Dextrocardic
March 7th, 2010, 02:58 AM
I have been trying ubantu 9.10 via dual boot (with windows XP) for a while now. Today I decided to wipe out windows and install ubantu only. After I completed the install I get GRUB prompt and I cannot type anything. So I booted from CD again and opened ubantu from disk. ran the boot_info_script as mentioned on other posts here and here is the results. Please help...
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks at sector 2928391 of
the same hard drive for core.img, core.img is at this location on /dev/sdb
and looks for (UUID=e76d4181-57e6-4524-93fb-ba5fee3b167d)/boot/grub.
=> Windows is installed in the MBR of /dev/sdb
=> Windows is installed in the MBR of /dev/sdc
=> Windows is installed in the MBR of /dev/sdd
sdb1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /ubuntu/winboot/wubildr.mbr /ubuntu/winboot/wubildr
/ubuntu/disks/root.disk /ubuntu/disks/swap.disk
sdc1/Wubi: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab
sdc2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdd1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x00000000
Partition Boot Start End Size Id System
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xea1aa9c7
Partition Boot Start End Size Id System
/dev/sdb1 63 74,862,899 74,862,837 83 Linux
/dev/sdb2 74,862,900 78,156,224 3,293,325 5 Extended
/dev/sdb5 74,862,963 78,156,224 3,293,262 82 Linux swap / Solaris
Drive: sdc ___________________ __________________________________________________ ___
Disk /dev/sdc: 20.0 GB, 20020396032 bytes
240 heads, 63 sectors/track, 2586 cylinders, total 39102336 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xcc37cc37
Partition Boot Start End Size Id System
/dev/sdc1 * 63 39,085,199 39,085,137 7 HPFS/NTFS
/dev/sdc2 39,085,200 39,100,319 15,120 f W95 Ext d (LBA)
Empty Partition
Drive: sdd ___________________ __________________________________________________ ___
Disk /dev/sdd: 1006 MB, 1006632960 bytes
65 heads, 32 sectors/track, 945 cylinders, total 1966080 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xc3072e18
Partition Boot Start End Size Id System
/dev/sdd1 * 32 1,966,079 1,966,048 6 FAT16
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 a1d76960-3dd1-4b77-bc8d-5271fcb3a3fc ext4
/dev/sdb1 e76d4181-57e6-4524-93fb-ba5fee3b167d ext4
/dev/sdb5 ad7b9ac1-595e-448d-8e33-8047aa3d3433 swap
/dev/sdc1 1E6C79396C790CB1 ntfs System
/dev/sdd1 C57F-37A6 vfat UDISK
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (rw)
/dev/loop0 /rofs squashfs (rw)
/dev/sdd1 /media/UDISK vfat (rw,nosuid,nodev,uhelper=devkit,uid=999,gid=999,sh ortname=mixed,dmask=0077,utf8=1,flush)
=========================== sdb1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd1,1)
search --no-floppy --fs-uuid --set e76d4181-57e6-4524-93fb-ba5fee3b167d
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd1,1)
search --no-floppy --fs-uuid --set e76d4181-57e6-4524-93fb-ba5fee3b167d
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=e76d4181-57e6-4524-93fb-ba5fee3b167d ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd1,1)
