Sandy Al
February 23rd, 2010, 11:41 PM
Hey, I'm new to ubuntu and loving it! :D
I've run into a small issue, and I'm hoping you may be able to help.
I was installing the hardware driver for Nvidia when there was an error and it didn't complete the install. From that point on, any time anything is installed (whether through synaptic package manager or ubuntu software center, or wherever), the installation 'fails' even though the newly installed app then seems to work perfectly fine. It's like it keeps coming back to what it previously was not able to install, and then has the same 'error exit status 2'
This is the failure message I get (it's always the same list of python packages at the end):
installArchives() failed: Preconfiguring packages ...
Preconfiguring packages ...
Selecting previously deselected package python-numeric.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 148578 files and directories currently installed.)
Unpacking python-numeric (from .../python-numeric_24.2-9ubuntu1_i386.deb) ...
Selecting previously deselected package gdesklets.
Unpacking gdesklets (from .../gdesklets_0.36.1-2ubuntu1_i386.deb) ...
Selecting previously deselected package gdesklets-data.
Unpacking gdesklets-data (from .../gdesklets-data_0.35.6-3_all.deb) ...
Selecting previously deselected package libcarp-clan-perl.
Unpacking libcarp-clan-perl (from .../libcarp-clan-perl_6.00-1_all.deb) ...
Selecting previously deselected package libbit-vector-perl.
Unpacking libbit-vector-perl (from .../libbit-vector-perl_6.6-1_i386.deb) ...
Selecting previously deselected package libdate-manip-perl.
Unpacking libdate-manip-perl (from .../libdate-manip-perl_5.54-1_all.deb) ...
Selecting previously deselected package libuser-perl.
Unpacking libuser-perl (from .../libuser-perl_1.6-2_all.deb) ...
Selecting previously deselected package libfile-slurp-perl.
Unpacking libfile-slurp-perl (from .../libfile-slurp-perl_9999.12-2_all.deb) ...
Selecting previously deselected package libwww-search-perl.
Unpacking libwww-search-perl (from .../libwww-search-perl_2.50.70.debian.2_all.deb) ...
Selecting previously deselected package python-fpconst.
Unpacking python-fpconst (from .../python-fpconst_0.7.2-4_all.deb) ...
Selecting previously deselected package python-soappy.
Unpacking python-soappy (from .../python-soappy_0.12.0-4_all.deb) ...
Selecting previously deselected package hddtemp.
Unpacking hddtemp (from .../hddtemp_0.3-beta15-45_i386.deb) ...
Processing triggers for desktop-file-utils ...
Processing triggers for gnome-icon-theme ...
Processing triggers for shared-mime-info ...
Processing triggers for man-db ...
Processing triggers for menu ...
Processing triggers for ureadahead ...
ureadahead will be reprofiled on next reboot
Setting up python-evolution (2.28.0-0ubuntu1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing python-evolution (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up python-gtkmozembed (2.25.3-3ubuntu1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing python-gtkmozembed (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up python-lxml (2.1.5-1ubuntu2) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing python-lxml (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up python-numpy (1:1.3.0-3) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing python-numpy (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up python-reportlab (2.3-0ubuntu1) ...
No apport report written because MaxReports is reached already
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing python-reportlab (--configure):
subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of python-reportlab-accel:
python-reportlab-accel depends on python-reportlab (>= 2.3-0ubuntu1); however:
Package python-reportlab is not configured yet.
dpkg: error processing python-reportlab-accel (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of python-uniconvertor:
python-uniconvertor depends on python-reportlab; however:
Package python-reportlab is not configured yet.
dpkg: error processing python-uniconvertor (--configure):
dependency problems - leaving unconfigured
Setting up python-numeric (24.2-9ubuntu1) ...
No apport report written because MaxReports is reached already
No apport report written because MaxReports is reached already
No apport report written because MaxReports is reached already
Setting up gdesklets (0.36.1-2ubuntu1) ...
/usr/lib/gdesklets/sensor/Sensor.py:82: SyntaxWarning: assertion is always true, perhaps remove parentheses?
assert(self.__id, "The ID is invalid in the constructor.")
Setting up gdesklets-data (0.35.6-3) ...
Setting up libcarp-clan-perl (6.00-1) ...
Setting up libbit-vector-perl (6.6-1) ...
Setting up libdate-manip-perl (5.54-1) ...
Setting up libuser-perl (1.6-2) ...
Setting up libfile-slurp-perl (9999.12-2) ...
Setting up libwww-search-perl (2.50.70.debian.2) ...
Setting up python-fpconst (0.7.2-4) ...
Setting up python-soappy (0.12.0-4) ...
Setting up hddtemp (0.3-beta15-45) ...
* Starting disk temperature monitoring daemon hddtemp:
...done.
Processing triggers for menu ...
Processing triggers for python-support ...
Errors were encountered while processing:
python-evolution
python-gtkmozembed
python-lxml
python-numpy
python-reportlab
python-reportlab-accel
python-uniconvertor
HELP!
Thanks in advance!
I've run into a small issue, and I'm hoping you may be able to help.
I was installing the hardware driver for Nvidia when there was an error and it didn't complete the install. From that point on, any time anything is installed (whether through synaptic package manager or ubuntu software center, or wherever), the installation 'fails' even though the newly installed app then seems to work perfectly fine. It's like it keeps coming back to what it previously was not able to install, and then has the same 'error exit status 2'
This is the failure message I get (it's always the same list of python packages at the end):
installArchives() failed: Preconfiguring packages ...
