View Full Version : [all variants] 9.10 Fresh install freeze
micio
January 12th, 2010, 02:50 PM
Hi all!
I tried a lot of time to install the 9.10 on my desktop, but after a few it freeze and I have no possibility to understand what is the problem because I can't find any useful information in the logs files.
It happens since ubuntu 9.04 on all variants... on the same machine I have 3 OS
sda1 k/ubuntu 9.10 (randomly freeze)
sda2 Vista OS (works fine.. of course, some bluescreen here and there, but it is windows :) )
sda3 Ubuntu 8.10 Intrepid (It works like a charm!!! no freeze, no slowdown, it is the best os I ever seen and tried! And it is on that machine from 2 years ago)
My Hardware is
MB. Asus p5k Premium wifi/ap (Bios rev 1101 Last available)
cpu Intel q6600 @2.4 Ghz
Video: Nvidia 8800 GT
4 GB RAM OCZ
Terratec T-stick TV receiver
3 SATA HD
1 IDE HD
May you have some suggestion?
What can I do to discover what is going wrong and find a solution?
What has been changed sing 9.04 version?
Let me know if you need additional informations.
Thanks in advance
Micio
micio
January 13th, 2010, 10:07 AM
Bump!
micio
January 15th, 2010, 12:05 AM
anyone can help me?
SethK
April 6th, 2010, 02:04 AM
I am also running into a very similar problem.
When your desktop freezes, can you still run a terminal?
shaka_zulu
April 6th, 2010, 02:06 AM
Did you run Live CD or you have tried to install it directly?
pbrugs
April 6th, 2010, 04:02 AM
I've had similar problems with kubuntu installed inside ubuntu. It would happen randomly when I changed settings or tried to use the internet.
parn
April 6th, 2010, 04:08 AM
I experience the same problem before installing ubuntu 9.10 from Live CD.
After pulling most of my hair out... I did a md5sum on the iso I downloaded and found that the iso was corrupted >.<"
oldefoxx
April 6th, 2010, 04:35 AM
I found some similar problems with 9.10 a good while back, and going to 9.04 got me around that. Another thing was sometimes related to whether you elected to manually install to a partition and decided not to format it, possibly hoping to preserve /home and everything under it. I got the distinct impression that some non-/home folders and files might have survived and had a negative impact on the install that followed.
A format of the target partition would take care of this. CDs and DVDs can be a problem area as well. Usually it is skin oils and fingerprints that create problems here. A light wash in mild soapy water and thorough rince and dry that leave no water marks can clean these enough to make them usable again, but I usually burn multiple copies anyway just to play it safe.
-humanaut-
April 6th, 2010, 07:37 AM
Are you using the 64bit iso? I had an identical problem when I was trying to install from the 64bit version when I went back to a 32bit verson all the problems disappeared.
shaka_zulu
April 6th, 2010, 11:41 AM
From my experience in 99% of all cases the problem is in the bad quality of CD/DVD or corrupted ISO file. Also SethK has a problem but he didn't say that he used alternate CD for fresh install which is, i highly believe, a very wrong since alternate CD is not for fresh install. I hope that you are not using the same one. Also if you have problem installing from Live CD try to install it directly before going with Live. I am also suggesting that you make whole process from USB flash stick. I it faster and safer in the same time.
micio
April 7th, 2010, 04:44 PM
uffff...
I have no words... :confused:
It freezes randomly after install...
it freezes during liveCD execution..
It freezes during a direct install (same live cd but direct install)
And I tried also 10.04 Beta1 and I still got the same problem...
There could be something in our Hardware configuration.. I don't know.. I tried also to remove Overclock from bios and/or upgrade bios firmware..
Now I'm starting to pull out some PCI like wifi (I don't need it anymore..)
There is some way to log everything happens like a debug mode? :popcorn:
Thanks
Micio
micio
April 8th, 2010, 08:31 AM
Maybe it is too soon to say YEAH, but at first sight I get it sorted by removing a wifi PCI (athereos)
I made it because a lot of messages in kern.log and syslog about
ath5k noise floor calibration... blablabla
Well, I will keep you updated :)
byez!
Powered by vBulletin® Version 4.2.2 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.