PDA

View Full Version : [ubuntu] Atheros adapter w IBM T40p ; no connection to wireless access point



zorrocket
March 29th, 2010, 09:07 PM
Hello,

I am new to Ubuntu, and would like to use it on my old laptop (thinkpad T40p 2373-G1G). Overall, it runs smoothly. My main problem for now is to establish a wireless connection with a router. The network manager displays a list of SSIDs, including mine, which I left unprotected for now, to leave out any issues due to encryption, etc... After I select my SSID, the network manager's panel icon spins for a minute, then nothing. To me, it seems that the association with the access point fails, but I don't know why.
My router works fine, as several other network devices are using it without a problem. Any suggestions welcome. :)

I have the following information about my system.

lshw -C network returns :

*-network:1
description: Wireless interface
product: AR5211 802.11ab NIC
vendor: Atheros Communications Inc.
physical id: 2
bus info: pci@0000:02:02.0
logical name: wmaster0
version: 01
serial: 00:05:4e:xx:xx:xx
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list logical ethernet physical wireless
configuration: broadcast=yes driver=ath5k latency=168 maxlatency=28 mingnt=10 multicast=yes wireless=IEEE 802.11ab
resources: irq:11 memory:c0210000-c021ffff

iwconfig wlan0 returns:

wlan0 IEEE 802.11ab ESSID:"guest"
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

lsmod returns:

Module Size Used by
binfmt_misc 8356 1
joydev 10240 0
pcmcia 36808 0
ath_pci 197044 0
arc4 1660 2
wlan 228464 1 ath_pci
ecb 2524 2
snd_intel8x0 30168 2
snd_ac97_codec 101216 1 snd_intel8x0
ac97_bus 1532 1 snd_ac97_codec
snd_pcm_oss 37920 0
snd_mixer_oss 16028 1 snd_pcm_oss
snd_pcm 75296 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
iptable_filter 3100 0
ath_hal 397504 1 ath_pci
ppdev 6688 0
yenta_socket 24296 2
rsrc_nonstatic 11644 1 yenta_socket
pcmcia_core 36528 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_seq_dummy 2656 0
ip_tables 11692 1 iptable_filter
x_tables 16544 1 ip_tables
thinkpad_acpi 66916 0
nvram 7528 1 thinkpad_acpi
ath5k 124772 0
mac80211 181140 1 ath5k
led_class 4096 2 thinkpad_acpi,ath5k
ath 8060 1 ath5k
cfg80211 93052 3 ath5k,mac80211,ath
parport_pc 31940 1
nsc_ircc 20976 0
irda 189564 1 nsc_ircc
crc_ccitt 1852 1 irda
psmouse 56500 0
serio_raw 5280 0
shpchp 32272 0
snd_seq_oss 28576 0
snd_seq_midi 6464 0
snd_rawmidi 22176 1 snd_seq_midi
snd_seq_midi_event 6940 2 snd_seq_oss,snd_seq_midi
snd_seq 50224 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_mid i_event
snd_timer 22276 2 snd_pcm,snd_seq
snd_seq_device 6920 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi ,snd_seq
snd 59204 14 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_ oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_ti mer,snd_seq_device
soundcore 7264 1 snd
snd_page_alloc 9156 2 snd_intel8x0,snd_pcm
lp 8964 0
parport 35340 3 ppdev,parport_pc,lp
usbhid 38208 0
video 19380 0
output 2780 1 video
floppy 54916 0
radeon 636000 2
ttm 36212 1 radeon
drm 160032 4 radeon,ttm
i2c_algo_bit 5760 1 radeon
e1000 119072 0
intel_agp 27676 1
agpgart 34988 3 ttm,drm,intel_agp

dmesg returns :

[ 0.096658] pci 0000:00:1f.5: reg 10 io port: [0x1c00-0x1cff]
[ 0.096665] pci 0000:00:1f.5: reg 14 io port: [0x18c0-0x18ff]
[ 0.096672] pci 0000:00:1f.5: reg 18 32bit mmio: [0xc0000c00-0xc0000dff]
[ 0.096680] pci 0000:00:1f.5: reg 1c 32bit mmio: [0xc0000800-0xc00008ff]
[ 0.096710] pci 0000:00:1f.5: PME# supported from D0 D3hot D3cold
[ 0.096715] pci 0000:00:1f.5: PME# disabled
[ 0.096746] pci 0000:00:1f.6: reg 10 io port: [0x2400-0x24ff]
[ 0.096753] pci 0000:00:1f.6: reg 14 io port: [0x2000-0x207f]
[ 0.096791] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[ 0.096796] pci 0000:00:1f.6: PME# disabled
[ 0.096835] pci 0000:01:00.0: reg 10 32bit mmio: [0xe0000000-0xe7ffffff]
[ 0.096842] pci 0000:01:00.0: reg 14 io port: [0x3000-0x30ff]