search --no-floppy --fs-uuid --set e76d4181-57e6-4524-93fb-ba5fee3b167d
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=e76d4181-57e6-4524-93fb-ba5fee3b167d ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sdb1 during installation
UUID=e76d4181-57e6-4524-93fb-ba5fee3b167d / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb5 during installation
UUID=ad7b9ac1-595e-448d-8e33-8047aa3d3433 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sdb1: Location of files loaded by Grub: ===================
1.4GB: boot/grub/core.img
1.4GB: boot/grub/grub.cfg
1.5GB: boot/initrd.img-2.6.31-14-generic
1.5GB: boot/vmlinuz-2.6.31-14-generic
1.5GB: initrd.img
1.5GB: vmlinuz
======================== sdc1/Wubi/boot/grub/grub.cfg: ========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
insmod ntfs
set root=(hd2,1)
search --no-floppy --fs-uuid --set 1e6c79396c790cb1
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-14-generic root=/dev/sdc1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
insmod ntfs
set root=(hd2,1)
search --no-floppy --fs-uuid --set 1e6c79396c790cb1
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-14-generic root=/dev/sdc1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Home Edition (on /dev/sdb1)" {
insmod ntfs
set root=(hd1,1)
search --no-floppy --fs-uuid --set 4648fa4648fa33f1
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
============================= sdc1/Wubi/etc/fstab: =============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
================= sdc1/Wubi: Location of files loaded by Grub: =================
2.4GB: boot/grub/grub.cfg
.8GB: boot/initrd.img-2.6.31-14-generic
2.4GB: boot/vmlinuz-2.6.31-14-generic
.8GB: initrd.img
2.4GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================
Unknown BootLoader on sdd1
00000000 eb 3c 90 4d 53 57 49 4e 34 2e 31 00 02 20 08 00 |.<.MSWIN4.1.. ..|
00000010 02 00 02 00 00 f8 f0 00 20 00 40 00 20 00 00 00 |........ .@. ...|
00000020 e0 ff 1d 00 00 00 29 a6 37 7f c5 4e 4f 20 4e 41 |......).7..NO NA|
00000030 4d 45 20 20 20 20 46 41 54 31 36 20 20 20 fa 33 |ME FAT16 .3|
00000040 c9 8e d1 bc fc 7b 16 07 bd 78 00 c5 76 00 1e 56 |.....{...x..v..V|
00000050 16 55 bf 22 05 89 7e 00 89 4e 02 b1 0b fc f3 a4 |.U."..~..N......|
00000060 06 1f bd 00 7c c6 45 fe 0f 8b 46 18 88 45 f9 38 |....|.E...F..E.8|
00000070 4e 24 7d 22 8b c1 99 e8 77 01 72 1a 83 eb 3a 66 |N$}"....w.r...:f|
00000080 a1 1c 7c 66 3b 07 8a 57 fc 75 06 80 ca 02 88 56 |..|f;..W.u.....V|
00000090 02 80 c3 10 73 ed 33 c9 8a 46 10 98 f7 66 16 03 |....s.3..F...f..|
000000a0 46 1c 13 56 1e 03 46 0e 13 d1 8b 76 11 60 89 46 |F..V..F....v.`.F|
000000b0 fc 89 56 fe b8 20 00 f7 e6 8b 5e 0b 03 c3 48 f7 |..V.. ....^...H.|
000000c0 f3 01 46 fc 11 4e fe 61 bf 00 07 e8 23 01 72 39 |..F..N.a....#.r9|
000000d0 38 2d 74 17 60 b1 0b be d8 7d f3 a6 61 74 39 4e |8-t.`....}..at9N|
000000e0 74 09 83 c7 20 3b fb 72 e7 eb dd be 7f 7d ac 98 |t... ;.r.....}..|
000000f0 03 f0 ac 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 |.....t.<.t......|
00000100 cd 10 eb ee be 82 7d eb e5 be 80 7d eb e0 98 cd |......}....}....|
