KellanStec
May 1st, 2010, 07:07 AM
Greetings,
I am having some issues with an upgrade I performed.
I was running a hardware RAID 1 mirroring on two 1 TB drives on my ASUS M2N motherboard in version 9.10. All was working fine.
I upgraded to 10.04 today, and suddenly the RAIDed device that was presented to the operating system is no longer available, but I do see both devices listed as mountable, and all of my data is on them. They both have the same uuid.
I noticed on boot after grub does its thing, I see an error on the screen for less than a second:
nForce2_smbus 0000:00:01.1: Error probing SMB2
I see the following in /var/log/dmesg:
[ 33.866002] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 33.866006] ACPI: resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM00 [0x001c40-0x001c45]
[ 33.866008] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 33.866011] nForce2_smbus 0000:00:01.1: Error probing SMB2.
I am wondering if these are related somehow, but am unsure where to start looking.
I did verify that RAID is still configured in my BIOS, and it seems to be working just as it was before the upgrade. For some reason, Ubuntu is not seeing the RAIDed device presented to it by the hardware, and is instead seeing the devices individually.
Here is some output of lspci:
00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0360] (rev a3)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at fc00 [size=64]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c40 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_amd
Kernel modules: pata_amd
00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
Kernel modules: sata_nv
00:05.1 RAID bus controller [0104]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
Kernel modules: sata_nv
00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at c400 [size=8]
Region 1: I/O ports at c000 [size=4]
Region 2: I/O ports at bc00 [size=8]
Region 3: I/O ports at b800 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
Kernel modules: sata_nv
00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
Capabilities: [b8] Subsystem: nVidia Corporation Device [10de:cb84]
Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81f6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 26
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b000 [size=8]
Region 2: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fe028000 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
Vector table: BAR=2 offset=00000000
PBA: BAR=3 offset=00000000
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
Address: 00000000fee0100c Data: 4189
Masking: 000000fe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 27
Region 0: Memory at fe027000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at ac00 [size=8]
Region 2: Memory at fe026000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fe025000 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
Vector table: BAR=2 offset=00000000
PBA: BAR=3 offset=00000000
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
Address: 00000000fee0300c Data: 4191
Masking: 000000fe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:0e.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0375] (rev a3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00008000-00009fff
Memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4149
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4151
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: amd64_edac_mod
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:0b.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:808b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fdef8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394
02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:81e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at fddfe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fdde0000 [disabled] [size=64K]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1 <16us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: ahci
Kernel modules: ahci
02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:81e4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at 9800 [size=4]
Region 2: I/O ports at 9400 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8c00 [size=16]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_jmicron
Kernel modules: pata_jmicron
03:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8500 GT] [10de:0421] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8256]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 7c00 [size=128]
[virtual] Expansion ROM at fbfe0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information <?>
Kernel driver in use: nvidia
Kernel modules: nvidia-current, nvidiafb, nouveau
Here is /var/log/dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] Command line: root=UUID=2be8c467-bb5e-40b9-96cc-b11a4d1d517f ro quiet splash acpi_enforce_resources=lax
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00BFF00000 mask FFFFF00000 uncachable
[ 0.000000] 3 base 0100000000 mask FF00000000 write-back
[ 0.000000] 4 base 0200000000 mask FFE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000220000000 aka 8704M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009c400 (usable)
[ 0.000000] modified: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfee0000 (usable)
[ 0.000000] modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] modified: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
[ 0.000000] modified: 00000000bfef0000 - 00000000bff00000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfee0000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfee0000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0100000000 - 0220000000 page 2M
[ 0.000000] kernel direct mapping tables up to 220000000 @ 13000-1d000
[ 0.000000] RAMDISK: 377ff000 - 37feff2a
[ 0.000000] ACPI: RSDP 00000000000f7c80 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000bfee3100 00044 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000bfeead40 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000bfee3280 07A51 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfee0000 00040
[ 0.000000] ACPI: HPET 00000000bfeeaf80 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000bfeeb000 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000bfeeae80 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [0000000000018000 - 000000000001cfff]
[ 0.000000] bootmap [000000000001d000 - 0000000000060fff] pages 44
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0220000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64]
[ 0.000000] #3 [00377ff000 - 0037feff2a] RAMDISK ==> [00377ff000 - 0037feff2a]
[ 0.000000] #4 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 - 0000100000]
[ 0.000000] #5 [0001a2a000 - 0001a2a155] BRK ==> [0001a2a000 - 0001a2a155]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 0000018000] PGTABLE ==> [0000013000 - 0000018000]
[ 0.000000] found SMP MP-table at [ffff8800000f5bd0] f5bd0
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880028600000-ffff88002effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x000bfee0
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] On node 0 totalpages: 1965676
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 110 pages reserved
[ 0.000000] DMA zone: 3814 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767768 pages, LIFO batch:31
[ 0.000000] Normal zone: 16128 pages used for memmap
[ 0.000000] Normal zone: 1163520 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000
[ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000
[ 0.000000] PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:30100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288
[ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1935102
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=2be8c467-bb5e-40b9-96cc-b11a4d1d517f ro quiet splash acpi_enforce_resources=lax
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ ed98000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 7669264k/8912896k available (5409k kernel code, 1050192k absent, 193440k reserved, 2976k data, 876k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 78643200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3214.991 MHz processor.
[ 0.010004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6429.98 BogoMIPS (lpj=32149910)
[ 0.010023] Security Framework initialized
[ 0.010037] AppArmor: AppArmor initialized
[ 0.010514] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.013923] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015544] Mount-cache hash table entries: 256
[ 0.015650] Initializing cgroup subsys ns
[ 0.015653] Initializing cgroup subsys cpuacct
[ 0.015656] Initializing cgroup subsys memory
[ 0.015662] Initializing cgroup subsys devices
[ 0.015664] Initializing cgroup subsys freezer
[ 0.015665] Initializing cgroup subsys net_cls
[ 0.015680] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.015681] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.015683] CPU 0/0x0 -> Node 0
[ 0.015684] tseg: 00bff00000
[ 0.015685] CPU: Physical Processor ID: 0
[ 0.015687] CPU: Processor Core ID: 0
[ 0.015689] mce: CPU supports 5 MCE banks
[ 0.015696] using C1E aware idle routine
[ 0.015697] Performance Events: AMD PMU driver.
[ 0.015701] ... version: 0
[ 0.015702] ... bit width: 48
[ 0.015703] ... generic registers: 4
[ 0.015704] ... value mask: 0000ffffffffffff
[ 0.015705] ... max period: 00007fffffffffff
[ 0.015706] ... fixed-purpose events: 0
[ 0.015707] ... event mask: 000000000000000f
[ 0.016837] ACPI: Core revision 20090903
[ 0.027106] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.027114] ftrace: allocating 22518 entries in 89 pages
[ 0.030066] Setting APIC routing to flat
[ 0.030492] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.131493] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ stepping 03
[ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.020000] Initializing CPU#1
[ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.020000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.020000] CPU 1/0x1 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 1
[ 0.290033] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ stepping 03
[ 0.290046] Brought up 2 CPUs
[ 0.290048] Total of 2 processors activated (12859.59 BogoMIPS).
[ 0.290219] CPU0 attaching sched-domain:
[ 0.290221] domain 0: span 0-1 level MC
[ 0.290222] groups: 0 1
[ 0.290226] CPU1 attaching sched-domain:
[ 0.290227] domain 0: span 0-1 level MC
[ 0.290229] groups: 1 0
[ 0.290285] devtmpfs: initialized
[ 0.290285] regulator: core version 0.5
[ 0.290285] Time: 5:35:39 Date: 05/01/10
[ 0.290285] NET: Registered protocol family 16
[ 0.290285] node 0 link 0: io port [7000, ffff]
[ 0.290285] TOM: 00000000c0000000 aka 3072M
[ 0.290285] node 0 link 0: mmio [a0000, bffff]
[ 0.290285] Trying to unpack rootfs image as initramfs...
[ 0.290285] node 0 link 0: mmio [c0000000, efffffff]
[ 0.290285] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.290285] node 0 link 0: mmio [f0000000, f03fffff]
[ 0.290285] TOM2: 0000000220000000 aka 8704M
[ 0.290285] bus: [00,03] on node 0 link 0
[ 0.290285] bus: 00 index 0 io port: [0, ffff]
[ 0.290285] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.290285] bus: 00 index 2 mmio: [c0000000, f3ffffff]
[ 0.290285] bus: 00 index 3 mmio: [f4000000, ffffffff]
[ 0.290285] bus: 00 index 4 mmio: [220000000, fcffffffff]
[ 0.290285] ACPI: bus type pci registered
[ 0.290285] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.290285] PCI: MCFG area at f0000000 reserved in E820
[ 0.291934] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.291935] PCI: Using configuration type 1 for base access
[ 0.300075] bio: create slab <bio-0> at 0
[ 0.300714] ACPI: EC: Look up EC in DSDT
[ 0.308102] ACPI: Interpreter enabled
[ 0.308108] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.308130] ACPI: Using IOAPIC for interrupt routing
[ 0.315753] ACPI: No dock devices found.
