PDA

View Full Version : [ubuntu] All 3D apps quits.



meciu
April 30th, 2010, 06:11 PM
Hi
I have problem with all 3d apps for example
Quake III Arena
Installed by IOQUAKE3
all working fine, but after loading game quits and in terminal i can see error


drmRadeonCmdBuffer: -22. Kernel failed to parse or rejected command stream. See dmesg for more info.


and here is dmesg


meciu@ubuntu:~$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-21-generic (buildd@rothera) (gcc version 4.4.3 (Ubuntu 4.4.3-4ubuntu5) ) #32-Ubuntu SMP Fri Apr 16 08:10:02 UTC 2010 (Ubuntu 2.6.32-21.32-generic 2.6.32.11+drm33.2)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffd0000 (usable)
[ 0.000000] BIOS-e820: 000000003ffd0000 - 000000003fff0c00 (reserved)
[ 0.000000] BIOS-e820: 000000003fff0c00 - 000000003fffc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fffc000 - 0000000040000000 (reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] last_pfn = 0x3ffd0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 disabled
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000003ffd0000 (usable)
[ 0.000000] modified: 000000003ffd0000 - 000000003fff0c00 (reserved)
[ 0.000000] modified: 000000003fff0c00 - 000000003fffc000 (ACPI NVS)
[ 0.000000] modified: 000000003fffc000 - 0000000040000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 2f882000 - 3001b212
[ 0.000000] ACPI: RSDP 000f9970 00014 (v00 COMPAQ)
[ 0.000000] ACPI: RSDT 3fff0c84 00030 (v01 COMPAQ CPQ0030 18110220 CPQ 00000001)
[ 0.000000] ACPI: FACP 3fff0c00 00084 (v02 COMPAQ CPQ0030 00000002 CPQ 00000001)
[ 0.000000] ACPI: DSDT 3fff0cb4 06FBB (v01 COMPAQ EVON600C 00010000 MSFT 0100000E)
[ 0.000000] ACPI: FACS 3fffbe80 00040
[ 0.000000] ACPI: SSDT 3fff7c6f 0004B (v01 COMPAQ CPQCPU 00001001 MSFT 0100000E)
[ 0.000000] ACPI: SSDT 3fff7cba 0010E (v01 COMPAQ CPQGysr 00001001 MSFT 0100000E)
[ 0.000000] 135MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008d9e98] TEXT DATA BSS ==> [0000100000 - 00008d9e98]
[ 0.000000] #4 [002f882000 - 003001b212] RAMDISK ==> [002f882000 - 003001b212]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [00008da000 - 00008dd108] BRK ==> [00008da000 - 00008dd108]
[ 0.000000] #7 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0003ffd0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003ffd0
[ 0.000000] On node 0 totalpages: 261995
[ 0.000000] free_area_init_node: node 0, pgdat c0798720, node_mem_map c1001000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3963 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 272 pages used for memmap
[ 0.000000] HighMem zone: 34498 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] APIC: disable apic facility
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 40000000 (gap: 40000000:c0000000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @c1c00000 s36024 r0 d21320 u4194304
[ 0.000000] pcpu-alloc: s36024 r0 d21320 u4194304 alloc=1*4194304
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259947
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-21-generic root=UUID=41ef7624-e8df-4a33-b01f-804b0637c4ec ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 5241920 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0003ffd0)
[ 0.000000] Memory: 1017484k/1048384k available (4673k kernel code, 30056k reserved, 2122k data, 656k init, 139080k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc07a3000 - 0xc0847000 ( 656 kB)
[ 0.000000] .data : 0xc0590613 - 0xc07a2e48 (2122 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0590613 (4673 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:256
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 797.423 MHz processor.
[ 0.008014] Calibrating delay loop (skipped), value calculated using timer frequency.. 1594.84 BogoMIPS (lpj=3189692)
[ 0.008073] Security Framework initialized
[ 0.008172] AppArmor: AppArmor initialized
[ 0.008198] Mount-cache hash table entries: 512
[ 0.008597] Initializing cgroup subsys ns
[ 0.008614] Initializing cgroup subsys cpuacct
[ 0.008627] Initializing cgroup subsys memory
[ 0.008655] Initializing cgroup subsys devices
[ 0.008664] Initializing cgroup subsys freezer
[ 0.008672] Initializing cgroup subsys net_cls
[ 0.008737] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 0.008747] CPU: L2 cache: 512K
[ 0.008762] mce: CPU supports 5 MCE banks
[ 0.008805] Performance Events:
[ 0.008813] no APIC, boot with the "lapic" boot parameter to force-enable it.
[ 0.008820] no hardware sampling interrupt available.
[ 0.008827] p6 PMU driver.
[ 0.008843] ... version: 0
[ 0.008849] ... bit width: 32
[ 0.008855] ... generic registers: 2
[ 0.008862] ... value mask: 00000000ffffffff
[ 0.008869] ... max period: 000000007fffffff
[ 0.008875] ... fixed-purpose events: 0
[ 0.008882] ... event mask: 0000000000000003
[ 0.008896] Checking 'hlt' instruction... OK.
[ 0.025543] SMP alternatives: switching to UP code
[ 0.041062] Freeing SMP alternatives: 19k freed
[ 0.041092] ACPI: Core revision 20090903
[ 0.058733] ACPI: setting ELCR to 0200 (from 0800)
[ 0.060017] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.060032] ftrace: allocating 21771 entries in 43 pages
[ 0.064250] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.064266] weird, boot CPU (#0) not listed by the BIOS.
[ 0.064273] SMP motherboard not detected.
[ 0.064280] Local APIC not detected. Using dummy APIC emulation.