[ 0.096848] pci 0000:01:00.0: reg 18 32bit mmio: [0xc0100000-0xc010ffff]
[ 0.096864] pci 0000:01:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 0.096884] pci 0000:01:00.0: supports D1 D2
[ 0.096920] pci 0000:00:01.0: bridge io port: [0x3000-0x3fff]
[ 0.096925] pci 0000:00:01.0: bridge 32bit mmio: [0xc0100000-0xc01fffff]
[ 0.096929] pci 0000:00:01.0: bridge 32bit mmio pref: [0xe0000000-0xe7ffffff]
[ 0.096966] pci 0000:02:00.0: reg 10 32bit mmio: [0xb0000000-0xb0000fff]
[ 0.096986] pci 0000:02:00.0: supports D1 D2
[ 0.096989] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.096994] pci 0000:02:00.0: PME# disabled
[ 0.097030] pci 0000:02:00.1: reg 10 32bit mmio: [0xb1000000-0xb1000fff]
[ 0.097050] pci 0000:02:00.1: supports D1 D2
[ 0.097052] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.097058] pci 0000:02:00.1: PME# disabled
[ 0.097105] pci 0000:02:01.0: reg 10 32bit mmio: [0xc0220000-0xc023ffff]
[ 0.097113] pci 0000:02:01.0: reg 14 32bit mmio: [0xc0200000-0xc020ffff]
[ 0.097120] pci 0000:02:01.0: reg 18 io port: [0x8000-0x803f]
[ 0.097141] pci 0000:02:01.0: reg 30 32bit mmio: [0x000000-0x00ffff]
[ 0.097165] pci 0000:02:01.0: PME# supported from D0 D3hot D3cold
[ 0.097170] pci 0000:02:01.0: PME# disabled
[ 0.097205] pci 0000:02:02.0: reg 10 32bit mmio: [0xc0210000-0xc021ffff]
[ 0.097288] pci 0000:00:1e.0: transparent bridge
[ 0.097293] pci 0000:00:1e.0: bridge io port: [0x4000-0x8fff]
[ 0.097298] pci 0000:00:1e.0: bridge 32bit mmio: [0xc0200000-0xcfffffff]
[ 0.097304] pci 0000:00:1e.0: bridge 32bit mmio pref: [0xe8000000-0xefffffff]
[ 0.097345] pci_bus 0000:00: on NUMA node 0
[ 0.097351] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.097410] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[ 0.097442] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.101497] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.101709] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.101918] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.102125] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.102313] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.102501] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.102693] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[ 0.102902] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.103171] SCSI subsystem initialized
[ 0.103247] libata version 3.00 loaded.
[ 0.103348] usbcore: registered new interface driver usbfs
[ 0.103380] usbcore: registered new interface driver hub
[ 0.103411] usbcore: registered new device driver usb
[ 0.103574] ACPI: WMI: Mapper loaded
[ 0.103577] PCI: Using ACPI for IRQ routing
[ 0.103896] Bluetooth: Core ver 2.15
[ 0.103928] NET: Registered protocol family 31
[ 0.103931] Bluetooth: HCI device and connection manager initialized
[ 0.103935] Bluetooth: HCI socket layer initialized
[ 0.103938] NetLabel: Initializing
[ 0.103940] NetLabel: domain hash size = 128
[ 0.103942] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.103960] NetLabel: unlabeled traffic allowed by default
[ 0.106413] pnp: PnP ACPI init
[ 0.106452] ACPI: bus type pnp registered
[ 0.111817] pnp: PnP ACPI: found 13 devices
[ 0.111821] ACPI: ACPI bus type pnp unregistered
[ 0.111827] PnPBIOS: Disabled by ACPI PNP
[ 0.111844] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.111849] system 00:00: iomem range 0xc0000-0xc3fff could not be reserved
[ 0.111853] system 00:00: iomem range 0xc4000-0xc7fff could not be reserved
[ 0.111857] system 00:00: iomem range 0xc8000-0xcbfff could not be reserved
[ 0.111861] system 00:00: iomem range 0xcc000-0xcffff could not be reserved
[ 0.111865] system 00:00: iomem range 0xd0000-0xd3fff could not be reserved
[ 0.111869] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[ 0.111873] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.111877] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.111881] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.111885] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.111889] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.111893] system 00:00: iomem range 0x100000-0x3fffffff could not be reserved
