joshuakimba
March 13th, 2010, 03:20 AM
Ok, I have loaded all the files, and I have run all the commands several times from the previous thread that instructs how to get linux to recognize the modem, but when I run the flipflop command this is what I get:
COPYING flipflop.sh usb_modeswitch-0.9.7
cricket_flip_amd64.deb flipflop.sh~ usb_modeswitch.c
cricket_flip_i386.deb Makefile usb_modeswitch.conf
Cricket_Mode_Switch.tar.gz README usb_modeswitch.conf~
cricketum185c.sh usb_modeswitch usb_modeswitch.h
joshua@joshua-laptop:~/cricket/usb$ ^C
joshua@joshua-laptop:~/cricket/usb$ cd usb_modeswitch-0.9.7
joshua@joshua-laptop:~/cricket/usb/usb_modeswitch-0.9.7$ sudo ./flipflop.sh
* usb_modeswitch: tool for controlling "flip flop" mode USB devices
* Version 0.9.7 (C) Josua Dietze 2009
* Works with libusb 0.1.12 and probably other versions
Looking for target devices ...
Found devices in target mode or class (1)
Looking for default devices ...
Found default devices (1)
Found a default device NOT in target class mode
Prepare switching, accessing device 002 on bus 003 ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Setting up communication with interface 0 ...
Trying to send the message to endpoint 0x08 ...
OK, message successfully sent
-> Run lsusb to note any changes. Bye
* usb_modeswitch: tool for controlling "flip flop" mode USB devices
* Version 0.9.7 (C) Josua Dietze 2009
* Works with libusb 0.1.12 and probably other versions
Looking for default devices ...
Found default devices (1)
Prepare switching, accessing device 003 on bus 003 ...
Resetting usb device .
OK, device was reset
-> Run lsusb to note any changes. Bye
My modem connects and then disconnects each time and then linux doesn't recognize it.
COPYING flipflop.sh usb_modeswitch-0.9.7
cricket_flip_amd64.deb flipflop.sh~ usb_modeswitch.c
cricket_flip_i386.deb Makefile usb_modeswitch.conf
Cricket_Mode_Switch.tar.gz README usb_modeswitch.conf~
cricketum185c.sh usb_modeswitch usb_modeswitch.h
joshua@joshua-laptop:~/cricket/usb$ ^C
joshua@joshua-laptop:~/cricket/usb$ cd usb_modeswitch-0.9.7
joshua@joshua-laptop:~/cricket/usb/usb_modeswitch-0.9.7$ sudo ./flipflop.sh
* usb_modeswitch: tool for controlling "flip flop" mode USB devices
* Version 0.9.7 (C) Josua Dietze 2009
* Works with libusb 0.1.12 and probably other versions
Looking for target devices ...
Found devices in target mode or class (1)
Looking for default devices ...
Found default devices (1)
Found a default device NOT in target class mode
Prepare switching, accessing device 002 on bus 003 ...
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Setting up communication with interface 0 ...
Trying to send the message to endpoint 0x08 ...
OK, message successfully sent
-> Run lsusb to note any changes. Bye
* usb_modeswitch: tool for controlling "flip flop" mode USB devices
* Version 0.9.7 (C) Josua Dietze 2009
* Works with libusb 0.1.12 and probably other versions
Looking for default devices ...
Found default devices (1)
Prepare switching, accessing device 003 on bus 003 ...
Resetting usb device .
OK, device was reset
-> Run lsusb to note any changes. Bye
My modem connects and then disconnects each time and then linux doesn't recognize it.