[ 0.064287] SMP disabled
[ 0.064731] Brought up 1 CPUs
[ 0.064744] Total of 1 processors activated (1594.84 BogoMIPS).
[ 0.066282] CPU0 attaching NULL sched-domain.
[ 0.068250] devtmpfs: initialized
[ 0.069379] regulator: core version 0.5
[ 0.069415] Time: 18:40:51 Date: 04/30/10
[ 0.069553] NET: Registered protocol family 16
[ 0.069890] EISA bus registered
[ 0.069922] ACPI: bus type pci registered
[ 0.071443] PCI: PCI BIOS revision 2.10 entry at 0xf04dd, last bus=4
[ 0.071451] PCI: Using configuration type 1 for base access
[ 0.074477] bio: create slab <bio-0> at 0
[ 0.076523] ACPI: EC: Look up EC in DSDT
[ 0.113761] ACPI: Interpreter enabled
[ 0.113779] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.113845] ACPI: Using PIC for interrupt routing
[ 0.142257] ACPI: Power Resource [C14E] (on)
[ 0.142479] ACPI: Power Resource [C162] (on)
[ 0.142707] ACPI: Power Resource [C167] (on)
[ 0.142929] ACPI: Power Resource [C16B] (on)
[ 0.143036] ACPI: Power Resource [C174] (on)
[ 0.143244] ACPI: Power Resource [C1F3] (off)
[ 0.143441] ACPI: Power Resource [C1F4] (off)
[ 0.143638] ACPI: Power Resource [C1F5] (off)
[ 0.145918] ACPI: ACPI Dock Station Driver: 1 docks/bays found
[ 0.157186] ACPI: PCI Root Bridge [C03E] (0000:00)
[ 0.157298] pci 0000:00:00.0: reg 10 32bit mmio pref: [0x60000000-0x6fffffff]
[ 0.157458] pci 0000:00:1d.0: reg 20 io port: [0x4000-0x401f]
[ 0.157528] pci 0000:00:1d.1: reg 20 io port: [0x4020-0x403f]
[ 0.157597] pci 0000:00:1d.2: reg 20 io port: [0x4040-0x405f]
[ 0.157734] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
[ 0.157745] pci 0000:00:1f.0: quirk: region 1100-113f claimed by ICH4 GPIO
[ 0.157785] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.157798] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.157811] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.157824] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.157837] pci 0000:00:1f.1: reg 20 io port: [0x4060-0x406f]
[ 0.157850] pci 0000:00:1f.1: reg 24 32bit mmio: [0x000000-0x0003ff]
[ 0.157924] pci 0000:01:00.0: reg 10 32bit mmio pref: [0x48000000-0x4fffffff]
[ 0.157937] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[ 0.157949] pci 0000:01:00.0: reg 18 32bit mmio: [0x40200000-0x4020ffff]
[ 0.157971] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.157998] pci 0000:01:00.0: supports D1 D2
[ 0.158045] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[ 0.158055] pci 0000:00:01.0: bridge 32bit mmio: [0x40200000-0x402fffff]
[ 0.158065] pci 0000:00:01.0: bridge 32bit mmio pref: [0x48000000-0x4fffffff]
[ 0.158121] pci 0000:02:03.0: reg 10 32bit mmio: [0x40000000-0x40000fff]
[ 0.158147] pci 0000:02:03.0: supports D1 D2
[ 0.158155] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.158166] pci 0000:02:03.0: PME# disabled
[ 0.158211] pci 0000:02:03.1: reg 10 32bit mmio: [0x40080000-0x40080fff]
[ 0.158238] pci 0000:02:03.1: supports D1 D2
[ 0.158245] pci 0000:02:03.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.158255] pci 0000:02:03.1: PME# disabled
[ 0.158307] pci 0000:02:04.0: reg 10 32bit mmio: [0x40180000-0x401800ff]
[ 0.158321] pci 0000:02:04.0: reg 14 io port: [0x2840-0x2847]
[ 0.158334] pci 0000:02:04.0: reg 18 io port: [0x2000-0x20ff]
[ 0.158377] pci 0000:02:04.0: supports D2
[ 0.158384] pci 0000:02:04.0: PME# supported from D2 D3hot D3cold
[ 0.158393] pci 0000:02:04.0: PME# disabled
[ 0.158440] pci 0000:02:08.0: reg 10 32bit mmio: [0x40100000-0x40100fff]
[ 0.158454] pci 0000:02:08.0: reg 14 io port: [0x2800-0x283f]
[ 0.158499] pci 0000:02:08.0: supports D1 D2
[ 0.158506] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.158516] pci 0000:02:08.0: PME# disabled
[ 0.158572] pci 0000:02:09.0: reg 10 io port: [0x2400-0x24ff]
[ 0.158628] pci 0000:02:09.0: supports D1 D2
[ 0.158635] pci 0000:02:09.0: PME# supported from D1 D2 D3hot
[ 0.158645] pci 0000:02:09.0: PME# disabled
[ 0.158686] pci 0000:00:1e.0: transparent bridge
[ 0.158696] pci 0000:00:1e.0: bridge io port: [0x2000-0x2fff]
[ 0.158706] pci 0000:00:1e.0: bridge 32bit mmio: [0x40000000-0x401fffff]
[ 0.158766] pci_bus 0000:00: on NUMA node 0
[ 0.158778] ACPI: PCI Interrupt Routing Table [\_SB_.C03E._PRT]
[ 0.158906] ACPI: PCI Interrupt Routing Table [\_SB_.C03E.C03F._PRT]
[ 0.158983] ACPI: PCI Interrupt Routing Table [\_SB_.C03E.C052._PRT]
[ 0.184605] ACPI: PCI Interrupt Link [C0BA] (IRQs 5 10 *11)
[ 0.185091] ACPI: PCI Interrupt Link [C0BB] (IRQs 5 10 *11)
[ 0.185576] ACPI: PCI Interrupt Link [C0BC] (IRQs 5 10 *11)
[ 0.186060] ACPI: PCI Interrupt Link [C0BD] (IRQs 5 10 *11)
[ 0.186545] ACPI: PCI Interrupt Link [C0BE] (IRQs 5 10 *11)
[ 0.187029] ACPI: PCI Interrupt Link [C0BF] (IRQs 5 10 *11)
[ 0.187514] ACPI: PCI Interrupt Link [C0C0] (IRQs 5 10 *11)
[ 0.187973] ACPI: PCI Interrupt Link [C0C1] (IRQs 5 10 11) *0, disabled.