[ 0.315842] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.316038] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f]
[ 0.316048] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.316051] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
[ 0.316069] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.316073] pci 0000:00:01.1: PME# disabled
[ 0.316094] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.316110] pci 0000:00:02.0: supports D1 D2
[ 0.316111] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316113] pci 0000:00:02.0: PME# disabled
[ 0.316128] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[ 0.316144] pci 0000:00:02.1: supports D1 D2
[ 0.316145] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316147] pci 0000:00:02.1: PME# disabled
[ 0.316168] pci 0000:00:04.0: reg 20 io port: [0xf000-0xf00f]
[ 0.316189] pci 0000:00:05.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.316192] pci 0000:00:05.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.316194] pci 0000:00:05.0: reg 18 io port: [0x970-0x977]
[ 0.316197] pci 0000:00:05.0: reg 1c io port: [0xb70-0xb73]
[ 0.316200] pci 0000:00:05.0: reg 20 io port: [0xdc00-0xdc0f]
[ 0.316203] pci 0000:00:05.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.316226] pci 0000:00:05.1: reg 10 io port: [0x9e0-0x9e7]
[ 0.316229] pci 0000:00:05.1: reg 14 io port: [0xbe0-0xbe3]
[ 0.316232] pci 0000:00:05.1: reg 18 io port: [0x960-0x967]
[ 0.316234] pci 0000:00:05.1: reg 1c io port: [0xb60-0xb63]
[ 0.316237] pci 0000:00:05.1: reg 20 io port: [0xc800-0xc80f]
[ 0.316240] pci 0000:00:05.1: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.316263] pci 0000:00:05.2: reg 10 io port: [0xc400-0xc407]
[ 0.316265] pci 0000:00:05.2: reg 14 io port: [0xc000-0xc003]
[ 0.316268] pci 0000:00:05.2: reg 18 io port: [0xbc00-0xbc07]
[ 0.316271] pci 0000:00:05.2: reg 1c io port: [0xb800-0xb803]
[ 0.316274] pci 0000:00:05.2: reg 20 io port: [0xb400-0xb40f]
[ 0.316276] pci 0000:00:05.2: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.316324] pci 0000:00:06.1: reg 10 32bit mmio: [0xfe020000-0xfe023fff]
[ 0.316342] pci 0000:00:06.1: PME# supported from D3hot D3cold
[ 0.316345] pci 0000:00:06.1: PME# disabled
[ 0.316372] pci 0000:00:08.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
[ 0.316375] pci 0000:00:08.0: reg 14 io port: [0xb000-0xb007]
[ 0.316378] pci 0000:00:08.0: reg 18 32bit mmio: [0xfe029000-0xfe0290ff]
[ 0.316380] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfe028000-0xfe02800f]
[ 0.316397] pci 0000:00:08.0: supports D1 D2
[ 0.316398] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316401] pci 0000:00:08.0: PME# disabled
[ 0.316425] pci 0000:00:09.0: reg 10 32bit mmio: [0xfe027000-0xfe027fff]
[ 0.316428] pci 0000:00:09.0: reg 14 io port: [0xac00-0xac07]
[ 0.316430] pci 0000:00:09.0: reg 18 32bit mmio: [0xfe026000-0xfe0260ff]
[ 0.316433] pci 0000:00:09.0: reg 1c 32bit mmio: [0xfe025000-0xfe02500f]
[ 0.316450] pci 0000:00:09.0: supports D1 D2
[ 0.316451] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316454] pci 0000:00:09.0: PME# disabled
[ 0.316484] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316486] pci 0000:00:0e.0: PME# disabled
[ 0.316511] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316513] pci 0000:00:0f.0: PME# disabled
[ 0.316595] pci 0000:01:0b.0: reg 10 32bit mmio: [0xfdeff000-0xfdeff7ff]
[ 0.316599] pci 0000:01:0b.0: reg 14 32bit mmio: [0xfdef8000-0xfdefbfff]
[ 0.316622] pci 0000:01:0b.0: supports D1 D2
[ 0.316623] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot
[ 0.316625] pci 0000:01:0b.0: PME# disabled
[ 0.316643] pci 0000:00:06.0: transparent bridge
[ 0.316646] pci 0000:00:06.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.316702] pci 0000:02:00.0: reg 24 32bit mmio: [0xfddfe000-0xfddfffff]
[ 0.316708] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfdde0000-0xfddeffff]
[ 0.316728] pci 0000:02:00.0: PME# supported from D3hot
[ 0.316732] pci 0000:02:00.0: PME# disabled
[ 0.316766] pci 0000:02:00.1: reg 10 io port: [0x9c00-0x9c07]
[ 0.316772] pci 0000:02:00.1: reg 14 io port: [0x9800-0x9803]
[ 0.316778] pci 0000:02:00.1: reg 18 io port: [0x9400-0x9407]
[ 0.316783] pci 0000:02:00.1: reg 1c io port: [0x9000-0x9003]
[ 0.316789] pci 0000:02:00.1: reg 20 io port: [0x8c00-0x8c0f]
[ 0.316850] pci 0000:00:0e.0: bridge io port: [0x8000-0x9fff]
[ 0.316852] pci 0000:00:0e.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.316873] pci 0000:03:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.316879] pci 0000:03:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.316885] pci 0000:03:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.316889] pci 0000:03:00.0: reg 24 io port: [0x7c00-0x7c7f]
[ 0.316893] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfbfe0000-0xfbffffff]
[ 0.316937] pci 0000:00:0f.0: bridge io port: [0x7000-0x7fff]
[ 0.316939] pci 0000:00:0f.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.316942] pci 0000:00:0f.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.316950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.317174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.359095] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.359231] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.359365] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.359499] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.359634] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.359770] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
[ 0.359905] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[ 0.360058] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.360192] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.360326] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.360461] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 0.360595] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)
[ 0.360730] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[ 0.360864] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.360998] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.361132] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.361266] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.361402] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[ 0.361537] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[ 0.361673] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[ 0.361842] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.362006] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.362169] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.362332] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.362495] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.362658] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.362821] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[ 0.362984] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.363149] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.363316] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.363479] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[ 0.363642] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.363805] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.363968] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.364131] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.364294] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.364457] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.364620] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.364783] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.364947] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[ 0.365043] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.365044] vgaarb: loaded
[ 0.365116] SCSI subsystem initialized
[ 0.365183] libata version 3.00 loaded.
[ 0.365228] usbcore: registered new interface driver usbfs
[ 0.365236] usbcore: registered new interface driver hub
[ 0.365253] usbcore: registered new device driver usb
[ 0.365349] ACPI: WMI: Mapper loaded
[ 0.365350] PCI: Using ACPI for IRQ routing
[ 0.365463] NetLabel: Initializing
[ 0.365464] NetLabel: domain hash size = 128
[ 0.365465] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.365475] NetLabel: unlabeled traffic allowed by default
[ 0.365501] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[ 0.365504] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.370035] Switching to clocksource hpet
[ 0.371192] AppArmor: AppArmor Filesystem Enabled
[ 0.371206] pnp: PnP ACPI init
[ 0.371219] ACPI: bus type pnp registered
[ 0.375247] pnp: PnP ACPI: found 12 devices
[ 0.375248] ACPI: ACPI bus type pnp unregistered
[ 0.375259] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.375261] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.375263] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.375265] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.375267] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.375269] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.375273] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.375274] system 00:02: ioport range 0x800-0x801 has been reserved
[ 0.375276] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.375281] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.375285] system 00:0b: iomem range 0xda800-0xdbfff has been reserved
[ 0.375287] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.375289] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.375291] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[ 0.375293] system 00:0b: iomem range 0xfefff000-0xfefff0ff has been reserved
[ 0.375295] system 00:0b: iomem range 0xbfee0000-0xbfefffff could not be reserved
[ 0.375297] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.375299] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.375301] system 00:0b: iomem range 0x100000-0xbfedffff could not be reserved
[ 0.375303] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.375305] system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.375307] system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved
[ 0.375310] system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.375312] system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.375314] system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.379988] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
[ 0.379990] pci 0000:00:06.0: IO window: disabled
[ 0.379992] pci 0000:00:06.0: MEM window: 0xfde00000-0xfdefffff
[ 0.379994] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.379997] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
[ 0.379999] pci 0000:00:0e.0: IO window: 0x8000-0x9fff
[ 0.380007] pci 0000:00:0e.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.380009] pci 0000:00:0e.0: PREFETCH window: disabled
[ 0.380011] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:03
[ 0.380013] pci 0000:00:0f.0: IO window: 0x7000-0x7fff
[ 0.380015] pci 0000:00:0f.0: MEM window: 0xf8000000-0xfbffffff
[ 0.380018] pci 0000:00:0f.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.380024] pci 0000:00:06.0: setting latency timer to 64
[ 0.380028] pci 0000:00:0e.0: setting latency timer to 64
[ 0.380031] pci 0000:00:0f.0: setting latency timer to 64
[ 0.380034] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.380036] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.380038] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.380039] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.380041] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.380043] pci_bus 0000:02: resource 0 io: [0x8000-0x9fff]
[ 0.380044] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.380046] pci_bus 0000:03: resource 0 io: [0x7000-0x7fff]
[ 0.380048] pci_bus 0000:03: resource 1 mem: [0xf8000000-0xfbffffff]
[ 0.380049] pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.380078] NET: Registered protocol family 2
[ 0.380273] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.381965] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.385278] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.385609] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.385611] TCP reno registered
[ 0.385689] NET: Registered protocol family 1
[ 0.400099] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400144] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400186] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400229] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400273] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400324] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400380] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400439] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400500] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400517] pci 0000:03:00.0: Boot video device
[ 0.400640] PCI-DMA: Disabling AGP.
[ 0.400696] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.400697] PCI-DMA: using GART IOMMU.
[ 0.400700] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.401209] Scanning for low memory corruption every 60 seconds
[ 0.401306] audit: initializing netlink socket (disabled)
[ 0.401315] type=2000 audit(1272692139.400:1): initialized
[ 0.407454] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.408349] VFS: Disk quotas dquot_6.5.2
[ 0.408388] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.408814] fuse init (API version 7.13)
[ 0.408870] msgmni has been set to 14979
[ 0.409018] alg: No test for stdrng (krng)
[ 0.409053] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.409055] io scheduler noop registered
[ 0.409056] io scheduler anticipatory registered
[ 0.409058] io scheduler deadline registered
[ 0.409081] io scheduler cfq registered (default)
[ 0.409188] alloc irq_desc for 24 on node 0
[ 0.409189] alloc kstat_irqs on node 0
[ 0.409195] pcieport 0000:00:0e.0: irq 24 for MSI/MSI-X
[ 0.409199] pcieport 0000:00:0e.0: setting latency timer to 64
[ 0.409267] alloc irq_desc for 25 on node 0
[ 0.409268] alloc kstat_irqs on node 0
[ 0.409271] pcieport 0000:00:0f.0: irq 25 for MSI/MSI-X
[ 0.409274] pcieport 0000:00:0f.0: setting latency timer to 64
[ 0.409315] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.409330] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.409398] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.409401] ACPI: Power Button [PWRB]
[ 0.409442] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.409443] ACPI: Power Button [PWRF]
[ 0.409478] fan PNP0C0B:00: registered as cooling_device0
[ 0.409482] ACPI: Fan [FAN] (on)
[ 0.409779] processor LNXCPU:00: registered as cooling_device1
[ 0.409801] processor LNXCPU:01: registered as cooling_device2
[ 0.413862] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20090903/nspredef-1012)
[ 0.413868] ACPI: Expecting a [Reference] package element, found type 0
[ 0.413869] ACPI: Invalid passive threshold
[ 0.414167] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.414172] ACPI: Thermal Zone [THRM] (40 C)
[ 0.415088] Linux agpgart interface v0.103
[ 0.415109] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.415193] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.415403] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.416038] brd: module loaded
[ 0.416338] loop: module loaded
[ 0.416396] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.416543] pata_acpi 0000:00:04.0: setting latency timer to 64
[ 0.416838] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 0.416841] alloc irq_desc for 23 on node 0
[ 0.416843] alloc kstat_irqs on node 0
[ 0.416851] pata_acpi 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.416864] pata_acpi 0000:00:05.0: setting latency timer to 64
[ 0.416869] pata_acpi 0000:00:05.0: PCI INT A disabled
[ 0.417147] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 22
[ 0.417149] alloc irq_desc for 22 on node 0
[ 0.417150] alloc kstat_irqs on node 0
[ 0.417155] pata_acpi 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 22 (level, low) -> IRQ 22
[ 0.417171] pata_acpi 0000:00:05.2: setting latency timer to 64
[ 0.417176] pata_acpi 0000:00:05.2: PCI INT C disabled
[ 0.417207] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)
[ 0.417461] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[ 0.417462] alloc irq_desc for 16 on node 0
[ 0.417463] alloc kstat_irqs on node 0
[ 0.417469] pata_acpi 0000:02:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[ 0.417486] pata_acpi 0000:02:00.1: setting latency timer to 64
[ 0.417493] pata_acpi 0000:02:00.1: PCI INT B disabled
[ 0.417755] Fixed MDIO Bus: probed
[ 0.417776] PPP generic driver version 2.4.2
[ 0.417799] tun: Universal TUN/TAP device driver, 1.6
[ 0.417801] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.417861] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.418134] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 0.418136] alloc irq_desc for 21 on node 0
[ 0.418137] alloc kstat_irqs on node 0
[ 0.418142] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 0.418160] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.418162] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.418186] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.418206] ehci_hcd 0000:00:02.1: debug port 1
[ 0.418211] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.418228] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000
[ 0.430013] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.430072] usb usb1: configuration #1 chosen from 1 choice
[ 0.430090] hub 1-0:1.0: USB hub found
[ 0.430096] hub 1-0:1.0: 10 ports detected
[ 0.430140] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.430417] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 0.430419] alloc irq_desc for 20 on node 0
[ 0.430420] alloc kstat_irqs on node 0
[ 0.430426] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 0.430432] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.430434] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.430457] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.430475] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
[ 0.431782] Freeing initrd memory: 8131k freed
[ 0.492061] usb usb2: configuration #1 chosen from 1 choice
[ 0.492077] hub 2-0:1.0: USB hub found
[ 0.492083] hub 2-0:1.0: 10 ports detected
[ 0.492127] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.492174] PNP: No PS/2 controller found. Probing ports directly.
