adamg2000
January 24th, 2010, 03:10 AM
Hi All, this is my first post so please be gentle. I converted to Ubuntu from OSX a few weeks ago and have been having the time of my life. Just love the freedom. Been enjoying all sorts of tricks and new tools and games. However I moved the computer to another house and when I started it, I got the following: DISK BOOT FAILURE, INSERT SYSTEM DISK...
I've searched around, and found a variety of articles in the forum etc on this, though am struggling to figure out what to do next as I cannot fix the issue. The computer is a self built one with two hard drives, no other OSs installed (except for a web development copy of winxp in VirtualBox).
I've been able to get into my installation of Ubuntu using the LiveCD, choosing 'Boot to first Disk' - I changed the bios to boot from CD-ROM to get that far.
One previous poster (who's problem was solved) was asked run the boot_info_script script, so I pre-empted that request and have added it below. I read it in an attempt to understand it, but I can't make anything much out of it - I can see that it describes the installation as I made it. Any assistance would be very gratefully received.
--------------
============================= Boot Info Summary: ==============================
=> Grub 1.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #1 for /grub.
=> Windows is installed in the MBR of /dev/sdb
sda1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs: /grub/grub.cfg /grub/core.img
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x000ad394
Partition Boot Start End Size Id System
/dev/sda1 * 63 9,992,429 9,992,367 83 Linux
/dev/sda2 9,992,430 234,436,544 224,444,115 5 Extended
/dev/sda5 9,992,493 17,992,799 8,000,307 82 Linux swap / Solaris
/dev/sda6 17,992,863 234,436,544 216,443,682 83 Linux
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x000ed1d2
Partition Boot Start End Size Id System
/dev/sdb1 63 976,768,064 976,768,002 83 Linux
blkid -c /dev/null: __________________________________________________ __________
/dev/sda1: UUID="0a3a530f-af24-4080-a1c2-1a390ee5bb30" TYPE="ext4"
/dev/sda5: UUID="b10daee7-b04b-496f-b58c-9944410c7720" TYPE="swap"
/dev/sda6: UUID="4d13a8c8-9c95-4d02-83fb-3393178918a1" TYPE="ext4"
/dev/sdb1: UUID="987d01cd-084d-4133-a8f5-b506977e0900" TYPE="ext4"
=============================== "mount" output: ===============================
/dev/sda6 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
/dev/sda1 on /boot type ext4 (rw)
/dev/sdb1 on /home type ext4 (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/adam/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=adam)
/dev/sr0 on /media/cdrom0 type iso9660 (ro,nosuid,nodev,utf8,user=adam)
============================= sda1/grub/grub.cfg: =============================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 4d13a8c8-9c95-4d02-83fb-3393178918a1
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-17-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro quiet splash
initrd /initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-17-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro single
initrd /initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-14-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro quiet splash
initrd /initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-14-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro single
initrd /initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=================== sda1: Location of files loaded by Grub: ===================
.0GB: grub/core.img
.0GB: grub/grub.cfg
.0GB: initrd.img-2.6.31-14-generic
.0GB: initrd.img-2.6.31-17-generic
.0GB: vmlinuz-2.6.31-14-generic
.0GB: vmlinuz-2.6.31-17-generic
=========================== sda6/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 4d13a8c8-9c95-4d02-83fb-3393178918a1
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-17-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro quiet splash
initrd /initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-17-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro single
initrd /initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-14-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro quiet splash
initrd /initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-14-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro single
initrd /initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda6/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda6 during installation
UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=0a3a530f-af24-4080-a1c2-1a390ee5bb30 /boot ext4 defaults 0 2
# /home was on /dev/sdb1 during installation
UUID=987d01cd-084d-4133-a8f5-b506977e0900 /home ext4 defaults 0 2
# swap was on /dev/sda5 during installation
UUID=b10daee7-b04b-496f-b58c-9944410c7720 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sda6: Location of files loaded by Grub: ===================
9.2GB: boot/grub/core.img
9.2GB: boot/grub/grub.cfg
9.2GB: boot/initrd.img-2.6.31-14-generic
9.2GB: boot/initrd.img-2.6.31-17-generic
9.2GB: boot/vmlinuz-2.6.31-14-generic
9.2GB: boot/vmlinuz-2.6.31-17-generic
9.2GB: initrd.img
9.2GB: initrd.img.old
9.2GB: vmlinuz
9.2GB: vmlinuz.old
I've searched around, and found a variety of articles in the forum etc on this, though am struggling to figure out what to do next as I cannot fix the issue. The computer is a self built one with two hard drives, no other OSs installed (except for a web development copy of winxp in VirtualBox).