[ 0.188419] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks= none
[ 0.188434] vgaarb: loaded
[ 0.188792] SCSI subsystem initialized
[ 0.189011] libata version 3.00 loaded.
[ 0.189237] usbcore: registered new interface driver usbfs
[ 0.189279] usbcore: registered new interface driver hub
[ 0.189371] usbcore: registered new device driver usb
[ 0.189801] ACPI: WMI: Mapper loaded
[ 0.189808] PCI: Using ACPI for IRQ routing
[ 0.190149] NetLabel: Initializing
[ 0.190156] NetLabel: domain hash size = 128
[ 0.190161] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.190198] NetLabel: unlabeled traffic allowed by default
[ 0.190301] Switching to clocksource tsc
[ 0.193668] AppArmor: AppArmor Filesystem Enabled
[ 0.193735] pnp: PnP ACPI init
[ 0.193793] ACPI: bus type pnp registered
[ 0.231896] pnp: PnP ACPI: found 15 devices
[ 0.231905] ACPI: ACPI bus type pnp unregistered
[ 0.231915] PnPBIOS: Disabled by ACPI PNP
[ 0.231956] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.231968] system 00:00: iomem range 0xe0000-0xfffff could not be reserved
[ 0.231978] system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.232007] system 00:0c: ioport range 0x140-0x14f has been reserved
[ 0.232017] system 00:0c: iomem range 0xffb00000-0xffbfffff has been reserved
[ 0.232028] system 00:0c: iomem range 0xfff00000-0xffffffff has been reserved
[ 0.232047] system 00:0d: ioport range 0x4d0-0x4d1 has been reserved
[ 0.232057] system 00:0d: ioport range 0x1000-0x1087 could not be reserved
[ 0.232067] system 00:0d: ioport range 0x1100-0x113f has been reserved
[ 0.232077] system 00:0d: ioport range 0x1200-0x121f has been reserved
[ 0.232087] system 00:0d: iomem range 0xffc00000-0xffc003ff has been reserved
[ 0.232105] system 00:0e: iomem range 0xcf000-0xcffff has been reserved
[ 0.267230] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.267240] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.267250] pci 0000:00:01.0: MEM window: 0x40200000-0x402fffff
[ 0.267260] pci 0000:00:01.0: PREFETCH window: 0x48000000-0x4fffffff
[ 0.267288] pci 0000:02:03.0: CardBus bridge, secondary bus 0000:03
[ 0.267296] pci 0000:02:03.0: IO window: 0x002c00-0x002cff
[ 0.267306] pci 0000:02:03.0: IO window: 0x001400-0x0014ff
[ 0.267316] pci 0000:02:03.0: PREFETCH window: 0x50000000-0x53ffffff
[ 0.267327] pci 0000:02:03.0: MEM window: 0x44000000-0x47ffffff
[ 0.267337] pci 0000:02:03.1: CardBus bridge, secondary bus 0000:04
[ 0.267345] pci 0000:02:03.1: IO window: 0x001800-0x0018ff
[ 0.267355] pci 0000:02:03.1: IO window: 0x001c00-0x001cff
[ 0.267365] pci 0000:02:03.1: PREFETCH window: 0x54000000-0x57ffffff
[ 0.267375] pci 0000:02:03.1: MEM window: 0x58000000-0x5bffffff
[ 0.267385] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.267394] pci 0000:00:1e.0: IO window: 0x2000-0x2fff
[ 0.267405] pci 0000:00:1e.0: MEM window: 0x40000000-0x401fffff
[ 0.267416] pci 0000:00:1e.0: PREFETCH window: 0x50000000-0x57ffffff
[ 0.267445] pci 0000:00:1e.0: setting latency timer to 64
[ 0.268160] ACPI: PCI Interrupt Link [C0C0] enabled at IRQ 11
[ 0.268168] PCI: setting IRQ 11 as level-triggered
[ 0.268180] pci 0000:02:03.0: PCI INT A -> Link[C0C0] -> GSI 11 (level, low) -> IRQ 11
[ 0.268204] pci 0000:02:03.1: PCI INT A -> Link[C0C0] -> GSI 11 (level, low) -> IRQ 11
[ 0.268220] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.268229] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.268238] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.268247] pci_bus 0000:01: resource 1 mem: [0x40200000-0x402fffff]
[ 0.268256] pci_bus 0000:01: resource 2 pref mem [0x48000000-0x4fffffff]
[ 0.268265] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.268273] pci_bus 0000:02: resource 1 mem: [0x40000000-0x401fffff]
[ 0.268282] pci_bus 0000:02: resource 2 pref mem [0x50000000-0x57ffffff]
[ 0.268291] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.268299] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.268308] pci_bus 0000:03: resource 0 io: [0x2c00-0x2cff]
[ 0.268316] pci_bus 0000:03: resource 1 io: [0x1400-0x14ff]
[ 0.268325] pci_bus 0000:03: resource 2 pref mem [0x50000000-0x53ffffff]
[ 0.268334] pci_bus 0000:03: resource 3 mem: [0x44000000-0x47ffffff]
[ 0.268342] pci_bus 0000:04: resource 0 io: [0x1800-0x18ff]
[ 0.268351] pci_bus 0000:04: resource 1 io: [0x1c00-0x1cff]
[ 0.268359] pci_bus 0000:04: resource 2 pref mem [0x54000000-0x57ffffff]
[ 0.268368] pci_bus 0000:04: resource 3 mem: [0x58000000-0x5bffffff]
[ 0.268483] NET: Registered protocol family 2
[ 0.268793] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.269937] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.274442] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.276934] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.276945] TCP reno registered
[ 0.277384] NET: Registered protocol family 1
[ 0.277533] pci 0000:01:00.0: Boot video device
[ 0.277663] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.278244] speedstep-lib: frequency transition measured seems out of range (7200 nSec), falling back to a safe one of500000 nSec.
