mario-huizar
May 7th, 2010, 10:43 PM
HEllo all,
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.
This is my boot script output: Any hint will be appreciated..
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda1 and
looks at sector 519888342 of the same hard drive for
core.img, but core.img can not be found at this
location. No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sda2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda2 and
looks at sector 519873518 of the same hard drive for
core.img, but core.img can not be found at this
location. No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: ext4
Boot sector type: Grub
Boot sector info: Grub is installed in the boot sector of sda5 and looks
at sector 519873750 of the same hard drive for the
stage2 file, but no stage2 files can be found at this
location.
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/core.img
sda6: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 2,048 3,074,047 3,072,000 27 Hidden HPFS/NTFS
/dev/sda2 * 3,074,088 519,590,294 516,516,207 7 HPFS/NTFS
/dev/sda3 519,590,295 625,137,344 105,547,050 5 Extended
/dev/sda5 519,590,358 620,735,534 101,145,177 83 Linux
/dev/sda6 620,735,598 625,137,344 4,401,747 82 Linux swap / Solaris
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/sda1 B89E85849E853BBE ntfs TOSHIBA SYSTEM VOLUME
/dev/sda2 F4E8B4F6E8B4B866 ntfs Mario
/dev/sda3: PTTYPE="dos"
/dev/sda5 05256b8a-fb03-4e43-9814-b7c698a5e8c8 ext4
/dev/sda6 8de50eea-fb00-4bfb-8237-a46183255d80 swap
/dev/sda: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda5 / ext4 (rw,errors=remount-ro)
=========================== sda5/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=05256b8a-fb03-4e43-9814-b7c698a5e8c8
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
uuid 05256b8a-fb03-4e43-9814-b7c698a5e8c8
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode)
uuid 05256b8a-fb03-4e43-9814-b7c698a5e8c8
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro single
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-21-generic
uuid 05256b8a-fb03-4e43-9814-b7c698a5e8c8
kernel /boot/vmlinuz-2.6.31-21-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro quiet splash
initrd /boot/initrd.img-2.6.31-21-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.31-21-generic (recovery mode)
uuid 05256b8a-fb03-4e43-9814-b7c698a5e8c8
kernel /boot/vmlinuz-2.6.31-21-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro single
initrd /boot/initrd.img-2.6.31-21-generic
title Chainload into GRUB 2
root 05256b8a-fb03-4e43-9814-b7c698a5e8c8
kernel /boot/grub/core.img
title Ubuntu 10.04 LTS, memtest86+
uuid 05256b8a-fb03-4e43-9814-b7c698a5e8c8
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
=========================== sda5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
linux /boot/vmlinuz-2.6.31-21-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro quiet splash
initrd /boot/initrd.img-2.6.31-21-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
echo 'Loading Linux 2.6.31-21-generic ...'
linux /boot/vmlinuz-2.6.31-21-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.31-21-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Recovery Environment (loader) (on /dev/sda2)" {
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs-uuid --set f4e8b4f6e8b4b866
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=8de50eea-fb00-4bfb-8237-a46183255d80 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda5: Location of files loaded by Grub: ===================
266.1GB: boot/grub/core.img
266.2GB: boot/grub/grub.cfg
269.2GB: boot/grub/menu.lst
266.1GB: boot/grub/stage2
297.7GB: boot/initrd.img-2.6.31-21-generic
267.5GB: boot/initrd.img-2.6.32-22-generic
267.5GB: boot/vmlinuz-2.6.31-21-generic
267.5GB: boot/vmlinuz-2.6.32-22-generic
267.5GB: initrd.img
297.7GB: initrd.img.old
267.5GB: vmlinuz
267.5GB: vmlinuz.old
Regards!
Mario Huizar
I had 9.10 installed and I did an upgrade to 10.04. However I cannot see anymore my Windows Vista partition with grub.. I have a Toshiba laptop Satellite p305.
This is my boot script output: Any hint will be appreciated..
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
sda1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda1 and
looks at sector 519888342 of the same hard drive for
core.img, but core.img can not be found at this
location. No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
sda2: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Grub 2
Boot sector info: Grub 2 is installed in the boot sector of sda2 and
looks at sector 519873518 of the same hard drive for
core.img, but core.img can not be found at this
location. No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
sda3: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: ext4
Boot sector type: Grub
Boot sector info: Grub is installed in the boot sector of sda5 and looks
at sector 519873750 of the same hard drive for the
stage2 file, but no stage2 files can be found at this
location.