I've been able to get into my installation of Ubuntu using the LiveCD, choosing 'Boot to first Disk' - I changed the bios to boot from CD-ROM to get that far.
One previous poster (who's problem was solved) was asked run the boot_info_script script, so I pre-empted that request and have added it below. I read it in an attempt to understand it, but I can't make anything much out of it - I can see that it describes the installation as I made it. Any assistance would be very gratefully received.
--------------
============================= Boot Info Summary: ==============================
=> Grub 1.97 is installed in the MBR of /dev/sda and looks on the same drive
in partition #1 for /grub.
=> Windows is installed in the MBR of /dev/sdb
sda1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs: /grub/grub.cfg /grub/core.img
sda2: __________________________________________________ _______________________
File system: Extended Partition
Boot sector type: -
Boot sector info:
sda5: __________________________________________________ _______________________
File system: swap
Boot sector type: -
Boot sector info:
sda6: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System: Ubuntu 9.10
Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img
sdb1: __________________________________________________ _______________________
File system: ext4
Boot sector type: -
Boot sector info:
Operating System:
Boot files/dirs:
=========================== Drive/Partition Info: =============================
Drive: sda ___________________ __________________________________________________ ___
Disk /dev/sda: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x000ad394
Partition Boot Start End Size Id System
/dev/sda1 * 63 9,992,429 9,992,367 83 Linux
/dev/sda2 9,992,430 234,436,544 224,444,115 5 Extended
/dev/sda5 9,992,493 17,992,799 8,000,307 82 Linux swap / Solaris
/dev/sda6 17,992,863 234,436,544 216,443,682 83 Linux
Drive: sdb ___________________ __________________________________________________ ___
Disk /dev/sdb: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x000ed1d2
Partition Boot Start End Size Id System
/dev/sdb1 63 976,768,064 976,768,002 83 Linux
blkid -c /dev/null: __________________________________________________ __________
/dev/sda1: UUID="0a3a530f-af24-4080-a1c2-1a390ee5bb30" TYPE="ext4"
/dev/sda5: UUID="b10daee7-b04b-496f-b58c-9944410c7720" TYPE="swap"
/dev/sda6: UUID="4d13a8c8-9c95-4d02-83fb-3393178918a1" TYPE="ext4"
/dev/sdb1: UUID="987d01cd-084d-4133-a8f5-b506977e0900" TYPE="ext4"
=============================== "mount" output: ===============================
/dev/sda6 on / type ext4 (rw,errors=remount-ro)
proc on /proc type proc (rw)
none on /sys type sysfs (rw,noexec,nosuid,nodev)
none on /sys/fs/fuse/connections type fusectl (rw)
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/security type securityfs (rw)
udev on /dev type tmpfs (rw,mode=0755)
none on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620)
none on /dev/shm type tmpfs (rw,nosuid,nodev)
none on /var/run type tmpfs (rw,nosuid,mode=0755)
none on /var/lock type tmpfs (rw,noexec,nosuid,nodev)
none on /lib/init/rw type tmpfs (rw,nosuid,mode=0755)
/dev/sda1 on /boot type ext4 (rw)
/dev/sdb1 on /home type ext4 (rw)
binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw,noexec,nosuid,nodev)
gvfs-fuse-daemon on /home/adam/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=adam)
/dev/sr0 on /media/cdrom0 type iso9660 (ro,nosuid,nodev,utf8,user=adam)
============================= sda1/grub/grub.cfg: =============================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 4d13a8c8-9c95-4d02-83fb-3393178918a1
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-17-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro quiet splash
initrd /initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-17-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro single