[ 0.111898] system 00:00: iomem range 0xfec00000-0xffffffff could not be reserved
[ 0.111908] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.111912] system 00:02: ioport range 0x1180-0x11bf has been reserved
[ 0.111916] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.111919] system 00:02: ioport range 0x1600-0x162f has been reserved
[ 0.111923] system 00:02: ioport range 0x1632-0x167f has been reserved
[ 0.111927] system 00:02: ioport range 0x1630-0x1631 has been reserved
[ 0.146660] AppArmor: AppArmor Filesystem Enabled
[ 0.146700] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.146704] pci 0000:00:01.0: IO window: 0x3000-0x3fff
[ 0.146709] pci 0000:00:01.0: MEM window: 0xc0100000-0xc01fffff
[ 0.146714] pci 0000:00:01.0: PREFETCH window: 0xe0000000-0xe7ffffff
[ 0.146723] pci 0000:02:00.0: CardBus bridge, secondary bus 0000:03
[ 0.146727] pci 0000:02:00.0: IO window: 0x004000-0x0040ff
[ 0.146732] pci 0000:02:00.0: IO window: 0x004400-0x0044ff
[ 0.146738] pci 0000:02:00.0: PREFETCH window: 0xe8000000-0xebffffff
[ 0.146743] pci 0000:02:00.0: MEM window: 0xc4000000-0xc7ffffff
[ 0.146749] pci 0000:02:00.1: CardBus bridge, secondary bus 0000:07
[ 0.146752] pci 0000:02:00.1: IO window: 0x004800-0x0048ff
[ 0.146758] pci 0000:02:00.1: IO window: 0x004c00-0x004cff
[ 0.146763] pci 0000:02:00.1: PREFETCH window: 0xec000000-0xefffffff
[ 0.146769] pci 0000:02:00.1: MEM window: 0xc8000000-0xcbffffff
[ 0.146774] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:02
[ 0.146779] pci 0000:00:1e.0: IO window: 0x4000-0x8fff
[ 0.146785] pci 0000:00:1e.0: MEM window: 0xc0200000-0xcfffffff
[ 0.146790] pci 0000:00:1e.0: PREFETCH window: 0xe8000000-0xefffffff
[ 0.146807] pci 0000:00:1e.0: setting latency timer to 64
[ 0.147190] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.147194] PCI: setting IRQ 11 as level-triggered
[ 0.147200] pci 0000:02:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.147556] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.147561] pci 0000:02:00.1: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.147571] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.147575] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.147579] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.147582] pci_bus 0000:01: resource 1 mem: [0xc0100000-0xc01fffff]
[ 0.147586] pci_bus 0000:01: resource 2 pref mem [0xe0000000-0xe7ffffff]
[ 0.147590] pci_bus 0000:02: resource 0 io: [0x4000-0x8fff]
[ 0.147593] pci_bus 0000:02: resource 1 mem: [0xc0200000-0xcfffffff]
[ 0.147597] pci_bus 0000:02: resource 2 pref mem [0xe8000000-0xefffffff]
[ 0.147600] pci_bus 0000:02: resource 3 io: [0x00-0xffff]
[ 0.147604] pci_bus 0000:02: resource 4 mem: [0x000000-0xffffffff]
[ 0.147608] pci_bus 0000:03: resource 0 io: [0x4000-0x40ff]
[ 0.147611] pci_bus 0000:03: resource 1 io: [0x4400-0x44ff]
[ 0.147614] pci_bus 0000:03: resource 2 pref mem [0xe8000000-0xebffffff]
[ 0.147618] pci_bus 0000:03: resource 3 mem: [0xc4000000-0xc7ffffff]
[ 0.147622] pci_bus 0000:07: resource 0 io: [0x4800-0x48ff]
[ 0.147625] pci_bus 0000:07: resource 1 io: [0x4c00-0x4cff]
[ 0.147629] pci_bus 0000:07: resource 2 pref mem [0xec000000-0xefffffff]
[ 0.147632] pci_bus 0000:07: resource 3 mem: [0xc8000000-0xcbffffff]
[ 0.147689] NET: Registered protocol family 2
[ 0.147832] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.148349] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.150201] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.151342] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.151346] TCP reno registered
[ 0.151528] NET: Registered protocol family 1
[ 0.151643] Trying to unpack rootfs image as initramfs...
[ 0.424464] Freeing initrd memory: 7473k freed
[ 0.436661] Simple Boot Flag at 0x35 set to 0x1
[ 0.436774] cpufreq-nforce2: No nForce2 chipset.