[ 0.278307] Marking TSC unstable due to cpufreq changes
[ 0.278435] cpufreq-nforce2: No nForce2 chipset.
[ 0.278494] Scanning for low memory corruption every 60 seconds
[ 0.278735] audit: initializing netlink socket (disabled)
[ 0.278766] type=2000 audit(1272652851.277:1): initialized
[ 0.303108] Trying to unpack rootfs image as initramfs...
[ 0.306602] Switching to clocksource acpi_pm
[ 0.328850] highmem bounce pool size: 64 pages
[ 0.328867] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.335940] VFS: Disk quotas dquot_6.5.2
[ 0.336162] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.340288] fuse init (API version 7.13)
[ 0.340556] msgmni has been set to 1716
[ 0.344469] alg: No test for stdrng (krng)
[ 0.344635] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.344643] io scheduler noop registered
[ 0.344647] io scheduler anticipatory registered
[ 0.344652] io scheduler deadline registered
[ 0.344770] io scheduler cfq registered (default)
[ 0.345034] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.345087] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.345572] ACPI: AC Adapter [C1A2] (off-line)
[ 0.345784] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 0.345800] ACPI: Sleep Button [C1A3]
[ 0.345896] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.346026] ACPI: Lid Switch [C1A4]
[ 0.346123] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.346129] ACPI: Power Button [PWRF]
[ 0.346464] fan PNP0C0B:00: registered as cooling_device0
[ 0.346477] ACPI: Fan [C1F6] (off)
[ 0.346744] fan PNP0C0B:01: registered as cooling_device1
[ 0.346756] ACPI: Fan [C1F7] (off)
[ 0.347027] fan PNP0C0B:02: registered as cooling_device2
[ 0.347039] ACPI: Fan [C1F8] (off)
[ 0.347689] processor LNXCPU:00: registered as cooling_device3
[ 0.381642] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.381670] ACPI: Thermal Zone [TZ1] (52 C)
[ 0.392949] ACPI: Battery Slot [C1A0] (battery absent)
[ 0.393008] isapnp: Scanning for PnP cards...
[ 0.399569] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.399697] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.399868] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
[ 0.400297] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.402854] brd: module loaded
[ 0.403928] loop: module loaded
[ 0.456282] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.456589] ata_piix 0000:00:1f.1: version 2.13
[ 0.456616] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.462131] ACPI: PCI Interrupt Link [C0BC] enabled at IRQ 11
[ 0.462147] ata_piix 0000:00:1f.1: PCI INT A -> Link[C0BC] -> GSI 11 (level, low) -> IRQ 11
[ 0.462254] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.462468] scsi0 : ata_piix
[ 0.464556] scsi1 : ata_piix
[ 0.465977] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x4060 irq 14
[ 0.465984] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x4068 irq 15
[ 0.466892] Fixed MDIO Bus: probed
[ 0.466975] PPP generic driver version 2.4.2
[ 0.467134] tun: Universal TUN/TAP device driver, 1.6
[ 0.467139] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 0.467356] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.467394] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.467424] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.473442] ACPI: PCI Interrupt Link [C0BA] enabled at IRQ 11
[ 0.473457] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[C0BA] -> GSI 11 (level, low) -> IRQ 11
[ 0.473481] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.473488] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.473670] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.473715] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00004000
[ 0.473974] usb usb1: configuration #1 chosen from 1 choice
[ 0.474041] hub 1-0:1.0: USB hub found
[ 0.474061] hub 1-0:1.0: 2 ports detected
[ 0.474682] ACPI: PCI Interrupt Link [C0BD] enabled at IRQ 11
[ 0.474691] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[C0BD] -> GSI 11 (level, low) -> IRQ 11
[ 0.474704] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.474710] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.474800] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 0.474830] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00004020
[ 0.475020] usb usb2: configuration #1 chosen from 1 choice
[ 0.475075] hub 2-0:1.0: USB hub found
[ 0.475094] hub 2-0:1.0: 2 ports detected
[ 0.475178] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[C0BC] -> GSI 11 (level, low) -> IRQ 11
[ 0.475190] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.475196] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.475270] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 0.475298] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00004040
[ 0.475482] usb usb3: configuration #1 chosen from 1 choice
[ 0.475538] hub 3-0:1.0: USB hub found
[ 0.475554] hub 3-0:1.0: 2 ports detected
[ 0.475763] PNP: PS/2 Controller [PNP0303:C171,PNP0f0e:C172] at 0x60,0x64 irq 1,12
[ 0.477311] i8042.c: Detected active multiplexing controller, rev 1.0.
