/boot/grub.
=> Grub 2 is installed in the MBR of /dev/sdb and looks on the same drive in
partition #2 for /boot/grub.
sda1: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows 7
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/ntldr /NTDETECT.COM
sdb1: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdb2: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb3: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Linux Mint 8 Helena - Main
Edition
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb4: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: Unknown
Boot sector info:
sdb5: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb6: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb7: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb8: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb9: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb10: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb11: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
sdb12: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 63 10,233,404 10,233,342 82 Linux swap / Solaris
/dev/sda2 * 10,233,405 78,156,224 67,922,820 7 HPFS/NTFS
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sdb1 63 10,120,949 10,120,887 82 Linux swap / Solaris
/dev/sdb2 * 10,120,950 95,185,124 85,064,175 83 Linux
/dev/sdb3 95,185,125 180,249,299 85,064,175 83 Linux
/dev/sdb4 180,249,361 976,768,064 796,518,704 5 Extended
/dev/sdb5 180,249,363 285,716,024 105,466,662 83 Linux
/dev/sdb6 285,716,088 444,293,639 158,577,552 83 Linux
/dev/sdb7 444,293,703 602,871,254 158,577,552 83 Linux
/dev/sdb8 602,871,318 655,435,934 52,564,617 83 Linux
/dev/sdb9 655,435,998 708,000,614 52,564,617 83 Linux
/dev/sdb10 813,467,403 895,109,669 81,642,267 83 Linux
/dev/sdb11 895,109,733 976,768,064 81,658,332 83 Linux
/dev/sdb12 708,000,678 813,467,339 105,466,662 7 HPFS/NTFS
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/sda1 d898c458-3a28-4abf-9a28-c34d356c0046 swap swap
/dev/sda2 66B8B439B8B40A17 ntfs
/dev/sda: PTTYPE="dos"
/dev/sdb10 ce1aca59-ceda-4aef-8230-eb2996535daf ext4 Temp
/dev/sdb11 3f608fc3-eef3-4dfe-a755-5e83486bb0e5 ext4 Kachra
/dev/sdb12 73E1719801BBE72A ntfs Win-apps
/dev/sdb1 3a7ce152-9022-42d2-8069-088a8ce8d58d swap swap
/dev/sdb2 84781de9-0f61-474c-a56e-d6f455826462 ext4
/dev/sdb3 20e08ddc-06bc-4f21-96ba-92563ad5cb63 ext4 mint
/dev/sdb4: PTTYPE="dos"
/dev/sdb5 6e000c7f-2221-490e-818d-62a8d5d61578 ext4 Download
/dev/sdb6 2c97211d-9eb8-4520-9ea7-c091e58b3a3b ext4 Ganey
/dev/sdb7 846a0dc9-58ba-468d-9e19-1fc5b59715c4 ext4 Tasaveer
/dev/sdb8 b8aaa3ec-6996-486a-b9bb-aa3a954ff7c3 ext4 Kaghzat
/dev/sdb9 1d3711f4-d1cf-472d-b09b-f90667a033fa ext4 Linux-doc
/dev/sdb: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sdb2 / ext4 (rw,errors=remount-ro)
=========================== sdb2/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=84781de9-0f61-474c-a56e-d6f455826462 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=84781de9-0f61-474c-a56e-d6f455826462 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=84781de9-0f61-474c-a56e-d6f455826462 ro quiet splash
initrd /boot/initrd.img-2.6.32-21-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
echo 'Loading Linux 2.6.32-21-generic ...'
linux /boot/vmlinuz-2.6.32-21-generic root=UUID=84781de9-0f61-474c-a56e-d6f455826462 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-21-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd1,2)'
search --no-floppy --fs-uuid --set 84781de9-0f61-474c-a56e-d6f455826462
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda2)" {
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 66b8b439b8b40a17
chainloader +1
}
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (/dev/sda3) (on /dev/sdb3)" {
insmod ext2
set root='(hd1,3)'
search --no-floppy --fs-uuid --set 20e08ddc-06bc-4f21-96ba-92563ad5cb63
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=20e08ddc-06bc-4f21-96ba-92563ad5cb63 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (recovery mode) (on /dev/sdb3)" {
insmod ext2
set root='(hd1,3)'
search --no-floppy --fs-uuid --set 20e08ddc-06bc-4f21-96ba-92563ad5cb63
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=20e08ddc-06bc-4f21-96ba-92563ad5cb63 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb2/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc nodev,noexec,nosuid 0 0
# / was on /dev/sda2 during installation
UUID=84781de9-0f61-474c-a56e-d6f455826462 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda1 during installation
UUID=3a7ce152-9022-42d2-8069-088a8ce8d58d none swap sw 0 0
# swap was on /dev/sdb1 during installation
UUID=d898c458-3a28-4abf-9a28-c34d356c0046 none swap sw 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sdb2: Location of files loaded by Grub: ===================