[ 0.436830] Scanning for low memory corruption every 60 seconds
[ 0.436996] audit: initializing netlink socket (disabled)
[ 0.437040] type=2000 audit(1269892172.436:1): initialized
[ 0.448571] highmem bounce pool size: 64 pages
[ 0.448579] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.450620] VFS: Disk quotas dquot_6.5.2
[ 0.450703] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.451523] fuse init (API version 7.12)
[ 0.451639] msgmni has been set to 1732
[ 0.451893] alg: No test for stdrng (krng)
[ 0.451908] io scheduler noop registered
[ 0.451911] io scheduler anticipatory registered
[ 0.451913] io scheduler deadline registered
[ 0.451981] io scheduler cfq registered (default)
[ 0.452095] pci 0000:01:00.0: Boot video device
[ 0.452224] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.452254] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.452760] ACPI: AC Adapter [AC] (on-line)
[ 0.452853] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 0.452858] ACPI: Power Button [PWRF]
[ 0.452918] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.453371] ACPI: Lid Switch [LID]
[ 0.453436] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 0.453442] ACPI: Sleep Button [SLPB]
[ 0.455838] Marking TSC unstable due to TSC halts in idle
[ 0.455860] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 0.455890] processor LNXCPU:00: registered as cooling_device0
[ 0.455895] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 0.456024] Switched to high resolution mode on CPU 0
[ 0.462185] thermal LNXTHERM:01: registered as thermal_zone0
[ 0.462195] ACPI: Thermal Zone [THM0] (54 C)
[ 0.462251] isapnp: Scanning for PnP cards...
[ 0.815741] isapnp: No Plug & Play device found
[ 0.817226] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.818229] serial 00:0a: activated
[ 0.818324] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
[ 0.818445] serial 0000:00:1f.6: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 0.818453] serial 0000:00:1f.6: PCI INT B disabled
[ 0.819626] brd: module loaded
[ 0.820294] loop: module loaded
[ 0.820391] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.820532] ata_piix 0000:00:1f.1: version 2.13
[ 0.820542] ata_piix 0000:00:1f.1: enabling device (0005 -> 0007)
[ 0.820924] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[ 0.820929] ata_piix 0000:00:1f.1: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.820981] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.821075] scsi0 : ata_piix
[ 0.821253] scsi1 : ata_piix
[ 0.822310] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1860 irq 14
[ 0.822314] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1868 irq 15
[ 0.823421] Fixed MDIO Bus: probed
[ 0.823478] PPP generic driver version 2.4.2
[ 0.823593] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.854359] ACPI: Battery Slot [BAT0] (battery present)
[ 0.859299] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 0.859660] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
[ 0.859665] ehci_hcd 0000:00:1d.7: PCI INT D -> Link[LNKH] -> GSI 11 (level, low) -> IRQ 11
[ 0.859685] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.859690] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.859735] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.863642] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.863649] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.863659] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
[ 0.876038] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.876149] usb usb1: configuration #1 chosen from 1 choice
[ 0.876186] hub 1-0:1.0: USB hub found
[ 0.876197] hub 1-0:1.0: 6 ports detected
[ 0.876267] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.876295] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.876702] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 0.876710] uhci_hcd 0000:00:1d.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 0.876717] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.876721] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.876763] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.876786] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
[ 0.876898] usb usb2: configuration #1 chosen from 1 choice
[ 0.876933] hub 2-0:1.0: USB hub found
[ 0.876942] hub 2-0:1.0: 2 ports detected
[ 0.877606] uhci_hcd 0000:00:1d.1: power state changed by ACPI to D0
[ 0.877964] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 0.877969] uhci_hcd 0000:00:1d.1: PCI INT B -> Link[LNKD] -> GSI 11 (level, low) -> IRQ 11
[ 0.877976] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.877980] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.878018] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.878040] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
[ 0.878140] usb usb3: configuration #1 chosen from 1 choice
[ 0.878172] hub 3-0:1.0: USB hub found
[ 0.878180] hub 3-0:1.0: 2 ports detected
[ 0.878231] uhci_hcd 0000:00:1d.2: PCI INT C -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 0.878238] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.878242] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.878276] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.878298] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
[ 0.878407] usb usb4: configuration #1 chosen from 1 choice
[ 0.878442] hub 4-0:1.0: USB hub found
[ 0.878451] hub 4-0:1.0: 2 ports detected
[ 0.878563] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 0.884637] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.884644] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.884716] mice: PS/2 mouse device common for all mice
[ 0.884843] rtc_cmos 00:06: RTC can wake from S4
[ 0.884883] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.884904] rtc0: alarms up to one month, y3k, 114 bytes nvram
[ 0.885063] device-mapper: uevent: version 1.0.3
[ 0.885185] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.885285] device-mapper: multipath: version 1.1.0 loaded
[ 0.885289] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.885453] EISA: Probing bus 0 at eisa.0
[ 0.885459] Cannot allocate resource for EISA slot 1
[ 0.885463] Cannot allocate resource for EISA slot 2
[ 0.885466] Cannot allocate resource for EISA slot 3
[ 0.885468] Cannot allocate resource for EISA slot 4
[ 0.885471] Cannot allocate resource for EISA slot 5
[ 0.885474] Cannot allocate resource for EISA slot 6
[ 0.885476] Cannot allocate resource for EISA slot 7
[ 0.885479] Cannot allocate resource for EISA slot 8
[ 0.885482] EISA: Detected 0 cards.