Preconfiguring packages ...
Selecting previously deselected package python-numeric.
(Reading database ...
(Reading database ... 5%
(Reading database ... 10%
(Reading database ... 15%
(Reading database ... 20%
(Reading database ... 25%
(Reading database ... 30%
(Reading database ... 35%
(Reading database ... 40%
(Reading database ... 45%
(Reading database ... 50%
(Reading database ... 55%
(Reading database ... 60%
(Reading database ... 65%
(Reading database ... 70%
(Reading database ... 75%
(Reading database ... 80%
(Reading database ... 85%
(Reading database ... 90%
(Reading database ... 95%
(Reading database ... 100%
(Reading database ... 148578 files and directories currently installed.)
Unpacking python-numeric (from .../python-numeric_24.2-9ubuntu1_i386.deb) ...
Selecting previously deselected package gdesklets.
Unpacking gdesklets (from .../gdesklets_0.36.1-2ubuntu1_i386.deb) ...
Selecting previously deselected package gdesklets-data.
Unpacking gdesklets-data (from .../gdesklets-data_0.35.6-3_all.deb) ...
Selecting previously deselected package libcarp-clan-perl.
Unpacking libcarp-clan-perl (from .../libcarp-clan-perl_6.00-1_all.deb) ...
Selecting previously deselected package libbit-vector-perl.
Unpacking libbit-vector-perl (from .../libbit-vector-perl_6.6-1_i386.deb) ...
Selecting previously deselected package libdate-manip-perl.
Unpacking libdate-manip-perl (from .../libdate-manip-perl_5.54-1_all.deb) ...
Selecting previously deselected package libuser-perl.
Unpacking libuser-perl (from .../libuser-perl_1.6-2_all.deb) ...
Selecting previously deselected package libfile-slurp-perl.
Unpacking libfile-slurp-perl (from .../libfile-slurp-perl_9999.12-2_all.deb) ...
Selecting previously deselected package libwww-search-perl.
Unpacking libwww-search-perl (from .../libwww-search-perl_2.50.70.debian.2_all.deb) ...
Selecting previously deselected package python-fpconst.
Unpacking python-fpconst (from .../python-fpconst_0.7.2-4_all.deb) ...
Selecting previously deselected package python-soappy.
Unpacking python-soappy (from .../python-soappy_0.12.0-4_all.deb) ...
Selecting previously deselected package hddtemp.
Unpacking hddtemp (from .../hddtemp_0.3-beta15-45_i386.deb) ...
Processing triggers for desktop-file-utils ...
Processing triggers for gnome-icon-theme ...
Processing triggers for shared-mime-info ...
Processing triggers for man-db ...
Processing triggers for menu ...
Processing triggers for ureadahead ...
ureadahead will be reprofiled on next reboot
Setting up python-evolution (2.28.0-0ubuntu1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing python-evolution (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up python-gtkmozembed (2.25.3-3ubuntu1) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing python-gtkmozembed (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up python-lxml (2.1.5-1ubuntu2) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing python-lxml (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up python-numpy (1:1.3.0-3) ...
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing python-numpy (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up python-reportlab (2.3-0ubuntu1) ...
No apport report written because MaxReports is reached already
dpkg (subprocess): unable to execute installed post-installation script: Exec format error
dpkg: error processing python-reportlab (--configure):
subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of python-reportlab-accel:
python-reportlab-accel depends on python-reportlab (>= 2.3-0ubuntu1); however:
Package python-reportlab is not configured yet.
dpkg: error processing python-reportlab-accel (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of python-uniconvertor:
python-uniconvertor depends on python-reportlab; however:
Package python-reportlab is not configured yet.
dpkg: error processing python-uniconvertor (--configure):
dependency problems - leaving unconfigured
Setting up python-numeric (24.2-9ubuntu1) ...
No apport report written because MaxReports is reached already
No apport report written because MaxReports is reached already
No apport report written because MaxReports is reached already
Setting up gdesklets (0.36.1-2ubuntu1) ...
/usr/lib/gdesklets/sensor/Sensor.py:82: SyntaxWarning: assertion is always true, perhaps remove parentheses?
assert(self.__id, "The ID is invalid in the constructor.")
Setting up gdesklets-data (0.35.6-3) ...
Setting up libcarp-clan-perl (6.00-1) ...
Setting up libbit-vector-perl (6.6-1) ...
Setting up libdate-manip-perl (5.54-1) ...
Setting up libuser-perl (1.6-2) ...
Setting up libfile-slurp-perl (9999.12-2) ...
Setting up libwww-search-perl (2.50.70.debian.2) ...
Setting up python-fpconst (0.7.2-4) ...
Setting up python-soappy (0.12.0-4) ...
Setting up hddtemp (0.3-beta15-45) ...
* Starting disk temperature monitoring daemon hddtemp:
...done.
Processing triggers for menu ...
Processing triggers for python-support ...
Errors were encountered while processing:
python-evolution
python-gtkmozembed
python-lxml
python-numpy
python-reportlab
python-reportlab-accel
python-uniconvertor
HELP!
Thanks in advance!