Operating System: Ubuntu 10.04 LTS
Boot files/dirs: /boot/grub/menu.lst /boot/grub/grub.cfg /etc/fstab
/boot/grub/core.img
sda6: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 2,048 3,074,047 3,072,000 27 Hidden HPFS/NTFS
/dev/sda2 * 3,074,088 519,590,294 516,516,207 7 HPFS/NTFS
/dev/sda3 519,590,295 625,137,344 105,547,050 5 Extended
/dev/sda5 519,590,358 620,735,534 101,145,177 83 Linux
/dev/sda6 620,735,598 625,137,344 4,401,747 82 Linux swap / Solaris
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/sda1 B89E85849E853BBE ntfs TOSHIBA SYSTEM VOLUME
/dev/sda2 F4E8B4F6E8B4B866 ntfs Mario
/dev/sda3: PTTYPE="dos"
/dev/sda5 05256b8a-fb03-4e43-9814-b7c698a5e8c8 ext4
/dev/sda6 8de50eea-fb00-4bfb-8237-a46183255d80 swap
/dev/sda: PTTYPE="dos"
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
/dev/sda5 / ext4 (rw,errors=remount-ro)
=========================== sda5/boot/grub/menu.lst: ===========================
# menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-legacy-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0
## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3
## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu
# Pretty colours
#color cyan/blue white/blue
## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret
#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#
#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST
### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below
## DO NOT UNCOMMENT THEM, Just edit them to your needs
## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro
## default grub root device
## e.g. groot=(hd0,0)
# groot=05256b8a-fb03-4e43-9814-b7c698a5e8c8
## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true
## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false
## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash
## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false
## Xen hypervisor options to use with the default Xen boot option
# xenhopt=
## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0
## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single
## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all
## specify if running in Xen domU or have grub detect automatically
## update-grub will ignore non-xen kernels when running in domU and vice versa
## e.g. indomU=detect
## indomU=true
## indomU=false
# indomU=detect
## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true
## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false
## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false
## ## End Default Options ##
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic
uuid 05256b8a-fb03-4e43-9814-b7c698a5e8c8
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.32-22-generic (recovery mode)
uuid 05256b8a-fb03-4e43-9814-b7c698a5e8c8
kernel /boot/vmlinuz-2.6.32-22-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro single
initrd /boot/initrd.img-2.6.32-22-generic
title Ubuntu 10.04 LTS, kernel 2.6.31-21-generic
uuid 05256b8a-fb03-4e43-9814-b7c698a5e8c8
kernel /boot/vmlinuz-2.6.31-21-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro quiet splash
initrd /boot/initrd.img-2.6.31-21-generic
quiet
title Ubuntu 10.04 LTS, kernel 2.6.31-21-generic (recovery mode)
uuid 05256b8a-fb03-4e43-9814-b7c698a5e8c8
kernel /boot/vmlinuz-2.6.31-21-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro single
initrd /boot/initrd.img-2.6.31-21-generic
title Chainload into GRUB 2
root 05256b8a-fb03-4e43-9814-b7c698a5e8c8
kernel /boot/grub/core.img
title Ubuntu 10.04 LTS, memtest86+
uuid 05256b8a-fb03-4e43-9814-b7c698a5e8c8
kernel /boot/memtest86+.bin
quiet
### END DEBIAN AUTOMAGIC KERNELS LIST
=========================== sda5/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
set saved_entry=${prev_saved_entry}
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z ${boot_once} ]; then
saved_entry=${chosen}
save_env saved_entry
fi
}
function recordfail {
set recordfail=1
if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/light-gray
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-22-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro quiet splash
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.32-22-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
echo 'Loading Linux 2.6.32-22-generic ...'
linux /boot/vmlinuz-2.6.32-22-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.32-22-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-21-generic' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
linux /boot/vmlinuz-2.6.31-21-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro quiet splash
initrd /boot/initrd.img-2.6.31-21-generic
}
menuentry 'Ubuntu, with Linux 2.6.31-21-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
recordfail
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
echo 'Loading Linux 2.6.31-21-generic ...'
linux /boot/vmlinuz-2.6.31-21-generic root=UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 ro single
echo 'Loading initial ramdisk ...'
initrd /boot/initrd.img-2.6.31-21-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
insmod ext2
set root='(hd0,5)'
search --no-floppy --fs-uuid --set 05256b8a-fb03-4e43-9814-b7c698a5e8c8
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows Recovery Environment (loader) (on /dev/sda2)" {
insmod ntfs
set root='(hd0,2)'
search --no-floppy --fs-uuid --set f4e8b4f6e8b4b866
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda5/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda5 during installation
UUID=05256b8a-fb03-4e43-9814-b7c698a5e8c8 / ext4 errors=remount-ro 0 1
# swap was on /dev/sda6 during installation
UUID=8de50eea-fb00-4bfb-8237-a46183255d80 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sda5: Location of files loaded by Grub: ===================
266.1GB: boot/grub/core.img
266.2GB: boot/grub/grub.cfg
269.2GB: boot/grub/menu.lst
266.1GB: boot/grub/stage2
297.7GB: boot/initrd.img-2.6.31-21-generic
267.5GB: boot/initrd.img-2.6.32-22-generic
267.5GB: boot/vmlinuz-2.6.31-21-generic
267.5GB: boot/vmlinuz-2.6.32-22-generic
267.5GB: initrd.img
297.7GB: initrd.img.old
267.5GB: vmlinuz
267.5GB: vmlinuz.old
Regards!
Mario Huizar