[ 0.885580] cpuidle: using governor ladder
[ 0.885665] cpuidle: using governor menu
[ 0.886386] TCP cubic registered
[ 0.886617] NET: Registered protocol family 10
[ 0.887215] lo: Disabled Privacy Extensions
[ 0.887660] NET: Registered protocol family 17
[ 0.887681] Bluetooth: L2CAP ver 2.13
[ 0.887683] Bluetooth: L2CAP socket layer initialized
[ 0.887687] Bluetooth: SCO (Voice Link) ver 0.6
[ 0.887689] Bluetooth: SCO socket layer initialized
[ 0.887735] Bluetooth: RFCOMM TTY layer initialized
[ 0.887739] Bluetooth: RFCOMM socket layer initialized
[ 0.887742] Bluetooth: RFCOMM ver 1.11
[ 0.887914] P-state transition latency capped at 20 uS
[ 0.888236] Using IPI No-Shortcut mode
[ 0.888318] PM: Resume from disk failed.
[ 0.888333] registered taskstats version 1
[ 0.888485] Magic number: 2:963:850
[ 0.888600] rtc_cmos 00:06: setting system clock to 2010-03-29 19:49:33 UTC (1269892173)
[ 0.888604] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.888617] EDD information not available.
[ 0.890644] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.984338] ata2.01: NODEV after polling detection
[ 0.992958] ata1.00: HPA unlocked: 71973874 -> 78140160, native 78140160
[ 0.992965] ata1.00: ATA-5: IC25N040ATCS05-0, CS4OA61A, max UDMA/100
[ 0.992969] ata1.00: 78140160 sectors, multi 16: LBA
[ 0.993162] ata2.00: ATAPI: UJDA745 DVD/CDRW, 1.02, max UDMA/33
[ 1.008824] ata2.00: configured for UDMA/33
[ 1.008968] ata1.00: configured for UDMA/100
[ 1.009131] scsi 0:0:0:0: Direct-Access ATA IC25N040ATCS05-0 CS4O PQ: 0 ANSI: 5
[ 1.009285] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.009332] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.009388] sd 0:0:0:0: [sda] Write Protect is off
[ 1.009392] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.009421] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.009594] sda:
[ 1.012726] scsi 1:0:0:0: CD-ROM MATSHITA UJDA745 DVD/CDRW 1.02 PQ: 0 ANSI: 5
[ 1.019664] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.019669] Uniform CD-ROM driver Revision: 3.20
[ 1.019773] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.019826] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.027929] sda1 sda2 < sda5 >
[ 1.050850] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.050871] Freeing unused kernel memory: 540k freed
[ 1.051331] Write protecting the kernel text: 4580k
[ 1.051379] Write protecting the kernel read-only data: 1840k
[ 1.285038] Linux agpgart interface v0.103
[ 1.306532] agpgart-intel 0000:00:00.0: Intel 855PM Chipset
[ 1.363162] Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
[ 1.363168] Copyright (c) 1999-2006 Intel Corporation.
[ 1.363248] e1000 0000:02:01.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 1.442537] usb 3-2: new low speed USB device using uhci_hcd and address 2
[ 1.454374] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.681510] e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:11:25:b0:0d:3e
[ 1.692615] [drm] Initialized drm 1.1.0 20060810
[ 1.732144] [drm] radeon default to kernel modesetting DISABLED.