[ 0.480843] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.480872] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.480970] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.481040] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.481091] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.481430] mice: PS/2 mouse device common for all mice
[ 0.481744] rtc_cmos 00:09: RTC can wake from S4
[ 0.481843] rtc_cmos 00:09: rtc core: registered rtc_cmos as rtc0
[ 0.481871] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.482154] device-mapper: uevent: version 1.0.3
[ 0.484742] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.488451] device-mapper: multipath: version 1.1.0 loaded
[ 0.488462] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.488948] EISA: Probing bus 0 at eisa.0
[ 0.488962] Cannot allocate resource for EISA slot 1
[ 0.488968] Cannot allocate resource for EISA slot 2
[ 0.488973] Cannot allocate resource for EISA slot 3
[ 0.488977] Cannot allocate resource for EISA slot 4
[ 0.488994] EISA: Detected 0 cards.
[ 0.489242] cpuidle: using governor ladder
[ 0.489364] cpuidle: using governor menu
[ 0.490443] TCP cubic registered
[ 0.490820] NET: Registered protocol family 10
[ 0.491925] lo: Disabled Privacy Extensions
[ 0.492743] NET: Registered protocol family 17
[ 0.492861] Using IPI No-Shortcut mode
[ 0.493085] PM: Resume from disk failed.
[ 0.493122] registered taskstats version 1
[ 0.493455] Magic number: 6:285:697
[ 0.493643] rtc_cmos 00:09: setting system clock to 2010-04-30 18:40:51 UTC (1272652851)
[ 0.493650] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.493654] EDD information not available.
[ 0.503325] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.672676] ata1.00: ATA-5: IC25N030ATCS04-0, CA3OA71A, max UDMA/100
[ 0.672685] ata1.00: 58605120 sectors, multi 16: LBA
[ 0.688567] ata1.00: configured for UDMA/100
[ 0.727287] ACPI: Battery Slot [C19F] (battery present)
[ 0.784359] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 0.793034] ata2.00: ATAPI: Compaq DVD-ROM DRN-8080B, 2.18, max MWDMA2
[ 0.808541] ata2.00: configured for MWDMA2
[ 1.004429] usb 2-1: configuration #1 chosen from 1 choice
[ 1.139752] isapnp: No Plug & Play device found
[ 1.140188] scsi 0:0:0:0: Direct-Access ATA IC25N030ATCS04-0 CA3O PQ: 0 ANSI: 5
[ 1.140587] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.140973] sd 0:0:0:0: [sda] 58605120 512-byte logical blocks: (30.0 GB/27.9 GiB)
[ 1.141094] sd 0:0:0:0: [sda] Write Protect is off
[ 1.141101] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.141162] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.141507] sda:
[ 1.145850] scsi 1:0:0:0: CD-ROM COMPAQ DVD-ROM DRN8080B 2.18 PQ: 0 ANSI: 5
[ 1.149042] sr0: scsi3-mmc drive: 0x/24x cd/rw xa/form2 cdda tray
[ 1.149051] Uniform CD-ROM driver Revision: 3.20
[ 1.149302] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.149464] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.171983] sda1 sda2 < sda5 >
[ 1.193157] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.196719] Freeing initrd memory: 7780k freed
[ 1.216838] Freeing unused kernel memory: 656k freed
[ 1.218654] Write protecting the kernel text: 4676k
[ 1.218732] Write protecting the kernel read-only data: 1840k
[ 1.257842] udev: starting version 151
[ 1.806832] Floppy drive(s): fd0 is 1.44M
[ 1.829241] FDC 0 is a post-1991 82077
[ 1.845148] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.845155] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.845834] ACPI: PCI Interrupt Link [C0BE] enabled at IRQ 11
[ 1.845844] e100 0000:02:08.0: PCI INT A -> Link[C0BE] -> GSI 11 (level, low) -> IRQ 11
[ 1.933597] e100 0000:02:08.0: PME# disabled
[ 1.935313] e100: eth0: e100_probe: addr 0x40100000, irq 11, MAC addr 00:02:a5:b8:88:7b
[ 2.150629] EXT4-fs (sda1): INFO: recovery required on readonly filesystem
[ 2.150641] EXT4-fs (sda1): write access will be enabled during recovery
[ 3.747322] EXT4-fs (sda1): recovery complete
[ 3.748599] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 25.954827] Adding 1253368k swap on /dev/sda5. Priority:-1 extents:1 across:1253368k
[ 25.998189] udev: starting version 151
[ 26.033466] Disabling lock debugging due to kernel taint
[ 26.518857] ndiswrapper version 1.55 loaded (smp=yes, preempt=no)
[ 26.529633] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
[ 27.176623] irda_init()
[ 27.176665] NET: Registered protocol family 23
[ 27.238390] Linux agpgart interface v0.103
[ 27.259439] parport_pc 00:05: reported by Plug and Play ACPI
[ 27.259480] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 27.285837] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 27.293353] intel_rng: FWH not detected
[ 27.338965] found SMC SuperIO Chip (devid=0x0e rev=01 base=0x002e): LPC47N252
[ 27.338991] smsc_ircc_present: can't get sir_base of 0x3e8
[ 27.371989] agpgart-intel 0000:00:00.0: Intel 830M Chipset
[ 27.400882] usb 2-1: reset full speed USB device using uhci_hcd and address 2
[ 27.467564] ppdev: user-space parallel port driver
[ 27.541336] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x60000000
[ 27.646208] type=1505 audit(1272645678.650:2): operation="profile_load" pid=621 name="/sbin/dhclient3"
[ 27.647126] type=1505 audit(1272645678.650:3): operation="profile_load" pid=621 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 27.647625] type=1505 audit(1272645678.650:4): operation="profile_load" pid=621 name="/usr/lib/connman/scripts/dhclient-script"
[ 27.685560] ndiswrapper: driver netwg11t (NETGEAR,01/07/2005,1.0.1.1007) loaded
[ 27.732096] [drm] Initialized drm 1.1.0 20060810
[ 27.921164] yenta_cardbus 0000:02:03.0: CardBus bridge found [0e11:004e]
[ 27.921190] yenta_cardbus 0000:02:03.0: Enabling burst memory read transactions
[ 27.921198] yenta_cardbus 0000:02:03.0: Using CSCINT to route CSC interrupts to PCI
[ 27.921204] yenta_cardbus 0000:02:03.0: Routing CardBus interrupts to PCI
[ 27.921212] yenta_cardbus 0000:02:03.0: TI: mfunc 0x01001002, devctl 0x64
[ 28.155093] wlan0: ethernet device 00:14:6c:ec:12:48 using NDIS driver: netwg11t, version: 0x10000, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 1385:4250.F.conf
[ 28.155136] wlan0: encryption modes supported: WEP; TKIP with WPA; AES/CCMP with WPA
[ 28.155592] usbcore: registered new interface driver ndiswrapper
[ 28.160516] yenta_cardbus 0000:02:03.0: ISA IRQ mask 0x0438, PCI irq 11
[ 28.160526] yenta_cardbus 0000:02:03.0: Socket status: 30000006
[ 28.160544] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 28.160554] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x2000-0x2fff: clean.