[ 0.492547] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.492551] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.492601] mice: PS/2 mouse device common for all mice
[ 0.492670] rtc_cmos 00:05: RTC can wake from S4
[ 0.492698] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.492729] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.492816] device-mapper: uevent: version 1.0.3
[ 0.492913] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.492981] device-mapper: multipath: version 1.1.0 loaded
[ 0.492983] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.493130] cpuidle: using governor ladder
[ 0.493131] cpuidle: using governor menu
[ 0.493375] TCP cubic registered
[ 0.493453] NET: Registered protocol family 10
[ 0.493768] lo: Disabled Privacy Extensions
[ 0.493978] NET: Registered protocol family 17
[ 0.494001] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ processors (2 cpu cores) (version 2.20.00)
[ 0.494007] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 0.494008] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 0.494068] PM: Resume from disk failed.
[ 0.494077] registered taskstats version 1
[ 0.494342] Magic number: 10:623:566
[ 0.494371] pci_link PNP0C0F:13: hash matches
[ 0.494415] rtc_cmos 00:05: setting system clock to 2010-05-01 05:35:40 UTC (1272692140)
[ 0.494418] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.494419] EDD information not available.
[ 0.494460] Freeing unused kernel memory: 876k freed
[ 0.494727] Write protecting the kernel read-only data: 7680k
[ 0.505987] udev: starting version 151
[ 0.564272] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.564565] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 0.564569] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 0.564573] forcedeth 0000:00:08.0: setting latency timer to 64
[ 0.564625] nv_probe: set workaround bit for reversed mac addr
[ 0.590415] pata_jmicron 0000:02:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[ 0.590445] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 0.593059] scsi0 : pata_jmicron
[ 0.593641] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 0.593645] alloc irq_desc for 19 on node 0
[ 0.593646] alloc kstat_irqs on node 0
[ 0.593654] ohci1394 0000:01:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 0.594024] scsi1 : pata_jmicron
[ 0.594052] ata1: PATA max UDMA/100 cmd 0x9c00 ctl 0x9800 bmdma 0x8c00 irq 16
[ 0.594054] ata2: PATA max UDMA/100 cmd 0x9400 ctl 0x9000 bmdma 0x8c08 irq 16
[ 0.594861] ahci 0000:02:00.0: version 3.0
[ 0.595093] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 0.595095] ahci 0000:02:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 0.610074] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.610077] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.610081] ahci 0000:02:00.0: setting latency timer to 64
[ 0.610210] scsi2 : ahci
[ 0.610277] scsi3 : ahci
[ 0.610307] ata3: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16
[ 0.610310] ata4: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16
[ 0.650046] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 0.960028] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.961281] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.090620] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1e:8c:6d:12:6e
[ 1.090623] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.090677] pata_amd 0000:00:04.0: version 0.4.1
[ 1.090703] pata_amd 0000:00:04.0: setting latency timer to 64
[ 1.090758] scsi4 : pata_amd
[ 1.090811] scsi5 : pata_amd
[ 1.091253] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.091255] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.091283] ata5: port disabled. ignoring.
[ 1.091303] ata6: port disabled. ignoring.
[ 1.091393] sata_nv 0000:00:05.0: version 3.5
[ 1.091400] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 1.091401] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 1.091755] sata_nv 0000:00:05.0: setting latency timer to 64
[ 1.091864] scsi6 : sata_nv
[ 1.091951] scsi7 : sata_nv
[ 1.092098] ata7: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23
[ 1.092100] ata8: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23
[ 1.092440] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 22
[ 1.092444] forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 22 (level, low) -> IRQ 22
[ 1.092446] forcedeth 0000:00:09.0: setting latency timer to 64
[ 1.092484] nv_probe: set workaround bit for reversed mac addr
[ 1.330012] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 1.569094] usb 2-1: configuration #1 chosen from 1 choice
[ 1.580042] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.620645] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1e:8c:6d:3d:73
[ 1.620647] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.620957] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
[ 1.620961] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21
[ 1.620963] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 1.621301] sata_nv 0000:00:05.1: setting latency timer to 64
[ 1.621409] scsi8 : sata_nv
[ 1.621474] scsi9 : sata_nv
[ 1.621623] ata9: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 21
[ 1.621625] ata10: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 21
[ 1.621697] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 22 (level, low) -> IRQ 22
[ 1.621699] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 1.622038] sata_nv 0000:00:05.2: setting latency timer to 64
[ 1.622162] scsi10 : sata_nv
[ 1.622225] scsi11 : sata_nv
[ 1.622448] ata11: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 22
[ 1.622450] ata12: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 22
[ 1.626233] ata7.00: ATA-7: WDC WD800JD-00LSA5, 10.01E01, max UDMA/133
[ 1.626235] ata7.00: 156301488 sectors, multi 1: LBA48
[ 1.640253] ata7.00: configured for UDMA/133
[ 1.640323] scsi 6:0:0:0: Direct-Access ATA WDC WD800JD-00LS 10.0 PQ: 0 ANSI: 5
[ 1.640431] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 1.640474] sd 6:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.640579] sd 6:0:0:0: [sda] Write Protect is off
[ 1.640582] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.640598] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.640802] sda: sda1 sda2
[ 1.642734] sd 6:0:0:0: [sda] Attached SCSI disk
[ 1.817412] kjournald starting. Commit interval 5 seconds
[ 1.817419] EXT3-fs: mounted filesystem with ordered data mode.
[ 1.910023] usb 2-2: new low speed USB device using ohci_hcd and address 3
[ 1.970138] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0000190551]
[ 2.110033] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.110106] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.130033] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.130318] ata11.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100
[ 2.131345] ata9.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 2.131347] ata9.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.141090] usb 2-2: configuration #1 chosen from 1 choice
[ 2.170290] ata11.00: configured for UDMA/100
[ 2.170470] ata8.00: ATA-8: SAMSUNG HD403LJ, CT100-10, max UDMA7
[ 2.170472] ata8.00: 781422768 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.170545] ata9.00: configured for UDMA/133
[ 2.190202] ata8.00: configured for UDMA/133
[ 2.190272] scsi 7:0:0:0: Direct-Access ATA SAMSUNG HD403LJ CT10 PQ: 0 ANSI: 5
[ 2.190381] sd 7:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.190389] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 2.190414] sd 7:0:0:0: [sdb] Write Protect is off
[ 2.190416] sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.190438] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.190457] scsi 8:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 2.190539] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 2.190546] sdb:
[ 2.190587] sd 8:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.190619] sd 8:0:0:0: [sdc] Write Protect is off
[ 2.190621] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.190636] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.190722] sdc: sdc1
[ 2.197670] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 2.198668] sdb1
[ 2.198783] sd 7:0:0:0: [sdb] Attached SCSI disk
[ 2.480016] usb 2-7: new full speed USB device using ohci_hcd and address 4
[ 2.680041] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.700513] ata10.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 2.700515] ata10.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.707096] usb 2-7: configuration #1 chosen from 1 choice
[ 2.740564] ata10.00: configured for UDMA/133
[ 2.740614] scsi 9:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 2.740709] sd 9:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.740712] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 2.740756] sd 9:0:0:0: [sdd] Write Protect is off
[ 2.740758] sd 9:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.740773] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.740870] sdd:
[ 2.741403] scsi 10:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203N SB01 PQ: 0 ANSI: 5
[ 2.744527] sdd1
[ 2.744663] sd 9:0:0:0: [sdd] Attached SCSI disk
[ 2.746215] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.746218] Uniform CD-ROM driver Revision: 3.20
[ 2.746263] sr 10:0:0:0: Attached scsi CD-ROM sr0
[ 2.746298] sr 10:0:0:0: Attached scsi generic sg4 type 5
[ 3.050018] usb 2-8: new low speed USB device using ohci_hcd and address 5
[ 3.080382] ata12: SATA link down (SStatus 0 SControl 300)
[ 3.276102] usb 2-8: configuration #1 chosen from 1 choice
[ 30.343134] udev: starting version 151
[ 30.345720] Adding 4000144k swap on /dev/sda1. Priority:-1 extents:1 across:4000144k
[ 30.421549] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 30.421553] ACPI: resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM00 [0x001c40-0x001c45]
[ 30.421555] ACPI: This conflict may cause random problems and system instability
[ 30.421556] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 30.421569] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[ 30.441386] lp: driver loaded but no devices found
[ 30.442295] EDAC MC: Ver: 2.1.0 Apr 16 2010
[ 30.448335] vga16fb: initializing
[ 30.448339] vga16fb: mapped to 0xffff8800000a0000
[ 30.448416] fb0: VGA16 VGA frame buffer device
[ 30.580118] nvidia: module license 'NVIDIA' taints kernel.
[ 30.580121] Disabling lock debugging due to kernel taint
[ 30.590779] type=1505 audit(1272692170.595:2): operation="profile_load" pid=722 name="/sbin/dhclient3"
[ 30.590958] type=1505 audit(1272692170.595:3): operation="profile_load" pid=722 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 30.591061] type=1505 audit(1272692170.595:4): operation="profile_load" pid=722 name="/usr/lib/connman/scripts/dhclient-script"
[ 30.687388] type=1505 audit(1272692170.685:5): operation="profile_load" pid=750 name="/usr/sbin/ntpd"
[ 30.846685] EXT3 FS on sda2, internal journal
[ 30.854669] EDAC amd64_edac: Ver: 3.2.0 Apr 16 2010
[ 30.918562] parport_pc 00:09: reported by Plug and Play ACPI
[ 30.918605] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 30.922033] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 30.923121] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 30.923128] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 30.923129] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 30.923130] (Note that use of the override may cause unknown side effects.)
