wolfgangpauli
February 9th, 2010, 06:17 PM
Hi,
I just upgraded to karmic the other week and now my webcam isn't working anymore.
here is my dmesg output
[ 1369.080502] pwc: Philips webcam module version 10.0.13 loaded.
[ 1369.080505] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[ 1369.080507] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[ 1369.080509] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[ 1369.465918] pwc: Logitech QuickCam Notebook Pro USB webcam detected.
[ 1369.465948] pwc: Registered as /dev/video0.
[ 1369.479354] input: PWC snapshot button as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/input/input8
[ 1369.479419] usbcore: registered new interface driver Philips webcam
[ 1396.679726] pwc: isoc_init() submit_urb 0 failed with error -28
[ 1396.679734] pwc: isoc_init() submit_urb 1 failed with error -28
the last two lines are added whenever I try to run mplayer or skype on the webcam.
We are currently using uname -r: 2.6.31-19-generic (64 bit), but the problem was the same on 2.6.31-17-generic
any ideas?
I just upgraded to karmic the other week and now my webcam isn't working anymore.
here is my dmesg output
[ 1369.080502] pwc: Philips webcam module version 10.0.13 loaded.
[ 1369.080505] pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[ 1369.080507] pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[ 1369.080509] pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[ 1369.465918] pwc: Logitech QuickCam Notebook Pro USB webcam detected.
[ 1369.465948] pwc: Registered as /dev/video0.
[ 1369.479354] input: PWC snapshot button as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/input/input8
[ 1369.479419] usbcore: registered new interface driver Philips webcam
[ 1396.679726] pwc: isoc_init() submit_urb 0 failed with error -28
[ 1396.679734] pwc: isoc_init() submit_urb 1 failed with error -28
the last two lines are added whenever I try to run mplayer or skype on the webcam.
We are currently using uname -r: 2.6.31-19-generic (64 bit), but the problem was the same on 2.6.31-17-generic
any ideas?