00000110 16 5e 1f 66 8f 04 cd 19 be 81 7d 8b 7d 1a 8d 45 |.^.f......}.}..E|
00000120 fe 8a 4e 0d f7 e1 03 46 fc 13 56 fe b1 04 e8 c1 |..N....F..V.....|
00000130 00 72 d6 ea 00 02 70 00 b4 42 eb 2d 60 66 6a 00 |.r....p..B.-`fj.|
00000140 52 50 06 53 6a 01 6a 10 8b f4 74 ec 91 92 33 d2 |RP.Sj.j...t...3.|
00000150 f7 76 18 91 f7 76 18 42 87 ca f7 76 1a 8a f2 8a |.v...v.B...v....|
00000160 e8 c0 cc 02 0a cc b8 01 02 8a 56 24 cd 13 8d 64 |..........V$...d|
00000170 10 61 72 0a 40 75 01 42 03 5e 0b 49 75 77 c3 03 |.ar.@u.B.^.Iuw..|
00000180 18 01 27 0d 0a 49 6e 76 61 6c 69 64 20 73 79 73 |..'..Invalid sys|
00000190 74 65 6d 20 64 69 73 6b ff 0d 0a 44 69 73 6b 20 |tem disk...Disk |
000001a0 49 2f 4f 20 65 72 72 6f 72 ff 0d 0a 52 65 70 6c |I/O error...Repl|
000001b0 61 63 65 20 74 68 65 20 64 69 73 6b 2c 20 61 6e |ace the disk, an|
000001c0 64 20 74 68 65 6e 20 70 72 65 73 73 20 61 6e 79 |d then press any|
000001d0 20 6b 65 79 0d 0a 00 00 49 4f 20 20 20 20 20 20 | key....IO |
000001e0 53 59 53 4d 53 44 4f 53 20 20 20 53 59 53 7f 01 |SYSMSDOS SYS..|
000001f0 00 41 bb 00 07 80 7e 02 0e e9 40 ff 00 00 55 aa |.A....~...@...U.|
00000200
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks at sector 2928391 of
the same hard drive for core.img, core.img is at this location on /dev/sdb
and looks for (UUID=e76d4181-57e6-4524-93fb-ba5fee3b167d)/boot/grub.
=> Windows is installed in the MBR of /dev/sdb
=> Windows is installed in the MBR of /dev/sdc
=> Windows is installed in the MBR of /dev/sdd
sdb1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdb5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sdc1: __________________________________________________ _______________________
File system: ntfs
Boot sector type: Windows XP
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs: /ubuntu/winboot/wubildr.mbr /ubuntu/winboot/wubildr
/ubuntu/disks/root.disk /ubuntu/disks/swap.disk
sdc1/Wubi: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab
sdc2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sdd1: __________________________________________________ _______________________
File system: vfat
Boot sector type: Unknown
Boot sector info: No errors found in the Boot Parameter Block.
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x00000000
Partition Boot Start End Size Id System
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xea1aa9c7
Partition Boot Start End Size Id System
/dev/sdb1 63 74,862,899 74,862,837 83 Linux
/dev/sdb2 74,862,900 78,156,224 3,293,325 5 Extended
/dev/sdb5 74,862,963 78,156,224 3,293,262 82 Linux swap / Solaris
Drive: sdc ___________________ __________________________________________________ ___
Disk /dev/sdc: 20.0 GB, 20020396032 bytes
240 heads, 63 sectors/track, 2586 cylinders, total 39102336 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xcc37cc37
Partition Boot Start End Size Id System
/dev/sdc1 * 63 39,085,199 39,085,137 7 HPFS/NTFS
/dev/sdc2 39,085,200 39,100,319 15,120 f W95 Ext d (LBA)
Empty Partition
Drive: sdd ___________________ __________________________________________________ ___