[ 30.923141] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 30.926599] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 30.926604] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 30.926606] hda_intel: Disable MSI for Nvidia chipset
[ 30.926689] HDA Intel 0000:00:06.1: setting latency timer to 64
[ 30.930881] it87: Found IT8716F chip at 0x290, revision 1
[ 30.930890] it87: in3 is VCC (+5V)
[ 30.930891] it87: in7 is VCCH (+5V Stand-By)
[ 30.930927] ACPI: resource it87 [0x295-0x296] conflicts with ACPI region HWRE [0x295-0x296]
[ 30.930929] ACPI: This conflict may cause random problems and system instability
[ 30.930930] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 30.937368] Linux video capture interface: v2.00
[ 30.938809] gspca: main v2.7.0 registered
[ 30.939523] gspca: probing 041e:4034
[ 31.041904] usbcore: registered new interface driver hiddev
[ 31.049191] ppdev: user-space parallel port driver
[ 31.100186] lp0: using parport0 (interrupt-driven).
[ 31.101611] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 31.101615] nvidia 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
[ 31.101621] nvidia 0000:03:00.0: setting latency timer to 64
[ 31.101623] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:ow ns=io+mem
[ 31.101814] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3F11
[ 31.101833] usbcore: registered new interface driver usblp
[ 31.103325] input: Silitek Standard USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input3
[ 31.103392] generic-usb 0003:047B:0011.0001: input,hidraw0: USB HID v1.00 Keyboard [Silitek Standard USB Keyboard ] on usb-0000:00:02.0-2/input0
[ 31.104634] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.15 Fri Mar 12 00:29:13 PST 2010
[ 31.108291] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input4
[ 31.108369] generic-usb 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-8/input0
[ 31.108389] usbcore: registered new interface driver usbhid
[ 31.108391] usbhid: v2.6:USB HID core driver
[ 31.115562] Console: switching to colour frame buffer device 80x30
[ 31.359014] zc3xx: probe sif 0x0007
[ 31.371009] zc3xx: probe sensor -> 000f
[ 31.371010] zc3xx: Find Sensor PAS106
[ 31.383081] gspca: probe ok
[ 31.383101] usbcore: registered new interface driver zc3xx
[ 31.383103] zc3xx: registered
[ 32.729987] kjournald starting. Commit interval 5 seconds
[ 32.729992] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 32.730284] EXT3 FS on sdb1, internal journal
[ 32.730287] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.796500] type=1505 audit(1272692172.795:6): operation="profile_load" pid=1003 name="/usr/share/gdm/guest-session/Xsession"
[ 32.797656] type=1505 audit(1272692172.795:7): operation="profile_replace" pid=1004 name="/sbin/dhclient3"
[ 32.797844] type=1505 audit(1272692172.795:8): operation="profile_replace" pid=1004 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 32.797954] type=1505 audit(1272692172.795:9): operation="profile_replace" pid=1004 name="/usr/lib/connman/scripts/dhclient-script"
[ 32.800306] type=1505 audit(1272692172.805:10): operation="profile_load" pid=1005 name="/usr/bin/evince"
[ 32.802790] type=1505 audit(1272692172.805:11): operation="profile_load" pid=1005 name="/usr/bin/evince-previewer"
[ 32.835068] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:06.1/input/input5
[ 33.258702] alloc irq_desc for 26 on node 0
[ 33.258705] alloc kstat_irqs on node 0
[ 33.258712] forcedeth 0000:00:08.0: irq 26 for MSI/MSI-X
[ 33.263338] alloc irq_desc for 27 on node 0
[ 33.263341] alloc kstat_irqs on node 0
[ 33.263348] forcedeth 0000:00:09.0: irq 27 for MSI/MSI-X
[ 33.263531] eth1: no link during initialization.
[ 33.264602] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 33.271622] kvm: Nested Virtualization enabled
[ 35.370074] device eth0 entered promiscuous mode
[ 35.876026] CPU0 attaching NULL sched-domain.
[ 35.876031] CPU1 attaching NULL sched-domain.
[ 35.941348] CPU0 attaching sched-domain:
[ 35.941351] domain 0: span 0-1 level MC
[ 35.941353] groups: 0 1
[ 35.941357] CPU1 attaching sched-domain:
[ 35.941359] domain 0: span 0-1 level MC
[ 35.941360] groups: 1 0
[ 36.131299] device eth0 left promiscuous mode
I am aware of the bug listed at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/440780. I am unsure that this is causing my RAID issue.
I get the feeling I am missing a kernel module or something for the JMicron controller. I'd like some direction so I can get this resolved.
Thank you.
I am having some issues with an upgrade I performed.
I was running a hardware RAID 1 mirroring on two 1 TB drives on my ASUS M2N motherboard in version 9.10. All was working fine.
I upgraded to 10.04 today, and suddenly the RAIDed device that was presented to the operating system is no longer available, but I do see both devices listed as mountable, and all of my data is on them. They both have the same uuid.
I noticed on boot after grub does its thing, I see an error on the screen for less than a second:
nForce2_smbus 0000:00:01.1: Error probing SMB2
I see the following in /var/log/dmesg:
[ 33.866002] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 33.866006] ACPI: resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM00 [0x001c40-0x001c45]
[ 33.866008] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 33.866011] nForce2_smbus 0000:00:01.1: Error probing SMB2.
I am wondering if these are related somehow, but am unsure where to start looking.
I did verify that RAID is still configured in my BIOS, and it seems to be working just as it was before the upgrade. For some reason, Ubuntu is not seeing the RAIDed device presented to it by the hardware, and is instead seeing the devices individually.
Here is some output of lspci:
00:00.0 RAM memory [0500]: nVidia Corporation MCP55 Memory Controller [10de:0369] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn+ ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [dc] HyperTransport: MSI Mapping Enable+ Fixed-
Mapping Address Base: 00000000fee00000
00:01.0 ISA bridge [0601]: nVidia Corporation MCP55 LPC Bridge [10de:0360] (rev a3)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation MCP55 SMBus [10de:0368] (rev a3)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 255
Region 0: I/O ports at fc00 [size=64]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at 1c40 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: nForce2_smbus
Kernel modules: i2c-nforce2
00:02.0 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036c] (rev a1) (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ohci_hcd
00:02.1 USB Controller [0c03]: nVidia Corporation MCP55 USB Controller [10de:036d] (rev a2) (prog-if 20)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port: BAR=1 offset=0098
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ehci_hcd
00:04.0 IDE interface [0101]: nVidia Corporation MCP55 IDE [10de:036e] (rev a1) (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_amd
Kernel modules: pata_amd
00:05.0 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at dc00 [size=16]
Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
Kernel modules: sata_nv
00:05.1 RAID bus controller [0104]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 21
Region 0: I/O ports at 09e0 [size=8]
Region 1: I/O ports at 0be0 [size=4]
Region 2: I/O ports at 0960 [size=8]
Region 3: I/O ports at 0b60 [size=4]
Region 4: I/O ports at c800 [size=16]
Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
Kernel modules: sata_nv
00:05.2 IDE interface [0101]: nVidia Corporation MCP55 SATA Controller [10de:037f] (rev a3) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin C routed to IRQ 22
Region 0: I/O ports at c400 [size=8]
Region 1: I/O ports at c000 [size=4]
Region 2: I/O ports at bc00 [size=8]
Region 3: I/O ports at b800 [size=4]
Region 4: I/O ports at b400 [size=16]
Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: sata_nv
Kernel modules: sata_nv
00:06.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI bridge [10de:0370] (rev a2) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fde00000-fdefffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn+
Capabilities: [b8] Subsystem: nVidia Corporation Device [10de:cb84]
Capabilities: [8c] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
00:06.1 Audio device [0403]: nVidia Corporation MCP55 High Definition Audio [10de:0371] (rev a2)
Subsystem: ASUSTeK Computer Inc. Device [1043:81f6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:08.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 26
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at b000 [size=8]
Region 2: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fe028000 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
Vector table: BAR=2 offset=00000000
PBA: BAR=3 offset=00000000
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
Address: 00000000fee0100c Data: 4189
Masking: 000000fe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:09.0 Bridge [0680]: nVidia Corporation MCP55 Ethernet [10de:0373] (rev a3)
Subsystem: ASUSTeK Computer Inc. Device [1043:8239]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 27
Region 0: Memory at fe027000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at ac00 [size=8]
Region 2: Memory at fe026000 (32-bit, non-prefetchable) [size=256]
Region 3: Memory at fe025000 (32-bit, non-prefetchable) [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
Vector table: BAR=2 offset=00000000
PBA: BAR=3 offset=00000000
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
Address: 00000000fee0300c Data: 4191
Masking: 000000fe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth
00:0e.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0375] (rev a3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00008000-00009fff
Memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4149
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:0f.0 PCI bridge [0604]: nVidia Corporation MCP55 PCI Express bridge [10de:0377] (rev a3)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: nVidia Corporation Device [10de:0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
Address: 00000000fee0300c Data: 4151
Capabilities: [60] HyperTransport: MSI Mapping Enable- Fixed-
Mapping Address Base: 00000000fee00000
Capabilities: [80] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 0, PowerLimit 0.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
Changed: MRL- PresDet+ LinkState+
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel <?>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel modules: amd64_edac_mod
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [f0] Secure device <?>
Kernel driver in use: k8temp
Kernel modules: k8temp
01:0b.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023] (prog-if 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:808b]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fdef8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
Kernel driver in use: ohci1394
Kernel modules: firewire-ohci, ohci1394