[ 28.160933] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x401fffff
[ 28.160941] yenta_cardbus 0000:02:03.0: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff
[ 28.160965] Synaptics Touchpad, model: 1, fw: 5.8, id: 0x9b48b1, caps: 0x884793/0x0
[ 28.160974] serio: Synaptics pass-through port at isa0060/serio4/input0
[ 28.171463] yenta_cardbus 0000:02:03.1: CardBus bridge found [0e11:004e]
[ 28.171488] yenta_cardbus 0000:02:03.1: Using CSCINT to route CSC interrupts to PCI
[ 28.171493] yenta_cardbus 0000:02:03.1: Routing CardBus interrupts to PCI
[ 28.171501] yenta_cardbus 0000:02:03.1: TI: mfunc 0x01001002, devctl 0x64
[ 28.255156] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5
[ 28.360557] [drm] radeon defaulting to kernel modesetting.
[ 28.360570] [drm] radeon kernel modesetting enabled.
[ 28.361314] ACPI: PCI Interrupt Link [C0BB] enabled at IRQ 11
[ 28.361324] radeon 0000:01:00.0: PCI INT A -> Link[C0BB] -> GSI 11 (level, low) -> IRQ 11
[ 28.400553] yenta_cardbus 0000:02:03.1: ISA IRQ mask 0x0438, PCI irq 11
[ 28.400562] yenta_cardbus 0000:02:03.1: Socket status: 30000006
[ 28.400570] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #04 to #07
[ 28.400590] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 28.400599] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x2000-0x2fff: clean.
[ 28.400978] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge Memory window: 0x40000000 - 0x401fffff
[ 28.400986] yenta_cardbus 0000:02:03.1: pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x57ffffff
[ 28.417391] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 28.426585] [drm] radeon: Initializing kernel modesetting.
[ 28.429603] [drm] register mmio base: 0x40200000
[ 28.429611] [drm] register mmio size: 65536
[ 28.430079] [drm] GPU reset succeed (RBBM_STATUS=0x00000140)
[ 28.430119] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 28.430144] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 28.430170] radeon 0000:01:00.0: putting AGP V2 device into 4x mode
[ 28.430204] [drm] radeon: VRAM 64M
[ 28.430209] [drm] radeon: VRAM from 0x00000000 to 0x03FFFFFF
[ 28.430213] [drm] radeon: GTT 256M
[ 28.430217] [drm] radeon: GTT from 0x60000000 to 0x6FFFFFFF
[ 28.430264] [drm] radeon: irq initialized.
[ 28.430632] [drm] Detected VRAM RAM=64M, BAR=128M
[ 28.430642] [drm] RAM width 64bits DDR
[ 28.447789] lp0: using parport0 (interrupt-driven).
[ 28.463210] [TTM] Zone kernel: Available graphics memory: 443650 kiB.
[ 28.463218] [TTM] Zone highmem: Available graphics memory: 513190 kiB.
[ 28.463266] [drm] radeon: 32M of VRAM memory ready
[ 28.463271] [drm] radeon: 256M of GTT memory ready.
[ 28.504626] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.547136] [drm] radeon: cp idle (0x00008080)
[ 28.547299] [drm] Loading R100 Microcode
[ 28.547891] platform radeon_cp.0: firmware: requesting radeon/R100_cp.bin
[ 28.643842] type=1505 audit(1272645679.646:5): operation="profile_load" pid=734 name="/usr/share/gdm/guest-session/Xsession"
[ 28.674205] type=1505 audit(1272645679.678:6): operation="profile_replace" pid=740 name="/sbin/dhclient3"
[ 28.675117] type=1505 audit(1272645679.678:7): operation="profile_replace" pid=740 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 28.675823] type=1505 audit(1272645679.678:8): operation="profile_replace" pid=740 name="/usr/lib/connman/scripts/dhclient-script"
[ 28.713425] [drm] radeon: ring at 0x0000000060000000
[ 28.713453] [drm] ring test succeeded in 1 usecs
[ 28.765999] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: excluding 0x100-0x107
[ 28.766892] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: clean.
