El_Matthews
March 14th, 2010, 06:28 PM
In the past I had my screenlets configured to show the speed of all my fans in my PC.
Now for some strange reason this isn't possible anymore. When I configure a the SensorsScreenlet (screenlet supposed to display info from lm-sensors) I only get the following possibilities:
CPU0, CPU1 , CPU2, RAM , SWAP, /
Where are all the other possibilities gone or why don't I see them anymore?
When I check lm-sensors with the command sensors I still got the info available:
w83627dhg-isa-0290
Adapter: ISA adapter
VCore: +1.12 V (min = +0.00 V, max = +1.74 V)
in1: +11.51 V (min = +0.00 V, max = +2.53 V) ALARM
AVCC: +3.28 V (min = +1.25 V, max = +2.05 V) ALARM
3VCC: +3.28 V (min = +3.65 V, max = +0.51 V) ALARM
in4: +1.41 V (min = +1.02 V, max = +0.00 V) ALARM
in5: +1.68 V (min = +0.13 V, max = +0.00 V) ALARM
in6: +4.53 V (min = +0.97 V, max = +0.59 V) ALARM
VSB: +3.28 V (min = +0.00 V, max = +1.02 V) ALARM
VBAT: +2.08 V (min = +2.05 V, max = +0.83 V) ALARM
Case Fan: 1854 RPM (min = 2596 RPM, div = 8) ALARM
CPU Fan: 1424 RPM (min = 337500 RPM, div = 4) ALARM
Aux Fan: 2327 RPM (min = 6490 RPM, div = 4) ALARM
fan5: 2343 RPM (min = 2163 RPM, div = 8)
Sys Temp: +27.0°C (high = +64.0°C, hyst = +83.0°C) sensor = thermistor
CPU Temp: +27.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
AUX Temp: +124.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
cpu0_vid: +1.950 V
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +32.0°C (high = +78.0°C, crit = +100.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +32.0°C (high = +78.0°C, crit = +100.0°C)
Anybody an idea or a tip?
Now for some strange reason this isn't possible anymore. When I configure a the SensorsScreenlet (screenlet supposed to display info from lm-sensors) I only get the following possibilities:
CPU0, CPU1 , CPU2, RAM , SWAP, /
Where are all the other possibilities gone or why don't I see them anymore?
When I check lm-sensors with the command sensors I still got the info available:
w83627dhg-isa-0290
Adapter: ISA adapter
VCore: +1.12 V (min = +0.00 V, max = +1.74 V)
in1: +11.51 V (min = +0.00 V, max = +2.53 V) ALARM
AVCC: +3.28 V (min = +1.25 V, max = +2.05 V) ALARM
3VCC: +3.28 V (min = +3.65 V, max = +0.51 V) ALARM
in4: +1.41 V (min = +1.02 V, max = +0.00 V) ALARM
in5: +1.68 V (min = +0.13 V, max = +0.00 V) ALARM
in6: +4.53 V (min = +0.97 V, max = +0.59 V) ALARM
VSB: +3.28 V (min = +0.00 V, max = +1.02 V) ALARM
VBAT: +2.08 V (min = +2.05 V, max = +0.83 V) ALARM
Case Fan: 1854 RPM (min = 2596 RPM, div = 8) ALARM
CPU Fan: 1424 RPM (min = 337500 RPM, div = 4) ALARM
Aux Fan: 2327 RPM (min = 6490 RPM, div = 4) ALARM
fan5: 2343 RPM (min = 2163 RPM, div = 8)
Sys Temp: +27.0°C (high = +64.0°C, hyst = +83.0°C) sensor = thermistor
CPU Temp: +27.0°C (high = +80.0°C, hyst = +75.0°C) sensor = diode
AUX Temp: +124.5°C (high = +80.0°C, hyst = +75.0°C) ALARM sensor = thermistor
cpu0_vid: +1.950 V
coretemp-isa-0000
Adapter: ISA adapter
Core 0: +32.0°C (high = +78.0°C, crit = +100.0°C)
coretemp-isa-0001
Adapter: ISA adapter
Core 1: +32.0°C (high = +78.0°C, crit = +100.0°C)
Anybody an idea or a tip?