rcaca0
February 21st, 2010, 07:18 AM
Hello Again,
I have been trying to install Ubuntu on my main computer for some time. I think I have two problems: my hard drive and video card. I started with Ubuntu 9.04 but got nowhere. I am now trying Ubuntu 9.10 32 bit. I can at least use the live cd if I put the video on safe mode.
Just in case you are wondering, I have tried other distros: Fedora, OpenSUSE, Slitaz, Wolvix, etc. Only Slitaz and Ubuntu 9.10 works on a live cd.
Information on my computer:
OS: Trying to install Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia)
Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM
Ram: 4 GB (I think, its been awhile since I built this thing)
DVD Burner: LG
I think I have two problems: the Sata Hard Drive and the Video Card. When I go to install it, I can get to the install menu but from there all I get is a blank screen. I have tried to put the video in safe mode then install it but I get the same result: a blank screen.
How do I know if Ubuntu recognize the Hard Drive and Video Card? I tried the mount command to see what it sees but I didn't notice any Sata Drives. I was told that I may have to do something with the kernel so it will recognize my Hard Drive. How would I do that?
I don't know what my next steps should be for troubleshooting so any help will be appreciated. I have been working on this for awhile now.
On a side note, does it matter which Sata Plug the hard drive is on? Right now I have it on the 1st one but I would like to move it to the second one because I want a dual boot system. And yes I know I can use the same hard drive but I would like to keep them separated and use a switch to pick which OS system to use.
While running on the Live Cd, Ubuntu seems to know about my video card and ask to install some drivers but then it asked to be rebooted and it came back up not recognizing anything; video card and hard drive that is.
On the live cd I ran the following commands: lswh, lspci, mount, and df. I am not too sure if they will show if the hard drive and the video card are working since I did them on the Live CD. Also on the lspci command, I did this after Ubuntu loaded the driver for the card.
Here is the output of the lswh command:
ubuntu
description: Computer
width: 32 bits
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 3276MiB
*-cpu
product: AMD Phenom(tm) 9500 Quad-Core Processor
vendor: Advanced Micro Devices [AMD]
physical id: 1
bus info: cpu@0
version: 15.2.2
size: 2200MHz
capacity: 2200MHz
width: 64 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs cpufreq
*-cache:0
description: L1 cache
physical id: 0
size: 128KiB
*-cache:1
description: L2 cache
physical id: 1
size: 512KiB
*-pci:0
description: Host bridge
product: RX780/RX790 Chipset Host Bridge
vendor: ATI Technologies Inc
physical id: 100
bus info: pci@0000:00:00.0
version: 00
width: 32 bits
clock: 66MHz
*-pci:0
description: PCI bridge
product: RD790 PCI to PCI bridge (external gfx0 port A)
vendor: ATI Technologies Inc
physical id: 2
bus info: pci@0000:00:02.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:25 ioport:d000(size=4096) memory:f8000000-fbefffff ioport:d0000000(size=268435456)
*-display
description: VGA compatible controller
product: G96 [GeForce 9500 GT]
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff(prefetchable) memory:f8000000-f9ffffff ioport:dc00(size=128) memory:fbe80000-fbefffff(prefetchable)
*-pci:1
description: PCI bridge
product: RD790 PCI to PCI bridge (PCI express gpp port C)
vendor: ATI Technologies Inc
physical id: 6
bus info: pci@0000:00:06.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:26 ioport:e000(size=4096) memory:fbf00000-fbffffff ioport:f6f00000(size=1048576)
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 02
serial: 00:23:54:d7:0b:b1
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list rom ethernet physical