[ 28.767301] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 28.767669] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 28.769494] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 28.780699] type=1505 audit(1272645679.786:9): operation="profile_load" pid=741 name="/usr/bin/evince"
[ 28.815216] type=1505 audit(1272645679.818:10): operation="profile_load" pid=741 name="/usr/bin/evince-previewer"
[ 28.826871] [drm] radeon: ib pool ready.
[ 28.827064] [drm] ib test succeeded in 0 usecs
[ 28.832356] [drm] Panel ID String: Samsung LTN150P1-L02
[ 28.832366] [drm] Panel Size 1400x1050
[ 28.832681] [drm] Default TV standard: NTSC
[ 28.832685] [drm] 27.000000000 MHz TV ref clk
[ 28.832693] [drm] Default TV standard: NTSC
[ 28.832696] [drm] 27.000000000 MHz TV ref clk
[ 28.832958] [drm] Radeon Display Connectors
[ 28.832964] [drm] Connector 0:
[ 28.832968] [drm] VGA
[ 28.832974] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 28.832978] [drm] Encoders:
[ 28.832981] [drm] CRT1: INTERNAL_DAC1
[ 28.832985] [drm] Connector 1:
[ 28.832989] [drm] LVDS
[ 28.832991] [drm] Encoders:
[ 28.832995] [drm] LCD1: INTERNAL_LVDS
[ 28.832998] [drm] Connector 2:
[ 28.833002] [drm] S-video
[ 28.833004] [drm] Encoders:
[ 28.833008] [drm] TV1: INTERNAL_DAC2
[ 28.880142] type=1505 audit(1272645679.886:11): operation="profile_load" pid=741 name="/usr/bin/evince-thumbnailer"
[ 29.007455] [drm] fb mappable at 0x48040000
[ 29.007462] [drm] vram apper at 0x48000000
[ 29.007467] [drm] size 1478400
[ 29.007470] [drm] fb depth is 8
[ 29.007473] [drm] pitch is 1408
[ 29.012890] fb0: radeondrmfb frame buffer device
[ 29.012897] registered panic notifier
[ 29.012912] [drm] Initialized radeon 2.0.0 20080528 for 0000:01:00.0 on minor 0
[ 29.035209] vga16fb: initializing
[ 29.035221] vga16fb: mapped to 0xc00a0000
[ 29.035235] vga16fb: not registering due to another framebuffer present
[ 29.241326] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: excluding 0x100-0x107
[ 29.242219] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean.
[ 29.258767] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 29.259150] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 29.259777] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 29.318291] Maestro3 0000:02:09.0: PCI INT A -> Link[C0BA] -> GSI 11 (level, low) -> IRQ 11
[ 29.318309] Maestro3 0000:02:09.0: firmware: requesting ess/maestro3_assp_kernel.fw
[ 29.326940] Maestro3 0000:02:09.0: firmware: requesting ess/maestro3_assp_minisrc.fw
[ 29.383249] Console: switching to colour frame buffer device 175x65
[ 31.998952] psmouse serio5: ID: 10 00 64
[ 36.587036] IBM TrackPoint firmware: 0x0b, buttons: 2/3
[ 36.869585] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input6
[ 43.783295] ndiswrapper (iw_set_auth:1602): invalid cmd 12
[ 43.828268] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 53.844036] wlan0: no IPv6 routers present
[ 72.571764] end_request: I/O error, dev fd0, sector 0
[ 106.519031] end_request: I/O error, dev fd0, sector 0
[ 135.023250] [drm:r100_cs_track_texture_check] *ERROR* No texture bound to unit 1
[ 135.023262] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 140.466871] end_request: I/O error, dev fd0, sector 0
[ 140.466891] __ratelimit: 9 callbacks suppressed
[ 140.466899] Buffer I/O error on device fd0, logical block 0
[ 174.543799] end_request: I/O error, dev fd0, sector 0
[ 174.543820] Buffer I/O error on device fd0, logical block 0
[ 208.531279] end_request: I/O error, dev fd0, sector 0
[ 208.531297] Buffer I/O error on device fd0, logical block 0
[ 242.844343] end_request: I/O error, dev fd0, sector 0
[ 242.844364] Buffer I/O error on device fd0, logical block 0
[ 277.698305] end_request: I/O error, dev fd0, sector 0
[ 277.698325] Buffer I/O error on device fd0, logical block 0
[ 311.991222] end_request: I/O error, dev fd0, sector 0
[ 311.991242] Buffer I/O error on device fd0, logical block 0
[ 346.189356] end_request: I/O error, dev fd0, sector 0
[ 346.189376] Buffer I/O error on device fd0, logical block 0
[ 380.432184] end_request: I/O error, dev fd0, sector 0
[ 380.432206] Buffer I/O error on device fd0, logical block 0
[ 414.791392] end_request: I/O error, dev fd0, sector 0
[ 414.791412] Buffer I/O error on device fd0, logical block 0
[ 448.886348] end_request: I/O error, dev fd0, sector 0
[ 448.886369] Buffer I/O error on device fd0, logical block 0
[ 483.109190] end_request: I/O error, dev fd0, sector 0
[ 483.109206] Buffer I/O error on device fd0, logical block 0
[ 517.026382] end_request: I/O error, dev fd0, sector 0
[ 517.026399] Buffer I/O error on device fd0, logical block 0
[ 551.018126] end_request: I/O error, dev fd0, sector 0
[ 551.018146] Buffer I/O error on device fd0, logical block 0
