PDA

View Full Version : [ubuntu] Login screen twinkling after install LXDE at Ubuntu 8.04.3



good5209
February 14th, 2010, 06:31 PM
Hi, everybody


Environment: Ubuntu 8.04.3

I surf to LXDE website and download tarball for compile by myself.

It say need newer version gtk+ library, so I go to download gtk+ tarball too. And make install it.

When glib-2.22.4 install finish, I attend LXDE's deb files for install, I add lxde apt information and use apt-get install lxde.

Install finish, so I logout gnome and want login LXDE, but it happen this problem:
NVIDIA Logo -> orange screen, waiting cursor -> black terminal screen -> NVIDIA Logo -> ...

I has tried these to solve this problem, but not work:
1.sudo dpkg-reconfigure gnome-desktop-environment
terminal say nothing after this.

2.sudo apt-get remove lxde openbox lxde-*

3.sudo mv /etc/X11/xorg.conf /etc/X11/xorg.conf_backup

4.sudo /etc/init.d/kdm start
terminal say kdm isn't default setting.

5.sudo aptitude remove xserver; sudo aptitude install ubuntu-desktop


a part of dmesg:

[ 23.860912] EXT3-fs: mounted filesystem with ordered data mode.
[ 32.403587] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 32.472170] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 33.469996] Linux agpgart interface v0.102
[ 33.757214] agpgart: Detected SiS chipset - id:1633
[ 33.762151] agpgart: AGP aperture is 64M @ 0xe0000000
[ 33.807525] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 33.848893] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 34.001069] input: Power Button (FF) as /devices/virtual/input/input3
[ 34.012786] ACPI: Power Button (FF) [PWRF]
[ 34.013013] input: Power Button (CM) as /devices/virtual/input/input4
[ 34.020763] ACPI: Power Button (CM) [PWRB]
[ 35.735103] nvidia: module license 'NVIDIA' taints kernel.
[ 36.683428] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 23
[ 36.902776] parport_pc 00:07: reported by Plug and Play ACPI
[ 36.902889] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 37.004469] intel8x0_measure_ac97_clock: measured 54752 usecs
[ 37.004475] intel8x0: clocking to 48000
[ 37.069550] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[ 37.069955] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008
[ 40.174063] lp0: using parport0 (interrupt-driven).
[ 40.249246] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
[ 40.304351] w83627ehf: Found W83627EHG chip at 0x290
[ 40.304541] w83627ehf w83627ehf.656: Setting VID input voltage to VRM10
[ 40.434569] Adding 2096440k swap on /dev/sdb7. Priority:-1 extents:1 across:2096440k
[ 41.025045] EXT3 FS on sdb6, internal journal
[ 41.274630] device-mapper: uevent: version 1.0.3
[ 41.274678] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
[ 43.084559] PPP generic driver version 2.4.2
[ 43.126879] NET: Registered protocol family 17
[ 43.183850] NET: Registered protocol family 10
[ 43.184235] lo: Disabled Privacy Extensions
[ 44.769463] No dock devices found.
[ 47.249220] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 47.249229] apm: overridden by ACPI.
[ 53.315817] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 55.568705] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 56.439587] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 56.439617] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 56.440648] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 57.866133] usbcore: registered new interface driver wacom
[ 57.866145] /build/buildd/linux-2.6.24/drivers/input/tablet/wacom_sys.c: v1.47:USB Wacom Graphire and Wacom Intuos tablet driver
[ 63.437692] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 63.437724] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 63.437774] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 65.691263] eth0: no IPv6 routers present
[ 69.414440] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 69.414470] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 69.414517] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 76.182585] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 76.182613] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 76.182660] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 87.895655] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 87.895684] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 87.895731] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[ 103.604882] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[ 103.604911] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[ 103.604959] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode


cat /var/log/syslog | grep GLib:

Feb 9 00:19:19 ugplinux gdmgreeter[31250]: GLib-GObject-CRITICAL: g_object_get_qdata: assertion `G_IS_OBJECT (object)' failed
Feb 9 00:19:19 ugplinux gdmgreeter[31250]: GLib-GObject-CRITICAL: g_object_set_qdata_full: assertion `G_IS_OBJECT (object)' failed

Feb 9 00:32:22 ugplinux gdmgreeter[402]: GLib-GObject-CRITICAL: g_object_get_qdata: assertion `G_IS_OBJECT (object)' failed
Feb 9 00:32:22 ugplinux gdmgreeter[402]: GLib-GObject-CRITICAL: g_object_set_qdata_full: assertion `G_IS_OBJECT (object)' failed

Feb 9 00:32:27 ugplinux gdm[430]: GLib-GObject-CRITICAL: g_object_get_qdata: assertion `G_IS_OBJECT (object)' failed
Feb 9 00:32:27 ugplinux gdm[430]: GLib-GObject-CRITICAL: g_object_set_qdata_full: assertion `G_IS_OBJECT (object)' failed



Just ask me if need other information for want know.

Thank for your attention and your time.;)

good5209
February 19th, 2010, 04:38 PM
push and cross finger...