configuration: broadcast=yes driver=r8169 driverversion=2.3LK-NAPI ip=192.168.1.101 latency=0 multicast=yes
resources: irq:27 ioport:e800(size=256) memory:fbfff000-fbffffff memory:f6ff0000-f6ffffff(prefetchable) memory:fbfc0000-fbfdffff(prefetchable)
*-storage
description: SATA controller
product: SB700/SB800 SATA Controller [IDE mode]
vendor: ATI Technologies Inc
physical id: 11
bus info: pci@0000:00:11.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: storage bus_master cap_list
configuration: driver=ahci latency=64
resources: irq:22 ioport:c000(size=8) ioport:b000(size=4) ioport:a000(size=8) ioport:9000(size=4) ioport:8000(size=16) memory:f7fff800-f7fffbff
*-usb:0
description: USB Controller
product: SB700/SB800 USB OHCI0 Controller
vendor: ATI Technologies Inc
physical id: 12
bus info: pci@0000:00:12.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:16 memory:f7ffe000-f7ffefff
*-usb:1
description: USB Controller
product: SB700 USB OHCI1 Controller
vendor: ATI Technologies Inc
physical id: 12.1
bus info: pci@0000:00:12.1
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:16 memory:f7ffd000-f7ffdfff
*-usb:2
description: USB Controller
product: SB700/SB800 USB EHCI Controller
vendor: ATI Technologies Inc
physical id: 12.2
bus info: pci@0000:00:12.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master cap_list
configuration: driver=ehci_hcd latency=64
resources: irq:17 memory:f7fff000-f7fff0ff
*-usb:3
description: USB Controller
product: SB700/SB800 USB OHCI0 Controller
vendor: ATI Technologies Inc
physical id: 13
bus info: pci@0000:00:13.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:18 memory:f7ffc000-f7ffcfff
*-usb:4
description: USB Controller
product: SB700 USB OHCI1 Controller
vendor: ATI Technologies Inc
physical id: 13.1
bus info: pci@0000:00:13.1
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:18 memory:f7ffb000-f7ffbfff
*-usb:5
description: USB Controller
product: SB700/SB800 USB EHCI Controller
vendor: ATI Technologies Inc
physical id: 13.2
bus info: pci@0000:00:13.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master cap_list
configuration: driver=ehci_hcd latency=64
resources: irq:19 memory:f7ffa800-f7ffa8ff
*-serial UNCLAIMED
description: SMBus
product: SBx00 SMBus Controller
vendor: ATI Technologies Inc
physical id: 14
bus info: pci@0000:00:14.0
version: 3a
width: 32 bits
clock: 66MHz
capabilities: cap_list
configuration: latency=0
*-ide
description: IDE interface
product: SB700/SB800 IDE Controller
vendor: ATI Technologies Inc
physical id: 14.1
bus info: pci@0000:00:14.1
version: 00
width: 32 bits
clock: 66MHz
capabilities: ide bus_master cap_list
configuration: driver=pata_atiixp latency=64
resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16)
*-multimedia
description: Audio device
product: SBx00 Azalia (Intel HDA)
vendor: ATI Technologies Inc
physical id: 14.2
bus info: pci@0000:00:14.2
version: 00
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=HDA Intel latency=64
resources: irq:16 memory:f7ff4000-f7ff7fff
*-isa
description: ISA bridge
product: SB700/SB800 LPC host controller
vendor: ATI Technologies Inc
physical id: 14.3
bus info: pci@0000:00:14.3
version: 00
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
*-pci:2
description: PCI bridge
product: SBx00 PCI to PCI Bridge
vendor: ATI Technologies Inc
physical id: 14.4
bus info: pci@0000:00:14.4
version: 00
width: 32 bits
clock: 66MHz
capabilities: pci bus_master
*-usb:6
description: USB Controller
product: SB700/SB800 USB OHCI2 Controller
vendor: ATI Technologies Inc
physical id: 14.5
bus info: pci@0000:00:14.5
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:18 memory:f7ff9000-f7ff9fff
*-pci:1
description: Host bridge
product: K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
vendor: Advanced Micro Devices [AMD]
physical id: 101
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:2
description: Host bridge
product: K10 [Opteron, Athlon64, Sempron] Address Map