Disk /dev/sdd: 1006 MB, 1006632960 bytes
65 heads, 32 sectors/track, 945 cylinders, total 1966080 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0xc3072e18
Partition Boot Start End Size Id System
/dev/sdd1 * 32 1,966,079 1,966,048 6 FAT16
blkid -c /dev/null: __________________________________________________ __________
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/loop1 a1d76960-3dd1-4b77-bc8d-5271fcb3a3fc ext4
/dev/sdb1 e76d4181-57e6-4524-93fb-ba5fee3b167d ext4
/dev/sdb5 ad7b9ac1-595e-448d-8e33-8047aa3d3433 swap
/dev/sdc1 1E6C79396C790CB1 ntfs System
/dev/sdd1 C57F-37A6 vfat UDISK
============================ "mount | grep ^/dev output: ===========================
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (rw)
/dev/loop0 /rofs squashfs (rw)
/dev/sdd1 /media/UDISK vfat (rw,nosuid,nodev,uhelper=devkit,uid=999,gid=999,sh ortname=mixed,dmask=0077,utf8=1,flush)
=========================== sdb1/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd1,1)
search --no-floppy --fs-uuid --set e76d4181-57e6-4524-93fb-ba5fee3b167d
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd1,1)
search --no-floppy --fs-uuid --set e76d4181-57e6-4524-93fb-ba5fee3b167d
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=e76d4181-57e6-4524-93fb-ba5fee3b167d ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd1,1)
search --no-floppy --fs-uuid --set e76d4181-57e6-4524-93fb-ba5fee3b167d
linux /boot/vmlinuz-2.6.31-14-generic root=UUID=e76d4181-57e6-4524-93fb-ba5fee3b167d ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sdb1/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sdb1 during installation
UUID=e76d4181-57e6-4524-93fb-ba5fee3b167d / ext4 errors=remount-ro 0 1
# swap was on /dev/sdb5 during installation
UUID=ad7b9ac1-595e-448d-8e33-8047aa3d3433 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
=================== sdb1: Location of files loaded by Grub: ===================
1.4GB: boot/grub/core.img
1.4GB: boot/grub/grub.cfg
1.5GB: boot/initrd.img-2.6.31-14-generic
1.5GB: boot/vmlinuz-2.6.31-14-generic
1.5GB: initrd.img
1.5GB: vmlinuz
======================== sdc1/Wubi/boot/grub/grub.cfg: ========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/10_lupin ###
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
insmod ntfs
set root=(hd2,1)
search --no-floppy --fs-uuid --set 1e6c79396c790cb1
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-14-generic root=/dev/sdc1 loop=/ubuntu/disks/root.disk ro quiet splash
initrd /boot/initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
insmod ntfs
set root=(hd2,1)
search --no-floppy --fs-uuid --set 1e6c79396c790cb1
loopback loop0 /ubuntu/disks/root.disk
set root=(loop0)
linux /boot/vmlinuz-2.6.31-14-generic root=/dev/sdc1 loop=/ubuntu/disks/root.disk ro single
initrd /boot/initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_lupin ###
### BEGIN /etc/grub.d/20_memtest86+ ###
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Microsoft Windows XP Home Edition (on /dev/sdb1)" {
insmod ntfs
set root=(hd1,1)
search --no-floppy --fs-uuid --set 4648fa4648fa33f1