[ 1.732329] pci 0000:01:00.0: power state changed by ACPI to D0
[ 1.732343] pci 0000:01:00.0: PCI INT A -> Link[LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 1.733139] [drm] Initialized radeon 1.31.0 20080528 for 0000:01:00.0 on minor 0
[ 1.737429] Floppy drive(s): fd0 is 1.44M
[ 1.746344] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:03/device:04/input/input5
[ 1.746404] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 1.755079] FDC 0 is a National Semiconductor PC87306
[ 1.769928] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
[ 1.805338] usb 3-2: configuration #1 chosen from 1 choice
[ 1.819089] usbcore: registered new interface driver hiddev
[ 1.832595] input: USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input6
[ 1.832709] generic-usb 0003:04B3:310C.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.1-2/input0
[ 1.832729] usbcore: registered new interface driver usbhid
[ 1.832738] usbhid: v2.6:USB HID core driver
[ 2.658292] PM: Starting manual resume from disk
[ 2.658297] PM: Resume from partition 8:5
[ 2.658300] PM: Checking hibernation image.
[ 2.658452] PM: Resume from disk failed.
[ 2.686084] EXT4-fs (sda1): barriers enabled
[ 2.710244] kjournald2 starting: pid 352, dev sda1:8, commit interval 5 seconds
[ 2.710285] EXT4-fs (sda1): delayed allocation enabled
[ 2.710289] EXT4-fs: file extents enabled
[ 2.716205] EXT4-fs: mballoc enabled
[ 2.716226] EXT4-fs (sda1): mounted filesystem with ordered data mode
[ 3.607173] type=1505 audit(1269892176.215:2): operation="profile_load" pid=376 name=/usr/share/gdm/guest-session/Xsession
[ 3.631082] type=1505 audit(1269892176.239:3): operation="profile_load" pid=377 name=/sbin/dhclient3
[ 3.631872] type=1505 audit(1269892176.239:4): operation="profile_load" pid=377 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 3.632336] type=1505 audit(1269892176.243:5): operation="profile_load" pid=377 name=/usr/lib/connman/scripts/dhclient-script
[ 3.717664] type=1505 audit(1269892176.327:6): operation="profile_load" pid=378 name=/usr/bin/evince
[ 3.731230] type=1505 audit(1269892176.339:7): operation="profile_load" pid=378 name=/usr/bin/evince-previewer
[ 3.739106] type=1505 audit(1269892176.347:8): operation="profile_load" pid=378 name=/usr/bin/evince-thumbnailer
[ 3.758308] type=1505 audit(1269892176.367:9): operation="profile_load" pid=380 name=/usr/lib/cups/backend/cups-pdf
[ 20.438489] udev: starting version 147
[ 20.476345] Adding 1646620k swap on /dev/sda5. Priority:-1 extents:1 across:1646620k
[ 20.615712] intel_rng: FWH not detected
[ 20.688929] lp: driver loaded but no devices found
[ 20.876931] EXT4-fs (sda1): internal journal on sda1:8
[ 21.025998] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.095979] irda_init()
[ 21.096041] NET: Registered protocol family 23
[ 21.102392] nsc-ircc 00:0c: activated
[ 21.102398] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1.
[ 21.102565] nsc-ircc, chip->init
[ 21.102574] nsc-ircc, Found chip at base=0x02e
[ 21.102598] nsc-ircc, driver loaded (Dag Brattli)
[ 21.103499] IrDA: Registered device irda0
[ 21.103502] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500
[ 21.121789] parport_pc 00:0b: reported by Plug and Play ACPI
[ 21.121834] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
[ 21.151021] cfg80211: Calling CRDA to update world regulatory domain
[ 21.206029] lp0: using parport0 (interrupt-driven).