vendor: Advanced Micro Devices [AMD]
physical id: 102
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:3
description: Host bridge
product: K10 [Opteron, Athlon64, Sempron] DRAM Controller
vendor: Advanced Micro Devices [AMD]
physical id: 103
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:4
description: Host bridge
product: K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
vendor: Advanced Micro Devices [AMD]
physical id: 104
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: K10 [Opteron, Athlon64, Sempron] Link Control
vendor: Advanced Micro Devices [AMD]
physical id: 105
bus info: pci@0000:00:18.4
version: 00
width: 32 bits
clock: 33MHz
Here is the output of the lspci command:
00:00.0 Host bridge: ATI Technologies Inc RX780/RX790 Chipset Host Bridge
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:06.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9500 GT] (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Here is the output of the mount command:
aufs on / type aufs (rw)
none on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
/dev/sr0 on /cdrom type iso9660 (rw)
/dev/loop0 on /rofs type squashfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
Here is the output of the df command (I did this just in case I could not recognize the hard drive in the mount command):
Filesystem 1K-blocks Used Available Use% Mounted on
aufs 1677608 191828 1485780 12% /
udev 1677608 244 1677364 1% /dev
/dev/sr0 706532 706532 0 100% /cdrom
/dev/loop0 684032 684032 0 100% /rofs
none 1677608 136 1677472 1% /dev/shm
tmpfs 1677608 68 1677540 1% /tmp
none 1677608 88 1677520 1% /var/run
none 1677608 0 1677608 0% /var/lock
none 1677608 0 1677608 0% /lib/init/rw
thanks,
R
I have been trying to install Ubuntu on my main computer for some time. I think I have two problems: my hard drive and video card. I started with Ubuntu 9.04 but got nowhere. I am now trying Ubuntu 9.10 32 bit. I can at least use the live cd if I put the video on safe mode.
Just in case you are wondering, I have tried other distros: Fedora, OpenSUSE, Slitaz, Wolvix, etc. Only Slitaz and Ubuntu 9.10 works on a live cd.
Information on my computer:
OS: Trying to install Ubuntu 9.10 32bit
Motherboard: ASUS M3A78
CPU: AMD Phenom 9500 Quad Core
Video Card: Galaxy Geforce 9500 GT 1GB 128 bit DDR2 (Nvidia)
Hard Drive: Hitachi 1 TB Sata Drive 3 Gb/sec 7200 RPM
Ram: 4 GB (I think, its been awhile since I built this thing)
DVD Burner: LG
I think I have two problems: the Sata Hard Drive and the Video Card. When I go to install it, I can get to the install menu but from there all I get is a blank screen. I have tried to put the video in safe mode then install it but I get the same result: a blank screen.
How do I know if Ubuntu recognize the Hard Drive and Video Card? I tried the mount command to see what it sees but I didn't notice any Sata Drives. I was told that I may have to do something with the kernel so it will recognize my Hard Drive. How would I do that?
I don't know what my next steps should be for troubleshooting so any help will be appreciated. I have been working on this for awhile now.
On a side note, does it matter which Sata Plug the hard drive is on? Right now I have it on the 1st one but I would like to move it to the second one because I want a dual boot system. And yes I know I can use the same hard drive but I would like to keep them separated and use a switch to pick which OS system to use.
While running on the Live Cd, Ubuntu seems to know about my video card and ask to install some drivers but then it asked to be rebooted and it came back up not recognizing anything; video card and hard drive that is.
On the live cd I ran the following commands: lswh, lspci, mount, and df. I am not too sure if they will show if the hard drive and the video card are working since I did them on the Live CD. Also on the lspci command, I did this after Ubuntu loaded the driver for the card.