02:00.0 SATA controller [0106]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 01)
Subsystem: ASUSTeK Computer Inc. Device [1043:81e4]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 5: Memory at fddfe000 (32-bit, non-prefetchable) [size=8K]
Expansion ROM at fdde0000 [disabled] [size=64K]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Express (v1) Legacy Endpoint, MSI 01
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr+ UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s, Latency L0 <1us, L1 <16us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Kernel driver in use: ahci
Kernel modules: ahci
02:00.1 IDE interface [0101]: JMicron Technology Corp. JMB362/JMB363 Serial ATA Controller [197b:2363] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: ASUSTeK Computer Inc. Device [1043:81e4]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 16
Region 0: I/O ports at 9c00 [size=8]
Region 1: I/O ports at 9800 [size=4]
Region 2: I/O ports at 9400 [size=8]
Region 3: I/O ports at 9000 [size=4]
Region 4: I/O ports at 8c00 [size=16]
Capabilities: [68] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pata_jmicron
Kernel modules: pata_jmicron
03:00.0 VGA compatible controller [0300]: nVidia Corporation G86 [GeForce 8500 GT] [10de:0421] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8256]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f8000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at 7c00 [size=128]
[virtual] Expansion ROM at fbfe0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel <?>
Capabilities: [128] Power Budgeting <?>
Capabilities: [600] Vendor Specific Information <?>
Kernel driver in use: nvidia
Kernel modules: nvidia-current, nvidiafb, nouveau
Here is /var/log/dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@yellow) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:09:38 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] Command line: root=UUID=2be8c467-bb5e-40b9-96cc-b11a4d1d517f ro quiet splash acpi_enforce_resources=lax
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009c400 (usable)
[ 0.000000] BIOS-e820: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bfee0000 (usable)
[ 0.000000] BIOS-e820: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef0000 - 00000000bff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working around it.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0x220000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask FF80000000 write-back
[ 0.000000] 1 base 0080000000 mask FFC0000000 write-back
[ 0.000000] 2 base 00BFF00000 mask FFFFF00000 uncachable
[ 0.000000] 3 base 0100000000 mask FF00000000 write-back
[ 0.000000] 4 base 0200000000 mask FFE0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000220000000 aka 8704M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xbfee0 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 0 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009c400 (usable)
[ 0.000000] modified: 000000000009c400 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 00000000bfee0000 (usable)
[ 0.000000] modified: 00000000bfee0000 - 00000000bfee3000 (ACPI NVS)
[ 0.000000] modified: 00000000bfee3000 - 00000000bfef0000 (ACPI data)
[ 0.000000] modified: 00000000bfef0000 - 00000000bff00000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000220000000 (usable)
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bfee0000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0000000000 - 00bfe00000 page 2M
[ 0.000000] 00bfe00000 - 00bfee0000 page 4k
[ 0.000000] kernel direct mapping tables up to bfee0000 @ 10000-15000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000220000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] 0100000000 - 0220000000 page 2M
[ 0.000000] kernel direct mapping tables up to 220000000 @ 13000-1d000
[ 0.000000] RAMDISK: 377ff000 - 37feff2a
[ 0.000000] ACPI: RSDP 00000000000f7c80 00024 (v02 Nvidia)
[ 0.000000] ACPI: XSDT 00000000bfee3100 00044 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: FACP 00000000bfeead40 000F4 (v03 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: DSDT 00000000bfee3280 07A51 (v01 NVIDIA AWRDACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000bfee0000 00040
[ 0.000000] ACPI: HPET 00000000bfeeaf80 00038 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000098)
[ 0.000000] ACPI: MCFG 00000000bfeeb000 0003C (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: APIC 00000000bfeeae80 00098 (v01 Nvidia ASUSACPI 42302E31 AWRD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000220000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000220000000
[ 0.000000] NODE_DATA [0000000000018000 - 000000000001cfff]
[ 0.000000] bootmap [000000000001d000 - 0000000000060fff] pages 44
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0220000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 0001a29e64] TEXT DATA BSS ==> [0001000000 - 0001a29e64]
[ 0.000000] #3 [00377ff000 - 0037feff2a] RAMDISK ==> [00377ff000 - 0037feff2a]
[ 0.000000] #4 [000009c400 - 0000100000] BIOS reserved ==> [000009c400 - 0000100000]
[ 0.000000] #5 [0001a2a000 - 0001a2a155] BRK ==> [0001a2a000 - 0001a2a155]
[ 0.000000] #6 [0000010000 - 0000013000] PGTABLE ==> [0000010000 - 0000013000]
[ 0.000000] #7 [0000013000 - 0000018000] PGTABLE ==> [0000013000 - 0000018000]
[ 0.000000] found SMP MP-table at [ffff8800000f5bd0] f5bd0
[ 0.000000] [ffffea0000000000-ffffea00077fffff] PMD -> [ffff880028600000-ffff88002effffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00220000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009c
[ 0.000000] 0: 0x00000100 -> 0x000bfee0
[ 0.000000] 0: 0x00100000 -> 0x00220000
[ 0.000000] On node 0 totalpages: 1965676
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 110 pages reserved
[ 0.000000] DMA zone: 3814 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 767768 pages, LIFO batch:31
[ 0.000000] Normal zone: 16128 pages used for memmap
[ 0.000000] Normal zone: 1163520 pages, LIFO batch:31
[ 0.000000] Detected use of extended apic ids on hypertransport bus
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009c000 - 000000000009d000
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bfee0000 - 00000000bfee3000
[ 0.000000] PM: Registered nosave memory: 00000000bfee3000 - 00000000bfef0000
[ 0.000000] PM: Registered nosave memory: 00000000bfef0000 - 00000000bff00000
[ 0.000000] PM: Registered nosave memory: 00000000bff00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bff00000 (gap: bff00000:30100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880028200000 s91544 r8192 d23144 u524288
[ 0.000000] pcpu-alloc: s91544 r8192 d23144 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1935102
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: root=UUID=2be8c467-bb5e-40b9-96cc-b11a4d1d517f ro quiet splash acpi_enforce_resources=lax
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ ed98000000 size 32 MB
[ 0.000000] Aperture beyond 4GB. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 7669264k/8912896k available (5409k kernel code, 1050192k absent, 193440k reserved, 2976k data, 876k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:440
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 78643200 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3214.991 MHz processor.
[ 0.010004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6429.98 BogoMIPS (lpj=32149910)
[ 0.010023] Security Framework initialized
[ 0.010037] AppArmor: AppArmor initialized
[ 0.010514] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.013923] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.015544] Mount-cache hash table entries: 256
[ 0.015650] Initializing cgroup subsys ns
[ 0.015653] Initializing cgroup subsys cpuacct
[ 0.015656] Initializing cgroup subsys memory
[ 0.015662] Initializing cgroup subsys devices
[ 0.015664] Initializing cgroup subsys freezer
[ 0.015665] Initializing cgroup subsys net_cls
[ 0.015680] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.015681] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.015683] CPU 0/0x0 -> Node 0
[ 0.015684] tseg: 00bff00000
[ 0.015685] CPU: Physical Processor ID: 0
[ 0.015687] CPU: Processor Core ID: 0
[ 0.015689] mce: CPU supports 5 MCE banks
[ 0.015696] using C1E aware idle routine
[ 0.015697] Performance Events: AMD PMU driver.
[ 0.015701] ... version: 0
[ 0.015702] ... bit width: 48
[ 0.015703] ... generic registers: 4
[ 0.015704] ... value mask: 0000ffffffffffff
[ 0.015705] ... max period: 00007fffffffffff
[ 0.015706] ... fixed-purpose events: 0
[ 0.015707] ... event mask: 000000000000000f
[ 0.016837] ACPI: Core revision 20090903
[ 0.027106] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.027114] ftrace: allocating 22518 entries in 89 pages
[ 0.030066] Setting APIC routing to flat
[ 0.030492] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.131493] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ stepping 03
[ 0.140000] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.020000] Initializing CPU#1
[ 0.020000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.020000] CPU: L2 Cache: 1024K (64 bytes/line)
[ 0.020000] CPU 1/0x1 -> Node 0
[ 0.020000] CPU: Physical Processor ID: 0
[ 0.020000] CPU: Processor Core ID: 1
[ 0.290033] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ stepping 03
[ 0.290046] Brought up 2 CPUs
[ 0.290048] Total of 2 processors activated (12859.59 BogoMIPS).
[ 0.290219] CPU0 attaching sched-domain:
[ 0.290221] domain 0: span 0-1 level MC
[ 0.290222] groups: 0 1
[ 0.290226] CPU1 attaching sched-domain:
[ 0.290227] domain 0: span 0-1 level MC
[ 0.290229] groups: 1 0
[ 0.290285] devtmpfs: initialized
[ 0.290285] regulator: core version 0.5
[ 0.290285] Time: 5:35:39 Date: 05/01/10
[ 0.290285] NET: Registered protocol family 16
[ 0.290285] node 0 link 0: io port [7000, ffff]
[ 0.290285] TOM: 00000000c0000000 aka 3072M
[ 0.290285] node 0 link 0: mmio [a0000, bffff]
[ 0.290285] Trying to unpack rootfs image as initramfs...
[ 0.290285] node 0 link 0: mmio [c0000000, efffffff]
[ 0.290285] node 0 link 0: mmio [f4000000, fe02ffff]
[ 0.290285] node 0 link 0: mmio [f0000000, f03fffff]
[ 0.290285] TOM2: 0000000220000000 aka 8704M
[ 0.290285] bus: [00,03] on node 0 link 0
[ 0.290285] bus: 00 index 0 io port: [0, ffff]
[ 0.290285] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.290285] bus: 00 index 2 mmio: [c0000000, f3ffffff]
[ 0.290285] bus: 00 index 3 mmio: [f4000000, ffffffff]
[ 0.290285] bus: 00 index 4 mmio: [220000000, fcffffffff]
[ 0.290285] ACPI: bus type pci registered
[ 0.290285] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.290285] PCI: MCFG area at f0000000 reserved in E820
[ 0.291934] PCI: Using MMCONFIG at f0000000 - f3ffffff
[ 0.291935] PCI: Using configuration type 1 for base access
[ 0.300075] bio: create slab <bio-0> at 0
[ 0.300714] ACPI: EC: Look up EC in DSDT
[ 0.308102] ACPI: Interpreter enabled
[ 0.308108] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.308130] ACPI: Using IOAPIC for interrupt routing
[ 0.315753] ACPI: No dock devices found.