[ 21.221953] ath5k 0000:02:02.0: PCI INT A -> Link[LNKC] -> GSI 11 (level, low) -> IRQ 11
[ 21.222027] ath5k 0000:02:02.0: registered as 'phy0'
[ 21.429761] Non-volatile memory driver v1.3
[ 21.433620] cfg80211: World regulatory domain updated:
[ 21.433625] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 21.433629] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.433633] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.433637] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 21.433640] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.433644] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 21.444562] thinkpad_acpi: ThinkPad ACPI Extras v0.23
[ 21.444566] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 21.444569] thinkpad_acpi: ThinkPad BIOS 1RETDRWW (3.23 ), EC 1RHT71WW-3.04
[ 21.444572] thinkpad_acpi: IBM ThinkPad T40p, model 2373G1G
[ 21.466477] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.503986] ppdev: user-space parallel port driver
[ 21.505032] Registered led device: tpacpi::thinklight
[ 21.505088] Registered led device: tpacpi::power
[ 21.505108] Registered led device: tpacpi::standby
[ 21.526134] ath: EEPROM regdomain: 0x61
[ 21.526140] ath: EEPROM indicates we should expect a direct regpair map
[ 21.526146] ath: Country alpha2 being used: 00
[ 21.526148] ath: Regpair used: 0x61
[ 21.534213] input: ThinkPad Extra Buttons as /devices/virtual/input/input7
[ 21.640625] Intel ICH 0000:00:1f.5: PCI INT B -> Link[LNKB] -> GSI 11 (level, low) -> IRQ 11
[ 21.640684] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 21.752101] phy0: Selected rate control algorithm 'minstrel'
[ 21.753144] Registered led device: ath5k-phy0::rx
[ 21.753165] Registered led device: ath5k-phy0::tx
[ 21.753170] ath5k phy0: Atheros AR5211 chip found (MAC: 0x42, PHY: 0x30)
[ 21.753174] ath5k phy0: RF5111 5GHz radio found (0x17)
[ 21.753177] ath5k phy0: RF2111 2GHz radio found (0x23)
[ 21.755606] yenta_cardbus 0000:02:00.0: CardBus bridge found [1014:0512]
[ 21.755629] yenta_cardbus 0000:02:00.0: Using INTVAL to route CSC interrupts to PCI
[ 21.755633] yenta_cardbus 0000:02:00.0: Routing CardBus interrupts to PCI
[ 21.755639] yenta_cardbus 0000:02:00.0: TI: mfunc 0x01d21022, devctl 0x64
[ 21.984512] yenta_cardbus 0000:02:00.0: ISA IRQ mask 0x0430, PCI irq 11
[ 21.984518] yenta_cardbus 0000:02:00.0: Socket status: 30000006
[ 21.984529] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 21.984534] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x4000-0x8fff: clean.
[ 21.985929] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 21.985933] yenta_cardbus 0000:02:00.0: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 22.011525] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.016434] yenta_cardbus 0000:02:00.1: CardBus bridge found [1014:0512]
[ 22.016457] yenta_cardbus 0000:02:00.1: Using INTVAL to route CSC interrupts to PCI
[ 22.016461] yenta_cardbus 0000:02:00.1: Routing CardBus interrupts to PCI
[ 22.016467] yenta_cardbus 0000:02:00.1: TI: mfunc 0x01d21022, devctl 0x64
[ 22.227075] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0
[ 22.227085] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 22.236521] __ratelimit: 6 callbacks suppressed
[ 22.236526] type=1505 audit(1269892194.847:12): operation="profile_replace" pid=893 name=/usr/share/gdm/guest-session/Xsession
[ 22.239869] type=1505 audit(1269892194.847:13): operation="profile_replace" pid=895 name=/sbin/dhclient3
[ 22.240758] type=1505 audit(1269892194.851:14): operation="profile_replace" pid=895 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 22.241195] type=1505 audit(1269892194.851:15): operation="profile_replace" pid=895 name=/usr/lib/connman/scripts/dhclient-script
[ 22.251111] yenta_cardbus 0000:02:00.1: ISA IRQ mask 0x0430, PCI irq 11
[ 22.251118] yenta_cardbus 0000:02:00.1: Socket status: 30000006
[ 22.251131] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
[ 22.251137] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x4000-0x8fff: clean.
[ 22.252562] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
[ 22.252567] yenta_cardbus 0000:02:00.1: pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
[ 22.281982] type=1505 audit(1269892194.891:16): operation="profile_replace" pid=899 name=/usr/bin/evince
[ 22.300307] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 22.319730] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.341419] type=1505 audit(1269892194.951:17): operation="profile_replace" pid=899 name=/usr/bin/evince-previewer
[ 22.365639] type=1505 audit(1269892194.975:18): operation="profile_replace" pid=899 name=/usr/bin/evince-thumbnailer
[ 22.402143] type=1505 audit(1269892195.011:19): operation="profile_replace" pid=914 name=/usr/lib/cups/backend/cups-pdf
[ 22.403084] type=1505 audit(1269892195.011:20): operation="profile_replace" pid=914 name=/usr/sbin/cupsd
[ 22.406970] type=1505 audit(1269892195.015:21): operation="profile_replace" pid=915 name=/usr/sbin/tcpdump
[ 22.630100] intel8x0_measure_ac97_clock: measured 99939 usecs (4807 samples)
[ 22.630106] intel8x0: clocking to 48000
[ 22.872910] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x100-0x3af: clean.
[ 22.873914] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 22.874350] pcmcia_socket pcmcia_socket1: cs: IO port probe 0x820-0x8ff: clean.
[ 22.874721] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xc00-0xcf7: clean.