Here is the output of the lswh command:
ubuntu
description: Computer
width: 32 bits
*-core
description: Motherboard
physical id: 0
*-memory
description: System memory
physical id: 0
size: 3276MiB
*-cpu
product: AMD Phenom(tm) 9500 Quad-Core Processor
vendor: Advanced Micro Devices [AMD]
physical id: 1
bus info: cpu@0
version: 15.2.2
size: 2200MHz
capacity: 2200MHz
width: 64 bits
capabilities: fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 3dnowext 3dnow constant_tsc nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs cpufreq
*-cache:0
description: L1 cache
physical id: 0
size: 128KiB
*-cache:1
description: L2 cache
physical id: 1
size: 512KiB
*-pci:0
description: Host bridge
product: RX780/RX790 Chipset Host Bridge
vendor: ATI Technologies Inc
physical id: 100
bus info: pci@0000:00:00.0
version: 00
width: 32 bits
clock: 66MHz
*-pci:0
description: PCI bridge
product: RD790 PCI to PCI bridge (external gfx0 port A)
vendor: ATI Technologies Inc
physical id: 2
bus info: pci@0000:00:02.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:25 ioport:d000(size=4096) memory:f8000000-fbefffff ioport:d0000000(size=268435456)
*-display
description: VGA compatible controller
product: G96 [GeForce 9500 GT]
vendor: nVidia Corporation
physical id: 0
bus info: pci@0000:01:00.0
version: a1
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list rom
configuration: driver=nvidia latency=0
resources: irq:18 memory:fa000000-faffffff memory:d0000000-dfffffff(prefetchable) memory:f8000000-f9ffffff ioport:dc00(size=128) memory:fbe80000-fbefffff(prefetchable)
*-pci:1
description: PCI bridge
product: RD790 PCI to PCI bridge (PCI express gpp port C)
vendor: ATI Technologies Inc
physical id: 6
bus info: pci@0000:00:06.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci bus_master cap_list
configuration: driver=pcieport-driver
resources: irq:26 ioport:e000(size=4096) memory:fbf00000-fbffffff ioport:f6f00000(size=1048576)
*-network
description: Ethernet interface
product: RTL8111/8168B PCI Express Gigabit Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:02:00.0
logical name: eth0
version: 02
serial: 00:23:54:d7:0b:b1
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list rom ethernet physical
configuration: broadcast=yes driver=r8169 driverversion=2.3LK-NAPI ip=192.168.1.101 latency=0 multicast=yes
resources: irq:27 ioport:e800(size=256) memory:fbfff000-fbffffff memory:f6ff0000-f6ffffff(prefetchable) memory:fbfc0000-fbfdffff(prefetchable)
*-storage
description: SATA controller
product: SB700/SB800 SATA Controller [IDE mode]
vendor: ATI Technologies Inc
physical id: 11
bus info: pci@0000:00:11.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: storage bus_master cap_list
configuration: driver=ahci latency=64
resources: irq:22 ioport:c000(size=8) ioport:b000(size=4) ioport:a000(size=8) ioport:9000(size=4) ioport:8000(size=16) memory:f7fff800-f7fffbff
*-usb:0
description: USB Controller
product: SB700/SB800 USB OHCI0 Controller
vendor: ATI Technologies Inc
physical id: 12
bus info: pci@0000:00:12.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:16 memory:f7ffe000-f7ffefff
*-usb:1
description: USB Controller
product: SB700 USB OHCI1 Controller
vendor: ATI Technologies Inc
physical id: 12.1
bus info: pci@0000:00:12.1
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:16 memory:f7ffd000-f7ffdfff
*-usb:2
description: USB Controller
product: SB700/SB800 USB EHCI Controller
vendor: ATI Technologies Inc
physical id: 12.2
bus info: pci@0000:00:12.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master cap_list
configuration: driver=ehci_hcd latency=64
resources: irq:17 memory:f7fff000-f7fff0ff
*-usb:3
description: USB Controller
product: SB700/SB800 USB OHCI0 Controller
vendor: ATI Technologies Inc
physical id: 13
bus info: pci@0000:00:13.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:18 memory:f7ffc000-f7ffcfff
*-usb:4
description: USB Controller
product: SB700 USB OHCI1 Controller
vendor: ATI Technologies Inc
physical id: 13.1
bus info: pci@0000:00:13.1
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:18 memory:f7ffb000-f7ffbfff
*-usb:5
description: USB Controller
product: SB700/SB800 USB EHCI Controller
vendor: ATI Technologies Inc
physical id: 13.2
bus info: pci@0000:00:13.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master cap_list
configuration: driver=ehci_hcd latency=64
resources: irq:19 memory:f7ffa800-f7ffa8ff