[ 585.086823] end_request: I/O error, dev fd0, sector 0
[ 585.086842] Buffer I/O error on device fd0, logical block 0
[ 619.425779] end_request: I/O error, dev fd0, sector 0
[ 619.425796] Buffer I/O error on device fd0, logical block 0
[ 653.554299] end_request: I/O error, dev fd0, sector 0
[ 653.554327] Buffer I/O error on device fd0, logical block 0
[ 687.806164] end_request: I/O error, dev fd0, sector 0
[ 687.806184] Buffer I/O error on device fd0, logical block 0
[ 716.583297] [drm:r100_cs_track_texture_check] *ERROR* No texture bound to unit 1
[ 716.583312] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 721.765927] end_request: I/O error, dev fd0, sector 0
[ 721.765948] Buffer I/O error on device fd0, logical block 0
[ 755.916583] end_request: I/O error, dev fd0, sector 0
[ 755.916600] Buffer I/O error on device fd0, logical block 0
[ 790.397778] end_request: I/O error, dev fd0, sector 0
[ 790.397799] Buffer I/O error on device fd0, logical block 0
[ 824.441064] end_request: I/O error, dev fd0, sector 0
[ 824.441080] Buffer I/O error on device fd0, logical block 0
[ 858.806100] end_request: I/O error, dev fd0, sector 0
[ 858.806120] Buffer I/O error on device fd0, logical block 0
[ 892.727617] end_request: I/O error, dev fd0, sector 0
[ 892.727644] Buffer I/O error on device fd0, logical block 0
[ 926.892041] end_request: I/O error, dev fd0, sector 0
[ 926.892041] Buffer I/O error on device fd0, logical block 0
[ 960.940545] end_request: I/O error, dev fd0, sector 0
[ 960.940577] Buffer I/O error on device fd0, logical block 0
[ 995.182086] end_request: I/O error, dev fd0, sector 0
[ 995.182113] Buffer I/O error on device fd0, logical block 0
[ 1029.194438] end_request: I/O error, dev fd0, sector 0
[ 1029.194466] Buffer I/O error on device fd0, logical block 0
[ 1063.189837] end_request: I/O error, dev fd0, sector 0
[ 1063.189863] Buffer I/O error on device fd0, logical block 0
[ 1097.166533] end_request: I/O error, dev fd0, sector 0
[ 1097.166562] Buffer I/O error on device fd0, logical block 0
[ 1131.264852] end_request: I/O error, dev fd0, sector 0
[ 1131.264892] Buffer I/O error on device fd0, logical block 0
[ 1165.378405] end_request: I/O error, dev fd0, sector 0
[ 1165.378430] Buffer I/O error on device fd0, logical block 0
[ 1199.434677] end_request: I/O error, dev fd0, sector 0
[ 1199.434708] Buffer I/O error on device fd0, logical block 0
[ 1233.475902] end_request: I/O error, dev fd0, sector 0
[ 1233.475932] Buffer I/O error on device fd0, logical block 0
[ 1267.564028] end_request: I/O error, dev fd0, sector 0
[ 1267.564028] Buffer I/O error on device fd0, logical block 0
[ 1301.493847] end_request: I/O error, dev fd0, sector 0
[ 1301.493875] Buffer I/O error on device fd0, logical block 0
[ 1335.530650] end_request: I/O error, dev fd0, sector 0
[ 1335.530676] Buffer I/O error on device fd0, logical block 0
[ 1369.462339] end_request: I/O error, dev fd0, sector 0
[ 1369.462364] Buffer I/O error on device fd0, logical block 0
[ 1403.386715] end_request: I/O error, dev fd0, sector 0
[ 1403.386741] Buffer I/O error on device fd0, logical block 0
[ 1437.306585] end_request: I/O error, dev fd0, sector 0
[ 1437.306611] Buffer I/O error on device fd0, logical block 0
[ 1471.236005] end_request: I/O error, dev fd0, sector 0
[ 1471.236026] Buffer I/O error on device fd0, logical block 0
[ 1474.456446] [drm:r100_cs_track_texture_check] *ERROR* No texture bound to unit 1
[ 1474.456468] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
[ 1505.186708] end_request: I/O error, dev fd0, sector 0
[ 1539.221811] end_request: I/O error, dev fd0, sector 0
[ 1573.241837] end_request: I/O error, dev fd0, sector 0
[ 1607.306618] end_request: I/O error, dev fd0, sector 0
[ 1607.306645] Buffer I/O error on device fd0, logical block 0
[ 1628.060092] [drm:r100_cs_track_texture_check] *ERROR* No texture bound to unit 1
[ 1628.060107] [drm:radeon_cs_ioctl] *ERROR* Invalid command stream !
meciu@ubuntu:~$


My X11


Section "Device"
Identifier "ATI Technologies, Inc. Radeon Mobility M6 LY [Radeon Mobility 9000]"
Driver "radeon"
BusID "PCI:1:0:0"
# Acceleration
Option "AGPMode" "4"
Option "AGPSize" "64" # default: 8
Option "RingSize" "8"
Option "BufferSize" "2"
# Option "SWcursor" "off"
# Option "EnablePageFlip" "true"
# Option "ColorTiling" "on"
# Option "EnableDepthMoves" "true"
# Enable (partial) PowerPlay features
Option "DynamicClocks" "on"
# Use bios hot keys on ThinkPad (aka fn+f7)
Option "BIOSHotkeys" "on"
# Enable AIGLX
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
EndSection

Its Laptop Compaq Evo N600c
Intel Pentium III 1,2 GHz
1024MB SDRAM 133 MHz
Radeon M6 LY

Ubuntu 10.04

sorry for my bad english

razy8
June 27th, 2010, 01:14 PM
same here

anybody out there ?