initrd /initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-14-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro quiet splash
initrd /initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-14-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro single
initrd /initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=================== sda1: Location of files loaded by Grub: ===================
.0GB: grub/core.img
.0GB: grub/grub.cfg
.0GB: initrd.img-2.6.31-14-generic
.0GB: initrd.img-2.6.31-17-generic
.0GB: vmlinuz-2.6.31-14-generic
.0GB: vmlinuz-2.6.31-17-generic
=========================== sda6/boot/grub/grub.cfg: ===========================
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
### BEGIN /etc/grub.d/00_header ###
if [ -s /boot/grub/grubenv ]; then
have_grubenv=true
load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
saved_entry=${prev_saved_entry}
save_env saved_entry
prev_saved_entry=
save_env prev_saved_entry
fi
insmod ext2
set root=(hd0,6)
search --no-floppy --fs-uuid --set 4d13a8c8-9c95-4d02-83fb-3393178918a1
if loadfont /usr/share/grub/unicode.pf2 ; then
set gfxmode=640x480
insmod gfxterm
insmod vbe
if terminal_output gfxterm ; then true ; else
# For backward compatibility with versions of terminal.mod that don't
# understand terminal_output
terminal gfxterm
fi
fi
if [ ${recordfail} = 1 ]; then
set timeout=-1
else
set timeout=10
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/05_debian_theme ###
set menu_color_normal=white/black
set menu_color_highlight=black/white
### END /etc/grub.d/05_debian_theme ###
### BEGIN /etc/grub.d/10_linux ###
menuentry "Ubuntu, Linux 2.6.31-17-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-17-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro quiet splash
initrd /initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-17-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-17-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro single
initrd /initrd.img-2.6.31-17-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-14-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro quiet splash
initrd /initrd.img-2.6.31-14-generic
}
menuentry "Ubuntu, Linux 2.6.31-14-generic (recovery mode)" {
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
insmod ext2
set root=(hd0,1)
search --no-floppy --fs-uuid --set 0a3a530f-af24-4080-a1c2-1a390ee5bb30
linux /vmlinuz-2.6.31-14-generic root=UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 ro single
initrd /initrd.img-2.6.31-14-generic
}
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
linux16 /memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
linux16 /memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###
### BEGIN /etc/grub.d/30_os-prober ###
if [ ${timeout} != -1 ]; then
if keystatus; then
if keystatus --shift; then
set timeout=-1
else
set timeout=0
fi
else
if sleep --interruptible 3 ; then
set timeout=0
fi
fi
fi
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
=============================== sda6/etc/fstab: ===============================
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# / was on /dev/sda6 during installation
UUID=4d13a8c8-9c95-4d02-83fb-3393178918a1 / ext4 errors=remount-ro 0 1
# /boot was on /dev/sda1 during installation
UUID=0a3a530f-af24-4080-a1c2-1a390ee5bb30 /boot ext4 defaults 0 2
# /home was on /dev/sdb1 during installation
UUID=987d01cd-084d-4133-a8f5-b506977e0900 /home ext4 defaults 0 2
# swap was on /dev/sda5 during installation
UUID=b10daee7-b04b-496f-b58c-9944410c7720 none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto,exec,utf8 0 0
=================== sda6: Location of files loaded by Grub: ===================
9.2GB: boot/grub/core.img
9.2GB: boot/grub/grub.cfg
9.2GB: boot/initrd.img-2.6.31-14-generic
9.2GB: boot/initrd.img-2.6.31-17-generic
9.2GB: boot/vmlinuz-2.6.31-14-generic
9.2GB: boot/vmlinuz-2.6.31-17-generic
9.2GB: initrd.img
9.2GB: initrd.img.old
9.2GB: vmlinuz
9.2GB: vmlinuz.old