35.4GB: boot/grub/core.img
46.2GB: boot/grub/grub.cfg
35.4GB: boot/initrd.img-2.6.32-21-generic
35.3GB: boot/initrd.img-2.6.32-22-generic
35.3GB: boot/vmlinuz-2.6.32-21-generic
35.4GB: boot/vmlinuz-2.6.32-22-generic
35.3GB: initrd.img
35.4GB: initrd.img.old
35.4GB: vmlinuz
35.3GB: vmlinuz.old
=========================== sdb3/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,3)
search --no-floppy --fs-uuid --set 20e08ddc-06bc-4f21-96ba-92563ad5cb63
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/06_mint_theme ###
insmod ext2
set root=(hd0,3)
search --no-floppy --fs-uuid --set 20e08ddc-06bc-4f21-96ba-92563ad5cb63
insmod png
if background_image /boot/grub/linuxmint.png ; then
set color_normal=white/black
set color_highlight=white/light-gray
else
set menu_color_normal=white/black
set menu_color_highlight=white/light-gray
fi
### END /etc/grub.d/06_mint_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (/dev/sda3)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,3)
search --no-floppy --fs-uuid --set 20e08ddc-06bc-4f21-96ba-92563ad5cb63
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=20e08ddc-06bc-4f21-96ba-92563ad5cb63 ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Linux Mint 8 Helena, linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,3)
search --no-floppy --fs-uuid --set 20e08ddc-06bc-4f21-96ba-92563ad5cb63
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=20e08ddc-06bc-4f21-96ba-92563ad5cb63 ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb3/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda3 during installation
UUID=20e08ddc-06bc-4f21-96ba-92563ad5cb63 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda1 during installation
UUID=3a7ce152-9022-42d2-8069-088a8ce8d58d none swap sw 0 0
# swap was on /dev/sdb1 during installation
UUID=d898c458-3a28-4abf-9a28-c34d356c0046 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sdb3: Location of files loaded by Grub: ===================
49.1GB: boot/grub/core.img
49.1GB: boot/grub/grub.cfg
49.1GB: boot/initrd.img-2.6.31-14-generic
49.1GB: boot/vmlinuz-2.6.31-14-generic
49.1GB: initrd.img
49.1GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================
Unknown BootLoader on sdb4
00000000 b6 b6 ff 29 a2 b0 3b f9 ec 05 fa ca 1d 29 7f 7f |...)..;......)..|
00000010 a7 4f d9 43 ff d6 56 d7 f8 09 6c f9 bb 75 bd c4 |.O.C..V...l..u..|
00000020 17 16 03 a7 f1 72 3c 21 6f b7 fe 91 94 1c 07 f9 |.....r<!o.......|
00000030 5b 1e e9 6b 7d 70 2c c5 e7 b7 9a 5a fc f2 9c f6 |[..k}p,....Z....|
00000040 b7 d6 32 db e7 4f f6 ef d7 1d 70 21 3c 78 23 d5 |..2..O....p!<x#.|
00000050 ac 1b 56 ed eb 58 26 6b 1b cd 7e 7f 90 5a fd 5b |..V..X&k..~..Z.[|
00000060 ff 47 8e b1 b8 e8 74 ba 13 c5 f9 67 cb 9e d4 ad |.G....t....g....|
00000070 e5 0e 22 3f c1 2b 88 99 ed 94 fe f0 49 fb f0 8d |.."?.+......I...|
00000080 b9 63 c5 58 fe 10 f0 8d 63 26 b8 7c 22 b7 c7 95 |.c.X....c&.|"...|
00000090 b6 df 4d 63 f1 60 32 ff f2 a1 28 e3 06 b1 82 70 |..Mc.`2...(....p|
000000a0 17 e2 ef c9 6c d6 32 c6 b1 90 ff c2 39 45 22 dd |....l.2.....9E".|
000000b0 c6 38 9d 2c 56 e8 a7 cd 8c 12 7e 96 d6 ab 81 6d |.8.,V.....~....m|
000000c0 6b 29 7c b4 9e 24 7e f8 91 42 78 ab 1e 83 94 ac |k)|..$~..Bx.....|
000000d0 6b 1a df c4 68 34 0a 5f db 96 c5 36 ec 06 fd 05 |k...h4._...6....|
000000e0 fa 68 a4 21 23 f3 34 9a af aa 20 03 42 12 84 02 |.h.!#.4... .B...|
000000f0 29 20 09 09 60 12 eb 3b 78 e8 1c c9 17 70 ac 92 |) ..`..;x....p..|
00000100 20 9c 79 e3 d6 0b ac 9f 01 31 00 0f 80 9d 00 03 | .y......1......|
00000110 c0 57 c0 00 5d 3f f8 09 1c 00 3c f5 ff 3d 66 55 |.W..]?....<..=fU|
00000120 65 d3 e5 f0 12 58 00 78 09 4c 00 7c 04 a0 00 5e |e....X.x.L.|...^|
00000130 02 7c 00 1f 01 25 00 0e 55 cb 88 be 12 bc a5 f5 |.|...%..U.......|
00000140 3e 02 55 00 1f 34 e2 5b cd 0e 96 71 0a 18 36 d1 |>.U..4.[...q..6.|
00000150 e1 07 4b 7f 27 60 d9 95 59 5a 74 fd 95 b1 c4 6a |..K.'`..YZt....j|
00000160 c1 37 ae 0f 35 f8 8c e9 f2 fe 23 8c 1b 32 97 ff |.7..5.....#..2..|
00000170 8b bf 5f af de 03 0b 33 a8 b7 b8 86 a3 c0 42 c0 |.._....3......B.|
00000180 08 8c a1 66 28 78 41 ff 13 fc 05 6e fc bc d7 e5 |...f(xA....n....|
00000190 5c 38 36 f8 45 6a b8 1f 67 b2 28 7e 30 6d 5b b7 |\86.Ej..g.(~0m[.|
000001a0 2c 6b 1a b1 dd 2e 8f cf c2 09 5a a5 fd bb 04 b6 |,k........Z.....|
000001b0 f7 eb 78 0f c0 44 80 0a 38 d3 58 cb 55 8e 00 fe |..x..D..8.X.U...|
000001c0 ff ff 83 fe ff ff 02 00 00 00 26 4b 49 06 00 fe |..........&KI...|
000001d0 ff ff 05 fe ff ff 28 4b 49 06 cf b3 73 09 00 00 |......(KI...s...|
000001e0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |..............U.|
00000200
Any help, guidance, walk thru, work around or a smack on my head is all appreciated.
Thanks,
Danial