[ 0.315842] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.316038] pci 0000:00:01.1: reg 10 io port: [0xfc00-0xfc3f]
[ 0.316048] pci 0000:00:01.1: reg 20 io port: [0x1c00-0x1c3f]
[ 0.316051] pci 0000:00:01.1: reg 24 io port: [0x1c40-0x1c7f]
[ 0.316069] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 0.316073] pci 0000:00:01.1: PME# disabled
[ 0.316094] pci 0000:00:02.0: reg 10 32bit mmio: [0xfe02f000-0xfe02ffff]
[ 0.316110] pci 0000:00:02.0: supports D1 D2
[ 0.316111] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316113] pci 0000:00:02.0: PME# disabled
[ 0.316128] pci 0000:00:02.1: reg 10 32bit mmio: [0xfe02e000-0xfe02e0ff]
[ 0.316144] pci 0000:00:02.1: supports D1 D2
[ 0.316145] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316147] pci 0000:00:02.1: PME# disabled
[ 0.316168] pci 0000:00:04.0: reg 20 io port: [0xf000-0xf00f]
[ 0.316189] pci 0000:00:05.0: reg 10 io port: [0x9f0-0x9f7]
[ 0.316192] pci 0000:00:05.0: reg 14 io port: [0xbf0-0xbf3]
[ 0.316194] pci 0000:00:05.0: reg 18 io port: [0x970-0x977]
[ 0.316197] pci 0000:00:05.0: reg 1c io port: [0xb70-0xb73]
[ 0.316200] pci 0000:00:05.0: reg 20 io port: [0xdc00-0xdc0f]
[ 0.316203] pci 0000:00:05.0: reg 24 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.316226] pci 0000:00:05.1: reg 10 io port: [0x9e0-0x9e7]
[ 0.316229] pci 0000:00:05.1: reg 14 io port: [0xbe0-0xbe3]
[ 0.316232] pci 0000:00:05.1: reg 18 io port: [0x960-0x967]
[ 0.316234] pci 0000:00:05.1: reg 1c io port: [0xb60-0xb63]
[ 0.316237] pci 0000:00:05.1: reg 20 io port: [0xc800-0xc80f]
[ 0.316240] pci 0000:00:05.1: reg 24 32bit mmio: [0xfe02c000-0xfe02cfff]
[ 0.316263] pci 0000:00:05.2: reg 10 io port: [0xc400-0xc407]
[ 0.316265] pci 0000:00:05.2: reg 14 io port: [0xc000-0xc003]
[ 0.316268] pci 0000:00:05.2: reg 18 io port: [0xbc00-0xbc07]
[ 0.316271] pci 0000:00:05.2: reg 1c io port: [0xb800-0xb803]
[ 0.316274] pci 0000:00:05.2: reg 20 io port: [0xb400-0xb40f]
[ 0.316276] pci 0000:00:05.2: reg 24 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.316324] pci 0000:00:06.1: reg 10 32bit mmio: [0xfe020000-0xfe023fff]
[ 0.316342] pci 0000:00:06.1: PME# supported from D3hot D3cold
[ 0.316345] pci 0000:00:06.1: PME# disabled
[ 0.316372] pci 0000:00:08.0: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
[ 0.316375] pci 0000:00:08.0: reg 14 io port: [0xb000-0xb007]
[ 0.316378] pci 0000:00:08.0: reg 18 32bit mmio: [0xfe029000-0xfe0290ff]
[ 0.316380] pci 0000:00:08.0: reg 1c 32bit mmio: [0xfe028000-0xfe02800f]
[ 0.316397] pci 0000:00:08.0: supports D1 D2
[ 0.316398] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316401] pci 0000:00:08.0: PME# disabled
[ 0.316425] pci 0000:00:09.0: reg 10 32bit mmio: [0xfe027000-0xfe027fff]
[ 0.316428] pci 0000:00:09.0: reg 14 io port: [0xac00-0xac07]
[ 0.316430] pci 0000:00:09.0: reg 18 32bit mmio: [0xfe026000-0xfe0260ff]
[ 0.316433] pci 0000:00:09.0: reg 1c 32bit mmio: [0xfe025000-0xfe02500f]
[ 0.316450] pci 0000:00:09.0: supports D1 D2
[ 0.316451] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316454] pci 0000:00:09.0: PME# disabled
[ 0.316484] pci 0000:00:0e.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316486] pci 0000:00:0e.0: PME# disabled
[ 0.316511] pci 0000:00:0f.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.316513] pci 0000:00:0f.0: PME# disabled
[ 0.316595] pci 0000:01:0b.0: reg 10 32bit mmio: [0xfdeff000-0xfdeff7ff]
[ 0.316599] pci 0000:01:0b.0: reg 14 32bit mmio: [0xfdef8000-0xfdefbfff]
[ 0.316622] pci 0000:01:0b.0: supports D1 D2
[ 0.316623] pci 0000:01:0b.0: PME# supported from D0 D1 D2 D3hot
[ 0.316625] pci 0000:01:0b.0: PME# disabled
[ 0.316643] pci 0000:00:06.0: transparent bridge
[ 0.316646] pci 0000:00:06.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.316702] pci 0000:02:00.0: reg 24 32bit mmio: [0xfddfe000-0xfddfffff]
[ 0.316708] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfdde0000-0xfddeffff]
[ 0.316728] pci 0000:02:00.0: PME# supported from D3hot
[ 0.316732] pci 0000:02:00.0: PME# disabled
[ 0.316766] pci 0000:02:00.1: reg 10 io port: [0x9c00-0x9c07]
[ 0.316772] pci 0000:02:00.1: reg 14 io port: [0x9800-0x9803]
[ 0.316778] pci 0000:02:00.1: reg 18 io port: [0x9400-0x9407]
[ 0.316783] pci 0000:02:00.1: reg 1c io port: [0x9000-0x9003]
[ 0.316789] pci 0000:02:00.1: reg 20 io port: [0x8c00-0x8c0f]
[ 0.316850] pci 0000:00:0e.0: bridge io port: [0x8000-0x9fff]
[ 0.316852] pci 0000:00:0e.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.316873] pci 0000:03:00.0: reg 10 32bit mmio: [0xfa000000-0xfaffffff]
[ 0.316879] pci 0000:03:00.0: reg 14 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.316885] pci 0000:03:00.0: reg 1c 64bit mmio: [0xf8000000-0xf9ffffff]
[ 0.316889] pci 0000:03:00.0: reg 24 io port: [0x7c00-0x7c7f]
[ 0.316893] pci 0000:03:00.0: reg 30 32bit mmio pref: [0xfbfe0000-0xfbffffff]
[ 0.316937] pci 0000:00:0f.0: bridge io port: [0x7000-0x7fff]
[ 0.316939] pci 0000:00:0f.0: bridge 32bit mmio: [0xf8000000-0xfbffffff]
[ 0.316942] pci 0000:00:0f.0: bridge 64bit mmio pref: [0xe0000000-0xefffffff]
[ 0.316950] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.317174] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.359095] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.359231] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.359365] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.359499] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.359634] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.359770] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 *10 11 14 15)
[ 0.359905] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
[ 0.360058] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.360192] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.360326] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.360461] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 0.360595] ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 *10 11 14 15)
[ 0.360730] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[ 0.360864] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.360998] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.361132] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.361266] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.361402] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[ 0.361537] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[ 0.361673] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[ 0.361842] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 0.362006] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
[ 0.362169] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.362332] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 0.362495] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 0.362658] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 0.362821] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
[ 0.362984] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.363149] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
[ 0.363316] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.363479] ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
[ 0.363642] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.363805] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.363968] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
[ 0.364131] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
[ 0.364294] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.364457] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.364620] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.364783] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.364947] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[ 0.365043] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.365044] vgaarb: loaded
[ 0.365116] SCSI subsystem initialized
[ 0.365183] libata version 3.00 loaded.
[ 0.365228] usbcore: registered new interface driver usbfs
[ 0.365236] usbcore: registered new interface driver hub
[ 0.365253] usbcore: registered new device driver usb
[ 0.365349] ACPI: WMI: Mapper loaded
[ 0.365350] PCI: Using ACPI for IRQ routing
[ 0.365463] NetLabel: Initializing
[ 0.365464] NetLabel: domain hash size = 128
[ 0.365465] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.365475] NetLabel: unlabeled traffic allowed by default
[ 0.365501] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[ 0.365504] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 0.370035] Switching to clocksource hpet
[ 0.371192] AppArmor: AppArmor Filesystem Enabled
[ 0.371206] pnp: PnP ACPI init
[ 0.371219] ACPI: bus type pnp registered
[ 0.375247] pnp: PnP ACPI: found 12 devices
[ 0.375248] ACPI: ACPI bus type pnp unregistered
[ 0.375259] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.375261] system 00:01: ioport range 0x1080-0x10ff has been reserved
[ 0.375263] system 00:01: ioport range 0x1400-0x147f has been reserved
[ 0.375265] system 00:01: ioport range 0x1480-0x14ff has been reserved
[ 0.375267] system 00:01: ioport range 0x1800-0x187f has been reserved
[ 0.375269] system 00:01: ioport range 0x1880-0x18ff has been reserved
[ 0.375273] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.375274] system 00:02: ioport range 0x800-0x801 has been reserved
[ 0.375276] system 00:02: ioport range 0x290-0x297 has been reserved
[ 0.375281] system 00:0a: iomem range 0xf0000000-0xf3ffffff has been reserved
[ 0.375285] system 00:0b: iomem range 0xda800-0xdbfff has been reserved
[ 0.375287] system 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
[ 0.375289] system 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.375291] system 00:0b: iomem range 0xfc000-0xfffff could not be reserved
[ 0.375293] system 00:0b: iomem range 0xfefff000-0xfefff0ff has been reserved
[ 0.375295] system 00:0b: iomem range 0xbfee0000-0xbfefffff could not be reserved
[ 0.375297] system 00:0b: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.375299] system 00:0b: iomem range 0x0-0x9ffff could not be reserved
[ 0.375301] system 00:0b: iomem range 0x100000-0xbfedffff could not be reserved
[ 0.375303] system 00:0b: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.375305] system 00:0b: iomem range 0xfee00000-0xfeefffff has been reserved
[ 0.375307] system 00:0b: iomem range 0xfefff000-0xfeffffff could not be reserved
[ 0.375310] system 00:0b: iomem range 0xfff80000-0xfff80fff has been reserved
[ 0.375312] system 00:0b: iomem range 0xfff90000-0xfffbffff has been reserved
[ 0.375314] system 00:0b: iomem range 0xfffed000-0xfffeffff has been reserved
[ 0.379988] pci 0000:00:06.0: PCI bridge, secondary bus 0000:01
[ 0.379990] pci 0000:00:06.0: IO window: disabled
[ 0.379992] pci 0000:00:06.0: MEM window: 0xfde00000-0xfdefffff
[ 0.379994] pci 0000:00:06.0: PREFETCH window: disabled
[ 0.379997] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:02
[ 0.379999] pci 0000:00:0e.0: IO window: 0x8000-0x9fff
[ 0.380007] pci 0000:00:0e.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.380009] pci 0000:00:0e.0: PREFETCH window: disabled
[ 0.380011] pci 0000:00:0f.0: PCI bridge, secondary bus 0000:03
[ 0.380013] pci 0000:00:0f.0: IO window: 0x7000-0x7fff
[ 0.380015] pci 0000:00:0f.0: MEM window: 0xf8000000-0xfbffffff
[ 0.380018] pci 0000:00:0f.0: PREFETCH window: 0x000000e0000000-0x000000efffffff
[ 0.380024] pci 0000:00:06.0: setting latency timer to 64
[ 0.380028] pci 0000:00:0e.0: setting latency timer to 64
[ 0.380031] pci 0000:00:0f.0: setting latency timer to 64
[ 0.380034] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.380036] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.380038] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.380039] pci_bus 0000:01: resource 3 io: [0x00-0xffff]
[ 0.380041] pci_bus 0000:01: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.380043] pci_bus 0000:02: resource 0 io: [0x8000-0x9fff]
[ 0.380044] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.380046] pci_bus 0000:03: resource 0 io: [0x7000-0x7fff]
[ 0.380048] pci_bus 0000:03: resource 1 mem: [0xf8000000-0xfbffffff]
[ 0.380049] pci_bus 0000:03: resource 2 pref mem [0xe0000000-0xefffffff]
[ 0.380078] NET: Registered protocol family 2
[ 0.380273] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.381965] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.385278] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.385609] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.385611] TCP reno registered
[ 0.385689] NET: Registered protocol family 1
[ 0.400099] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400144] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400186] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400229] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400273] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400324] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400380] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400439] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400500] pci 0000:00:00.0: Found enabled HT MSI Mapping
[ 0.400517] pci 0000:03:00.0: Boot video device
[ 0.400640] PCI-DMA: Disabling AGP.
[ 0.400696] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.400697] PCI-DMA: using GART IOMMU.