drivemap -s (hd0) ${root}
chainloader +1
}
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
============================= sdc1/Wubi/etc/fstab: =============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
/host/ubuntu/disks/root.disk / ext4 loop,errors=remount-ro 0 1
/host/ubuntu/disks/swap.disk none swap loop,sw 0 0
================= sdc1/Wubi: Location of files loaded by Grub: =================
2.4GB: boot/grub/grub.cfg
.8GB: boot/initrd.img-2.6.31-14-generic
2.4GB: boot/vmlinuz-2.6.31-14-generic
.8GB: initrd.img
2.4GB: vmlinuz
=========================== Unknown MBRs/Boot Sectors/etc =======================
Unknown BootLoader on sdd1
00000000 eb 3c 90 4d 53 57 49 4e 34 2e 31 00 02 20 08 00 |.<.MSWIN4.1.. ..|
00000010 02 00 02 00 00 f8 f0 00 20 00 40 00 20 00 00 00 |........ .@. ...|
00000020 e0 ff 1d 00 00 00 29 a6 37 7f c5 4e 4f 20 4e 41 |......).7..NO NA|
00000030 4d 45 20 20 20 20 46 41 54 31 36 20 20 20 fa 33 |ME FAT16 .3|
00000040 c9 8e d1 bc fc 7b 16 07 bd 78 00 c5 76 00 1e 56 |.....{...x..v..V|
00000050 16 55 bf 22 05 89 7e 00 89 4e 02 b1 0b fc f3 a4 |.U."..~..N......|
00000060 06 1f bd 00 7c c6 45 fe 0f 8b 46 18 88 45 f9 38 |....|.E...F..E.8|
00000070 4e 24 7d 22 8b c1 99 e8 77 01 72 1a 83 eb 3a 66 |N$}"....w.r...:f|
00000080 a1 1c 7c 66 3b 07 8a 57 fc 75 06 80 ca 02 88 56 |..|f;..W.u.....V|
00000090 02 80 c3 10 73 ed 33 c9 8a 46 10 98 f7 66 16 03 |....s.3..F...f..|
000000a0 46 1c 13 56 1e 03 46 0e 13 d1 8b 76 11 60 89 46 |F..V..F....v.`.F|
000000b0 fc 89 56 fe b8 20 00 f7 e6 8b 5e 0b 03 c3 48 f7 |..V.. ....^...H.|
000000c0 f3 01 46 fc 11 4e fe 61 bf 00 07 e8 23 01 72 39 |..F..N.a....#.r9|
000000d0 38 2d 74 17 60 b1 0b be d8 7d f3 a6 61 74 39 4e |8-t.`....}..at9N|
000000e0 74 09 83 c7 20 3b fb 72 e7 eb dd be 7f 7d ac 98 |t... ;.r.....}..|
000000f0 03 f0 ac 84 c0 74 17 3c ff 74 09 b4 0e bb 07 00 |.....t.<.t......|
00000100 cd 10 eb ee be 82 7d eb e5 be 80 7d eb e0 98 cd |......}....}....|
00000110 16 5e 1f 66 8f 04 cd 19 be 81 7d 8b 7d 1a 8d 45 |.^.f......}.}..E|
00000120 fe 8a 4e 0d f7 e1 03 46 fc 13 56 fe b1 04 e8 c1 |..N....F..V.....|
00000130 00 72 d6 ea 00 02 70 00 b4 42 eb 2d 60 66 6a 00 |.r....p..B.-`fj.|
00000140 52 50 06 53 6a 01 6a 10 8b f4 74 ec 91 92 33 d2 |RP.Sj.j...t...3.|
00000150 f7 76 18 91 f7 76 18 42 87 ca f7 76 1a 8a f2 8a |.v...v.B...v....|
00000160 e8 c0 cc 02 0a cc b8 01 02 8a 56 24 cd 13 8d 64 |..........V$...d|
00000170 10 61 72 0a 40 75 01 42 03 5e 0b 49 75 77 c3 03 |.ar.@u.B.^.Iuw..|
00000180 18 01 27 0d 0a 49 6e 76 61 6c 69 64 20 73 79 73 |..'..Invalid sys|
00000190 74 65 6d 20 64 69 73 6b ff 0d 0a 44 69 73 6b 20 |tem disk...Disk |
000001a0 49 2f 4f 20 65 72 72 6f 72 ff 0d 0a 52 65 70 6c |I/O error...Repl|
000001b0 61 63 65 20 74 68 65 20 64 69 73 6b 2c 20 61 6e |ace the disk, an|
000001c0 64 20 74 68 65 6e 20 70 72 65 73 73 20 61 6e 79 |d then press any|
000001d0 20 6b 65 79 0d 0a 00 00 49 4f 20 20 20 20 20 20 | key....IO |
000001e0 53 59 53 4d 53 44 4f 53 20 20 20 53 59 53 7f 01 |SYSMSDOS SYS..|
000001f0 00 41 bb 00 07 80 7e 02 0e e9 40 ff 00 00 55 aa |.A....~...@...U.|
00000200