Cyclops_
May 3rd, 2010, 04:03 AM
Hey all,
Here is my issue:
Upon upgrading from Karmic to Lucid, Everything comes up, seemingly fine. Once logged in to the OS, my three monitors show the desktop wallpaper as well as all the icons on the desktop. A few programs that I have set to autostart do so.
However for some reason, I can only access one of the three monitors. (And not the one with the gnome-panel.) As soon as I drag my mouse from my third monitor onto the one next to it, I loose complete control of it, and it starts dancing all over the place. If I try to drag a window from one screen to the next (using Alt-Left CLick + drag and not moving the mouse onto the other monitor), the the app goes from one side of the working monitor to the other side (like it's wrapping around). Though I can see it on the other monitor for a little bit until I get it far enough for it to wrap.
Here is my xorg.conf:
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
#FontPath "/usr/share/fonts/X11/util"
#FontPath "/usr/share/fonts/X11/encodings"
#FontPath "unix/:7100"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 75.0
VertRefresh 56.0 - 61.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "KTC W2408S"
HorizSync 31.0 - 75.0
VertRefresh 56.0 - 63.0
#Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "Unknown"
ModelName "NTS MB24W"
HorizSync 30.0 - 74.0
VertRefresh 50.0 - 61.0
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
Option "AllowGLXWithComposite" "true"
Option "UseCompositeWrapper" "true"
Option "NoLogo" "True"
Option "backingstore" "true"
Option "TripleBuffer" "true"
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "AllowGLXWithComposite" "true"
Option "UseCompositeWrapper" "true"
Option "AddARGBGLXVisuals" "true"
Option "NoLogo" "True"
Option "backingstore" "true"
Option "TripleBuffer" "true"
Option "TwinView" "0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
# Removed Option "TwinView" "1"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "glx"
Disable "dri2"
#Load "freetype"
#Disable "dri2"
#Load "dri"
#Load "type1"
EndSection
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
#Section "InputDevice"
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/psaux"
# Option "Emulate3Buttons" "no"
# Option "ZAxisMapping" "4 5"
#EndSection
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
#Section "InputDevice"
# Identifier "Keyboard0"
# Driver "kbd"
#EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 3840 0
Screen 1 "Screen1" 0 0
Screen 2 "Screen2" 1920 0
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
# InputDevice "Keyboard0" "CoreKeyboard"
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
# InputDevice "Mouse0" "CorePointer"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
Option "Xinerama" "1"
Option "AIGLX" "true"
#Option "XGL" "true"
EndSection
Section "Device"
Identifier "Device0"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
BusID "PCI:3:0:0"
Screen 0
Driver "nvidia"
EndSection
Section "Device"
Identifier "Device1"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
BusID "PCI:4:0:0"
Driver "nvidia"
EndSection
Section "Device"
Identifier "Device2"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
Option "AllowGLXWithComposite" "true"
Option "UseCompositeWrapper" "true"
Option "NoLogo" "True"
Option "backingstore" "true"
Option "TripleBuffer" "true"
Option "AddARGBGLXVisuals" "true"
BusID "PCI:3:0:0"
Screen 1
Driver "nvidia"
#Option "XAANoOffscreenPixmaps"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Let me know what else I can post that will help!
Thanks!
Here is my issue:
Upon upgrading from Karmic to Lucid, Everything comes up, seemingly fine. Once logged in to the OS, my three monitors show the desktop wallpaper as well as all the icons on the desktop. A few programs that I have set to autostart do so.
However for some reason, I can only access one of the three monitors. (And not the one with the gnome-panel.) As soon as I drag my mouse from my third monitor onto the one next to it, I loose complete control of it, and it starts dancing all over the place. If I try to drag a window from one screen to the next (using Alt-Left CLick + drag and not moving the mouse onto the other monitor), the the app goes from one side of the working monitor to the other side (like it's wrapping around). Though I can see it on the other monitor for a little bit until I get it far enough for it to wrap.
Here is my xorg.conf:
Section "Files"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/share/fonts/X11/100dpi"
FontPath "/usr/share/fonts/X11/75dpi"
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
#FontPath "/usr/share/fonts/X11/util"
#FontPath "/usr/share/fonts/X11/encodings"
#FontPath "unix/:7100"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 75.0
VertRefresh 56.0 - 61.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Unknown"
ModelName "KTC W2408S"
HorizSync 31.0 - 75.0
VertRefresh 56.0 - 63.0
#Option "DPMS"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "Unknown"
ModelName "NTS MB24W"
HorizSync 30.0 - 74.0
VertRefresh 50.0 - 61.0
Option "DPMS"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
Option "AllowGLXWithComposite" "true"
Option "UseCompositeWrapper" "true"
Option "NoLogo" "True"
Option "backingstore" "true"
Option "TripleBuffer" "true"
Option "TwinView" "0"
Option "TwinViewXineramaInfoOrder" "DFP-0"
Option "metamodes" "DFP-0: nvidia-auto-select +0+0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Device1"
Monitor "Monitor1"
DefaultDepth 24
Option "AllowGLXWithComposite" "true"
Option "UseCompositeWrapper" "true"
Option "AddARGBGLXVisuals" "true"
Option "NoLogo" "True"
Option "backingstore" "true"
Option "TripleBuffer" "true"
Option "TwinView" "0"
Option "metamodes" "nvidia-auto-select +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "Device2"
Monitor "Monitor2"
DefaultDepth 24
Option "AllowGLXWithComposite" "true"
Option "AddARGBGLXVisuals" "True"
Option "TwinView" "0"
Option "metamodes" "DFP-1: nvidia-auto-select +0+0"
# Removed Option "TwinView" "1"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "glx"
Disable "dri2"
#Load "freetype"
#Disable "dri2"
#Load "dri"
#Load "type1"
EndSection
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
#Section "InputDevice"
# Identifier "Mouse0"
# Driver "mouse"
# Option "Protocol" "auto"
# Option "Device" "/dev/psaux"
# Option "Emulate3Buttons" "no"
# Option "ZAxisMapping" "4 5"
#EndSection
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
#Section "InputDevice"
# Identifier "Keyboard0"
# Driver "kbd"
#EndSection
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 3840 0
Screen 1 "Screen1" 0 0
Screen 2 "Screen2" 1920 0
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
# InputDevice "Keyboard0" "CoreKeyboard"
# commented out by update-manager, HAL is now used and auto-detects devices
# Keyboard settings are now read from /etc/default/console-setup
# InputDevice "Mouse0" "CorePointer"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
Option "Xinerama" "1"
Option "AIGLX" "true"
#Option "XGL" "true"
EndSection
Section "Device"
Identifier "Device0"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
BusID "PCI:3:0:0"
Screen 0
Driver "nvidia"
EndSection
Section "Device"
Identifier "Device1"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
BusID "PCI:4:0:0"
Driver "nvidia"
EndSection
Section "Device"
Identifier "Device2"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 250"
Option "AllowGLXWithComposite" "true"
Option "UseCompositeWrapper" "true"
Option "NoLogo" "True"
Option "backingstore" "true"
Option "TripleBuffer" "true"
Option "AddARGBGLXVisuals" "true"
BusID "PCI:3:0:0"
Screen 1
Driver "nvidia"
#Option "XAANoOffscreenPixmaps"
EndSection
Section "ServerFlags"
Option "Xinerama" "0"
EndSection
Let me know what else I can post that will help!
Thanks!