[ 0.400700] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.401209] Scanning for low memory corruption every 60 seconds
[ 0.401306] audit: initializing netlink socket (disabled)
[ 0.401315] type=2000 audit(1272692139.400:1): initialized
[ 0.407454] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.408349] VFS: Disk quotas dquot_6.5.2
[ 0.408388] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.408814] fuse init (API version 7.13)
[ 0.408870] msgmni has been set to 14979
[ 0.409018] alg: No test for stdrng (krng)
[ 0.409053] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.409055] io scheduler noop registered
[ 0.409056] io scheduler anticipatory registered
[ 0.409058] io scheduler deadline registered
[ 0.409081] io scheduler cfq registered (default)
[ 0.409188] alloc irq_desc for 24 on node 0
[ 0.409189] alloc kstat_irqs on node 0
[ 0.409195] pcieport 0000:00:0e.0: irq 24 for MSI/MSI-X
[ 0.409199] pcieport 0000:00:0e.0: setting latency timer to 64
[ 0.409267] alloc irq_desc for 25 on node 0
[ 0.409268] alloc kstat_irqs on node 0
[ 0.409271] pcieport 0000:00:0f.0: irq 25 for MSI/MSI-X
[ 0.409274] pcieport 0000:00:0f.0: setting latency timer to 64
[ 0.409315] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.409330] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.409398] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.409401] ACPI: Power Button [PWRB]
[ 0.409442] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.409443] ACPI: Power Button [PWRF]
[ 0.409478] fan PNP0C0B:00: registered as cooling_device0
[ 0.409482] ACPI: Fan [FAN] (on)
[ 0.409779] processor LNXCPU:00: registered as cooling_device1
[ 0.409801] processor LNXCPU:01: registered as cooling_device2
[ 0.413862] ACPI Warning for \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20090903/nspredef-1012)
[ 0.413868] ACPI: Expecting a [Reference] package element, found type 0
[ 0.413869] ACPI: Invalid passive threshold
[ 0.414167] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.414172] ACPI: Thermal Zone [THRM] (40 C)
[ 0.415088] Linux agpgart interface v0.103
[ 0.415109] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.415193] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.415403] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.416038] brd: module loaded
[ 0.416338] loop: module loaded
[ 0.416396] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[ 0.416543] pata_acpi 0000:00:04.0: setting latency timer to 64
[ 0.416838] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[ 0.416841] alloc irq_desc for 23 on node 0
[ 0.416843] alloc kstat_irqs on node 0
[ 0.416851] pata_acpi 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 0.416864] pata_acpi 0000:00:05.0: setting latency timer to 64
[ 0.416869] pata_acpi 0000:00:05.0: PCI INT A disabled
[ 0.417147] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 22
[ 0.417149] alloc irq_desc for 22 on node 0
[ 0.417150] alloc kstat_irqs on node 0
[ 0.417155] pata_acpi 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 22 (level, low) -> IRQ 22
[ 0.417171] pata_acpi 0000:00:05.2: setting latency timer to 64
[ 0.417176] pata_acpi 0000:00:05.2: PCI INT C disabled
[ 0.417207] pata_acpi 0000:02:00.1: enabling device (0000 -> 0001)
[ 0.417461] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[ 0.417462] alloc irq_desc for 16 on node 0
[ 0.417463] alloc kstat_irqs on node 0
[ 0.417469] pata_acpi 0000:02:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[ 0.417486] pata_acpi 0000:02:00.1: setting latency timer to 64
[ 0.417493] pata_acpi 0000:02:00.1: PCI INT B disabled
[ 0.417755] Fixed MDIO Bus: probed
[ 0.417776] PPP generic driver version 2.4.2
[ 0.417799] tun: Universal TUN/TAP device driver, 1.6
[ 0.417801] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.417861] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.418134] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 0.418136] alloc irq_desc for 21 on node 0
[ 0.418137] alloc kstat_irqs on node 0
[ 0.418142] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 0.418160] ehci_hcd 0000:00:02.1: setting latency timer to 64
[ 0.418162] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 0.418186] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[ 0.418206] ehci_hcd 0000:00:02.1: debug port 1
[ 0.418211] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[ 0.418228] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfe02e000
[ 0.430013] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 0.430072] usb usb1: configuration #1 chosen from 1 choice
[ 0.430090] hub 1-0:1.0: USB hub found
[ 0.430096] hub 1-0:1.0: 10 ports detected
[ 0.430140] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.430417] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[ 0.430419] alloc irq_desc for 20 on node 0
[ 0.430420] alloc kstat_irqs on node 0
[ 0.430426] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[ 0.430432] ohci_hcd 0000:00:02.0: setting latency timer to 64
[ 0.430434] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 0.430457] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[ 0.430475] ohci_hcd 0000:00:02.0: irq 20, io mem 0xfe02f000
[ 0.431782] Freeing initrd memory: 8131k freed
[ 0.492061] usb usb2: configuration #1 chosen from 1 choice
[ 0.492077] hub 2-0:1.0: USB hub found
[ 0.492083] hub 2-0:1.0: 10 ports detected
[ 0.492127] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.492174] PNP: No PS/2 controller found. Probing ports directly.
[ 0.492547] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.492551] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.492601] mice: PS/2 mouse device common for all mice
[ 0.492670] rtc_cmos 00:05: RTC can wake from S4
[ 0.492698] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.492729] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.492816] device-mapper: uevent: version 1.0.3
[ 0.492913] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.492981] device-mapper: multipath: version 1.1.0 loaded
[ 0.492983] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.493130] cpuidle: using governor ladder
[ 0.493131] cpuidle: using governor menu
[ 0.493375] TCP cubic registered
[ 0.493453] NET: Registered protocol family 10
[ 0.493768] lo: Disabled Privacy Extensions
[ 0.493978] NET: Registered protocol family 17
[ 0.494001] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6400+ processors (2 cpu cores) (version 2.20.00)
[ 0.494007] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[ 0.494008] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[ 0.494068] PM: Resume from disk failed.
[ 0.494077] registered taskstats version 1
[ 0.494342] Magic number: 10:623:566
[ 0.494371] pci_link PNP0C0F:13: hash matches
[ 0.494415] rtc_cmos 00:05: setting system clock to 2010-05-01 05:35:40 UTC (1272692140)
[ 0.494418] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.494419] EDD information not available.
[ 0.494460] Freeing unused kernel memory: 876k freed
[ 0.494727] Write protecting the kernel read-only data: 7680k
[ 0.505987] udev: starting version 151
[ 0.564272] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 0.564565] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 0.564569] forcedeth 0000:00:08.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 0.564573] forcedeth 0000:00:08.0: setting latency timer to 64
[ 0.564625] nv_probe: set workaround bit for reversed mac addr
[ 0.590415] pata_jmicron 0000:02:00.1: PCI INT B -> Link[APC8] -> GSI 16 (level, low) -> IRQ 16
[ 0.590445] pata_jmicron 0000:02:00.1: setting latency timer to 64
[ 0.593059] scsi0 : pata_jmicron
[ 0.593641] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 0.593645] alloc irq_desc for 19 on node 0
[ 0.593646] alloc kstat_irqs on node 0
[ 0.593654] ohci1394 0000:01:0b.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 0.594024] scsi1 : pata_jmicron
[ 0.594052] ata1: PATA max UDMA/100 cmd 0x9c00 ctl 0x9800 bmdma 0x8c00 irq 16
[ 0.594054] ata2: PATA max UDMA/100 cmd 0x9400 ctl 0x9000 bmdma 0x8c08 irq 16
[ 0.594861] ahci 0000:02:00.0: version 3.0
[ 0.595093] ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
[ 0.595095] ahci 0000:02:00.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16
[ 0.610074] ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
[ 0.610077] ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part
[ 0.610081] ahci 0000:02:00.0: setting latency timer to 64
[ 0.610210] scsi2 : ahci
[ 0.610277] scsi3 : ahci
[ 0.610307] ata3: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe100 irq 16
[ 0.610310] ata4: SATA max UDMA/133 abar m8192@0xfddfe000 port 0xfddfe180 irq 16
[ 0.650046] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 0.960028] ata4: SATA link down (SStatus 0 SControl 300)
[ 0.961281] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.090620] forcedeth 0000:00:08.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:1e:8c:6d:12:6e
[ 1.090623] forcedeth 0000:00:08.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.090677] pata_amd 0000:00:04.0: version 0.4.1
[ 1.090703] pata_amd 0000:00:04.0: setting latency timer to 64
[ 1.090758] scsi4 : pata_amd
[ 1.090811] scsi5 : pata_amd
[ 1.091253] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[ 1.091255] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[ 1.091283] ata5: port disabled. ignoring.
[ 1.091303] ata6: port disabled. ignoring.
[ 1.091393] sata_nv 0000:00:05.0: version 3.5
[ 1.091400] sata_nv 0000:00:05.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[ 1.091401] sata_nv 0000:00:05.0: Using SWNCQ mode
[ 1.091755] sata_nv 0000:00:05.0: setting latency timer to 64
[ 1.091864] scsi6 : sata_nv
[ 1.091951] scsi7 : sata_nv
[ 1.092098] ata7: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 23
[ 1.092100] ata8: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 23
[ 1.092440] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 22
[ 1.092444] forcedeth 0000:00:09.0: PCI INT A -> Link[AMC1] -> GSI 22 (level, low) -> IRQ 22
[ 1.092446] forcedeth 0000:00:09.0: setting latency timer to 64
[ 1.092484] nv_probe: set workaround bit for reversed mac addr
[ 1.330012] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 1.569094] usb 2-1: configuration #1 chosen from 1 choice
[ 1.580042] ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.620645] forcedeth 0000:00:09.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:1e:8c:6d:3d:73
[ 1.620647] forcedeth 0000:00:09.0: highdma csum vlan pwrctl mgmt gbit lnktim msi desc-v3
[ 1.620957] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 21
[ 1.620961] sata_nv 0000:00:05.1: PCI INT B -> Link[APSJ] -> GSI 21 (level, low) -> IRQ 21
[ 1.620963] sata_nv 0000:00:05.1: Using SWNCQ mode
[ 1.621301] sata_nv 0000:00:05.1: setting latency timer to 64
[ 1.621409] scsi8 : sata_nv
[ 1.621474] scsi9 : sata_nv
[ 1.621623] ata9: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 21
[ 1.621625] ata10: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 21
[ 1.621697] sata_nv 0000:00:05.2: PCI INT C -> Link[ASA2] -> GSI 22 (level, low) -> IRQ 22
[ 1.621699] sata_nv 0000:00:05.2: Using SWNCQ mode
[ 1.622038] sata_nv 0000:00:05.2: setting latency timer to 64
[ 1.622162] scsi10 : sata_nv
[ 1.622225] scsi11 : sata_nv
[ 1.622448] ata11: SATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb400 irq 22
[ 1.622450] ata12: SATA max UDMA/133 cmd 0xbc00 ctl 0xb800 bmdma 0xb408 irq 22
[ 1.626233] ata7.00: ATA-7: WDC WD800JD-00LSA5, 10.01E01, max UDMA/133
[ 1.626235] ata7.00: 156301488 sectors, multi 1: LBA48
[ 1.640253] ata7.00: configured for UDMA/133
[ 1.640323] scsi 6:0:0:0: Direct-Access ATA WDC WD800JD-00LS 10.0 PQ: 0 ANSI: 5
[ 1.640431] sd 6:0:0:0: Attached scsi generic sg0 type 0
[ 1.640474] sd 6:0:0:0: [sda] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[ 1.640579] sd 6:0:0:0: [sda] Write Protect is off
[ 1.640582] sd 6:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.640598] sd 6:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.640802] sda: sda1 sda2
[ 1.642734] sd 6:0:0:0: [sda] Attached SCSI disk
[ 1.817412] kjournald starting. Commit interval 5 seconds
[ 1.817419] EXT3-fs: mounted filesystem with ordered data mode.