[ 22.875259] pcmcia_socket pcmcia_socket1: cs: IO port probe 0xa00-0xaff: clean.
[ 22.885817] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean.
[ 22.886829] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 22.887265] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean.
[ 22.887636] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean.
[ 22.888199] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
[ 24.035661] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 24.035683] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 24.035723] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[ 24.288168] [drm] Setting GART location based on new memory map
[ 24.288180] [drm] Loading R200 Microcode
[ 24.288236] [drm] writeback test succeeded in 2 usecs
[ 26.240165] psmouse serio2: ID: 10 00 64
[ 32.276060] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 32.764209] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input9
[ 63.883336] wlan0: direct probe to AP 00:0f:66:36:b8:b9 try 1
[ 64.080047] wlan0: direct probe to AP 00:0f:66:36:b8:b9 try 2
[ 64.280046] wlan0: direct probe to AP 00:0f:66:36:b8:b9 try 3
[ 64.480045] wlan0: direct probe to AP 00:0f:66:36:b8:b9 timed out
[ 76.383324] wlan0: direct probe to AP 00:0f:66:36:b8:b9 try 1
[ 76.580045] wlan0: direct probe to AP 00:0f:66:36:b8:b9 try 2
[ 76.780046] wlan0: direct probe to AP 00:0f:66:36:b8:b9 try 3
[ 76.980041] wlan0: direct probe to AP 00:0f:66:36:b8:b9 timed out
[ 85.144049] Clocksource tsc unstable (delta = -298302123 ns)
[ 99.798201] thinkpad_acpi: deprecated sysfs attribute: access by process with PID 1740
[ 99.798207] thinkpad_acpi: WARNING: sysfs attribute hotkey_enable is deprecated and will be removed. Hotkey reporting is always enabled
[ 99.799049] thinkpad_acpi: deprecated sysfs attribute: access by process with PID 1740
[ 99.799053] thinkpad_acpi: WARNING: sysfs attribute bluetooth_enable is deprecated and will be removed. Please switch to generic rfkill before year 2010
[ 101.299913] wlan0: direct probe to AP 00:0f:66:36:b8:b9 try 1
[ 101.496087] wlan0: direct probe to AP 00:0f:66:36:b8:b9 try 2
[ 101.696065] wlan0: direct probe to AP 00:0f:66:36:b8:b9 try 3
[ 101.896077] wlan0: direct probe to AP 00:0f:66:36:b8:b9 timed out
[ 113.737064] wlan0: direct probe to AP 00:0f:66:36:b8:b9 try 1
[ 113.936074] wlan0: direct probe to AP 00:0f:66:36:b8:b9 try 2
[ 114.136075] wlan0: direct probe to AP 00:0f:66:36:b8:b9 try 3
[ 114.340778] wlan0: direct probe to AP 00:0f:66:36:b8:b9 timed out
[ 146.117667] wlan0: direct probe to AP 00:0f:66:45:fe:9c try 1
[ 146.318076] wlan0: direct probe to AP 00:0f:66:45:fe:9c try 2
[ 146.518605] wlan0: direct probe to AP 00:0f:66:45:fe:9c try 3
[ 146.718553] wlan0: direct probe to AP 00:0f:66:45:fe:9c timed out
[ 159.176400] e1000: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 159.176817] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 161.183092] wlan0: direct probe to AP 00:0f:66:45:fe:9c try 1
[ 161.380074] wlan0: direct probe to AP 00:0f:66:45:fe:9c try 2
[ 161.588224] wlan0: direct probe to AP 00:0f:66:45:fe:9c try 3
[ 161.792199] wlan0: direct probe to AP 00:0f:66:45:fe:9c timed out
[ 169.200028] eth0: no IPv6 routers present
[ 173.652342] wlan0: direct probe to AP 00:0f:66:45:fe:9c try 1
[ 173.852042] wlan0: direct probe to AP 00:0f:66:45:fe:9c try 2
[ 174.052052] wlan0: direct probe to AP 00:0f:66:45:fe:9c try 3
[ 174.256045] wlan0: direct probe to AP 00:0f:66:45:fe:9c timed out
[ 186.047941] wlan0: direct probe to AP 00:0f:66:45:fe:9c try 1
[ 186.244058] wlan0: direct probe to AP 00:0f:66:45:fe:9c try 2
[ 186.444055] wlan0: direct probe to AP 00:0f:66:45:fe:9c try 3
[ 186.652041] wlan0: direct probe to AP 00:0f:66:45:fe:9c timed out
[ 255.060127] cfg80211: Found new beacon on frequency: 5240 MHz (Ch 48) on phy0

END