*-serial UNCLAIMED
description: SMBus
product: SBx00 SMBus Controller
vendor: ATI Technologies Inc
physical id: 14
bus info: pci@0000:00:14.0
version: 3a
width: 32 bits
clock: 66MHz
capabilities: cap_list
configuration: latency=0
*-ide
description: IDE interface
product: SB700/SB800 IDE Controller
vendor: ATI Technologies Inc
physical id: 14.1
bus info: pci@0000:00:14.1
version: 00
width: 32 bits
clock: 66MHz
capabilities: ide bus_master cap_list
configuration: driver=pata_atiixp latency=64
resources: irq:16 ioport:1f0(size=8) ioport:3f6 ioport:170(size=8) ioport:376 ioport:ff00(size=16)
*-multimedia
description: Audio device
product: SBx00 Azalia (Intel HDA)
vendor: ATI Technologies Inc
physical id: 14.2
bus info: pci@0000:00:14.2
version: 00
width: 64 bits
clock: 33MHz
capabilities: bus_master cap_list
configuration: driver=HDA Intel latency=64
resources: irq:16 memory:f7ff4000-f7ff7fff
*-isa
description: ISA bridge
product: SB700/SB800 LPC host controller
vendor: ATI Technologies Inc
physical id: 14.3
bus info: pci@0000:00:14.3
version: 00
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
*-pci:2
description: PCI bridge
product: SBx00 PCI to PCI Bridge
vendor: ATI Technologies Inc
physical id: 14.4
bus info: pci@0000:00:14.4
version: 00
width: 32 bits
clock: 66MHz
capabilities: pci bus_master
*-usb:6
description: USB Controller
product: SB700/SB800 USB OHCI2 Controller
vendor: ATI Technologies Inc
physical id: 14.5
bus info: pci@0000:00:14.5
version: 00
width: 32 bits
clock: 66MHz
capabilities: bus_master
configuration: driver=ohci_hcd latency=64
resources: irq:18 memory:f7ff9000-f7ff9fff
*-pci:1
description: Host bridge
product: K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
vendor: Advanced Micro Devices [AMD]
physical id: 101
bus info: pci@0000:00:18.0
version: 00
width: 32 bits
clock: 33MHz
*-pci:2
description: Host bridge
product: K10 [Opteron, Athlon64, Sempron] Address Map
vendor: Advanced Micro Devices [AMD]
physical id: 102
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:3
description: Host bridge
product: K10 [Opteron, Athlon64, Sempron] DRAM Controller
vendor: Advanced Micro Devices [AMD]
physical id: 103
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:4
description: Host bridge
product: K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
vendor: Advanced Micro Devices [AMD]
physical id: 104
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: K10 [Opteron, Athlon64, Sempron] Link Control
vendor: Advanced Micro Devices [AMD]
physical id: 105
bus info: pci@0000:00:18.4
version: 00
width: 32 bits
clock: 33MHz
Here is the output of the lspci command:
00:00.0 Host bridge: ATI Technologies Inc RX780/RX790 Chipset Host Bridge
00:02.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (external gfx0 port A)
00:06.0 PCI bridge: ATI Technologies Inc RD790 PCI to PCI bridge (PCI express gpp port C)
00:11.0 SATA controller: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode]
00:12.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB700 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB700/SB800 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3a)
00:14.1 IDE interface: ATI Technologies Inc SB700/SB800 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB700/SB800 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices [AMD] K10 [Opteron, Athlon64, Sempron] Link Control
01:00.0 VGA compatible controller: nVidia Corporation G96 [GeForce 9500 GT] (rev a1)
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02)
Here is the output of the mount command:
aufs on / type aufs (rw)
none on /proc type proc (rw,noexec,nosuid,nodev)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
udev on /dev type tmpfs (rw,mode=0755)
/dev/sr0 on /cdrom type iso9660 (rw)
/dev/loop0 on /rofs type squashfs (rw)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/ubuntu/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=ubuntu)
Here is the output of the df command (I did this just in case I could not recognize the hard drive in the mount command):
Filesystem 1K-blocks Used Available Use% Mounted on
aufs 1677608 191828 1485780 12% /
udev 1677608 244 1677364 1% /dev
/dev/sr0 706532 706532 0 100% /cdrom
/dev/loop0 684032 684032 0 100% /rofs
none 1677608 136 1677472 1% /dev/shm
tmpfs 1677608 68 1677540 1% /tmp
none 1677608 88 1677520 1% /var/run
none 1677608 0 1677608 0% /var/lock
none 1677608 0 1677608 0% /lib/init/rw
thanks,
R