[ 1.910023] usb 2-2: new low speed USB device using ohci_hcd and address 3
[ 1.970138] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001e8c0000190551]
[ 2.110033] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.110106] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.130033] ata8: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.130318] ata11.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100
[ 2.131345] ata9.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 2.131347] ata9.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.141090] usb 2-2: configuration #1 chosen from 1 choice
[ 2.170290] ata11.00: configured for UDMA/100
[ 2.170470] ata8.00: ATA-8: SAMSUNG HD403LJ, CT100-10, max UDMA7
[ 2.170472] ata8.00: 781422768 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.170545] ata9.00: configured for UDMA/133
[ 2.190202] ata8.00: configured for UDMA/133
[ 2.190272] scsi 7:0:0:0: Direct-Access ATA SAMSUNG HD403LJ CT10 PQ: 0 ANSI: 5
[ 2.190381] sd 7:0:0:0: [sdb] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[ 2.190389] sd 7:0:0:0: Attached scsi generic sg1 type 0
[ 2.190414] sd 7:0:0:0: [sdb] Write Protect is off
[ 2.190416] sd 7:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.190438] sd 7:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.190457] scsi 8:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 2.190539] sd 8:0:0:0: Attached scsi generic sg2 type 0
[ 2.190546] sdb:
[ 2.190587] sd 8:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.190619] sd 8:0:0:0: [sdc] Write Protect is off
[ 2.190621] sd 8:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.190636] sd 8:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.190722] sdc: sdc1
[ 2.197670] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 2.198668] sdb1
[ 2.198783] sd 7:0:0:0: [sdb] Attached SCSI disk
[ 2.480016] usb 2-7: new full speed USB device using ohci_hcd and address 4
[ 2.680041] ata10: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.700513] ata10.00: ATA-8: WDC WD1002FAEX-00Z3A0, 05.01D05, max UDMA/133
[ 2.700515] ata10.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.707096] usb 2-7: configuration #1 chosen from 1 choice
[ 2.740564] ata10.00: configured for UDMA/133
[ 2.740614] scsi 9:0:0:0: Direct-Access ATA WDC WD1002FAEX-0 05.0 PQ: 0 ANSI: 5
[ 2.740709] sd 9:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 2.740712] sd 9:0:0:0: Attached scsi generic sg3 type 0
[ 2.740756] sd 9:0:0:0: [sdd] Write Protect is off
[ 2.740758] sd 9:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 2.740773] sd 9:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.740870] sdd:
[ 2.741403] scsi 10:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203N SB01 PQ: 0 ANSI: 5
[ 2.744527] sdd1
[ 2.744663] sd 9:0:0:0: [sdd] Attached SCSI disk
[ 2.746215] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.746218] Uniform CD-ROM driver Revision: 3.20
[ 2.746263] sr 10:0:0:0: Attached scsi CD-ROM sr0
[ 2.746298] sr 10:0:0:0: Attached scsi generic sg4 type 5
[ 3.050018] usb 2-8: new low speed USB device using ohci_hcd and address 5
[ 3.080382] ata12: SATA link down (SStatus 0 SControl 300)
[ 3.276102] usb 2-8: configuration #1 chosen from 1 choice
[ 30.343134] udev: starting version 151
[ 30.345720] Adding 4000144k swap on /dev/sda1. Priority:-1 extents:1 across:4000144k
[ 30.421549] i2c i2c-0: nForce2 SMBus adapter at 0x1c00
[ 30.421553] ACPI: resource nForce2_smbus [0x1c40-0x1c7f] conflicts with ACPI region SM00 [0x001c40-0x001c45]
[ 30.421555] ACPI: This conflict may cause random problems and system instability
[ 30.421556] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 30.421569] i2c i2c-1: nForce2 SMBus adapter at 0x1c40
[ 30.441386] lp: driver loaded but no devices found
[ 30.442295] EDAC MC: Ver: 2.1.0 Apr 16 2010
[ 30.448335] vga16fb: initializing
[ 30.448339] vga16fb: mapped to 0xffff8800000a0000
[ 30.448416] fb0: VGA16 VGA frame buffer device
[ 30.580118] nvidia: module license 'NVIDIA' taints kernel.
[ 30.580121] Disabling lock debugging due to kernel taint
[ 30.590779] type=1505 audit(1272692170.595:2): operation="profile_load" pid=722 name="/sbin/dhclient3"
[ 30.590958] type=1505 audit(1272692170.595:3): operation="profile_load" pid=722 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 30.591061] type=1505 audit(1272692170.595:4): operation="profile_load" pid=722 name="/usr/lib/connman/scripts/dhclient-script"
[ 30.687388] type=1505 audit(1272692170.685:5): operation="profile_load" pid=750 name="/usr/sbin/ntpd"
[ 30.846685] EXT3 FS on sda2, internal journal
[ 30.854669] EDAC amd64_edac: Ver: 3.2.0 Apr 16 2010
[ 30.918562] parport_pc 00:09: reported by Plug and Play ACPI
[ 30.918605] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 30.922033] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 30.923121] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 30.923128] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 30.923129] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 30.923130] (Note that use of the override may cause unknown side effects.)
[ 30.923141] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 30.926599] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
[ 30.926604] HDA Intel 0000:00:06.1: PCI INT B -> Link[AAZA] -> GSI 20 (level, low) -> IRQ 20
[ 30.926606] hda_intel: Disable MSI for Nvidia chipset
[ 30.926689] HDA Intel 0000:00:06.1: setting latency timer to 64
[ 30.930881] it87: Found IT8716F chip at 0x290, revision 1
[ 30.930890] it87: in3 is VCC (+5V)
[ 30.930891] it87: in7 is VCCH (+5V Stand-By)
[ 30.930927] ACPI: resource it87 [0x295-0x296] conflicts with ACPI region HWRE [0x295-0x296]
[ 30.930929] ACPI: This conflict may cause random problems and system instability
[ 30.930930] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 30.937368] Linux video capture interface: v2.00
[ 30.938809] gspca: main v2.7.0 registered
[ 30.939523] gspca: probing 041e:4034
[ 31.041904] usbcore: registered new interface driver hiddev
[ 31.049191] ppdev: user-space parallel port driver
[ 31.100186] lp0: using parport0 (interrupt-driven).
[ 31.101611] ACPI: PCI Interrupt Link [APC6] enabled at IRQ 16
[ 31.101615] nvidia 0000:03:00.0: PCI INT A -> Link[APC6] -> GSI 16 (level, low) -> IRQ 16
[ 31.101621] nvidia 0000:03:00.0: setting latency timer to 64
[ 31.101623] vgaarb: device changed decodes: PCI:0000:03:00.0,olddecodes=io+mem,decodes=none:ow ns=io+mem
[ 31.101814] usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x3F11
[ 31.101833] usbcore: registered new interface driver usblp
[ 31.103325] input: Silitek Standard USB Keyboard as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input3
[ 31.103392] generic-usb 0003:047B:0011.0001: input,hidraw0: USB HID v1.00 Keyboard [Silitek Standard USB Keyboard ] on usb-0000:00:02.0-2/input0
[ 31.104634] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 195.36.15 Fri Mar 12 00:29:13 PST 2010
[ 31.108291] input: Logitech Optical USB Mouse as /devices/pci0000:00/0000:00:02.0/usb2/2-8/2-8:1.0/input/input4
[ 31.108369] generic-usb 0003:046D:C016.0002: input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:02.0-8/input0
[ 31.108389] usbcore: registered new interface driver usbhid
[ 31.108391] usbhid: v2.6:USB HID core driver
[ 31.115562] Console: switching to colour frame buffer device 80x30
[ 31.359014] zc3xx: probe sif 0x0007
[ 31.371009] zc3xx: probe sensor -> 000f
[ 31.371010] zc3xx: Find Sensor PAS106
[ 31.383081] gspca: probe ok
[ 31.383101] usbcore: registered new interface driver zc3xx
[ 31.383103] zc3xx: registered
[ 32.729987] kjournald starting. Commit interval 5 seconds
[ 32.729992] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 32.730284] EXT3 FS on sdb1, internal journal
[ 32.730287] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.796500] type=1505 audit(1272692172.795:6): operation="profile_load" pid=1003 name="/usr/share/gdm/guest-session/Xsession"
[ 32.797656] type=1505 audit(1272692172.795:7): operation="profile_replace" pid=1004 name="/sbin/dhclient3"
[ 32.797844] type=1505 audit(1272692172.795:8): operation="profile_replace" pid=1004 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 32.797954] type=1505 audit(1272692172.795:9): operation="profile_replace" pid=1004 name="/usr/lib/connman/scripts/dhclient-script"
[ 32.800306] type=1505 audit(1272692172.805:10): operation="profile_load" pid=1005 name="/usr/bin/evince"
[ 32.802790] type=1505 audit(1272692172.805:11): operation="profile_load" pid=1005 name="/usr/bin/evince-previewer"
[ 32.835068] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:06.1/input/input5
[ 33.258702] alloc irq_desc for 26 on node 0
[ 33.258705] alloc kstat_irqs on node 0
[ 33.258712] forcedeth 0000:00:08.0: irq 26 for MSI/MSI-X
[ 33.263338] alloc irq_desc for 27 on node 0
[ 33.263341] alloc kstat_irqs on node 0
[ 33.263348] forcedeth 0000:00:09.0: irq 27 for MSI/MSI-X
[ 33.263531] eth1: no link during initialization.
[ 33.264602] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 33.271622] kvm: Nested Virtualization enabled
[ 35.370074] device eth0 entered promiscuous mode
[ 35.876026] CPU0 attaching NULL sched-domain.
[ 35.876031] CPU1 attaching NULL sched-domain.
[ 35.941348] CPU0 attaching sched-domain:
[ 35.941351] domain 0: span 0-1 level MC
[ 35.941353] groups: 0 1
[ 35.941357] CPU1 attaching sched-domain:
[ 35.941359] domain 0: span 0-1 level MC
[ 35.941360] groups: 1 0
[ 36.131299] device eth0 left promiscuous mode
I am aware of the bug listed at https://bugs.launchpad.net/ubuntu/+source/linux/+bug/440780. I am unsure that this is causing my RAID issue.
I get the feeling I am missing a kernel module or something for the JMicron controller. I'd like some direction so I can get this resolved.
Thank you.